Stable partial nitritation of mature landfill leachate in a continuous flow bioreactor: Long-term performance,microbial community evolution,and mechanisms

A continuous flow bioreactor was operated for 300 days to investigate partial nitritation (PN) of mature landfill leachate, establishing the long-term performance of the system in terms of the microbial community composition, evolution, and interactions. The stable operation phase (31–300 d) began after a 30 days of start-up period, reaching an average nitrite accumulation ratio (NAR) of 94.43% and a ratio of nitrite nitrogen to ammonia nitrogen (NO₂⁻-N/NH₄⁺-N) of 1.16. Some fulvic-like and humic-like compounds and proteins were effectively degraded in anaerobic and anoxic tanks, which was consistent with the corresponding abundance of methanogens and syntrophic bacteria in the anaerobic tank, and organic matter degrading bacteria in the anoxic tank. The ammonia-oxidizing bacteria (AOB) Nitrosomonas was found to be the key functional bacteria, exhibiting an increase in abundance from 0.27% to 6.38%, due to its collaborative interactions with organic matter degrading bacteria. In-situ inhibition of nitrite-oxidizing bacteria (NOB) was achieved using a combination of free ammonia (FA) and free nitrous acid (FNA), low dissolved oxygen (DO) with fewer bioavailable organics conditions were employed to maintain stable PN and a specific ratio of NO₂⁻-N/NH₄⁺-N, without an adverse impact on AOB. The synergistic relationships between AOB and both denitrifying bacteria and organic matter degrading bacteria, were found to contribute to the enhanced PN performance and microbial community structure stability. These findings provide a theoretical guidance for the effective application of PN-Anammox for mature landfill leachate treatment.     

Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process

A study was conducted on the treatment of landfill leachate by combining the sequencing batch biofilm reactor (SBBR) method with the electro-Fenton method. The reduction of chemical oxygen demand (COD), biological oxygen demand (BOD₅), and ammonia nitrogen (NH ₄ ⁺ -N) from the leachate by the SBBR method was investigated. For the electro-Fenton experiment, the changes in COD and total organic carbon (TOC) with the increase in H₂O₂ dosage and electrolysis time under optimal conditions were also analysed. The results showed that the average efficiencies of reduction of COD, BOD₅, and NH ₄ ⁺ -N achieved using the SBBR method were 21.6 %, 54.7 %, and 56.1 %, respectively. The bio-effluent was degraded by the subsequent electro-Fenton process, which was rapid over the first 30 min then subsequently slowed. After 60 min of the electro-Fenton treatment, the efficiencies of reduction of TOC, COD, and BOD₅ were 40.5 %, 71.6 %, and 61.0 %, respectively. There is a good correlation between the absorbance of leachate at 254 nm (UV₂₅₄) and COD or TOC during the electro-Fenton treatment.     

Absorption of ammonia on tantalum hydroxide synthesized by a hydrofluoric acid method

Ammonia is strongly absorbed on tantalum hydroxide prepared by ammonia neutralization of TaF₇ ²⁻ or TaF₆ ⁻ complexes. FTIR analysis of tantalum hydroxide shows a characteristic peak around 1,400 cm⁻¹, attributed to NH₄ ⁺. TG and FTIR analyses show that the NH₄ ⁺ decomposes at about 500 °C. The correct chemical formula of tantalum hydroxide prepared by ammonia neutralization of TaF₇ ²⁻ or TaF₆ ⁻ is thus TaO _x (OH)_5-x (NH₄) _x . This conclusion is also confirmed by TG and FTIR analysis of tantalum hydroxide treated with various concentrations of inorganic acid at room temperature. The NH₄ ⁺ in tantalum hydroxide can be exchanged completely in aqueous HNO₃ solution, and the weight loss of the resulting sample is ended at about 415 °C by TG analysis. The NH₄ ⁺ can also be exchanged completely with aqueous H₂SO₄ solution; however, SO₄ ²⁻ is weakly absorbed on the tantalum hydroxide. Finally, the NH₄ ⁺ can be exchanged partially with aqueous H₃PO₄ solution; however, PO₄ ³⁻ is strongly absorbed on the tantalum hydroxide.     

