Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Graft Copolymerization of Methyl Methacrylate onto Chitosan Initiated by Potassium Ditelluratocuprate(III)

A novel redox system, potassium ditelluratocuprate(III) (DTC)–chitosan, was employed to initiate the graft copolymerization of methyl methacrylate (MMA) onto chitosan in alkali medium. The effects of reaction variables, such as the initiator concentration, ratio of monomer to chitosan, the pH value, as well as reaction temperature and time were investigated, and the grafting conditions were optimized. Graft copolymers with both high grafting efficiency (>90%) and percentage of grafting were obtained, and the rate of polymerization is higher, which indicated that the DTC–chitosan redox system is an efficient initiator for this graft copolymerization. The structures and the thermal property of chitosan and chitosan–g–PMMA were characterized by infrared spectroscopy (IR), X‐ray diffraction and thermogravimetric analysis (TGA). A mechanism is proposed to explain the generation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of terpolyamide and chitosan. The scanning electron microscope (SEM) photographs indicated that the graft copolymer improved the compatibility of the blend.     

Graft Copolymerization of Acrylamide on Swollen poly (Ethylene Terephthalate) Fibers Using Cerium Ammonium Nitrate Initiator

Abstract

In this study the graft copolymerization of acrylamide (AAm) on swollen poly(ethylene terephthalate) (PET) fibers using cerium ammonium nitrate (CeAN) initiator was investigated. Five organic solvents, dimethylsulfoxide (DMSO), morpholine, acetic acid (HAc), n-butanol, and 1,2-dichloroethane (DCE), were used as swelling agents. DMSO was found to be the most suitable swelling agent. Solvent diffusion into the fibers was observed to increase with treatment time and temperature. The optimum graft yield was obtained when fibers were grafted after having been swollen in DMSO for a period of 1 hour at 140°C. Variation of graft yield with polymerization time and temperature, and monomer, initiator, and acid concentrations were investigated. Graft yields were observed to increase initially with polymerization time, then to level off, and were found to increase up to a certain monomer and Ce⁴⁺ concentration, then to decrease slightly. The effect of grafting on such fiber properties as diameter, viscosity, and moisture gain were also investigated.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

Effects of polymerization conditions on the in vitro hydrolytic degradation of plaques of poly(dl-lactic acid-block-ethylene glycol) diblock copolymers

In the case of poly(lactic acid) stereocopolymers, it has been shown that the hydrolytic degradation of derived devices depends very much on whether zinc lactate or tin octoate was used to polymerize lactides. In contrast, no effect was found in the case of nanoparticles derived from poly(dl-lactic acid)-block-poly(ethylene glycol) copolymers obtained by anionic polymerization of dl-lactide initiated by the sodium salt of monomethoxypoly(ethylene glycol) or by coordination-insertion polymerization of dl-lactide initiated by monomethoxypoly(ethylene glycol) in the presence of tin octoate as catalyst. To understand the difference of behaviour, in vitro hydrolytic degradation of thick plates made of the same copolymers but under different conditions was investigated. Changes were monitored by ¹H Nuclear Magnetic Resonance, Size Exclusion Chromatography, Electrospray Mass Spectrometry and Capillary Zone Electrophoresis. It is shown that chain cleavage occurred from the very beginning of degradation and that plates disintegrated after 13 weeks. In all cases, degradation proceeded faster inside than at the surface, in contrast to what was observed for nanoparticles. Tin-type copolymer plates degraded more slowly than sodium macroalcoholate-type ones and were sensitive to purification conditions, in contrast to the latter.     

基于聚乙二醇结构调控高分子量聚乳酸立构复合体系的结晶行为

设计合成了梳形聚(聚乙二醇甲醚丙烯酸酯)(PPEGA)及其与聚乙二醇(PEG)的嵌段共聚物(PEG-b-PPEGA).通过与高分子量左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)共混探究了PEG不同的结构对PLA立构复合体系(sc-PLA)结晶的影响.结果 表明线形PEGA和PEG能与sc-PLA完全相容,两者均能促进...     

Plasma-Induced Graft Polymerization of Poly(ethylene glycol) Methyl Ether Methacrylate on Si(100) Surfaces for Reduction in Protein Adsorption and Platelet Adhesion

Argon plasma-induced graft polymerization of a solution-coated macromonomer, poly(ethylene glycol) methyl ether methacrylate (PEGMA), on the Si(100) surface was carried out to impart anti-fouling properties to the Si(100) surface. The surface composition and microstructure of the PEGMA graft-polymerized Si(100) surfaces were characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM) measurements. The extent of crosslinking in the plasma-graft polymerized PEGMA (pp-PEGMA) was estimated by gel fraction determination. In general, an appropriate RF power of about 15 W and a PEGMA macromonomer concentration of about 1 wt% in the coating solution for plasma polymerization produced a high graft yield of pp-PEGMA on the Si(100) surface (the pp-PEGMA-g-Si surface). The Si(100) surface with a high concentration of the grafted pp-PEGMA was effective in preventing bovine serum albumin (BSA) adsorption and platelet adhesion.     

