The electronic structure of molecules by a many-body approach: V. Ionization potentials and one-electron properties of cyclopentadiene and 1-sila-cyclopentadiene-(2,4)

The valence ionization potentials (IP's) of cyclopentadiene and 1-sila-cyclopentadiene-(2,4) are studied by an ab initio many-body approach which includes the effect of electron correlation and reorganization beyond the Hartree-Fock approximation. The Hartree-Fock approximation gives the correct ordering of the IP's for cyclopentadiene but this ordering does not agree with the results of the previous experimental and theoretical studies. The ordering is 1a₂(π), 2b₁(π), 4b₂, 6a₁, 5a₁, 3b₂, 1b₁ (π), 4a₁, 2b₂, 3a₁. For sila-cyclopentadiene the ordering of the IP's is: 1a₂(π), 4b₂, 2b₁(π), 6a₁, 1b₁(π), 5a₁, 3b₂, 4a₁, 3a₁, 2b₂. The Hartree-Fock approximation is found to be incorrect with respect to the ordering of the 4b₂ and 2b₁(π) IP's. A number of one-electron properties are calculated in the one-particle approximation and compared with the available experimental data.     

Synergic effect of palladium-based bimetallic catalysts for the hydrogenation of nitroaromatics

Bimetallic catalysts, PdCl₂-MX_n and PdCl₂(PhCN)₂-Mx_n (MX_n=FeCl₃, Fe(acac)₃, Co(OAc)₂, CoCl₂, Co(acac)₂, NiCl₂, Ni(OAc)₂, RuCl₃, Cu(OAc)₂, CuCl₂), exhibit remarkable synergic effect which can obviously increase the activity of the monometallic Pd catalyst for the hydrogenation of nitroaromatics, whereas MX_n alone is not catalytically active under the same reaction conditions.     

Single-determinantal open- and closed-shell FSGO calculations for some diatomic molecules

Open-shell single-determinantal calculations are reported here for the molecular species H₂, Li₂⁺, N₂, O₂ (triplet), O₂^2?;, O₂^?, O₂²⁺, O₂⁺, and F₂; corresponding closed-shell calculations are reported for the species H₂, N₂, O₂ (singlet), O₂^2?, O₂²⁺, and F₂. The floating spherical Gaussian orbital (FSGO ) method was employed. The calculated trend in bond lengths of isonucleic diatomic molecules is in agreement with experiment. For heteronucleic diatomic molecules, however, the experimental trend in bond lengths is not obtained; in this connection, the effect of lone pairs on bond length is discussed. The dissociation energies of H₂ and Li₂⁺ are evaluated. The energy gap between the triplet and singlet states of the oxygen molecule is calculated to be 8.96 eV compared to the experimental value of 4.54 eV.     

Approaching the Hartree-Fock limit for organotransition metal complexes

In theoretical studies of the electronic structure of organometallic complexes, the choice of basis set is critical, much more so than for analogous studies of molecules containing only H, C, N, and O. This problem is discussed in the light of structural predictions for the transition metal hydrides MH, MH₂, and MH₄, for the fluorides MF₂ and MF₃, and for Ni(CO)₄, Ni(C₂H₄)₃, (CO)₃NiCH₂, and Ni(C₄H₄)₂.     

Inorganic interferences in the 2,4-xylenol spectro-photometric method for nitrate and their elimination