A simplified version of the total kjeldahl nitrogen method using an ammonia extraction ultrasound-assisted purge-and-trap system and ion chromatography for analyses of geological samples

The total Kjeldahl nitrogen (TKN) method was simplified by using a manifold connected to a purge-and-trap system immersed into an ultrasonic (US) bath for simultaneous ammonia (NH₃) extraction from many previously digested samples. Then, ammonia was collected in an acidic solution, converted to ammonium (NH₄⁺), and finally determined by ion chromatography method. Some variables were optimized, such as ultrasonic irradiation power and frequency, ultrasound-assisted NH₃ extraction time, NH₄⁺ mass and sulfuric acid concentration added to the NH₃ collector flask. Recovery tests revealed no changes in the pH values and no conversion of NH₄⁺ into other nitrogen species during the irradiation of NH₄Cl solutions with 25 or 40 kHz ultrasonic waves for up to 20 min. Sediment and oil free sandstone samples and soil certified reference materials (NCS DC 73319, NCS DC 73321 and NCS DC 73326) with different total nitrogen concentrations were analysed. The proposed method is faster, simpler and more sensitive than the classical Kjeldahl steam distillation method. The time for NH₃ extraction by the US-assisted purge-and-trap system (20 min) was half of that by the Kjeldahl steam distillation (40 min) for 10 previously digested samples. The detection limit was 9 μg g⁻¹ N, while for the Kjeldahl classical/indophenol method was 58 μg g⁻¹ N. Precision was always better than 13%. In the proposed method, carcinogenic reagents are not used, contrarily to the indophenol method. Furthermore, the proposed method can be adapted for fixed-NH₄⁺ determination.     

Enthalpy changes of salting processes of hen-egg white lysozyme in various electrolyte solutions

The enthalpy changes of salting process of hen-egg white lysozyme in buffer acetate solutions (pH=4.25) as a function of concentration of following electrolytes: LiCl, KCl, K₂SO₄, Li₂ SO₄ and (NH₄)₂SO₄ are determined. Obtained data according to McMillan and Mayer’s approach, has been analyzed in the terms of the enthalpic pairwise interaction coefficients: lysozyme – lysozyme h_xx, and lysozyme – salt h_xy. The ability of cations to precipitate lysozyme solution in relation to the concentration of cations can be seen from the series as follows: Li⁺> Na⁺>K⁺>NH₄+⁺     

Simultaneous Determination of Sodium,Potassium, and Ammonium Ions by Automated Direct Potentiometry

Abstract

Sodium, potassium and ammonium ions, in concentration ranges of natural and waste water samples, have been simultaneously determined by direct potentiometry, using sodium, potassium, and ammonia ion-sensitive electrodes. The results are printed out as concentration units directly from an automated continuous -flow system with on-line minicomputer and printer. The optimum sampling rate is 20 samples or 60 determinations per hour. Various water samples have been analyzed and the results compared to those obtained by the standard methods. The lower detection limits were 0.1 ppm for Na⁺ and NH₄ ⁺ and 1.0 ppm for K⁺. The values of standard deviation were < 10%, with the exception of the lowest concentrations. The relative error was in the range of ± 2%. The correlation of standard and proposed methods was very good.     

Analytical application of ion-molecule reactions. Reactions of various substituted cyclopropane molecular ions with ammonia

By ion cyclotron resonance it is found that various substituted cy clopropanes after ionization react with ammonia to give products which allow identification of the degree and kind ofsubstitution on the cyclopropl ring. For example, cyclopropyle reacts to give [CH₂NH₂]⁺ (m/e 30), methylcyclopropane gives [CH₂NH₂]⁺ (m/e 30) and the ethyl substituted [CH(C₂H₃)NH₂]⁺ (m/e 44) and ethylopropane gives [CH₂NH₂]⁺ (m/e 30) and the ethyl substituted [CH(C₂H₅)NH₂]⁺ (m/e 58). It is suggested that reactions of stable molecular ions with reagent neutrals may be a source of highly specific structural information for organic compounds.     

Interaction of immobilized 2,8,14,20-tetramethyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene with Na+, Cs+, and NH4 + ions and organic cations

The equilibrium in the system water—electrolyte—cross-linked polymer containing immobilized 2,8,14,20-tetramethyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene was studied. Immobilized calixarene 1 was shown to form 1∶1, 1∶2, 1∶3, and 1∶4 compounds with inorganic cations (Na⁺, Cs⁺, and NH₄ ⁺), and with organic cations (hexamethylen-tetramine and β-diethylaminoethylp-aminobenzoate) 1∶1 compounds are formed. The affinity of immobilized calixarene1 increases in the series of cations: hexamethylenetetramine <Na⁺, Cs⁺, NH₄ ⁺<β-diethylaminoethylp-aminobenzoate. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2214–2216, November, 1998.     

