How critical fluctuations influence adsorption properties of a van der Waals fluid onto a spherical colloidal particle

A recently proposed 3rd-order thermodynamic perturbation theory (TPT) is extended to its 5th-order version and non-uniform counterpart by supplementing with density functional theory (DFT) and a number of ansatzs for a bulk 2nd-order direct correlation function (DCF). Employment of the ansatzs DCF enables the resultant non-uniform formalism devoid of any adjustable parameter and free from numerically solving an Ornstein–Zernike integral equation theory. Density profiles calculated by the present non-uniform formalism for a hard core attractive Yukawa (HCAY) fluid near a spherical geometry are favorably compared with corresponding simulation data available in literature, and are more accurate than those based on a previous 3rd + 2nd-order perturbation DFT. The non-uniform 5th-order TPT is employed to investigate adsorption of the HCAY fluid onto a colloidal particle; it is disclosed that a depletion adsorption can be induced when the coexistence bulk fluid is situated in neighborhood of a critical point or near a bulk vapor–liquid coexistence gaseous phase or liquid phase density. A physical interpretation is given for such depletion adsorption and for its connection with parameters of the potential under consideration, which is ascribed to critical density fluctuations existing within a wide region of the bulk diagram. For a large spherical external potential inducing wetting transition, it is found that only round wetting transition is found instead of 1st-order pre-wetting transition in the case of a planar wall external potential, and the wetting transition temperature increases relative to that for the planar wall external potential. The present theoretical results for wetting transitions are supported by previous investigation based on thermodynamic considerations and a phenomenological Landau mean field theory, and are also in conformity with the present qualitative physical interpretation.     

用密度泛函理论研究Lennard-Jones 流体在狭缝中的相平衡

用改进的基础度量理论(modified fundamental measure theory, MFMT)和密度Taylor展开分别表达过剩自由能中的短程作用和色散作用. 流体分子与狭缝壁之间的相互作用以10-4-3势能函数表达. 由巨势最小原理确定Lennard-Jones (LJ)流体在狭缝中的密度分布和过剩吸附量, 所得结果与分子模拟数据吻合良好. 根据平衡时两相温度, 化学势及巨势相等, 计算了LJ流体在狭缝中的相平衡.     

Molecular simulation study of cavity-generated instabilities in the superheated Lennard-Jones liquid

Previous equilibrium-based density-functional theory (DFT) analyses of cavity formation in the pure component superheated Lennard-Jones (LJ) liquid [S. Punnathanam and D. S. Corti, J. Chem. Phys. 119, 10224 (2003); M. J. Uline and D. S. Corti, Phys. Rev. Lett. 99, 076102 (2007)] revealed that a thermodynamic limit of stability appears in which no liquidlike density profile can develop for cavity radii greater than some critical size (being a function of temperature and bulk density). The existence of these stability limits was also verified using isothermal-isobaric Monte Carlo (MC) simulations. To test the possible relevance of these limits of stability to a dynamically evolving system, one that may be important for homogeneous bubble nucleation, we perform isothermal-isobaric molecular dynamics (MD) simulations in which cavities of different sizes are placed within the superheated LJ liquid. When the impermeable boundary utilized to generate a cavity is removed, the MD simulations show that the cavity collapses and the overall density of the system remains liquidlike, i.e., the system is stable, when the initial cavity radius is below some certain value. On the other hand, when the initial radius is large enough, the cavity expands and the overall density of the system rapidly decreases toward vaporlike densities, i.e., the system is unstable. Unlike the DFT predictions, however, the transition between stability and instability is not infinitely sharp. The fraction of initial configurations that generate an instability (or a phase separation) increases from zero to unity as the initial cavity radius increases over a relatively narrow range of values, which spans the predicted stability limit obtained from equilibrium MC simulations. The simulation results presented here provide initial evidence that the equilibrium-based stability limits predicted in the previous DFT and MC simulation studies may play some role, yet to be fully determined, in the homogeneous nucleation and growth of embryos within metastable fluids.     

