Nitrogen and sulfur co-doped TiO2 nanosheets with exposed {001} facets: synthesis, characterization and visible-light photocatalytic activity

Nitrogen and sulfur co-doped TiO(2) nanosheets with exposed {001} facets (N-S-TiO(2)) were prepared by a simple mixing-calcination method using the hydrothermally prepared TiO(2) nanosheets powder as a precursor and thiourea as a dopant. The resulting samples were characterized by transmission electron microscope, X-ray diffraction, N(2) adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-Vis absorption spectroscopy. The electronic properties of N,S co-doped TiO(2) were studied using the first-principle density functional theory (DFT). The photocatalytic activity of N-S-TiO(2) was evaluated by degradation of 4-chlorophenol (4-CP) aqueous solution under visible light irradiation. The production of hydroxyl radicals (˙OH) on the surface of visible-light-irradiated samples was detected by photoluminescence technique using terephthalic acid as a probe molecule. The results show that nitrogen and sulfur atoms were successfully incorporated into the lattice of TiO(2), which resulted in N-S-TiO(2) samples exhibiting stronger absorption in the UV-visible range with a red shift in the band gap transition. The first-principle DFT calculations further confirm that N and S co-dopants can induce the formation of new energy levels in the band gap, which is associated with the response of N-S-TiO(2) nanosheets to visible light irradiation. Surprisingly, pure TiO(2) nanosheets show the visible-light photocatalytic activity for the degradation of 4-CP mainly due to the substrate-surface complexation of TiO(2) and 4-CP, which results in extending absorption of titania to visible light region through ligand-to-titanium charge transfer. The N-S-TiO(2) samples studied exhibited an enhanced visible-light photocatalytic activity than pure TiO(2). Especially, the doped TiO(2) sample at the nominal weight ratio of thiourea to TiO(2) powder of 2 showed the highest photocatalytic activity, which was about twice greater than that of Degussa P25. The enhanced activity of N-S-TiO(2) can be primarily attributed to the synergetic effects of two factors including the intense absorption in the visible-light region and the exposure of highly reactive {001} facets of TiO(2) nanosheets. The former is beneficial for the photogeneration of electrons and holes participating in the photocatalytic reactions, and the latter facilitates adsorption of 4-CP molecules on the surface of TiO(2) nanosheets.     

Synthesis and characterization of sulfur-titanium dioxide nanocomposites for photocatalytic oxidation of cyanide using visible light irradiation

A sol-gel method was used to prepare TiO2and sulfur-TiO2(S-TiO2)nanocomposites, which were characterized by N2 adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescene, ultraviolet visible and transmission electron microscopy measurements. The photocatalytic performance of TiO2 and S-TiO2nanocomposites, with respect to the photocatalytic oxidation of cyanide under visible light irradiation, was determined. The results reveal that S is well dispersed on the surface of TiO2 nanoparticles. Additionally, the surface area of the S-TiO2nano-composites was observed to be smaller than that of the TiO2nanoparticles because of blocked pores caused by doping with S. The S-TiO2nanocomposite (0.3 wt% S) exhibited the lowest band gap and the highest photocatalytic activity in the oxidation of cyanide. The photocatalytic performance of S-TiO2(0.3 wt% S) nanocomposites was stable, even after the fifth reuse of the nanoparticles for the oxidation of cyanide.     

Mechanistic studies of the photocatalytic oxidation of trichloroethylene with visible-light-driven N-doped TiO2 photocatalysts