Determination of237Np in environmental samples using inductively coupled plasma mass spectrometry

Ammonium uranates (AU) obtained by the addition of aqueous NH₄ OH to a solution of UO₂ (NO₃)₂ or the equilibrium reaction of UO₃ · 2H₂ O with the vapour over concentrated NH₄ OH have been studied by X-ray diffraction (XRD) analysis, diffuse reflectance Fourier transform infrared spectrometry (DR-FTIR) and chemical analysis. Ammonia can be present as either NH₃ or NH ₄ ⁺ . For precipitates obtained at a pH of 3.7, ammonia in the form of NH₃ is predominant. For ammonium uranate obtained by reaction over concentrated NH₄OH, most of the ammonia is bonded as NH ₄ ⁺ . The reaction mechanism and structures of the products are also discussed.     

Dissolution of uranium oxides under alkaline oxidizing conditions

Bench scale experiments were conducted to determine the dissolution characteristics of UO₂, U₃O₈, and UO₃ in aqueous peroxide-containing carbonate solutions. The experimental parameters investigated included carbonate countercation (NH₄ ⁺, Na⁺, K⁺, and Rb⁺) and H₂O₂ concentration. The carbonate countercation had a dramatic influence on the dissolution behavior of UO₂ in 1 M carbonate solutions containing 0.1 M H₂O₂, with the most rapid dissolution occurring in (NH₄)₂CO₃ solution. The initial dissolution rate (y) of UO₂ in 1 M (NH₄)₂CO₃ increased linearly with peroxide concentration (x) ranging from 0.05 to 2 M according to: y = 2.41x + 1.14. The trend in initial dissolution rates for the three U oxides under study was UO₃ ≫ U₃O₈ > UO₂.     

Separation of silver from waste waters by ion-exchange resins and concentration by microbial cells

Summary Waste waters of film processing plants are rich with silver. Part of the silver is regenerated electrochemically, but the rest (0.5 g) remains in waste waters and is sent to sewers. This is a bad politic from both the environmental (toxic waste waters) and the economical point of view (a waste of silver). In this work, the silver was isolated by ion-exchange resins and then concentrated by microorganisms. For exchange of silver, Ionenaustauscher I, II and IV were used. The batch method was used to obtain a static equilibrium. Silver elution from exchangers is based on silver transformation to a stable cation or anion complex. By varying the ligands, pH and eluent concentrations, optimum elution is found at 1 mol/l Na₂S₂O₃, 1 mol/l NH₃, 2 mol/l HNO₃ and 1 mol/l (NH₂)₂CO. The concentration of silver in the eluent is about 50 mg/l. The silver ion uptake from solutions after ion exchange by mixed bacterial culture isolated from photographic waste water drain and pure bacterial cultures Escherichia coli 3009 and Bacillus subtilis 3053. was studied. Experiments were carried out in submerse culture at pH 7 with different Ag⁺ concentrations (4, 8 and 40 mg/l) on a rotary shaker (100 rpm) at 37°C. At the lower Ag⁺ concentrations a good growth and simultaneous removal of Ag⁺ from the solutions was achieved. At Ag⁺ concentration of 40 mg/l growth and removal of Ag⁺ by mixed and pure culture differed significantly. Thus mixed bacterial culture grew well and at the same time removed efficiently Ag⁺ (approximately 90%) from medium. Pure bacterial cultures on the contrary were unable to grow at 40 mg/l Ag⁺, though their biomass showed to be an effective biosorbent for Ag⁺ (approximately 80% of Ag⁺ removal).     

