Preparation of Cr‐doped TiO2/SiO2 Photocatalysts and their Photocatalytic Properties

Cr‐doped TiO₂/SiO₂ nanostructured materials were prepared employing a layer‐by‐layer assemblym technique. TiO₂ colloids were synthesized by a sol‐gel method using TiCl₄ as a precursor. The experimental results showed that sphere‐type TiO₂ particles on SiO₂ exhibited uniform shape and a narrow size distribution. The amount of Ti (wt %) increased as a function of the number of the coating layers. The coatingv layers was composed of anatase titania nanocrystals at 550 °C. The onset of band‐gap transition for Crdoped TiO₂/SiO₂ showed a red shift compared with that for the undoped TiO₂/SiO₂. And the photocatalytic activity of Cr‐doped TiO₂/SiO₂ was higher than that of undoped sample.     

Transparent hydrophobic and superhydrophobic coatings fabricated using polyamide 12–SiO2 nanocomposite

Optically transparent hydrophobic and superhydrophobic coatings have been prepared using polyamide 12–SiO₂ nanocomposite (NC) on glass substrates by the spin‐coating method. The coatings have been optimized for their hydrophobicity and transparency. The transformation from hydrophobic to superhydrophobic is achieved with increase in roughness (R_a) which increases with SiO₂ content. These coatings are highly transparent in the entire visible region (400–800 nm). The influence of layer thickness on water contact angle (WCA) and optical transmittance of the coatings has been studied. Field emission scanning electron micrograph (FESEM) shows the presence of SiO₂ nanoparticles covered with polyamide homogenously on the surface and the particles are aggregated to form a rough structure. X‐ray diffraction (XRD) patterns show that the polyamide losses its crystalline structure in the composite. The preparation procedure reported here is simple and eco‐friendly. The dual nature of the coatings, that is, high transparency and superhydrophobicity in the entire visible region suggests for its potential usage in self‐cleanings, wind screen and optoelectronic applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Corrosion behavior of electroless Ni–P/TiO2 nanocomposite coatings

Composite Ni–P/nano‐TiO₂ coatings were prepared by simultaneous electroless deposition of Ni–P and nano‐TiO₂ on a low carbon steel substrate. The deposition was carried out from stirred solutions containing suspended nano‐TiO₂ particles. The Ni–P and Ni–P/nano‐TiO₂ coatings before and after heat treatment were characterized by X‐ray diffraction, scanning electron microscopy and energy dispersive X‐ray spectroscopy. The micro‐structural morphologies of the coatings significantly varied with the nano‐TiO₂ content. The corrosion resistance of as‐plated and heat‐treated Ni–P and Ni–P/nano‐TiO₂ coatings was investigated by anodic polarization, Tafel plots and electrochemical impedance spectroscopic (EIS) studies in 3.5% NaCl solution. Ni–P/nano‐TiO₂ coating exhibited superior corrosion resistance over Ni–P coating. Copyright © 2015 John Wiley & Sons, Ltd.     

Zn–HA–TiO2 nanocomposite coatings electrodeposited on a NiTi shape memory alloy

In this work, zinc–hydroxyapatite (Zn–HA) and zinc–hydroxyapatite–titania (Zn–HA–TiO₂) nanocomposite coatings were electrodeposited onto a NiTi shape memory alloy, using a chloride zinc plating bath. The structure of the composite coatings was characterized by X‐ray diffraction, scanning electron microscopy and high‐resolution transmission electron microscopy. According to the results, the Zn–HA–TiO₂ coating exhibited a plate‐like surface morphology, where the addition of the nanoparticles caused to an increase in roughness. It was also found that due to applying a proper stirring procedure during co‐deposition, a homogenous dispersion of the nanoparticles in the coatings was achieved. Also, the addition of the TiO₂ nanoparticles to the Zn–HA–TiO₂ coating enhanced the microhardness and wear resistance. Copyright © 2014 John Wiley & Sons, Ltd.     