Visible-light-driven TiO2 photocatalysts doped with nitrogen have been prepared as powders and thin films in a cylindrical tubular furnace under a stream of ammonia gas. The photocatalysts thus obtained were found to have a band-gap energy of 2.95 eV. Electron spin resonance (ESR) under irradiation with visible light (lambda > or = 430 nm) afforded the increase in intensity in the visible-light region. The concentration of trapped holes was about fourfold higher than that of trapped electrons. Nitrogen-doped TiO2 has been used to investigate mechanistically the photocatalytic oxidation of trichloroethylene (TCE) under irradiation with visible light (lambda > or = 420 nm). Cl and O radicals, which contribute significantly to the generation of dichloroacetyl chloride (DCAC) in the photocatalytic oxidation of TCE under UV irradiation, were found to be deactivated under irradiation with visible light. As the main by-product, only phosgene was detected in the photocatalytic oxidation of TCE under irradiation with visible light. Thus, the reaction mechanism of TCE photooxidation under irradiation with visible light clearly differs markedly from that under UV irradiation. Based on the results of the present study, we propose a new reaction mechanism and adsorbed species for the photocatalytic oxidation of TCE under irradiation with visible light. The energy band for TiO2 by doping with nitrogen may involve an isolated band above the valence band.     

One-step solvothermal synthesis of N-doped TiO2 nanoparticles with high photocatalytic activity in the reduction of aqueous Cr（Ⅵ）

N-doped TiO2 （N-TiO2） nanoparticles were synthesized via a one-step low temperature （180℃） solvothermal route, which adopted NH4NO3 as the nitrogen source. The structure, composition, BET specific surface area, and optical properties of the as-synthesized product were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2 adsorption- desorption isotherms, and UV-vis diffuse reflectance spectroscopy. In addition, its photocatalytic properties were tested by the reduction of aqueous Cr（VI） under UV and visible light （x 〉 420 rim） irradiation. It was observed that for the reduction of aqueous Cr（VI）, the as-synthesized N-TiO2 nanoparticles not only exhibited much higher photocatalytic activity than P25 TiO2 under UV light, but also exhibited remarkably high photocatalytic activity under visible light （λ 〉 420 nm）.     

Synthesis and study of plasmon-induced carrier behavior at Ag/TiO2 nanowires

Nanocomposites of Ag/TiO(2) nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO(2) nanowires and subsequent photoreduction of Ag(+) ions to Ag nanoparticles (AgNPs) on the TiO(2) nanowires. The as-prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible-light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO(2) surface rather than by the direct transfer of charge between the two materials. The visible-light-driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.     

N、F共掺杂TiO2可见光响应光催化剂的酸催化水解法制备及表征

采用酸催化水解法由TiCl4、NH4F混合液合成N、F共掺杂可见光响应TiO2光催化剂(TONF). 以苯酚为模型物, 考察了催化剂在可见光区、紫外光区的催化活性. 采用X射线光电子能谱(XPS)、紫外-可见漫反射光谱(DRS)、X射线衍射(XRD)、扫描电子显微镜(SEM)及低温氮物理吸附对光催化剂的晶相结构、光谱特征和表面结构等进行表征. 结果表明, 适量的N、F共掺杂TONF催化剂表现出较高的可见光催化活性. N、F共掺杂可显著提高TiO2分散性能, 促进锐钛矿相的形成, 抑制其向金红石相转变, 提高相转变温度. N掺杂可提高TiO2在可见光区的吸收; F掺杂可使TiO2能隙变窄.     

A Facile One‐Pot Synthesis of Layered Protonated Titanate Nanosheets Loaded with Silver Nanoparticles with Enhanced Visible‐Light Photocatalytic Performance

Layered protonated titanate nanosheets (LPTNs) loaded with silver nanoparticles are prepared by a simple one‐pot hydrothermal route in silver‐ammonia solution. The as‐synthesized Ag‐loaded LPTNs possess large specific surface area. The Ag nanoparticles are highly dispersed on the surface of the LPTNs. They have negligible effects on the crystal structure, crystallinity, and surface area of the LPTNs but result in considerable enhancement of visible‐light absorption and in a red‐shift of the band gap for the LPTNs. The Ag‐loaded LPTNs show enhanced photocatalytic activity for both liquid‐ and gas‐phase reactions under visible‐light irradiation. Moreover, the photocatalytic activity first increases gradually with increasing Ag loading content, and then decreases after maximizing at an optimal Ag content. At the Ag loading content of 2.87 mol % and 1.57 mol %, the Ag‐loaded LPTNs exhibit the highest visible‐light photocatalytic activity for degradation of rhodamine B in water and mineralization of benzene in air, respectively. An alternative possible mechanism for the enhancement of the visible‐light photocatalytic activity is also proposed.     