A study of inorganic interferences with the 2,4-xylenol spectrophotometric method for nitrate and their elimination is reported. Fifty-three substances do not interfere with the original method. Nitrite interferes somewhat by producing a faint yellow color. Certain reducing agents (Fe²⁺, S^2-, S₂O₃^2-, and SCN^-) cause low results by reducing the nitrate in the strong sulfuric acid solution, while some oxidizing agents (Mn⁷⁺, Cr⁶⁺, V⁵⁺, and ClO₃^-) cause low results by inactivating or destroying the 2,4-xylenol. Persulfate and small amounts of H₂O₂ produce a slight deepening of the color; larger amounts of H₂O₂; cause low results, as do Cl^-, Br^-, I^-, and metals. The recommended maximum permissible limits (mg per 10-ml aliquot) for the original method are NO₂^--N, Fe²⁺, S^2-, SCN^-, V⁵⁺, ClO₃^-, Cl^-, I^-, 0.2; Mn⁷⁺, Cr⁶⁺, S₂O₈^2-, 5; H₂O₂, 0.02; S₂O₃^2-, Br^-, 0.1; metals, none. Procedures for the elimination of most of the interferences are described. Nitrite is destroyed with sulfamic acid. The interferences of reductants (Fe²⁺, S^2-, S₂O₃^2-, and SCN^-) and oxidants (Mn⁷⁺ and Cr⁶⁺) are eliminated with hydrogen peroxide, the excess of which (and S₂O₈^2-) is destroyed by boiling in the presence of Fe³⁺. The interference of Cl^-, Br^-, and I^- is eliminated by precipitation with silver sulfate. An alternative to the sulfamic acid procedure is to oxidize nitrite to nitrate with peroxide and deduct NO₂^--N from the total NO₃^--N. After elimination of interferences, a 10-ml aliquot of sample solution is treated with 17.0 ml of sulfuric acid and 2,4-xylenol, the 6-nitro-2,4-xylenol is steam-distilled into an ammonia—water—isopropanol mixture, and the yellow color is measured.     

The Oxidation of Heterogeneous Tl/Ni/P‐Alloys — Preparation and Crystal Structures of the Thallium Nickel Phosphates TlNi4(PO4)3, Tl4Ni7(PO4)6, and Tl2Ni4(P2O7)(PO4)2

Single crystals of the first anhydrous thallium nickel phosphates were prepared by reaction of heterogeneous Tl/Ni/P alloys with oxygen. TlNi₄(PO₄)₃ (pale‐yellow, orthorhombic, space group Cmc2₁, a = 6.441(2)Å, b = 16.410(4)Å, c = 9.624(2)Å, Z = 4) crystallizes with a structure closely related to that of NaNi₄(PO₄)₃. Tl₄Ni₇(PO₄)₆ (yellow‐brown, monoclinic, space group Cm, a = 10.711(1)Å, b = 14.275(2)Å, c = 6.688(2)Å, β = 103.50(2)°, Z = 8) is isotypic with Na₄Ni₇(PO₄)₆, and Tl₂Ni₄(P₂O₇)(PO₄)₂ (brown, monoclinic, space group C2/c, a = 10.389(2)Å, b = 13.888(16)Å, c = 18.198(3)Å, β = 103.1(2)°, Z = 8) adopts the K₂Ni₄(P₂O₇)(PO₄)₂ structure. Tl₂Ni₄(P₂O₇)(PO₄)₂ could also be prepared in nearly single phase form by reaction of Tl₂CO₃, NiO, and (NH₄)₂HPO₄.     

Bis(triphenylphosphine)platinum acetylides from functionally substituted acetylenes. A new synthesis method

A general procedure, giving high yields for the synthesis of (Ph₃P)₂Pt(CCR)₂ complexes (R = C₆H₅, C(CH₂)CH₃, (CH₂)₆CCH, CH₂OH, CH(OH)CH₃, CH(OH)C₆H₅, CH₂CH(OH)CH₃, C(OH)(CH₃)CH₃, C₆H₁₀OH, C(OH)(CH₃)CH₂CH₃, CH₂NHCH₃, CH₂NHCH₂C₆H₅, CH₂N(CH₃)₂, CH₂N(C₂H₅)₂) is reported. On the basis of the low frequency IR spectra a trans structure is proposed for all complexes. UV spectra are also reported.     

Treatment of hydrogen bonding in SINDO1

For the treatment of hydrogen bonding in SINDO1, 2p orbitals are introduced on hydrogen. The optimization of the orbital exponent together with the generation of approximate formulas for the core attraction integrals is sufficient to obtain good geometries and binding energies in hydrogen bonded systems. The method is applied to the dimers (H₂O)₂, (NH₃)₂, (HF)₂, (HCOOH)₂, (HCN)₂, (H₂S)₂, and (HCI)₂, mixed dimers NH₃ · H₂O and H₂O · HCN, and cyclic polymers (HF)_n(n = 3, 4, 6). © 1993 John Wiley & Sons, Inc.     