How to extend hard sphere density functional approximation to nonuniform nonhard sphere fluids: applicable to both subcritical and supercritical temperature regions

A methodology for the formulation of density functional approximation (DFA) for nonuniform nonhard sphere fluids is proposed by following the spirit of a partitioned density functional approximation [Zhou, Phys. Rev. E 68, 061201 (2003)] and mapping the hard core part onto an effective hard sphere whose high order part of the functional perturbation expansion is treated by existing hard sphere DFAs. The resultant density functional theory (DFT) formalism only needs a second order direct correlation function and pressure of the corresponding coexistence bulk fluid as inputs and therefore can be applicable to both supercritical and subcritical temperature cases. As an example, an adjustable parameter-free version of a recently proposed Lagrangian theorem-based DFA is imported into the present methodology; the resultant DFA is applied to Lennard-Jones fluid under the influence of external fields due to a single hard wall, two hard walls separated by a small distance, a large hard sphere, and a spherical cavity with a hard wall. By comparing theoretical predictions with previous simulation data and those recently supplied for coexistence bulk fluid situated at "dangerous" regions, it was found that the present DFA can predict subtle structure change of the density profile and therefore is the most accurate among all existing DFT approaches. A detailed discussion is given as to why so excellent DFA for nonhard sphere fluids can be drawn forth from the present methodology and how the present methodology differs from previous ones. The methodology can be universal, i.e., it can be combined with any other hard sphere DFAs to construct DFA for other nonhard sphere fluids with a repulsive core.     

Freezing line of the Lennard-Jones fluid: a phase switch Monte Carlo study

We report a phase switch Monte Carlo (PSMC) method study of the freezing line of the Lennard-Jones (LJ) fluid. Our work generalizes to soft potentials the original application of the method to hard-sphere freezing and builds on a previous PSMC study of the LJ system by Errington [J. Chem. Phys. 120, 3130 (2004)]. The latter work is extended by tracing a large section of the Lennard-Jones freezing curve, the results of which we compare with a previous Gibbs-Duhem integration study. Additionally, we provide new background material regarding the statistical-mechanical basis of the PSMC method and extensive implementation details.     

Thermodynamic pressure of simple fluids confined in cylindrical nanopores by isothermal-isobaric Monte Carlo: influence of fluid/substrate interactions

The thermodynamic pressure or grand potential density is calculated by isobaric-isothermal Monte Carlo algorithm for simple Lennard-Jones fluid confined in cylindrical pores presenting chemical heterogeneities along their axis. Heuristic arguments and simulation results show that the thermodynamic pressure of the confined fluid contains two contributions. The first term is the usual pressure of the bulk fluid for a density equal to the confined fluid density defined as the total number of confined particles divided by the accessible volume due to thermal agitation. A second term has to be added, which is empirically shown to be proportional to the fluid/wall interface area and almost constant along the adsorption and desorption branches. This interfacial contribution, calculated for various pore models, has small variations reminiscent of the fluid adsorption/desorption properties calculated in the various pores. In particular, it is shown that this interfacial quantity is maximum for a fluid/substrate interaction intensity of the same order as the fluid/fluid one, while the thermodynamic pressure at which rapid desorption occurs presents a minimum. Stronger or weaker fluid/wall affinity favors gas state nucleation on the desorption of confined fluids.     

Phase coexistence in polydisperse multi-Yukawa hard-sphere fluid: high temperature approximation

High temperature approximation (HTA) is used to describe the phase behavior of polydisperse multi-Yukawa hard-sphere fluid mixtures. It is demonstrated that in the frames of the HTA the model belongs to the class of "truncatable free energy models," i.e., the models with thermodynamical properties (Helmholtz free energy, chemical potential, and pressure) defined by the finite number of generalized moments. Using this property we were able to calculate the complete phase diagram (i.e., cloud and shadow curves as well as binodals) and size distribution functions of the coexisting phases of several different models of polydisperse fluids. In particular, we consider polydisperse one-Yukawa hard-sphere mixture with factorizable Yukawa coefficients and polydisperse Lennard-Jones (LJ) mixture with interaction energy parameter and/or size polydispersity. To validate the accuracy of the HTA we compare theoretical results with previously published results of more advanced mean spherical approximation (MSA) for the one-Yukawa model and with the Monte Carlo (MC) computer simulation results of [Wilding et al. J. Chem. Phys. 121, 6887 (2004); Phys. Rev. Lett. 95, 155701 (2005)] for the LJ model. We find that overall predictions of the HTA are in reasonable agreement with predictions of the MSA and MC, with the accuracy range from semiquantitative (for the phase diagram) to quantitative (for the size distribution functions).     

