Identification of impurities in acarbose by using an integrated liquid chromatography-nuclear magnetic resonance and liquid chromatography-mass spectrometry approach

The usefulness of applying an integrated LC-NMR and LC-MS approach to acarbose bulk drug impurity profiling is demonstrated. LC-MS and LC-NMR methodologies were employed for the online separation and structural elucidation of a final drug product. Combining data provided by the stop-flow LC-NMR and LC-MS experiments made it possible to identify the main components present in the acarbose sample. Spectral analysis revealed that A and B were known impurities while C was an unknown compound. LC-MS and LC-NMR analyses revealed that C was a pentasaccharide differing from the acarbose in number and nature of sugar subunits in the molecule. It was subsequently isolated and its structure was confirmed by the offline 1- and 2-D NMR experiments, and atom assignment was made.     

液相色谱–核磁共振联用技术研究进展

介绍了液相色谱–核磁共振(LC–NMR)联用技术发展状况。讨论了LC–NMR技术应用中面临的问题和解决方法,评述了LC–NMR和LC–SPE–NMR两种工作模式。介绍了LC–NMR在天然产物分析、生物代谢、异构体的鉴定和多聚物分析领域的应用情况,对其发展动态进行了展望。     

High-performance liquid chromatography with nuclear magnetic resonance detection applied to organosilicon polymers. Part 2. Comparison with other methods

LC-NMR utilizing (1)H and (29)Si NMR spectroscopy is ideally suited for the analysis of silicones. It is shown that reversed phase gradient LC-NMR surpasses standard gel permeation chromatography (GPC) and diffusion ordered spectroscopy (DOSY) in the analysis of model hydride terminated polydimethylsiloxane. (1)H and (29)Si NMR in the stopped-flow arrangement leads to full identification of the components. Concentration gradient introduces a dependence of the (29)Si shifts on solvent composition, this dependence can be substantially reduced by a proposed method of referencing. It is shown that the ADEQUATE version of powerful but insensitive 2D INADEQUATE experiment can be used for complete line assignment.     

The rapid identification of isoflavonoids from Belamcanda chinensis by LC-NMR and LC-MS

The use of hyphenated LC-NMR and LC-MS techniques for the purpose of directly identifying the major constituents of Belamcanda chinensis was investigated. Reversed-phase isocratic chromatography was performed using an acetonitrile-water solvent system on a C18 column. The NMR spectrum yielded five main peaks, whose analysis revealed them to be 5, 6, 7, 3'-tetrahydroxy-4'-methoxyisoflavone (1), tectorigenin (2), iristectorigenin A (3), irigenin (4), and irisflorentine (5). The identification of these constituents was confirmed by performing LC-ESI-MS experiment. This study shows that hyphenated LC-NMR and LC-MS can be used for the rapid (70 min) identification of the isoflavonoids.     

Identification of secondary metabolites from Streptomyces violaceoruber TU22 by means of on-flow LC-NMR and LC-DAD-MS

For rapid screening of natural products from Actinomycetes, a combination of on-line couplings LC-NMR, LC-DAD-MS and HPLC-PDA, as well as MALDI-TOF-MS is particularly suitable. Simultaneous use of these coupling techniques provides considerable advantages for the rapid identification of natural compounds in mixtures.The results of our present investigation on secondary metabolite products of Streptomyces violaceoruber TU 22 showed that more than 50% of the identified metabolites are new compounds. The structures of four new polyketides (granaticin C, metenaticin A, B and C) as well as four known ones (granaticin A, granatomycin E, daidzein and genistein) have been elucidated using LC-NMR, LC-MS/MS and -MS(n) techniques in combination with two-dimensional NMR spectroscopy.     

Adsorption interactions of humic acids with biocides

The chemical composition of humic acids from brown coal (Aldrich) was determined by element analysis, ¹³C NMR spectroscopy, and potentiometric titration. The adsorption ability of humic acids with different biocides (cyproconasol, propiconasol, tebuconasol, irgarol 1051, and DCOIT) was studied. The adsorption ability of a mixture of biocides in aqueous solutions was higher than that of the individual components. The limiting concentration of humic acids at which adsorption of biocides was maximum was determined. Adsorption constants were calculated by the Freundlich equation for each biocide in aqueous solution.     