Catalytic decomposition of hydrogen peroxide by Cu/M heterobimetallic complexes (M = Mn, Zn) with Schiff bases in the presence of electrolytes

A study was carried out on the effect of electrolytes KCl, CaCl₂, MnCl₂, ZnCl₂, CuCl₂, KNO₃, Ca(NO₃)₂, Mn(NO₃)₂, Zn(NO₃)₂, and Cu(NO₃)₂ on the kinetics of the decomposition of H₂O₂ catalyzed by [Cu(L¹/L²)][MCl₄] complexes (M = Zn, Mn; L¹ is 4,6,6-trimethyl-1,9-diamino-3,7-diaza-3-nonene, L² is 1,15-dihydroxy-7,9,9-trimethyl-3,6,10,13-tetraaza-6-pentadecene). The chloride ions were found to reversibly inhibit the catalyst. The major kinetic characteristics of this reaction were obtained using a mathematical model taking account of the reversible and irreversible inhibition of the catalyst. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 44, No. 4, pp. 240–247, July–August, 2008.     

Bonding information from fluorine NMR for alkoxy tungsten pentafluorides

The ¹⁹F chemical shifts have been measured for the fluorines bound to tungsten in the compounds ROWF₅ where R is CH₃, ClCH₂CH₂, Cl₂CHCH₂, Br₃CCH₂, Cl₃CCH₂, F₃CCH₂, F₂CH(CF₂)₃CH₂, F₃CCF₂CH₂, and (CF₃)₂CH. For the series as written, both the axial and equatorial fluorines resonate at progressively lower field, and the change in resonant position from one compound to another is twice as great for the axial as for the equatorial fluorines. These results are interpreted in terms of σ- and π-bonding contributions.     

Asymmetric Synthesis XIV: TiCl(Oipr)3-Promoted Asymmetric Coupling Reaction of D-Camphor Ketimine Anion

Optically active 1, 2-Diphenylethylendiamine(9) is obtained by asymmetric oxidative coupling reaction of d-camphor ketimine anion (4). Among various oxidating agents, TiCl(Oipr)₃ is better than l₂, Br₂, CuCl₂, FeCl₃ and BrCH₂CH₂Br.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Breaking the Mirror: pH‐Controlled Chirality Generation from a meso Ligand to a Racemic Ligand

To study the conversion from a meso form to a racemic form of tetrahydrofurantetracarboxylic acid (H₄L), seven novel coordination polymers were synthesized by the hydrothermal reaction of Zn(NO₃)₂ ? 6 H₂O with (2S,3S,4R,5R)‐H₄L in the presence of 1,10‐phenanthroline (phen), 2,2′‐bipyridine (2,2′‐bpy), or 4,4′‐bipyridine (4,4′‐bpy): [Zn₂{(2S,3S,4R,5R)‐L}(phen)₂(H₂O)] ? 2 H₂O ( 1 ), [Zn₄{(2S,3R,4R,5R)‐L}{(2S,3S,4S,5R)‐L}(phen)₂(H₂O)₂] ( 2 ), [Zn₂{(2S,3S,4R,5R)‐L}(H₂O)₂] ? H₂O ( 3 ), [Zn₄{(2S,3R,4R,5R)‐L}{(2S,3S,4S,5R)‐L} (2,2′‐bpy)₂(H₂O)₂] ? 2 H₂O ( 4 ), [Zn₂ {(2S,3S,4R,5R)‐L}(2,2′‐bpy)(H₂O)] ( 5 ), [Zn₄{(2S,3R,4R,5R)‐L}{(2S,3S,4S,5R)‐L} (4,4′‐bpy)₂(H₂O)₂] ( 6 ), and [Zn₂ {(2S,3S,4R,5R)‐L}(4,4′‐bpy)(H₂O)] ? 2 H₂O ( 7 ). These complexes were obtained by control of the pH values of reaction mixtures, with an initial of pH 2.0 for 1 , 2.5 for 2 , 4 , and 6 , and 4.5 for 3 , 5 , and 7 , respectively. The expected configuration conversion has been successfully realized during the formation of 2 , 4 , and 6 , and the enantiomers of L, (2S,3R,4R,5R)‐L and (2S,3S,4S,5R)‐L, are trapped in them, whereas L ligands in the other four complexes retain the original meso form, which indicates that such a conversion is possibly pH controlled. Acid‐catalyzed enol–keto tautomerism has been introduced to explain the mechanism of this conversion. Complex 1 features a simple 1D metal–L chain that is extended into a 3D supramolecular structure by π–π packing interactions between phen ligands and hydrogen bonds. Complex 2 has 2D racemic layers that consist of centrosymmetric bimetallic units, and a final 3D supramolecular framework is formed by the interlinking of these layers through π–π packing interactions of phen. Complex 3 is a 3D metal–organic framework (MOF) involving meso‐L ligands, which can be regarded as (4,6)‐connected nets with vertex symbol (4⁵.6)(4⁷.6⁸). Complexes 4 and 5 contain 2D racemic layers and (6,3)‐honeycomb layers, respectively, both of which are combined into 3D supramolecular structures through π–π packing interactions of 2,2′‐bpy. The structure of complex 6 is a 2D network formed by 4,4′‐bpy bridging 1D tubes, which consist of metal atoms and enantiomers of L. These layers are connected through hydrogen bonds to give the final 3D porous supramolecular framework of 6 . Complex 7 is a 3D MOF with novel (3,4,5)‐connected (6³)(4².6⁴)(4².6⁶.8²) topology. The thermal stability of these compounds was also investigated.     