Inverse density-functional theory as an interpretive tool for measuring colloid-surface interactions in dense systems

Recent advances in optical microscopy, such as total internal reflection and confocal scanning laser techniques, now permit the direct three-dimensional tracking of large numbers of colloidal particles both near and far from interfaces. A novel application of this technology, currently being developed by one of the authors under the name of diffusing colloidal probe microscopy (DCPM), is to use colloidal particles as probes of the energetic characteristics of a surface. A major theoretical challenge in implementing DCPM is to obtain the potential energy of a single particle in the external field created by the surface, from the measured particle trajectories in a dense colloidal system. In this paper we develop an approach based on an inversion of density-functional theory (DFT), where we calculate the single-particle-surface potential from the experimentally measured equilibrium density profile in a nondilute colloidal fluid. The underlying DFT formulation is based on the recent work of Zhou and Ruckenstein [Zhou and Ruckenstein, J. Chem. Phys. 112, 8079 (2000)]. For model hard-sphere and Lennard-Jones systems, using Monte Carlo simulation to provide the "experimental" density profiles, we found that the inversion procedure reproduces the true particle-surface-potential energy to an accuracy within typical DCPM experimental limitations (approximately 0.1 kT) at low to moderate colloidal densities. The choice of DFT closures also significantly affects the accuracy.     

Fundamental measure density functional theory studies on the freezing of binary hard-sphere and Lennard-Jones mixtures

Free energies and correlation functions of liquid and solid hard-sphere (HS) mixtures are calculated using the fundamental measure density functional theory. Using the thermodynamic perturbation theory the free energies of solid and liquid Lennard-Jones (LJ) mixtures are obtained from correlation functions of HS systems within a single theoretical approach. The resulting azeotrope- and spindle-type solid-liquid phase diagrams of HS and LJ binary mixtures are in good agreement with the corresponding ones from computer simulations.     

Structure of Lennard-Jones fluids confined in square nanoscale channels from density functional theory

The density distribution of Lennard-Jones fluids confined in square nanoscale channels with Lennard-Jones walls has been studied using the nonlocal density functional theory (DFT) based on the Tarazona model. The effect of channel lengths on the density profiles with various chemical potentials was discussed. It was found that there is an apparent layering phenomenon for the confined fluids due to the combining influences of the enhancing solid-fluid interaction and the excluded volume effect. The pronounced density peaks were observed at the corners of square channels due to the strong fluid-solid interactions. The grand canonical ensemble Monte Carlo simulation (GCEMC) was applied to test the nonlocal DFT results. The DFT calculations are in relatively good agreement with the GCEMC simulations. The adsorption isotherms in a series of square channels were evaluated based on the obtained density distributions. The adsorption mechanism within the square pores was investigated. A comparison between the adsorptions of the square pores with those of the corresponding slit-size pores has been given.     

Sedimentation equilibrium of colloidal suspensions in a planar pore based on density functional theory and the hard-core attractive Yukawa model

The sedimentation equilibrium of colloidal suspensions modeled by hard-core attractive Yukawa (HCAY) fluids in a planar pore is studied. The density profile of the HCAY fluid in a gravitational field and its distribution between the pore and uniform phases are investigated by a density functional theory (DFT) approach, which results from employing a recently proposed parameter-free version of the Lagrangian theorem-based density functional approximation (Zhou, S. Phys. Lett. A 2003, 319, 279) for hard-sphere fluids to the hard-core part of the HCAY fluid, and the second-order functional perturbation expansion approximation to the tail part as was done in a recent partitioned density functional approximation (Zhou, S. Phys. Rev. E: Stat. Phys., Plasmas, Fluids, Relat. Interdiscip. Top. 2003, 68, 061201). The resultant DFT approach is, thus, the first adjustable parameter-free DFT for HCAY fluids. The validity of the present DFT for HCAY fluids of reduced range parameter z(red) = 1.8 under various external potentials is established in the first of the papers cited previously. The present DFT for HCAY fluids can predict the radial distribution function for the bulk HCAY fluid accurately in the colloidal limit (large value of z(red)), and in the hard-sphere limit, its prediction for the density profile of the hard-sphere fluid in a gravitational field is in very good agreement with the existing simulation data. The dependence of the density profile and distribution coefficient on the magnitude of the interparticle attraction, gravitational field, and degree of confinement is investigated in detail by the present DFT approach. Intuitive and qualitative analyses are also compared with the quantitative DFT calculational results.     