Analysis of highly polar compounds in groundwater samples from ammunition waste sites. Part I-Characterization of the pollutant spectrum

Five groundwater samples from the former ammunition production site at Elsnig, Germany, were analyzed for highly polar components by LC-NMR and LC-MS. A variety of unknown pollutants could be identified. Possibilities and limitations of the combined use of LC-NMR and LC-MS techniques for on-line identification are discussed. Further unknown components were identified through isolation by HPLC cuts and off-line NMR and MS investigations. Most of the polar compounds in the investigated samples could also be quantified.     

LC-NMR coupling technology: recent advancements and applications in natural products analysis

An overview of recent advances in nuclear magnetic resonance (NMR) coupled with separation technologies and their application in natural product analysis is given and discussed. The different modes of LC-NMR operation are described, as well as how technical improvements assist in establishing LC-NMR as an important tool in the analysis of plant-derived compounds. On-flow, stopped-flow and loop-storage procedures are mentioned, together with the new LC-SPE-NMR configuration. The implementation of mass spectrometry in LC-NMR is also useful on account of the molecular weight and fragmentation information that it provides, especially when new plant species are studied. Cryogenic technology and capillary LC-NMR are the other important recent developments. Since the plant kingdom is endless in producing potential drug candidates, development and optimization of LC-NMR techniques convert the study of natural products to a less-time-consuming task, speeding up identification.     

冠醚酮酸和烷酸的合成

本文介绍了在PPA存在下，由B15C5和DB18C6同过量的二羧酸发生酰化作用，得到酮酸1a～e和3a～c。再把所得相应的酮酸1a～e和3a～c利用黄鸣龙法制得4'-(ω－羧基多亚甲基)苯并-15-冠-5(2a～e)和4',4'(5')-二(ω-羧基多亚甲基)二苯并-18-冠-6(4a～c)等一系列ω-冠醚酮酸。     

Direct polycondensation of hydroxybenzoic acids with thionyl chloride in pyridine

The reaction promoted by thionyl chloride and pyridine could selectively activate carboxyl groups of hydroxybenzoic acids to give polyesters of high inherent viscosities up to 3.8. Favorable conditions were studied in terms of the temperatures for the initial reaction with the acids and subsequent aging at room temperature. Copolymers of several combinations of hydroxybenzoic acids with high molecular weights were obtained in quantitative yield by carrying out the polycondensation at 80°C for 3 h. The reaction could also produce high molecular polyesters in a simpler process without the initial activation of dicarboxylic acids by adding a mixture of these monomers to the condensing agent, and a tough film- and fiberforming polymer was obtained from 4,4′-dihydroxyphenylsulfone of low nucleophilicity whose polymer of high molecular weight is difficult to obtain. The process was also successfully applied to the direct copolycondensations of hydroxybenzoic acids, aromatic dicarboxylic acids, and bisphenols to produce polyesters of η_inh up to 5.6.     

Characterization of the aromatic composition of some liquid foods by nuclear magnetic resonance spectrometry and liquid chromatography with nuclear magnetic resonance and mass spectrometric detection

This paper describes the first application of NMR spectroscopy and LC-NMR/MS to the direct analysis of the aromatic composition of beer, grape juice and a wine phenolic extract. NMR spectroscopy provides non-invasive information on the overall aromatic profile and enables the identification of some compounds. However, a more comprehensive assignment is hindered by the low peak intensity and strong signal overlap in the low-field spectral region, as well as by the inherent lack of scalar coupling information for many aromatic compounds present. LC-NMR/MS can overcome these problems and is shown to aid significantly in the identification of aromatic compounds composing all samples analyzed. Some examples are the identification of several cinnamic acids (e.g. p-coumaric, trans-coutaric and trans-caftaric) in grape juice, the identification of 2-phenylethanol, tyrosol and tryptophol in beer and the detection of phenolics such as catechin, epicatechin, trans-resveratrol, tyrosol and caffeic acid in the wine extract.     

