Copolymerization of N-Phenylmaleimide with Cyclohexene

MalebodeanditSderivatvesarewell-bowntopolyInrizetogivethermallystablepolyTnersandthecopolymeriZationwithvariousvinylmonomershasbeenexaminedtohaProvethethermalpropeniesofthepolymers[';-'].HoweverlessworkhasbeendoneonthecopolyInerizationofN-phenylmaletride(PHMI)withcyclohexene(CH).Inthisletter,wesynthesizedanewcopolymerfromthepolymerizahonofPHMIwithCH.ThemonomerPHMIwaspreparedfrommaleicanhydrideandedlineaccordingtoT.OkadaI41.2,2'-Azobisisobutyronitrile(AIBN)wasrecrystallizedtWicefro…     

Copolymerization of Isobutylene with α-Pinene

The copolymerization of isobutylene with α-pinene has been investigated by using EtA1Cb in ethyl chloride diluent at ca. -105°C. The copolymerizations proceeded readily and gave random copolymers of reasonably high molecular weights. Copolymer homogeneity, composition and structure was investigated by GPC, solubility behavior, PMR (60 and 300 MHz), CMR, reactivity ratio determination, and vulcanization behavior.     

Copolymerization of α-Methylstyrene and Styrene

In this paper, the effects of temperature from 60 °C to 80 °C and the molar ratios in monomer feed on the copolymerization of α-methylstyrene(AMS) and styrene(St) were studied. The resulting copolymers, designated as PAS, were characterized by FTIR, GPC, NMR and TGA. When the reaction temperature was below 75 °C, the molecular weights increased almost linearly as the evolution of the copolymerization. The phenomenon revealed that AMS could mediate the conventional free radical polymerization having some features of a controlled system. As the AMS/St = 50/50(molar) in feed, the overall fraction of the AMS unit incorporated into the copolymer was as high as 42 mol%, the monomer conversion could be more than 90 wt% and the molecular weights could reach as high as 4400. However, since the styrene is more reactive than AMS, the AMS fraction in copolymer increased with the overall monomer conversion. The 13C-NMR revealed the products were random copolymers which had triads, such as-AMS-AMS-AMS-,-St-AMS-AMS-(-AMS-AMS-St-) and-St-AMS-St-. TGA curves demonstrated that the degradation temperature of the resulting copolymers went down from about 356.9 °C(0 mol% AMS) to 250.2 °C(42 mol% AMS). This behavior demonstrated that there exist weak bonds in the AMScontaining sequences which could be used as potential free radical generators.     

Copolymerization and Properties of Multicomponent Crosslinked Hydrogels

A series of multicomponent hydrogels were prepared by the copolymerization of hydrophobic silicon-containing monomer 3-bis(trimethylsilyloxy) methylsilylpropyl glycerol methacrylate(Si MA) with the solvent-responsive monomers 2-hydroxyethyl methacrylate(HEMA) and N-vinyl pyrrolidone(NVP) and thermosensitive monomer N,N-dimethyl acrylamide(DMA). 2-Hydroxy-2-methyl phenyl acetone(D-1173) was chosen as UV initiator and five different dienes/triene monomers were selected as crosslinking agent in order to select the best crosslinker. The ethanol extraction experiments as well as the FTIR, DSC and TG results showed that the copolymerization was effective. The optical, permeability, and mechanical analysis results demonstrated that the obtained hydrogels were highly transparent with good oxygen permeability and mechanical properties. And the impact of crosslinker on the mechanical properties of the hydrogels was also discussed in detail. The basic results demonstrated that the obtained hydrogels had good stimuli-responsive effects to both p H value and solvent.     

Micellar Copolymerization: the State of the Arts

Over the past two decades, hydrophobically modified water-soluble polymers (HMWSPs), particularly hydrophobically associating polyacrylamides (HAPAMs), have attracted increased interest owing to their practical and fundamental importance[1]. This system usually consists of a hydrophilic backbone with a small proportion (generally less than 2 mol %) of hydrophobic pendent groups. When dissolved in aqueous solutions, the apolar moieties tend to exclude water and are held together by intra- a…     

Cross-linking Copolymerization of Acrylic Acid and Multi-armed Cross-linkers

Polymer gels are of considerable interests in material science1-3. Many theoretical and experimental studies have been made on the cross-linking copolymerization4-6 of these systems. Recently, in situ interferometry is applied in studying this process7-9. As shown in Figure 1, the common two-armed cross-linkers will lead to defects in the network, while multi-armed cross-linkers will enhance the integrity of the network. This paper studies the cross-linkers influence on cross-linking and t…     

Anionic Copolymerization of ε-Caprolactam with ω-Laurolactam

Polyamide 6/12 copolymers were prepared by employing two different initiation systems containing activator N-benzoyl-ε-caprolactam (BzCL) and initiator either sodium salt of ε-caprolactam (CLNa) or ε-caprolactam magnesium bromide (CLMgBr). Materials prepared by initiation with CLNa show one melting endotherm and are random copolymers. Materials prepared by initiation with CLMgBr show two melting endotherms and are probably composed from random copolymer and block copolymer containing blocks of random copolymer and blocks of copolymer with ε-caprolactam rich segments. The character of copolymers and fractionalized materials was evaluated by means of DSC and NMR.     