Kinetics and Mechanism of Electroreduction of Ammonia Complexes of Cobalt(II) on a Dropping Mercury Electrode

Effects of concentrations of ammonia (0.3–5.8 M) and supporting electrolytes (NaF, NaClO₄; 0.1–0.5 M) on the kinetics of electroreduction of ammonia complexes of cobalt(II) at a dropping mercury electrode are studied. Most experiments are performed with low concentrations of cobalt(II) complexes (1 × 10^–5 to 2 × 10^–5 M) in the absence of a polarographic maximum. The dependence of the half-wave potential of the reversible cathodic wave pertaining to the reduction of ammonia complexes of cobalt(II) on the concentration of ammonia molecules is obtained. It is found from the dependence that, at ammonia concentrations of 0.5–2.6 M, the slow electrochemical stage involves predominantly complexes Co(NH₃)₂ ²⁺. At higher ammonia concentrations, the stage involves complexes Co(NH₃) _k ²⁺ (k > 2), which form in preceding chemical stages from complexes Co(NH₃) _i ²⁺ (i = 3–6) that are predominant in solution. Values of the diffusion coefficients for complexes Co(NH₃) _i ²⁺, apparent transfer coefficients, and rate constant of the process of electroreduction of ammonia complexes of cobalt(II) are determined. The reasons for the complicating effect the insoluble products of reduction of cobalt(II) complexes have on the shape of polarographic waves are discussed.     

Capillary electrophoretic determination of ammonia using headspace single-drop microextraction

A new method involving headspace single-drop microextraction (SDME) and capillary electrophoresis (CE) is developed for the preconcentration and determination of ammonia (as dissolved NH₃ and ammonium ion). An aqueous microdrop (5 μL) containing 1 mmol/L H₃PO₄ and 0.5 mmol/L KH₂PO₄ (as internal standard) was used as the acceptor phase. Common experimental parameters (sample and acceptor phase pH, extraction temperature, extraction time) affecting the extraction efficiency were investigated. Proposed SDME-CE method provided about 14-fold enrichment in about 20 min. The calibration curve was linear for concentrations of NH₄⁺ in the range from 5 to 100 μmol/L (R² = 0.996). The LOD (S / N = 3) was estimated to be 1.5 μmol/L of NH₄⁺. Such detection sensitivity is high enough for ammonia determination in common environmental and biological samples. Finally, headspace SDME was applied to determine ammonia in human blood, seawater and milk samples with spiked recoveries in the range of 96-107%.     

Die Reaktion von Phenylimino-phosphorsäure-trichlorid mit Ammoniak

Zusammenfassung Dimeres Phenylimino-phosphorsäure-trichlorid reagiert mit wasserfreiem, flüssigem NH₃ in exothermer Reaktion zu {[PhNHP(NH₂)₂]₂N}⁺Cl^–. Bei der thermischen Kondensation dieser Verbindung bei 200°/0,1 Torr entsteht unter Abspaltung von Ammoniumchlorid, Ammoniak und Anilin eine Verbindung der Zusammensetzung (PhN)_1,1P₂N₂(NH)_1,4.

---

Dimeric phenylimino phosphoric acid trichloride reacts with dry liquid ammonia to {[PhNHP(NH₂)₂N]₂N}⁺Cl^–. Thermal condensation of this compound at 200°/0,1 Torr gives (PhN)_1,1P₂N₂ (NH)_1,4 under loss of ammoniumchloride, ammonia and aniline. *** DIRECT SUPPORT *** A3615112 00009

     

Electrochemistry of solutions in liquid ammonia. Part VII. The use of glass electrodes for ammonium and sodium cations as ion-selective sensors at −40 °C

The behavior of Li/La glass electrodes as specific ion sensors for NH ₄ ⁺ and Na⁺ cations in liquid ammonia solutions at –40°C has been assessed using concentration cells with transference. The measurement of emf's of cells with very high resistances due to glass at –40°C has been overcome partly by the use of thinly blown Li/La glass and mainly through the design and use of a floating shield emf measuring system. For solutions of NH₄NO₃, NH₄I, NH₄BF₄, and NH₄Cl almost linear pNH₄ vs. emf responses were observed between pNH₄ 0 and 5; for NH₄NO₃ solutions the slope (40±1 mV/pNH₄) was invariant for substantial increases in Na⁺ concentrations. Solutions of NaNO₃, NaCN, NaClO₄, NaNCS, NaN₃, and NaNO₂ gave almost linear pNa vs. emf responses but the slopes were markedly dependent upon the NH ₄ ⁺ concentration. Estimates of the mean molal ion activity coefficients for nitrate solutions were obtained from earlier transference data: ±(NaNO₃)=0.14±0.02 and ±(NH₄NO₃)=0.30±0.03 at 10^– molal concentration in fair agreement with earlier data.     