Analysis of deprotonated acids with silicon nanoparticle-assisted laser desorption/ ionization mass spectrometry

Chemically modified silicon nanoparticles were applied for the laser desorption/negative ionization of small acids. A series of substituted sulfonic acids and fatty acids was studied. Compared to desorption ionization on porous silicon (DIOS) and other matrix-less laser desorption/ionization techniques, silicon nanoparticle-assisted laser desorption/ionization (SPALDI) mass spectrometry allows for the analysis of acids in the negative ion mode without the observation of multimers or cation adducts. Using SPALDI, detection limits of many acids reached levels down to 50 pmol/μl. SPALDI of fatty acids with unmodified silicon nanoparticles was compared to SPALDI using the fluoroalkyl silylated silicon powder, with the unmodified particles showing better sensitivity for fatty acids, but with more low-mass background due to impurities and surfactants in the untreated silicon powder. The fatty acids exhibited a size-dependent response in both SPALDI and unmodified SPALDI, showing a signal intensity increase with the chain length of the fatty acids (C12-C18), leveling off at chain lengths of C18-C22. The size effect may be due to the crystallization of long chain fatty acids on the silicon. This hypothesis was further explored and supported by SPALDI of several, similar sized, unsaturated fatty acids with various crystallinities. Fatty acids in milk lipids and tick nymph samples were directly detected and their concentration ratios were determined by SPALDI mass spectrometry without complicated and time-consuming purification and esterification required in the traditional analysis of fatty acids by gas chromatography (GC). These results suggest that SPALDI mass spectrometry has the potential application in fast screening for small acids in crude samples with minimal sample preparation.     

Association of polyacrylic acids with metronidazole

Intermolecular interactions in mixtures of dilute solutions of poly acids with 1-(β-hydroxyethyl)-2-methyl-5-nitroimidazole were studied by viscometry, potentiometry, and IR spectroscopy. The rheological behavior of dilute aqueous solutions of polyacrylic and polymethacrylic acids and of metronidazole at a total concentration of the components of 0.1 wt % was examined. The composition dependences of the specific viscosity show positive deviations from the additivity with a maximum at approximately 50% relative content of the poly acid. In these mixtures, polyelectrolytic complexes stabilized by hydrogen bonds are formed. The strength of the associates increases with an increase in the temperature to 40°C. Hydrophobic groups in macromolecules of the poly acid play a significant role in stabilization of the complexes. In aqueous solutions metronidazole interacts with acrylic, methacrylic, and hydrochloric acids, and in the solid state it forms linear hydrogen-bonded associates.     

Synthesis of different deuterated carboxylic acids from unsaturated acids promoted by samarium diiodide and D2O

An easy, and rapid reduction of the Cdbond;C bond of alpha,beta-unsaturated acids by means of samarium diiodide in the presence of D(2)O provides an efficient method for synthesizing 2,3-dideuterio acids. Starting from alka-2,4-dienoic acids, (E)-alpha,delta-dideuterio-betagamma-unsaturated acids are obtained, the new Cdbond;C bond being generated with complete diastereoselectivity. When H(2)O is used instead of D(2)O, saturated carboxylic acids and (E)-beta,gamma-unsaturated acids are isolated. A mechanism to explain each synthesis has been proposed.     

Hard modeling methods for the curve resolution of data from liquid chromatography with a diode array detector and on-flow liquid chromatography with nuclear magnetic resonance spectroscopy

Hard modeling methods have been performed on data from high-performance liquid chromatography with a diode array detector (LC-DAD) and on-flow liquid chromatography with 1H nuclear magnetic spectroscopy (LC-NMR). Four methods have been used to optimize parameters to model concentration profiles, three of which belong to classical optimization methods (the simplex method of Nelder-Mead, sequential quadratic programming approach, and Levenberg-Marquardt method), and the fourth is the application of genetic algorithms using real-value encoding. Only classical methods worked well for LC-DAD data, while all of the methods produced good results when LC-NMR data were divided into small spectral windows of peak clusters and parameters were optimized over each window.     