Free Radical–Induced Graft Copolymerization onto Natural Fibers

Surface modification of a natural cellulosic polymer system is required to improve the physicochemical properties of the fibers to be used as reinforcement for green composite applications. Surface modification through graft copolymerization improves the existing properties of the cellulosic fibers for a number of applications. Therefore, in the present study, an attempt was made to synthesize butyl acrylate (BA)-g-Saccaharum cilliare fibers using a redox initiator. Graft copolymers were characterized through FT-IR/SEM/TGA/DTA/DTG techniques, and the effect of grafting percentage on the water absorption properties of raw as well as grafted fibers was also investigated.     

Free Radical Copolymerization of N‐Cyclohexylmaleimide with Cyclohexene

The radical copolymerization of cyclohexene (M₁) and N‐cyclohexylmaleimide (M₂) was carried out with 2,2′‐azobis(isobutyronitrile) as an initiator in various solvents at 55°C. The copolymerization of cyclohexene with N‐cyclohexylmaleimide in chloroform, dioxane and benzene proceeded in a homogeneous system to give an alternating copolymer when the monomer of cyclohexene was over 40 mol% in the feed. It was found that the initial rate of the copolymerization (R_p), as well as the number‐average molecular weight of copolymers, were dependent on the monomer composition and was at maximum at about 30 mol% of cyclohexene in the feed. The effects of solvents on the R_p and reactivity ratios were also investigated in this copolymerization system. The copolymerization in dioxane produced a higher R_p than that in chloroform and benzene, and the monomer reactivity ratios were found to be r₁=0, r₂=0.032 in chloroform; r₁=0, r₂=0.065 in benzene and r₁=0, r₂=0.14 in dioxane, respectively.     

Copolymerization Kinetics of N-Carboxyanhydrides of ε-Benzyloxycarbonyl-L-Lysine and L-Valine

Random copolypeptides have been considered as model compounds to understand, for instance, the conformational preference of individual monomers and the effect of comonomers on the folding of polypeptide chains [1,2]. The kinetics of copolymerization of N-carboxyanhydrides (NCA) of a-amino acids were reviewed earlier [3]. Reactivity ratios have been used in a few cases to determine the sequence length distribution and interchain heterogeneity [4] to arrive at the most probable primary structure for the polypeptide backbone. In the present communication we report the kinetics of copolymerization of e-benzyloxycarbonyl-Llysine NCA and Lvaline NCA in two solvents, dioxane and benzene/methylene chloride.     

Influences of Electrolytes on the Soap-free Emulsion Copolymerization of St-MMA-AA

Monodisperse functional polymer microspheres with different particle size and with clean surface were prepared by batch soap-free emulsion polymerization of styrene, methyl methacrylate and acrylic acid in the presence of salts, and the influences of type and amount of electrolytes on polymerization process and particle morphology were investigated. Results showed that there was a critical concentration for different electrolyte to make polymerization process and the resultant emulsion stable, and the particle size increased with the increase of electrolyte concentration. The effect of metal ions was Ca^2＋〉〉K^＋〉Na^＋〉Li^＋, and the effect of haloids was Br〉Cl〉F. Keywords： Electrolyte, soap-free emulsion polymerization, polystyrene, latex particle morphology.     

Early Transition Metal Catalysis for Olefin–Polar Monomer Copolymerization

Introducing polar functional groups into widely used polyolefins can enhance polymer surface, rheological, mixing, and other properties, potentially upgrading polyolefins for advanced, value-added applications. The metal catalyst-mediated copolymerization of non-polar olefins with polar comonomers represents the seemingly most straightforward, atom- and energy-efficient approach for synthesizing polar functionalized polyolefins. However, electrophilic early transition metal (groups 3 and 4)-catalyzed processes which have achieved remarkable success in conventional olefin polymerizations, encounter severe limitations here, largely associated with the Lewis basicity of the polar co-monomers. In recent years, however, new catalytic systems have been developed and successful strategies have emerged. In this Minireview, we summarize the recent progress in early transition metal polymerization catalyst development, categorized by the catalytic metal complex and polar comonomer identity. Furthermore, we discuss advances in the mechanistic understanding of these polymerizations, focusing on critical challenges and strategies that mitigate them.     

New Catalyst for the Copolymerization of Styrene with Carbon Monoxide

Carbonmonoxide(CO)witholefinscanbec0p0lymerizedwithfreeradicalinitiatorsorn0bletransitionmetalc0mpoundcatalystS.Thefreeradicalinitiatedcopolymerizationunderhighgaspressure(upt0l(X)Mpa)andl2O-l65oC',whereasthemostusednobletransitionmetalcompoundsf0rthec0polymerizati0nofcarbonmonoxidewitholefinsarepalladiumorrhodiumcompounds"'.In0urw0rk,theneodymiumcomp0undcatalystsystemswerefoundt0beactiveforthecopolymerizationofstyreneandcarbonm0noxide.Thecopolymerizationofstyreneandcarbonm0n0xidewascAned0u…     

Reactivity Ratios for Microemulsion Copolymerization of N-butyl Maleimide and Styrene

The oil-in-water microemulsion containing N-butyl maleimide(NBMI, M1) and styrene(St, M2) was prepared. The complexation properties of NBMI and St in microemulsion were investigated by means of 1H-NMR. With the participation of charge-transfer complex(CTC), four reactivity ratios and the relative reactivity of free monomers and CTC were obtained. The result was compared with that measured by Mayo-Lewis method.     

