Electron transfer properties and electrocatalytic behavior of tyrosinase on ZnO nanorod

In this work, the adsorption of tyrosinase on ZnO nanorods and its electrocatalytic behaviors were investigated. The mushroom tyrosinase with low isoelectric point was expected to adhere on the positively charged surface of ZnO nanorods by electrostatic attraction in a neutral solution. Scanning electron microscope images and spectroscopic analysis demonstrated the adsorption of tyrosinase on ZnO nanorods and the adsorbed tyrosinase remain its bioactivity to a large extent. In the presence of tyrosinase, a roughly and cyathiform of nanosized ZnO films was obtained. This open, three-dimensioned ramiform structure made the move through and exchange the electron with GCE more easily, and thus accelerating the electron transfer between electroactive and GCE. The adsorbed tyrosinase could catalyze the oxidation of phenol and catechol. The linear concentration ranges were from 0.02 to 0.1 mM and 0.01 to 0.4 mM, for phenol and catechol, respectively. The apparent Michaelis-menten constant , a reflection of the enzymatic affinity, was 0.24 mM for phenol and 1.75 mM for catechol, which suggests a large affinity to phenolic compound. The proposed methods presented a way for further studies of the immobilization and electrochemistry of proteins on nanostructured materials.     

Photoelectron spectroscopic study of iron–benzene cluster anions

Iron–benzene cluster anions, (n = 1–7, m = 1–4), were generated via laser vaporization and studied using mass spectrometry, anion photoelectron spectroscopy and in one case by density functional theory. Based on these studies, we propose that and Fe₁Bz₁ as well as and Fe₂Bz₁ exhibit half-sandwich structures, that and Fe₁Bz₂, and Fe₂Bz₂, as well as Fe₃Bz₂ and Fe₄Bz₂ are sandwich structures, and that and Fe₂Bz₃ and larger species form ‘rice-ball’ structures which in each case consist of benzene molecules surrounding an iron cluster core.     

Thermochemical properties of the rare earth complexes with pyromellitic acid

Fourteen rare earth complexes with pyromellitic acid were synthesized and characterized by means of chemical and elemental analysis, and TG–DTG. The constant-volume combustion energies of complexes, Δ_cU, were measured by a precise rotating-bomb calorimeter (RBC-type II). Their standard molar enthalpies of combustion, , and standard molar enthalpies of formation, , were calculated at T = 298.15 K. The relationship of and with the atomic numbers of the elements in the lanthanide series was examined. The results show that a certain amount of covalence is present in the chemical bond between rare earth cations and the ligand.     

First principles study of the structure, electronic state and stability of cations

Structural and electronic properties of semiconductor binary microclusters cations have been investigated using the B3LYP-DFT method in the ranges of n=1, 2 and m=1–7. Full structural optimization, adiabatic ionization potentials calculation and frequency analysis are performed with the basis of 6-311+G(d). The charged-induced structural changes in these cations have been discussed. The strong As–As bond is also favored over Al–As bonds in the cations in comparison with corresponding neutral cluster. With As_m forming the base, adding Al atom(s) in different positions would find the stable structures of cations quickly and correctly. , , and are predicted to be species with high stabilities and possible to be produced experimentally.     

A TEM investigation of the (Bi1−xSrx)FeO3−x/2, 0.2≤x≤0.67, solid solution and a suggested superspace structural description thereof

A careful transmission electron microscopy (TEM) investigation of an incommensurately modulated member of the (Bi_1−xSr_x)Fe³⁺O_3−x/2□_x/2, 0.2≤x≤0.67, solid solution has been carried out. High resolution (HR) TEM imaging is used to show the presence of at least 6-fold twinning on a rather fine (5 nm) scale. The (3+1)-d superspace group symmetry is suggested to be or one of the non-centrosymmetric sub-groups thereof, namely , , and . A superspace construction is then used to propose the nature of the local compositional ordering and, hence, of the oxygen-deficient slab that intergrows with the perovskite slab to produce the observed solid solution phase. The proposed compositional superspace atomic surfaces can be used to produce model structures at any composition within the solid solution range.     

Geometries, stability and aromaticity of , [M(Al2P2)] (M = Li, Na, K, Cu) and N(Al2P2) (N = Be, Mg, Ca, Zn) clusters

Geometrical structure, aromaticity and other properties of , [M(Al₂P₂)]⁻ (M = Li, Na, K, Cu) and N(Al₂P₂) (N = Be, Mg, Ca, Zn) species are theoretically investigated with density functional theory (DFT) methods. Calculation results show that for species, the planar structure, with D_2h symmetry at the ¹A_g state, is the global minimum at the B3LYP/6-311+G_* level. Natural bond orbital (NBO) analysis indicates the existence of delocalization in the most stable species and its pyramidal complexes. Nucleus-independent chemical shift (NICS) and molecular orbital (MO) analysis further reveal that that pyramidal [M(Al₂P₂)]⁻ and N(Al₂P₂) species preserve the aromatic nature of the most stable unit.     