Improved Photodegradation of Organic Contaminants Using Nano‐TiO2 and TiO2–SiO2 Deposited on Portland Cement Concrete Blocks

The photocatalytic activity of TiO₂ nanoparticles (nano‐TiO₂) and its hybrid with SiO₂ (nano‐TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was studied in this work. Nanohybrid photocatalysts were prepared using an inorganic sol–gel precursor and then characterized using XRD, SEM and UV–Vis. The grain sizes were estimated by Scherrer's equation to be around 10 nm. Then, a thin layer was applied to Portland cement concrete (PCC) blocks by dipping them into nano‐TiO₂ and nano‐TiO₂–SiO₂ solution. The efficiency of coated PCC blocks for the photocatalytic decomposition of two dyes, Malachite Green oxalate (MG) and Methylene Blue (MB), was examined under UV and visible irradiation and then monitored by the chemical oxygen demand tests. The results showed that more than 80% and 92% of MG and MB were decomposed under UV–Vis irradiation using blocks coated with nano‐TiO₂–SiO₂. TiO₂/PCC and TiO₂–SiO₂/PCC blocks showed a significant ability to oxidize dyes under visible and UV lights and TiO₂–SiO₂/PCC blocks require less time for dye degradation. Based on these results, coated blocks have increased photocatalytic activity which can make them commercially accessible photocatalysts.     

Synthesis of polyethylene‐octene elastomer/SiO2‐TiO2 nanocomposites via in situ polymerization: Properties and characterization of the hybrid

In this study, a silicic acid and tetra isopropyl ortho titanate ceramic precursor and a metallocene polyethylene‐octene elastomer (POE) or acrylic acid grafted metallocene polyethylene‐octene elastomer (POE‐g‐AA) were used in the preparation of hybrids (POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂) using an in situ sol‐gel process, with a view to identifying a hybrid with improved thermal and mechanical properties. Hybrids were characterized using Fourier transform infrared spectroscopy, ²⁹Si solid‐state nuclear magnetic resonance (NMR), X‐ray diffraction, differential scanning calorimetry, thermogravimetry analysis, dynamic mechanical thermal analysis, and Instron mechanical testing. Properties of the POE‐g‐AA/SiO₂? TiO₂ hybrid were superior to those of the POE/SiO₂? TiO₂ hybrid. This was because the carboxylic acid groups of acrylic acid acted as coordination sites for the silica‐titania phase to allow the formation of stronger chemical bonds. ²⁹Si solid‐state NMR showed that Si atoms coordinated around SiO₄ units were predominantly Q₃ and Q₄. The 10 wt % SiO₂? TiO₂ hybrids gave the maximum values of tensile strength and glass transition temperature in both POE/SiO₂? TiO₂ and POE‐g‐AA/SiO₂? TiO₂. It is proposed that above this wt %, excess SiO₂? TiO₂ particles caused separation between the organic and inorganic phases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1690–1701, 2005     

Synthesis of TiO2–SiO2 aerogel via ambient pressure drying: effects of sol pre-modification on the microstructure and pore characteristics

TiO₂–SiO₂ composite aerogels were prepared via ambient pressure drying by sol–gel and surface modification for both the sol and gel samples. The organosilane reagents of decamethyltetrasiloxane (DMTSO)/trimethylchlorosilane (TMCS) and hexamethyldisiloxane (HMDSO)/TMCS were introduced into the TiO₂–SiO₂ composite sol for pre-modification respectively, and subsequently the TMCS/hexane solution was used for surface modification of the obtained TiO₂–SiO₂ composite gel. The effects of sol pre-modification on the microstructure and pore characteristics of TiO₂–SiO₂ composite aerogels were investigated. The results indicate that HMDSO/TMCS coupling reagents is more appropriate for the pre-modification of TiO₂–SiO₂ composite sol than the DMTSO/TMCS reagents. The best volume ratio of HMDSO/TMCS/composite sol for preparing mesoporous TiO₂–SiO₂ composite aerogels is in the range of 1:0.33:10–1:1.0:10, with which the specific surface area and pore volume of the obtained TiO₂–SiO₂ composite aerogels are 492–645 m²/g and 2.63–2.85 m³/g, respectively. The results of adsorption and photocatalytic degradation of rhodamine B show that the as-prepared TiO₂–SiO₂ composite aerogels have higher adsorption/photocatalysis. Particularly, the as-prepared TiO₂–SiO₂ composite aerogels with HMDSO/TMCS showed prominent adsorption capability with the adsorption rate attaining to 89.4 % within 60 min.     