Potentiometric and spectrophotometric titration of Cu2+ complexes with N-isopropyl-2-methyl-1,2-propanediamine

The complexation of Cu²⁺ by N-isopropyl-2-methyl-1,2-propanediamine (L) has been studied by potentiometric and spectrophotometric titration. The dominant complexes formed in this system are [CuL]²⁺, [CuL₂]²⁺, [Cu₂L₂(OH)₂]²⁺, and [CuL(OH)₂]. The data were thoroughly tested for different models with [CuL(OH)]⁺, [CuL(OH)]⁺, [Cu(OH)]⁺, and [Cu₂(OH)₂]²⁺ as additional species. The importance of steric factors is indicated by the d-d* spectra: for [CuL₂]²⁺, (λ_max = 499 nm) the absorption maximum is shifted by 50 nm to high energies relative to [Cu(en)₂]²⁺, (λ_max = 549 nm), whereas the opposite is true for the 1:1 complexes ([CuL]²⁺ : λ_max = 712 nm,s [Cu(en)]²⁺ : λ_max = 660 nm).     

Die Kristallstruktur von Cs2PrO3, sowie über Cs2CeO3, Cs2TbO3, Rb2CeO3 und Rb2TbO3

Crystal Structure of Cs₂PrO₃ and also about Cs₂CeO₃, Cs₂TbO₃, Rb₂CeO₃, and Rb₂TbO₃ New prepared Cs₂PrO₃ (dark brown) is orthorhombic due to single crystal data, K₂PbO₃ type of structure (Cmc2₁) with a = 11.4₇, b = 7.72₂, c = 6.42₇ Å and Z = (4). Cs₂CeO₃ (colourless, a = 11.49₅, b = 7.75₃, c = 6.43₇ Å), Cs₂TbO₃ (red-brown, a = 11.3₇, b = 7.72₆, c = 6.14₂ Å), and the low-temperature form of (LT-) Rb₂TbO₃ (red-brown, a = 10.9₁, b = 7.39₀, c = 6.09₉ Å) are isotypic. Hitherto unknown HT-Rb₂CeO₃ (high-temperature form, colourless, a = 3.83₇, c = 18.4₇ Å, Z = 2, hexagonal) and “HT-Rb₂TbO₃” (red-brown, a = 3.77₃, c = 18.0₀ Å) correspond according to powder-data to the α-NaFeO₂ type of structure. Cs₂PrO₃ has been measured magnetically (100–300 K). The Madelung Part of Lattice Energy (MAPLE) is calculated and discussed.     

Thermodynamic properties and solution equilibria of aqueous bivalent transition metal nitrates and magnesium nitrate

Osmotic coefficients for Mn(NO₃)₂, Co(NO₃)₂, Ni(NO₃)₂, Cu(NO₃)₂, Zn(NO₃)₂, and Mg(NO₃)₂ in aqueous solution have been determined by the isopiestic method at 25°C, and activity coefficients have been derived. The results agree with the literature data for Zn(NO₃)₂, while they are significantly different for Co(NO₃)₂, Cu(NO₃)₂, and Mg(NO₃)₂, and those for Mn(NO₃)₂ and Ni(NO₃)₂ are new. The concentration dependence of the osmotic coefficients for the bivalent metal nitrates is similar to that for the trifluoroacetates, while it differs from those for the other salts of the same series of metals. The results are discussed in terms of the inner-sphere and outer-sphere association of ions, auxiliary information being derived from the concentration effects in the visible spectra of the coloured metal nitrates.     