Copolymerization without initiator—6. Ethyleneimine and maleic anhydride

Copolymers of ethyleneimine with maleic anhydride were synthesized in solution (dimethylformamide and acetonitrile) in the absence of initiator. The copolymers are insoluble in organic solvents such as dimethylformamide, pyridine, dimethylsulphoxide, acetone and ethanol. The copolymer composition (found by elemental analysis) does not depend on the initial ratio of comonomers. Some of the copolymers were examined as resins with retention properties for copper (II), iron (II) and (III) and uranium (VI).     

Copolymerization of N‐tert‐Butylacrylamide with Ethylene Glycol Dimethacrylate

N‐tert‐butylacrylamide (NtBA) was copolymerized with ethylene glycol dimethacrylate (EDMA) in butanone solution over a wide composition and conversion range, using dibenzoyl peroxide (Bz₂O₂) as a free‐radical initiator. The copolymer composition was determined from the nitrogen content. Using only low conversion (≤20%) collected for the copolymerization reactions, monomer reactivity ratios were estimated using the Kelen‐Tüdos graphical method and were found to be r₁=0.26 (NtBA) and r₂=7.05 (EDMA). In order to get a better insight into the mechanism of nanoporous copolymers of NtBA with EDMA preparation by thermal degradation of copolymers of N‐acryl‐N,N′‐di‐tert‐butylurea (A‐DitBuU) with EDMA, nonporous copolymers (model compound), of the same chemical structure and composition, were prepared by performing copolymerization of NtBA with EDMA up to the high conversion of 97–100%. Thermal behavior of nanoporous and nonporous copolymers of NtBA with EDMA was studied.     

Copolymerization of ethylene α-olefin using MgCl2-ethanol adduct catalysts

The effects of the type and concentration of comonomers 1-hexene and 1-octene in the copolymerization of ethylene were investigated using pre polymerized Ziegler-Natta (catalyst a) and without pre polymerized (catalyst b) catalysts in the presence of hydrogen as a chain transfer agent. The properties of produced polymers were characterized by a set of techniques: (SEM), (EDX), (DSC), (GPC). TIBA and DEAC were used as co catalysts. The results of microscopic and SEM images showed the morphology and structure of catalysts (a) and (b) and the obtained spherical polymers. In the presence of 1-hexene, activity of catalyst (a) was at its maximum. The comonomer 1-octene at 32 mmol presented its activity (1.7 × 10³ g polymer/(g cat.h)) and after that, the activities decreased. Copolymerization of ethylene and 1-hexene by catalyst (b) showed higher activity (1.6 × 10³ g polymer/ polymer/(g cat.h)) at 40 mmol concentration of 1-hexene in comparison to catalyst (a).     

Donor-Acceptor Complexes in Copolymerization. XLIV. Copolymerization of Styrene and α-Methylstyrene with Acrylic and α-Substituted Acrylic Esters in the Presence of Aluminum Compounds

Abstract

The copolymerization of styrene (S) with methyl acrylate (MA) and with methyl methacrylate (MMA) in the presence of AlEt₃ yields equimolar, alternating copolymers while no polymer is formed in α-methylstyrene (MS)-MA and MS-MMA systems. In the presence of AlEt_1.5Cl_l,5 (EASC), S-MA and S-MMA yield alternating copolymers, S-methyl a-chloroacrylate (MCA), MS-MA and MS-MMA yield a mixture of alternating and cationic polymers, and MS-MCA yields cationic polymer only. In the presence of A1C1₃, S-MA and MS-MA yield a mixture of alternating and cationic polymers and S-MMA and MS-MMA yield cationic polymer only. The cotacticity distributions of the alternating S-MA and S-MMA copolymers prepared in the presence of AlEt₃, EASC, and A1C1, are the same; the coisotactic, co-heterotactic, and cosyndiotactic fractions being approximately in the ratio 1:2:1. The cosyndiotactic fractions of the alter-nating copolymers prepared in the presence of EASC are in the order MS-MMA > MS-MA > S-MCA > S-MMA=S-MA.     

Green Synthesis of Chemically Recyclable Polyesters via Dehydrogenative Copolymerization of Diols

Preparation of chemically recyclable polyesters by ring-opening polymerization(ROP) has made a considerable progress over the past few years. However, this method involves cumbersome synthesis and minimal functional diversity of cyclic monomers. Therefore, it is of great significance to develop novel polymerization methods for direct polymerization of commercially available monomers to prepare recyclable polyesters with versatile functionalities. In present work, we report dehydrogenative copoly...