Density functional theory of fluids in the isothermal-isobaric ensemble

We present a density functional theory for inhomogeneous fluids at constant external pressure. The theory is formulated for a volume-dependent density, n(r,V), defined as the conjugate variable of a generalized external potential, nu(r,V), that conveys the information on the pressure. An exact expression for the isothermal-isobaric free-energy density functional is obtained in terms of the corresponding canonical ensemble functional. As an application we consider a hard-sphere system in a spherical pore with fluctuating radius. In general we obtain very good agreement with simulation. However, in some situations a peak develops in the center of the cavity and the agreement between theory and simulation becomes worse. This happens for systems where the number of particles is close to the magic numbers N=13, 55, and 147.     

Analysis of the validity of perturbation density functional theory: based on extensive simulation for simple fluid at supercritical and subcritical temperature under various external potentials

Because of the scarcity of available simulation data for confined hard-core attractive Yukawa model fluid, extensive Monte Carlo (MC) simulation research for this fluid under the influence of various external potentials were carried out. The present MC simulation results were employed to test a performance of the third-order perturbation density functional theory (DFT) based on a high order direct correlation function (DCF) [S. Zhou and E. Ruckenstein, Phys. Rev. E. 61, 2704 (2000)]. It was found that the present perturbation DFT formalism is soundly structured only if the imported second-order DCF is reliable. In this case, the accuracy of the results can be satisfactory or even very high for various types of external potentials. Further, the associated adjustable parameter can be universal, i.e., independent of the particular external field responsible for the generation of a nonuniform density profile. Dependence of both the maintenance of the reliability of the formalism and holding of the universality of the adjustable parameter on the accuracy of the imported bulk second-order DCF can be strengthened by the large difference between the external field investigated and that caused by a single hard wall used for specification of the adjustable parameter. In case the gaseous density in the subcritical region is below the coexistence density, an excellent performance of the present formalism is observed even for the mean spherical approximation's second-order DCF as an input. This advantageous property, combined with the fact that the present formalism needs only the second-order DCF of fluid at the coexistence state as an input, enables the present formalism to be a very good theoretical tool for the investigations of wetting and prewetting transitions.     

On the long-range corrections to computer simulation results for the Lennard-Jones vapor-liquid interface

The long-range corrections (LRCs) to the configurational energy have been taken into consideration in the Monte Carlo simulation of the vapor-liquid interface for a pure Lennard-Jones (LJ) fluid. The simulated bulk densities agree satisfactorily with those obtained from the Gibbs ensemble method, and the simulated surface tension values agree reasonably well with those reported in the literature for a larger number of molecules and a larger cut-off distance. To compare the influence of the potential forms on the simulation results, a truncated LJ potential, and a shifted and truncated LJ potential have been examined. Although the bulk densities and surface tensions calculated for different model fluids are strongly affected by the LRC, the different potentials essentially lead to similar density values and similar surface tension values when the respective calculated values are compared on the basis of a reduced temperature scale.     