Preparation and Photocatalytic Activity of TiO2 Films on Silica Glass Substrates by Assembly Technique

Nanostructured TiO₂ coating films on silica glass substrates were prepared by the assembly technique. TiO₂ colloids were synthesized employing the sol‐gel method using TiCl₄ as a precursor. The effect on the surface structures which was caused by the polyethylene glycol (PEG) added to the precursor solution and the photocatalytic activity were studied. The experimental results showed that the cobble‐like TiO₂ coating films were synthesized at 500 °C. On the surface of the samples, TiO₂ films exhibited uniform shape and a narrow size distribution. The result of proper PEG added to the precursor solution led to the decreasing of the size of TiO₂ particles and the increasing of the surface area of the samples. The photocatalytic activity of TiO₂ films with PEG was higher than that of samples without PEG.     

Preparation of composited Nano‐TiO2 and its application on antimicrobial and self‐cleaning coatings

Composite nano‐TiO₂ with doping Fe³⁺ and Ag was prepared, and further modified by 3‐methacryloxypropyltrimethoxysilane. They were characterized by Zetasizer Nano ZS Particle and Zeta Potential Analyzer, X‐ray diffraction, UV–Vis spectrophotometer, FT–IR spectra, and transmission electron microscopy. The modified composite nano‐TiO₂ was applied to prepare multifunctional fluorocarbon coatings (FCC). Antibacterial activity of multifunctional FCC containing modified composite nano‐TiO₂ was investigated. Its photocatalytic antibacterial activity reached 92%. The influence of doping ingredients, amount of composite nano‐TiO₂, different light houses, or surface modification was discussed. The surface of FCC cannot be easily smirched by oiliness, dust or water because of hydrophobic fluorosilicone emulsion. It would be an available modern interior building coating for its remarkable photocatalytic antibacterial property as well as self‐cleaning function. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of TiO2–Ti and TiO2–TiN composite coatings on corrosion behavior of NiTi alloy

Two kinds of biocompatible coatings were produced in order to improve the corrosion resistance of nickel titanium (NiTi) alloy. A titanium oxide–titanium (TiO₂–Ti) composite was coated on NiTi alloy using electrophoretic method. After the coating process, the samples were heat‐treated at 1000 °C in two tube furnaces, the first one in argon atmosphere and the second one in nitrogen atmosphere at 1000 °C. The morphology and phase analysis of coatings were investigated using scanning electron microscopy and X‐ray diffraction analysis, respectively. The electrochemical behavior of the NiTi and coated samples was examined using polarization and electrochemical impedance spectroscopy tests. Electrochemical tests in simulated body fluid demonstrated a considerable increase in corrosion resistance of composite‐coated NiTi specimens compared to the non‐coated one. The heat‐treated composite coating sample in nitrogen atmosphere had a higher level of corrosion resistance compared to the heat‐treated sample in argon atmosphere, which is mainly due to having nitride phases. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhancement of Antibacterial Capability of Cotton Textiles Coated with TiO2–SiO2/Chitosan Using Hydrophobization

Since textiles have a porous and hydrophilic structure, they are ideal substrates for the settlement and growth of pathogenic bacteria. Therefore, fabrication of hydrophobic textiles to reduce their humidity has the potential to inhibit the growth of bacteria. On this basis, we report here an improvement of the antibacterial capability of textiles coated with TiO₂–SiO₂/chitosan using hydrophobization. Synthesis of TiO₂–SiO₂ clusters with chitosan was carried out using the sol–gel technique. In addition, hydrophobization of the textiles using hexadecyltrimethoxysilane (HDTMS) was carried out using a dip‐spin coating method. In addition, their characteristics were examined using X‐ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis diffuse reflectance spectra (UV‐DRS), Fourier transform infrared (FTIR), water contact angle, and antibacterial activity. XRD, SEM, UV‐DRS, FTIR, and water contact angle confirmed the physical and chemical properties of the modified textiles. In summary, the present work shows that the hydrophobization of textiles using HDTMS can enhance the antibacterial capability of cotton textiles.     