局部表面等离子体共振可调的MoO3-x-TiO2纳米复合物用于提高可见光下光催化还原CO2的性能(英文)

利用太阳能光催化还原CO₂和H₂O到燃料和化学品是一条极具吸引力但又充满挑战性的转化途径.迄今为止,只有非常有限的光催化剂已经被报道可以在可见光照射下光催化还原CO₂.局部表面等离子体共振(LSPR)现象可以被用作一种有效的开发可见光催化剂的策略.贵金属Au,Ag,Pt等的LSPR现象已经被较为广泛的研究,并应用于光催化、光热、气敏等多种领域.而低价态金属自掺杂的金属氧化物,如MoO_3-x和WO_3-x,也被证明具有LSPR现象,可用于开发更加廉价的可见光催化剂.本文通过简单的溶剂热法成功合成了低价态Mo自掺杂的MoO_3-x纳米片催化剂,并在合成过程中原位加入TiO₂纳米颗粒(TiO₂-NP)和TiO₂纳米棒(TiO₂-NT),构建了MoO_3-x-TiO₂纳米复合物.电镜表征显示,MoO_3-x-TiO     

Role of complex defects in photocatalytic activities of nitrogen-doped anatase TiO(2)

Deep impurity states associated with a substitutional nitrogen at an oxygen site (N(O)) are believed to be the source of the visible-light absorption of nitrogen-doped titanium dioxide (TiO(2)). Our comprehensive study using density functional theory (DFT) plus onsite Coulomb interaction (U) reveals that a titanium atom at an interstitial site (Ti(i)) is highly mobile and strongly binds with N(O). Hybridizations of N p with Ti d states of Ti(i) give rise to a new band at the valence band edge, eliminating the hole-trapping centers originated from the deep N(O) states. The suggested mechanism explains the photocatalytic oxidation reactions as well as the visible-light absorption observed on N-doped anatase TiO(2).     

Characterization and mechanism analysis of Mo-N-co-doped TiO2 nano-photocatalyst and its enhanced visible activity

In this study, Mo-N-co-doped TiO(2) nano-photocatalysts have been synthesized through hydrolysis-precipitation method, combined with sonication posttreatment. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). XRD showed that co-doping with Mo and N favored the formation of anatase and retarded the growth of crystallite size. XPS revealed that N was incorporated into the lattice of TiO(2) through substituting oxygen atoms and coexisted in the forms of β-N and γ-N in co-doped TiO(2). Meanwhile, Mo was also incorporated into the lattice of TiO(2) through substituting titanium atoms and existed in the form of Mo(6+). DRS indicated that the light absorbance in visible region was improved by co-doping with Mo and N, leading to a narrower band gap and higher visible light photocatalytic activity for the degradation of phenol than that of pure and N-doped TiO(2). The enhanced visible light photocatalytic activity of Mo-N-co-doped TiO(2) nano-photocatalyst was attributed to the small crystallite size, narrow band gap and intense light absorbance in visible region. This study provides a new method to synthesize visible light active TiO(2)-based photocatalyst.     

Au <--> N synergy and N-doping of metal oxide-based photocatalysts

N-doping of titania makes photocatalytic activity possible for the splitting of water, and other reactions, under visible light. Here, we show from both theory and experiment that Au preadsorption on TiO2 surfaces significantly increases the reachable amount of N implanted in the oxide. The stabilization of the embedded N is due to an electron transfer from the Au 6s levels toward the N 2p levels, which also increases the Au-surface adhesion energy. Theoretical calculations predict that Au can also stabilize embedded N in other metal oxides with photocatalytic activity, such as SrTiO3 and ZnO, producing new states above the valence band or below the conduction band of the oxide. In experiments, the Au/TiN(x)O(2-y) system was found to be more active for the dissociation of water than TiO2, Au/TiO2, or TiO(2-y). Furthermore, the Au/TiN(x)O(2-y) surfaces were able to catalyze the production of hydrogen through the water-gas shift reaction (WGS) at elevated temperatures (575-625 K), displaying a catalytic activity superior to that of pure copper (the most active metal catalysts for the WGS) or Cu nanoparticles supported on ZnO.     