Adsorption of carbon dioxide of 1-site and 3-site models in pillared clays: a Gibbs ensemble Monte Carlo simulation

Adsorption behavior of carbon dioxide confined in pillared clays is analyzed by using constant pressure Gibbs ensemble Monte Carlo (GEMC) method. In our simulation, 1-site and 3-site models are used to represent carbon dioxide. At the 1-site model, carbon dioxide is described as a Lennard-Jones (LJ) sphere, while at the 3-site model, carbon dioxide is modeled as a three-sites linear chain represented by EPM2 potential considering the quadrapolar effect. The potential model from Yi et al. for pillared clays is used to emphasize its quasi two-dimensional structure. Comparing the calculated results from the 1-site and the 3-site models at T=228.15 and 258.15 K, we observe that the adsorption amount from the two models is the same basically. However, the local density presents a significant difference, because the shoulder in the main peak near the wall from 3-site model can reflect the orientation of carbon dioxide. Accordingly, in the systematical investigation to explore the effect of porosity and pore width on the adsorption of carbon dioxide in pillared clays, the 3-site model was only used. We observe that for a narrow pore of H=1.02 nm, each isotherm shape displays type I curve, suggesting that it is not inflected by the porosity. However, for the larger pores of H=1.70 and H=2.38 nm, the increase of the porosity alters the shape of adsorption isotherms from a simple linear relation to the first order jump, indicating that the porosity is of very important factor to affect adsorption and phase behavior of fluids confined in pillared clays. The excess adsorptions of carbon dioxide at supercritical temperatures of T=323.15 and 348.15 K are also investigated. We find that the maximum exists for each excess isotherm, and the optimal pressure corresponding to the maximum increases with the pore width. However, the porosity has no significant effect on the optimal pressure.     

Study of structural and thermodynamic characteristics of adsorption layers by the density functional method: Local density in adsorption layer on planar solid surface and adsorption isotherms

The local density profiles in Lennard-Jones adsorption layers, as well as the excess (Gibbs) and absolute adsorption values, are calculated by the density functional method (weighting factor approximations). The substrate is described using the single-particle potential corresponding to the Lennard-Jones potential integrated over the half space occupied by the substrate. The Steele potential is used as a single-particle potential to consider methane adsorption on the surface of nonporous graphite as a specific system. The calculations are performed for both sub- and supercritical temperature regions. It is established that the density profiles are characterized by the existence of one to three maxima, which reflect the positional order of molecules in adsorption layers, i.e., the layered structure of an adsorbate.     

Chemical potential perturbation: a method to predict chemical potentials in periodic molecular simulations

A new method, called chemical potential perturbation (CPP), has been developed to predict the chemical potential as a function of density in periodic molecular simulations. The CPP method applies a spatially varying external force field to the simulation, causing the density to depend upon position in the simulation cell. Following equilibration the homogeneous (uniform or bulk) chemical potential as a function of density can be determined relative to some reference state after correcting for the effects of the inhomogeneity of the system. We compare three different methods of approximating this correction. The first method uses the van der Waals density gradient theory to approximate the inhomogeneous Helmholtz free energy density. The second method uses the local pressure tensor to approximate the homogeneous pressure. The third method uses the Triezenberg-Zwanzig definition of surface tension to approximate the inhomogeneous free energy density. If desired, the homogeneous pressure and Helmholtz free energy can also be predicted by the new method, as well as binodal and spinodal densities of a two-phase fluid region. The CPP method is tested using a Lennard-Jones (LJ) fluid at vapor, liquid, two-phase, and supercritical conditions. Satisfactory agreement is found between the CPP method and an LJ equation of state. The efficiency of the CPP method is compared to that for Widom's method under the tested conditions. In particular, the new method works well for dense fluids where Widom's method starts to fail.     

Global and critical test of the perturbation density-functional theory based on extensive simulation of Lennard-Jones fluid near an interface and in confined systems

The structure of a Lennard-Jones (LJ) fluid subjected to diverse external fields maintaining the equilibrium with the bulk LJ fluid is studied on the basis of the third-order+second-order perturbation density-functional approximation (DFA). The chosen density and potential parameters for the bulk fluid correspond to the conditions situated at "dangerous" regions of the phase diagram, i.e., near the critical temperature or close to the gas-liquid coexistence curve. The accuracy of DFA predictions is tested against the results of a grand canonical ensemble Monte Carlo simulation. It is found that the DFA theory presented in this work performs successfully for the nonuniform LJ fluid only on the condition of high accuracy of the required bulk second-order direct correlation function. The present report further indicates that the proposed perturbation DFA is efficient and suitable for both supercritical and subcritical temperatures.