聚乙二醇改性聚乳酸的研究

将丙交酯（ＤＬ ＬＡ）与聚乙二醇（ＰＥＧ）共聚得到了一系列高分子量的共聚物．用ＩＲ、１Ｈ ＮＭＲ和ＤＭＡ对它的结构和粘弹性进行了表征，并测定了其力学性能，同时对材料在加工过程中特征粘度的变化也进行了研究．结果表明，ＰＥＧ与ＬＡ的共聚物是一种三嵌段结构ＨＯ ＰＬＡ ＰＥＧ ＰＬＡ ＯＨ．当ＰＥＧ含量增加时，强度下降，伸长率增加，共聚物逐渐由脆性向韧性转变，因此用ＰＥＧ改性的ＰＬＡ是一种综合性能可调控的生物降解材料     

Grafting onto Starch. IV. Graft Copolymerization of Methyl Methacrylate by Use of AIBN as Radical Initiator

Grafting of poly(methyl methacrylate) onto starch has been investigated in aqueous medium by using AIBN as radical initiator. Starch-g-PMMA has been characterized by determination of starch in the graft copolymer. Percentage of grafting has been determined as functions of concentration of monomer, concentration of initiator, reaction time, and temperature. From scanning electron microscopic studies, evidence for grafting of PMMA onto starch has been presented.     

Synthesis and degradation of nontoxic biodegradable waterborne polyurethanes elastomer with poly(ε-caprolactone) and poly(ethylene glycol) as soft segment

In this study, in order to obtain waterborne polyurethanes (WBPUs) with biocompatibility, biodegradability as well as good mechanical properties, a series of nontoxic cross-linked waterborne polyurethanes were designed and synthesized with isophorone diisocyanate (IPDI), poly(ε-caprolactone) (PCL), poly(ethylene glycol) (PEG), 1,4-butandiol (BDO) and l-lysine without any other organic agent involved in the whole synthetic process. The bulk structures and properties were characterized by DSC, IR and Instron, mainly focused on the effect of amount of PEG. Their corresponding biodegradability was examined with Lipase AK. The result showed that the prepared waterborne polyurethanes had very good tensile properties, allowing them to be well used as biomaterials. And the change of tensile properties with increasing of amount of PEG in the polymers could be assigned to the change of microphase separation, as indicated by DSC and IR data. A quite good biodegradability was achieved as judged from the change of tensile properties as a function of time. The current work demonstrated a new synthetic approach that can be more promising to prepare both nontoxic and biodegradable polyurethanes for soft tissue engineering applications or drug delivery.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Graft Copolymerization of Methyl Methacrylate on Potato Starch Using Potassium Trioxalatomanganate,K3[Mn(C2O4)3], as Initiator

Graft copolymerization of methyl methacrylate on potato starch was carried out in methanol-water medium at 35°C in the dark using potassium trioxalatomanganate, K₃[Mn(C₂O₄)₃], as initiator. The effect of different methanol-water ratios (v/v), the temperature of polymerization, the initiator concentration, the monomer concentration, the starch content, and the time of polymerization were studied. Percent total conversion, % grafting, and grafting efficiency (%) under different conditions were evaluated and compared. High grafting efficiency (～80%), high % total conversion (～85%), and high % grafting (-95%) were readily obtained. The reaction mechanism for graft copolymer formation is discussed.     

含不同侧氨基密度的PLGA-(ASP-Diol)x-PLGA共聚物的合成与表征

以N-(苄氧羰基)-L-天冬氨酸和亚硫酰氯反应制备了N-苄氧基天冬氨酸酐,将其与不同链长的二醇(乙二醇、二缩三乙二醇、聚乙二醇200和600)缩聚,合成了含端羟基的天冬氨酸-二醇交替预聚物(ASP-Di-ol)x;以其为大分子引发剂,辛酸亚锡为催化剂进行丙交酯/乙交酯(摩尔比75∶25)开环共聚,合成系列含侧氨基的天冬氨酸-二醇-聚乙丙交酯[PLGA-(ASP-Diol)x-PLGA]多元三嵌段共聚物.用FTIR,1HNMR,EA,DSC和GPC对共聚物结构进行表征.结果表明,影响预聚物分子量的主要因素不是二醇的分子量,而是其端羟基的活性.随着二醇链段长度增加,多元共聚物中氨基含量降低,玻璃化转变温度也明显下降.通过改变二醇链段的长度(或分子量)可有效地控制PLGA-(ASP-Diol)x-PLGA中侧氨基的密度及分布.     