Synthesis of polytitanosiloxanes and their transformation to SiO2–TiO2 ceramic fibers

A one-pot synthesis of polytitanosiloxanes (PTS) and its transformation to SiO₂–TiO₂ ceramic fibers were investigated. PTS was prepared by the hydrolysis of tetraethoxysilane followed by the reaction with bis(2,4-pentanedionato)titanium diisopropoxide in methanol in 33–95 SiO₂ mol %. PTS was considered to be a ladder- or sheet-type polymer consisting of Si? O? Si and Si? O? Ti linkages as a main chain with pendant hydroxyl and 2,4-pentanedionato groups. SiO–TiO ceramic fibers were prepared by the pyrolysis of SiO₂–TiO₂ precursor fibers, which were prepared by the dry spinning of PTS followed by steam treatment. The tensile strength was 610 MPa for the SiO₂–TiO₂ fibers (SiO₂/TiO₂ = 20) after the pyrolysis at 700₀C. © 1994 John Wiley & Sons, Inc.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Effect of formulation of silica‐based solution on corrosion resistance of silicate coating on hot‐dip galvanized steel

Several silica‐based solutions with 50 g/l of SiO₂ were prepared from sodium silicate solutions and silica sol; the silicate conversion coatings were obtained by immersing hot‐dip galvanized steel sheets in these solutions. These solutions were characterized using high‐resolution transmission electron microscopy and ²⁹Si nuclear magnetic resonance; the morphology of the coatings was observed by SEM and atomic force microscopy while the corrosion resistance was evaluated by electrochemical measurements as well as neutral salt spray tests. The results show that the coatings obtained from the single silica sol solution had poor adhesion and the coating obtained from the sodium silicate solution with low SiO₂/Na₂O molar ratio was uneven. By adding the silica sol to the silicate solution with low molar ratio, uniform coatings with better protection property were obtained. According to the results of ²⁹Si nuclear magnetic resonance spectra, the effects of the distribution of silicate anions with various polymerization degrees in the silica‐based solutions on the microstructure and corrosion resistance of the silicate coatings are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

TiO2 nanoparticles synthesized in an aprotic solvent and applied to prepare high-refractive-index TiO2-polyimide hybrid thin films

In this study, very small (2–5 nm) TiO₂ nanoparticles were synthesized in an aprotic solvent, N,N-dimethylacetamide, via hydrolysis and condensation of titanium alkoxide at room temperature. The synthesized TiO₂ sol showed 30 days of storage stability and could be used to prepare high-refractive-index TiO₂-polyimide hybrid thin films by an ex-situ method that involved a spin coating and multistep baking process. The field emission scanning electron microscope image showed a flat and uniform morphology of the hybrid thin film. TiO₂ domains were in the nanometer range, thus avoiding light scattering. The refractive index at 633 nm of the hybrid thin film reached 2.05, which suggested potential applications of the film to anti-reflective coatings and optical waveguides.     

Surface properties,adherence, and photocatalytic activity of sol–gel dip-coated TiO2–ZnO films on glass plates

In this study, TiO₂–ZnO nanostructured films prepared from different Ti/water mole ratios were deposited on glass plates by a sol–gel dip-coating method. The structural and surface properties, adherence, and photoactivity of synthesized TiO₂–ZnO coatings in methylene blue degradation were investigated. Among the as-prepared TiO₂–ZnO coatings from sols with different Ti/water mole ratios (1, 0.66, 0.5, and 0.4), the highest sol concentration (Ti/water mole ratio of 1) showed the highest methylene blue photodegradation of almost 80% after 400 min of UV irradiation. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Energy-dispersive X-ray (EDX), and UV-vis diffuse reflectance spectra (DRS) confirmed that at high sol concentrations (Ti/water mole ratios of 1 and 0.66), a mixed phase of anatase and rutile is formed, whereas at a Ti/water mole ratio of 0.5, just pure rutile is formed. In detail, decreasing the sol concentration increases the cracks, degree of agglomeration, and the thickness of coatings. UV-vis DRS studies also confirm that decreasing the sol concentration in synthesized TiO₂–ZnO films leads to a shift in the absorption region of the coating to the UV region. Moreover, decreasing the sol concentration declines the coating adherence onto glass plates. TEM images of the TiO₂–ZnO coating synthesized from sol with a Ti/water mole ratio of 1 revealed the formation of ZnO nanorods around a spherical TiO₂, which indicates the presence of strong interaction between TiO₂ and ZnO nanoparticles. The TiO₂–ZnO coating synthesized from sol with a Ti/water mole ratio of 1 was then evaluated at different methylene blue concentrations, pH values, and number of coatings. After five consecutive runs, no significant decrease in the photodegradation efficiency was observed. Scanning electron microscopy (SEM) picture of used coating showed a smooth and stable layer without any detachment. Thermogravimetric analysis (TG) and sonication test confirmed thermal and mechanical stabilities of this coating as well.     