Kinetics and mechanisms of chlorine transfer from chloramine to amines in aqueous medium

The kinetics and the equilibrium constant of the chlorine transfer reaction between monochloramine NH₂Cl and the amines: C₂H₅NH₂, (CH₃)₂CHNH₂, (CH₃)₂NH, and (C₂H₅)₂NH are investigated by spectrophotometry in aqueous medium at 25°C, in the pH range from 8 to 13 and for an ionic strength equal to 1.03 ± 0.05M. For a concentration of total ammonia equal to 1M, the observed rate constant is pH independent below 8 and above 12.8 and reaches a maximum located between the pK_as of NH₄⁺ and RR'NH₂⁺. From these results and those obtained earlier for NH₂Cl and CH₃NH₂, the reaction is shown to involve an interaction between neutral molecules NH₂Cl and RR'NH, subject to general acid catalysis. The ability of an interaction corresponding to a specific catalysis and involving NH₃Cl⁺ and RR'NH rather than NH₂Cl and RR'NH₂⁺ is also discussed. The activation parameters are given for each reaction.     

Elektromotorisches Verhalten von Glaselektroden in flüssigem Ammoniak

Glass electrodes behaving as protodes or alkali cation electrodes in aqueous systems respond to the protonated solvent in liquid ammonia at — 38°C and can be used to measure the activity of NH₄⁺. Deviations in the response to the activity of NH₄⁺ are shown to be due to an alkali metal function (alkaline error) of the glass electrodes. The selectivity of glass electrodes for different alkali metal cations changes drastically from water to liquid ammonia.     

Uptake of cesium and strontium radioisotopes onto pillared clays

Pillared clays were characterised by thermal analysis and small-angle X-ray scattering. They were then examined for their ability to take up¹³⁷Cs and⁹⁰Sr/⁹⁰Y isotopes as a function of concentration and competing cations (Na⁺, K⁺, NH₄ ⁺, Ca²⁺, Mg²⁺) in the concentration range 10⁻¹ to 10⁻⁴ M. The radioisotope uptakes were quantified byK _d (ml/g) measurements.     

Enhanced ammonia oxidation on BDD induced by inhibition of oxygen evolution reaction

Electrochemical oxidation of ammonia (NH₃ and NH₄ ⁺ ) on boron-doped diamond (BDD) electrode was studied using differential electrochemical mass-spectrometry (DEMS) and chronoamperometry. Electro-oxidation of ammonia induces inhibition of the oxygen evolution reaction (OER) due to adsorption of the ammonia oxidation products on the BDD surface. The inhibition of the OER enhances ammonia electro-oxidation, which becomes the main reaction. The amino radicals, formed during ammonia oxidation, trigger a reaction chain in which molecular oxygen dissolved in solution is involved in the ammonia electro-oxidation. Nitrogen, nitrous oxide, and nitrogen dioxide were detected as the ammonia oxidation products, with nitrogen being the main gaseous product of the oxidation.     

ESR and TPD Study of the Interaction of Nitromethane and Ammonia with HZSM-5 and CuZSM-5 Zeolites

The properties of complexes formed on HZSM-5 and CuZSM-5 zeolites in the course of ammonia and nitromethane adsorption are studied. Ammonia adsorbs on CuZSM-5 and forms two species, which decompose at different temperatures T _dec. One is due to the formation of the Cu²⁺(NH₃)₄ complex (T _dec = 450 K), and the other is assigned to ammonia adsorbed on copper(II) compounds, Cu²⁺O^– and Cu²⁺–O^2––Cu²⁺, or CuO clusters (T _dec = 650–750 K). Ammonia adsorption on Cu⁺ and Cu⁰ is negligible compared with that on the Brönsted acid sites and copper(II). Nitromethane adsorbed on HZSM-5 and CuZSM-5 at 400–500 K transforms into a series of products including ammonia. Ammonia also forms complexes with the Brönsted acid sites and copper(II) similar to those formed in the course of adsorption from the gas phase, but the Cu²⁺(NH₃)₄ complexes on CuZSM-5 are not observed. Possible structures of ammonia and nitromethane complexes on Brönsted acid sites and the Cu²⁺ cations in zeolite channels are discussed. The role of these complexes in selective NO _x reduction by hydrocarbons over the zeolites is considered in connection with their thermal stability.