Crystallization behavior and biodegradation of poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers

Block copolymerization by using isocyanates is an effective method for incorporating PHB and PEG because it can prepare copolymers with good properties, such as toughness, strength, and so on. In this study, we adopted soil suspension system to estimate the biodegradability of a series of PHB/PEG multiblock copolymers with different compositions and block lengths. In the degradation process, the changes in weight loss, molecular weight, and tensile strength were periodically measured to determine the biodegradability, and the surface morphology was also observed by SEM. In contrast to pure PHB, the weight loss of the copolymer was relatively lower. On the other hand, the tensile strength and molecular weight experienced apparent decrease, and for BHG1000-3-1, they reached 46.7% and 77.7% of the initial value, respectively. SEM observation showed that the surface was covered with numerous erosion pits. All these indicate that the degradation indeed took place and long-chain molecules have been hydrolyzed into shorter ones. The crystallization behavior was also investigated by DSC and WAXD. The results showed that both the segments, PEG and PHB, can form crystalline phases at lower PHB contents ranging from 29% to 44%, and when PHB component was more than 60%, only PHB phase can crystallize.     

FeBr3/Me6TREN催化MMA反向原子转移自由基聚合研究

对FeBr3/Me6TREN催化的反向原子转移自由基聚合进行了研究.在不同的催化剂、引发剂的配比、聚合温度和配体用量等条件下,该催化体系催化的MMA聚合反应动力学为一级反应,聚合物分子量可控,分子量分布很窄,说明该体系催化的聚合反应为活性可控聚合.通过实验计算了反应的活化能,并利用UV光谱对催化剂进行了研究.     

SYNTHESIS OF NOVEL BLOCK COPOLYMERS OF POLY(3-HYDROXYBUTYRIC ACID)WITH POLY(ETHYLENE GLYCOL)THROUGH ANIONIC POLYMERISATION

A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-openingpolymerization of β-butyrolactone (β-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which wereprepared by the esterification of aliphatic cyclic anhydride and poly(ethylene glycol) (PEG) oligomers (M_n=2000, 4000 and6000) and conversion of potassium dicarboxylates. The resultant copolymers as well as the intermediates were characterizedby IR,~1H-NMR and GPC.     

Synthesis of amphiphilic poly(ether-amide) dendrimer endcapped with poly(ethylene glycol) grafts and its solubilization to salicylic acid

An amphiphilic dendrimer (DPEA-PEG) grafting polyethylene glycol at the terminals was prepared by endcapping of dendritic poly(ether-amide) (DPEA) with isocyanate terminated linear polyethylene glycol (PEG-NCO). The molecular structure was verified by gel permeation chromatography (GPC), ¹H NMR and FT-IR. The micelle characteristic of DPEA-PEG in water was investigated. The critical micelle concentration (CMC) was determined by a fluorescence technique to be 55.5 mg/L. The hydrodynamic radius of micelles was measured by dynamic light scattering (DLS) to be 76.2 nm. The UV–vis spectrum showed that the solubility of salicylic acid increased from 1.91 to 2.78 mg/L when the concentration of DPEA-PEG attained 5 mg/mL in an aqueous solution.     

基于聚乳酸的可降解形状记忆高分子的研究进展

综述了基于聚乳酸的可生物降解的形状记忆高分子材料的研究情况。首先介绍了形状记忆高分子材料的记忆效应、记忆机理,然后讨论了基于聚乳酸的三种类型的形状记忆高分子材料：单组份的聚乳酸类、聚乳酸共聚物类以及聚乳酸与无机物的复合材料,分别介绍了各种类型的形状记忆高分子材料的形状记忆性能和生物降解性能。最后,讨论了聚乳酸类记忆材料的应用情况,并对其研究前景和发展趋势进行了展望。     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Compatibility and phase structure of binary blends of poly(lactic acid) and glycidyl methacrylate grafted poly(ethylene octane)

This work study is the compatibility, phase structure, and component interaction of poly(lactic acid) (PLA) and glycidyl methacrylate grafted poly(ethylene octane) (GMA-g-POE denoted as mPOE) blend by Fourier transform infrared (FTIR) spectra, dynamic mechanical analysis (DMA), scanning electron microscopy (SEM), and wide-angle X-ray diffraction (WAXD), respectively. All the binary blend compositions exhibit two distinct glass transition temperatures corresponding to the mPOE-rich and PLA-rich phases, respectively. Moreover, these two peaks approach each other with increasing mPOE content, indicating partial compatibility between the PLA and mPOE. Chemical reactions between the end carboxyl groups of the PLA and epoxy groups of the mPOE are considered as the driving force of the enhanced compatibility. They lead to an increase in viscosity of the blends and a decrease in the structural symmetry of PLA. This result brings about a decrease in the spherulite growth rate and the degree of crystallinity. Glass transition temperature (T_g) depression of mPOE is attributed to the negative pressure imposed on the dispersed rubber phase, resulting from differential contraction due to the thermal shrinkage mismatch upon cooling from the melt state. The negative pressure in the dispersed particles, in turn, would cause a dilational effect for the matrix ligament between the particles, and therefore increases the ductility and toughness of PLA.