Silver‐Doped TiO2‐Coated Cotton Fabric as an Effective Photocatalytic System for Dye Decolorization in UV and Visible Light

In this study, titanium tetra‐isopropoxide was used as a precursor of TiO₂ for in situ coating on cotton fabric by sol–gel method. Subsequently, silver nitrate was used as doping agent to prepare silver‐doped TiO₂‐coated cotton fabric during hydrothermal treatment. The treated samples were characterized through field‐emission scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma‐mass spectroscopy and UV–visible absorption spectroscopy to study morphology, composition of deposited elements and light absorption behavior of treated samples. X‐ray photoelectron spectroscopy was carried out to analyze the electronic state of silver in TiO₂‐coated fabric after hydrothermal treatment. Doping of silver on TiO₂‐coated fabric and subsequent hydrothermal treatment was found to enhance dye decolorization rate of rhodamine B dye solution in both UV and visible light radiations with respect to undoped TiO₂. The study shows that an optimal level of silver‐doped TiO₂‐coated fabric can be used repeatedly for dye decolorization without significant loss in its photocatalytic activity. The self‐cleaning properties of samples were also studied using methylene blue as a staining agent. It was observed that the presence of 1.8% silver on the weight of titanium in doped samples provides almost 82% of stain degradation.     

Sol–gel derived durable antireflective coating for solar glass

In this paper, we present the design and preparation of a type of high-strength SiO₂/TiO₂ AR coatings used in solar glass by dip coating method. The average transmittance of glass coated in this way is increased by more than 6% in the wavelength from 400 to 800 nm, which fits well with the theoretical expectation. The mechanical performance and atmospheric exposure tests prove that the coatings have scratch resistance, erosion resistance and long-time stability. The AFM morphology shows that the surface of the coating is very smooth with the experimental result of RMS roughness 0.306 nm. These phenomena indicate that the SiO₂/TiO₂ AR coatings have high potential commercialization for low-cost solar glass.     

Synthesis of Poly(2‐Hydroxyethyl Methacrylate)‐based Hybrid Nanoparticles via Visible‐Light‐Initiated Radical Polymerization

We report a new, unique process for the design of poly(2‐hydroxyethyl methacrylate) (PHEMA )‐based hybrid materials, which involves the coating of PHEMA on TiO₂ and TiO₂ /Ag nanoparticle surface under visible light. New hybrid materials initiated under different conditions were prepared under visible light, which could be used for the theoretical design of nanohybrid materials. The hybrid materials thus prepared were characterized by Fourier transform infrared spectroscopy (FTIR ), transmission electron microscopy (TEM ), and thermogravimetric analysis (TGA ). The experimental results confirmed the successful synthesis of TiO₂–PHEMA hybrid materials. Compared to other methods, the method reported here involving the direct combination of PHEMA on the TiO₂ surface was simply catalyzed by visible light without the addition of initiators.     

Synthesis of Nano‐Sized TiO2 Colloidal Sol and Its Optical Properties

Nano‐sized TiO₂ sol was prepared through a wet synthesis process. The synthesis procedure involved hydrolysis of TiCl₄, acid treatment, and a SiO₂ surface‐modifying process. Before surface modification, the TiO₂ suspension was treated with acid to remove Na ions, soluble TiO_2, and other impurities. The acid treatment of a TiO₂ suspension at a higher temperature was proved to be useful for effective SiO₂ modification. The colloidal sol provided high transparency in visible light as well as excellent UV‐shielding properties. Surface modification of TiO₂ particles with SiO₂ greatly improved both the dispersing stability in neutral pH and the photostability of TiO₂ colloidal sol.