The photophysics of 7H-adenine: A quantum chemical investigation including spin–orbit effects

Vertical and adiabatic electronic spectra have been investigated by means of combined density functional and multi-reference configuration interaction methods. Spin–orbit coupling has been determined employing a non-empirical spin–orbit mean-field operator. In the vertical absorption spectrum of isolated 7H-adenine, the transitions to the lowest ¹ state, the optically bright ¹ state, and a so far unknown ¹(π_H → (Ryd, σ^*)) state are predicted to lie very close to each other. The strong ¹ transition at 4.8 eV is the lowest excitation of ¹(π → π^*) type in 7H-adenine. It is red shifted by about 0.3 eV with respect to the corresponding excitation in the 9H-tautomer. We find the global minimum on the S₁ potential energy hypersurface at about 4.2 eV for a ¹ electronic structure. A potential well with a minimum at 4.3 eV exhibits mixed ¹ character. A planar ¹ structure with a potential energy of 4.6 eV constitutes a stationary point on the S₁ surface. At the present stage it is unclear whether it corresponds to a minimum or a saddle-point. The lowest-lying ¹(π → (Ryd, σ^*)) state is metastable with respect to N₇–H₁₄ bond dissociation. Its inner (Rydberg) potential well with an adiabatic excitation energy of 4.6 eV represents another minimum on the S₁ PEH. From the theoretical results presented in this work, we conclude that isolated 7H-adenine will be able to emit photons for excitation energies below 4.7 eV(264 nm). Above this threshold singlet excited 7H-adenine can undergo ultrafast non-radiative relaxation to the electronic ground state, either by hydrogen detachment via the ¹(π → (Ryd, σ^*)) channel or via a conical intersection of the ¹ state along a ring puckering mode. The ³ T₁ state can be efficiently populated via intersystem crossing from one of the S₁ potential energy wells. Large-amplitude motions in the T₁ state along an out-of-plane distortional coordinate lead to significant configuration interaction of the ¹ and ¹ structures which lend intensity to the phosphorescence.     

Ab initio electronic and rovibrational structure of

The electronic structure of the ground state of has been investigated using relativistically-corrected CCSD(T) in conjunction with ANO-RCC (Mg) and aug-cc-pVQZ (H) basis sets. The molecular potential energy surface possessed minima corresponding to both ¹A₁ and equilibrium structures (with a ¹Σ⁺ transition state). The ¹A₁ structure possessed R_e and θ_e values of 2.0297 Å and of 22.09°, respectively. The higher-energy structure exhibited an R_e value of 2.1658 Å. Property surfaces were constructed to calculate rovibrational energies and spectral line intensities for the ground states of , (¹A′) MgHD²⁺ and . For the vibration ground state of , the vibration-averaged R_e and θ_e values were calculated to be 2.0209 Å and 22.53°, respectively. The A, B and C rotational constants were calculated to be 58.0, 2.21 and 2.11 cm⁻¹, respectively.     

Study of sol–gel derived di-ureasils doped with zinc triflate

Zinc triflate (Zn(CF₃SO₃)₂)-doped sol–gel derived di-urea cross-linked POE/siloxane ormolytes (designated as di-ureasils) with ∞>n1 (where the salt content is expressed as n, the molar ratio of oxyethylene moieties to Zn²⁺ ions) were investigated. The hybrids with n5 are entirely amorphous; those with n>10 are thermally stable up to approximately 305 °C. The siliceous network of representative samples (n=200 and 10) is essentially composed of (SiO)₃Si(CH₂)-environments and is thus highly branched. The distance between the structural units in samples with 200n10 and n7 is 4.2 and 4.3 Å, respectively. The estimated interdomain distance is 11 and 13 Å for xerogels with 200n20 and n10, respectively. At n=1 a crystalline POE/Zn(CF₃SO₃)₂ complex of unknown stoichiometry is formed. The conductivity maxima are located at n=60 () and n=20 () at 30 and 100 °C, respectively.     

Excess thermodynamic properties, and for the binary systems {1,2-dichloropropane + 2-alkoxyethanols} at T = 298.15 K

This article presents the experimental data of and , obtained at T = 298.15 K and atmospheric pressure, for four binary systems composed of 1,2-dichloropropane (1,2-DCP) and four 2-alkoxyethanols. The 2-alkoxyethanols are 2-methoxyethanol (2-ME), 2-ethoxyethanol (2-EE), 2-propoxyethanol (2-PE) and 2-butoxyethanol (2-BE). The of the mixture has been shown positive for 2-ME, ‘s-shaped’ for all remaining systems, being negative at low and positive at high mole fraction of 1,2-DCP. The values for all binary mixtures are also shown both positive at low and negative at high mole fraction of 1,2-DCP. The experimental results of and were fitted to Redlich–Kister equation to correlate the composition dependence of both excess properties. In this work, data were also used to test the suitability of thermodynamic models (Wilson, NRTL, and UNIQUAC equations) based on local-composition theory. The results have been qualitatively discussed in terms of the polarity, self-association, and hydrogen bond among molecules.     