Theoretical investigation of interaction of dicarboxylic acids with common aerosol nucleation precursors

Dicarboxylic acids are important products from photooxidation of volatile organic compounds and are believed to play an important role in the formation and growth of atmospheric secondary organic aerosols. In this paper, the interaction of five dicarboxylic acids, i.e., oxalic acid (C(2)H(2)O(4)), malonic acid (C(3)H(4)O(4)), maleic acid (C(4)H(4)O(4)), phthalic acid (C(8)H(6)O(4)), and succinic acid (C(4)H(6)O(4)), with sulfuric acid and ammonia has been studied, employing quantum chemical calculations, quantum theory of atoms in molecules (QTAIM), and the natural bond orbital (NBO) analysis methods. Several levels of quantum chemical calculations are considered, including coupled-cluster theory with single and double excitations with perturbative corrections for the triple excitations (CCSD(T)) and two density functionals, B3LYP and PW91PW91. The free energies of formation of the heterodimer and heterotrimer clusters suggest that dicarboxylic acids can contribute to the aerosol nucleation process by binding to sulfuric acid and ammonia. In particular, the formation energies and structures of the heterotrimer clusters show that dicarboxylic acids enhance nucleation in two directions, in contrast to monocarboxylic acids.     

Bile acids. LXXVI. Analyses of bile acids and sterols by high-performance liquid chromatography with a microbore column

The mobilities of several free and conjugated 5 beta-bile acids, cholesterol and analogues, and alpha, beta-unsaturated sterols and steroidal acids have been investigated with a microbore reversed-phase high-performance liquid chromatographic column (50 cm X 1 mm I.D., 12% C18) with appropriate solvent mixtures at flow-rates of 50-100 microliter/min and a UV monitor set at 193, 198, 212, or 243 nm. With a solvent mixture of 2-propanol-10 mM phosphate buffer, pH 7.0 (160:340) bile acids or their conjugates were separated in a manner similar to those by microBondapak columns (10% C18). The lower detection limit of the conjugates was 20 pmoles with the UV detector set at 193 nm, whereas the lower limit for alpha, beta-unsaturated keto sterols or steroidal acids was 5 pmoles at 243 nm. The detection limit for cholesterol with the UV monitor at 198 nm was 10 pmoles. Contributions of substituent groups of sterols to their time of elution (capacity factor) were calculated for several substituted 4-cholesten-3-ones.     

Lipase catalyzed synthesis of epoxy-fatty acids

Lipase catalyzed synthesis of epoxy-fatty acids from unsaturat-ed carboxylic acids was investigated. Under mild conditions unsaturated carboxylic acids were converted to peroxycarboxylic acids by lipase with hydrogen peroxide, then the unsaturated peroxycarboxylic acids epoxidised the C = C bond of themselves.     

Application of high-performance liquid chromatography hyphenated techniques for identification of degradation products of cefpodoxime proxetil

Application of the HPLC hyphenated techniques of LC-MS, LC-NMR and solvent-elimination LC-IR was demonstrated by the identification of the degradation products of a third generation cephalosporin antibiotic, cefpodoxime proxetil, in solid state, drug formulation and solution. Molecular weight and fragment information were obtained by LC-MS, and detailed structural information was confirmed by LC-NMR. Information on the carboxyl functional group obtained by solvent-elimination LC-IR was useful for confirmation of the ester hydrolysis. The degradation products were successfully identified without complicated isolation or purification processes.     

(29)Si NMR in LC-NMR analysis of silicones

It is demonstrated using a practical example that indirect detection of (29)Si NMR signals is sufficiently sensitive in LC-NMR stop-flow arrangement to analyze mixtures of siloxane polymers. New cryogenic probes with better signal-to-noise ratio will turn this version of LC-NMR into a routine method for analysis of siloxane polymers.