Preparation of inorganic nanoparticles in oil-in-water microemulsions: A soft and versatile approach

In this review, the synthesis of inorganic nanoparticles using oil-in-water (O/W) microemulsions as confined reaction media is discussed. Synthesis using (O/W) microemulsions has been demonstrated for a great variety of inorganic nanoparticles: metallic (Pt, Pd, Rh, Ag), single metal oxides (CeO₂, ZrO₂, TiO₂, Fe₂O₃), mixed and doped metal oxides (Ce_0.5Zr_0.5O₂, Ce_0.99Eu_0.01O₂, Zr_0.99Eu_0.01O₂, and Fe₂Mn_0.5Zn_0.5O₄), semiconductors (PbS, CdS, Ag₂S, ZnS, CdSe, PbSe, Ag₂Se), fluorides (CaF₂, YF₃, NdF₃, PrF₃), phosphates (CePO₄, HoPO₄), and chromates (BaCrO₄ and PbCrO₄). There are two synthetic strategies: 1) the use of oil-in water (O/W) microemulsions, in which the precursor is an ionic salt which is dissolved in the continuous aqueous phase; and 2) use of O/W microemulsions, in which the precursor is an organometallic salt dissolved in the oil droplets of the microemulsion. The latter approach keeps more resemblance to the typical W/O microemulsion reaction method, as it has the greatest level of precursor confinement.     

The preparation of cobalt complexes containing simple sulphur-nitrogen ligands,S2N2H− and S3N−, from S4N4O2

Summary Reactions of Group VIII metal halides [CoCl₂, NiCl₂, K₂PdCl₄, PdCl₂(PhCN)₂ and PtCl₂] with tetrasulphurtetranitrogendioxide, S₄N₄O₂, have been investigated. The cobalt reaction yields Co(S₂N₂H)₂, Co(S₂N₂H)(S₃N) and Co(S₃N)₂. The usefulness of metal centres for trapping reactive sulphur-nitrogen centres is discussed.     

Gas permeability,diffusivity, solubility,and aging characteristics of 6FDA-durene polyimide membranes

We have determined the intrinsic gas transport properties of He, H₂, O₂, N₂, CH₄, and CO₂ for a 6FDA-durene polyimide as a function of pressure, temperature and aging time. The permeability coefficients of O₂, N₂, CH₄, and CO₂ decrease slightly with increasing pressure. The pressure-dependent diffusion coefficients and solubility coefficients are consistent with the dual-sorption model and partial immobilization. All the gas permeabilities increase with temperature and their apparent activation energies for permeation increase with increasing gas molecular sizes in the order of CO₂, O₂, N₂, and CH₄.The percentages of permeability decay after 280 days of aging are 22, 32, 36, 40, 42, and 30% for He, H₂, O₂, N₂, CH₄, and CO₂, respectively. Interestingly, except for H₂ (kinetic diameter of 2.89 Å), the percentages of permeability decay increase exactly in the order of He (kinetic diameter of 2.6 Å), CO₂ (3.30 Å), O₂ (3.46 Å), N₂ (3.64 Å), and CH₄ (3.80 Å). The apparent activation energies of permeation for O₂, N₂, CH₄, and CO₂ increase with aging because of the increases in activation energies of diffusion and the decreases in solubility coefficients. The activation-energy increase for diffusion is probably due to the decrease in polymeric molar volume because of densification during aging. The reduction in solubility coefficient indicates the available sites for sorption decreasing with aging because of the reduction of microvoids and interstitial chain space.     

Infrared,electronic, and electron spin resonance spectra of pyridine-2,6-dithiocarbomethylamide copper(II) complexes

Copper(II) complexes of pyridine-2,6-dithiocarbomethylamide (P DT A) of the general formula CuP DT A-X,L (X=Cl₂, Br₂, I₂, NO₃, SO₄, 2 HC₂O₄, H₂O, NH₃, pyridine) have been prepared and characterized by elementary analysis, infrared-, electronic reflectance- and spin resonance- spectroscopy. The influence of the coordinated anions on the molecular stereochemistries is discussed on the basis of these data. The thermal behaviour of the complexes is described.