Electron correlation contribution to the /ceria(1 1 1) interaction

We have investigated the electron correlation contribution to the interaction energy of the N₂O/ceria(1 1 1) system at the CCSD(T) level. N₂O binds either with the N-end towards the surface with an interaction energy or with the O-end with . In the former case almost the entire binding energy is due to electron correlation effects, in the latter these effects contribute with about 60%. Analyses of the interaction energy contributions show that most of the electron correlation part originates from the interaction of N₂O with the O ions in the topmost surface layer.     

Effect of pressure and temperature on structural stability of potential hydrogen storage compound Li3AlH6

The crystal structure of Li₃AlH₆ was investigated at high pressures upto 27 GPa using a diamond anvil cell with synchrotron radiation in addition to high temperature X-ray diffraction. Density functional theoretical (DFT) calculations were performed simultaneously. While the structure of Li₃AlH₆ is stable on increasing temperature, the results of high pressure experiments show a pressure induced phase transition from the ambient phase to a high pressure cubic phase around 10.6 GPa. The transition pressure of 10.6 GPa and the bulk modulus value B₀ = 32(2) GPa for the phase obtained are in good agreement with the theoretical results.     

Hexachloroiridate(IV) as a redox probe for the electrochemical discrimination of B-DNA and M-DNA monolayers on gold

This paper demonstrates the effectiveness of using the redox couple to investigate DNA monolayers, and compares the potential advantages of this system to the standard redox couple. B-DNA monolayers were converted to M-DNA by incubation in buffer containing 0.4 mM Zn²⁺ at pH 8.6 and studied by cyclic voltammetry (CV), impedance spectroscopy (IS) and chronoamperometry (CA) with . Compared to B-DNA, M-DNA showed significant changes in CV, IS and CA spectra. However, only small changes were observed when the monolayers were incubated in Mg²⁺ at pH 8.6 or in Zn²⁺ at pH 6.0. The heterorgeneous electron-transfer rate (k_ET) between the redox probe and the surface of a bare gold electrode was determined to be 5.7 × 10⁻³ cm/s. For a B-DNA modified electrode, the k_ET through the monolayer was too slow to be measured. However, under M-DNA conditions, a k_ET of 1.5 × 10⁻³ cm/s was reached. As well, the percent change in resistance to charge transfer, measured by IS, was used to illustrate the dependence of M-DNA formation on pH. This result is consistent with Zn²⁺ ions replacing the imino protons on thymine and guanine residues. The redox couple was also effective in differentiating between single-stranded and double-stranded DNA during de-hybridization and rehybridization experiments.     

Nucleophilic and electrophilic radical attack on maleic and fumaric acids in aqueous solution

Rate coefficients (k) of CH₂OH, , and radical addition to maleic and fumaric acids were investigated between pH 1 and 8. Strong pH dependences observed were attributed to changes in protonation states of acids: H₂X, HX⁻ and X²⁻. k of CH₂OH, , addition to fumaric acid decreased in the order k_H2F>k_HF^->k_F^2- in agreement with the nucleophilic character of reaction. The electrophilic radical showed opposite tendency. With maleic acid the monoanion had the highest reactivity towards nucleophilic and the lowest one towards electrophilic radicals. This is attributed to a prevalence of steric over polar effects for HM⁻.     

Self-assembly, crystal structure and photoluminescent properties of a novel organic–inorganic hybrid coordination polymer: [CdCl3(CH3)3NH]

A novel organic–inorganic coordination polymer [CdCl₃(CH₃)₃NH] 1 was synthesized by the reaction of CdCl₂ with trimethylamine (TMA) at 170 °C for 5 days in ethanol and structurally characterized by means of X-ray single diffraction. The title compound affords a one-dimensional chain structure. It crystallizes in hexagonal system space group P6(3)/m with , , , γ=120.00°, , Z=2, , F(000)=266, Mr=277.86, , the final R=0.0420 and ωR=0.1020 for 355 observed reflections with I>2σ(I). The title compound consists of cation [(CH₃)₃NH]⁺ and anion chain , and they are combined by static attracting forces in the crystal. TG–DTA, XRD and IR data for the title compound are reported and discussed. The photoluminescent properties of the compound 1 were also investigated.     

Low-temperature heat capacities and standard molar enthalpy of formation of the solid-state coordination compound trans-Cu(Ala)2(s) (Ala = l-α-alanine)

Low-temperature heat capacities of the solid coordination compound trans-Cu(Ala)₂(s) have been measured by a precision automated adiabatic calorimeter over the temperature range from T = 78 K to 390 K. The experimental values of the molar heat capacities in the temperature region were fitted to a polynomial equation of heat capacities (C_p,m) with the reduced temperatures (X), [X = f (T)], by a least square method. The smoothed molar heat capacities and thermodynamic functions of the complex trans-Cu(Ala)₂(s) were calculated based on the fitted polynomial. The smoothed values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated with an interval of 5 K. Enthalpies of dissolution of {Cu(Ac)₂·H₂O(s) + 2Ala (s)} and 2:1 HAc (aq) in 100 ml of 2 mol dm⁻³ HCl, respectively, and trans-Cu(Ala)₂(s) in the solvent [2:1 HAc (aq) + 2 mol dm⁻³ HCl] at T = 298.15 K were determined to be , , and by means of an isoperibol solution-reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as from the enthalpies of dissolution and other auxiliary thermodynamic data using a Hess thermochemical cycle.     

Is Cd2 truly a van der Waals molecule? Analysis of rotational profiles recorded at the , transitions

Rotational profiles of the ²²⁸Cd₂ isotopomer recorded in the (υ′, υ″) = (26, 0), (27, 0), (42, 0), (45, 0), (46, 0), (48, 0) vibrational bands of the transition were analysed. As a result, the , , , , and excited- as well as the ground-state rotational constants of the (¹¹⁴Cd)₂ were determined. The analysis allowed determining the absolute values for the and excited- and ground-state bond lengths, respectively. The obtained result – the – distinctly shorter than that obtained with assumption of pure ground-state van der Waals bonding, supports a theoretical prediction of a covalent admixture to the bonding. Analysis of the partially-resolved rotational profile recorded in the (υ′, υ″) = (38, 0) band of the same isotopomer recorded at the transition allowed estimating the rotational constant in the B1_u state.     

Modeling of vibration–electronic–chemistry coupling in the atomic–molecular oxygen system

The comprehensive analysis of the kinetic processes in the atomic–molecular oxygen system is conducted on the base of the novel state-to-state model involving both electronically and vibrationally excited O₂ molecules: and O(³P), O(¹D) atoms as well as vibrationally excited O₃(¹A₁) molecules. The model describes properly experimental data on the total removal rate of vibrationally excited molecules, the temporal evolution of the population of , and on the variation of vibrational temperature of behind strong shock wave. It is demonstrated that to describe with reasonable accuracy the variation of macroscopic flow parameters (pressure, temperature, density, and velocity) in the post shock region it is sufficient to use the widely applied model of mode approximation but in order to predict properly the species concentrations and populations of vibronic states of molecules just downstream the shock front it is needed to use state-to-state consideration.     

Excess molar volumes and excess molar enthalpies of binary mixtures for 1,2-dichloropropane + 2-alkoxyethanol acetates at 298.15 K

The excess molar volumes and excess molar enthalpies over the whole range of composition have been measured for the binary mixtures formed by 1,2-dichloropropane (1,2-DCP) with three 2-alkoxyethanol acetates at 298.15 K and atmospheric pressure using a digital vibrating-tube densimeter and an isothermal calorimeter with flow-mixing cell, respectively. The 2-alkoxyethanol acetates are ethylene glycol monomethyl ether acetate (EGMEA), ethylene glycol monoethyl ether acetate (EGEEA), and ethylene glycol monobutyl ether acetate (EGBEA). The of the mixture has been shown positive for EGMEA, ‘S-shaped’ for EGEEA, being negative at low and positive at high mole fraction of 1,2-DCP, and negative for EGBEA. All the values for the above mixtures showed an exothermic effect (negative values) which increase with increase in carbon number of the 2-alkoxyethanol acetates, showing minimum values varying from −374 J mol⁻¹ (EGMEA) to −428 J mol⁻¹ (EGBEA) around 0.54–0.56 mol fraction of 1,2-DCP. The experimental results of and were fitted to Redlich–Kister equation to correlate the composition dependence of both excess properties. In this work, the experimental excess enthalpy data have been also correlated using thermodynamic models (Wilson, NRTL, and UNIQUAC) and have been qualitatively discussed.     

Adsorption of the first row of transition metals on the perfect and defective MgO(1 0 0) surface

We present DFT calculations for adsorption of the first row of transition metal atoms on a MgO(1 0 0) surface and on a surface exhibiting defects. Some atoms exhibit a high adsorption energy on the defect (e.g. Co, Ni and Cu), but others (Ca, Sc) rather adsorb on a clean surface and another set is indifferent to the presence of defect. The adsorption becomes energetically unfavorable when the σ anti-bonding orbitals become populated; this is worse on a defective surface than on a terrace. The π back-donation to the surface contributes to favor the adsorption on the center.