ZnO纳米柱状阵列表面AgX等离子基元修饰及其可见光光催化活性

采用浸渍法制备了表面AgX（X=I,Br）等离子基元修饰的ZnO纳米柱状阵列,研究了浸渍浓度和时间以及紫外光光照预处理对ZnO纳米柱状阵列可见光光催化活性的影响.采用场发射扫描电子显微镜、X射线衍射仪、紫外可见漫反射吸收光谱以及X射线光电子能谱仪等手段对ZnO纳米柱状阵列的形貌、相组成、禁带宽度及其表面特性进行了表征.结果显示,AgBr颗粒分布于ZnO纳米柱状阵列的顶端及顶端侧面,同时AgBr颗粒之间相互接触而形成网状结构.通过紫外光光照预处理,AgBr表面出现细小颗粒,形成Ag/AgBr/ZnO纳米复合结构.可见光光催化降解甲基橙结果表明,在相同工艺条件下所制AgBr/ZnO的可见光光催化活性明显优于AgI/ZnO,且与浸渍浓度及时间有关.由于ZnO纳米柱状阵列的比表面积大,AgBr的可见光响应特性以及Ag/AgBr纳米结构的表面等离子效应,经过紫外光光照预处理形成的Ag/AgBr/ZnO纳米复合结构表现出最好的可见光光催化活性.     

具有不同Bi/Ti摩尔比的BiOI/TiO2 (A)光催化剂的结构与性能

在室温条件下通过沉积法制备了BiOI敏化纳米锐钛矿TiO₂ (A)光催化剂. 用X射线衍射(XRD),X射线光电子能谱(XPS), 光致发光(PL)光谱和紫外-可见漫反射(UV-Vis DRS)等手段对其进行了表征. 通过罗丹明B(RhB)催化降解实验评价了其光催化活性. 随BiOI含量增加, BiOI/TiO₂ (A)在370-630 nm的吸收强度增强, 吸收带边红移增加, 紫外和可见光催化活性先增加, 当BiOI含量约为1.7% (质量分数)时, 各自达到最大值, 然后随BiOI含量的进一步增加而减小. 1.7% BiOI/TiO₂ (A)的可见光活性明显高于P25, 它的紫外光活性也略高于P25. 在BiOI含量相近时, BiOI/TiO₂ (A)比BiOI/P25具有更低的光催化活性. 和TiO₂ (A)相比, 1.7% BiOI/TiO₂ (A)明显具有更高的紫外和可见光催化活性, 这归功于它在370-630 nm的强吸收、吸收带边红移明显以及光生电子和空穴的有效转移, 减少了电子-空穴对的复合.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

乙酸修饰Ag/TiO2复合光催化剂的制备及协同催化性能

利用光化学还原法制备了Ag/TiO₂,然后通过乙酸浸渍制备了HAc-Ag/TiO₂复合光催化剂.利用X射线衍射（XRD）、透射电子显微镜（TEM）、傅里叶变换红外光谱（FTIR）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）等手段表征了催化剂的性质.以降解水溶液中的甲基橙（MO）为探针反应,考察了催化剂在可见光下的光催化性能.结果表明,乙酸对TiO₂的修饰在TiO₂禁带中产生了"带尾",使TiO₂的禁带宽度发生了显著的缩减;Ag纳米粒子和乙酸共同修饰的HAc-Ag/TiO₂样品具有更窄的禁带宽度和更正的价带顶位置;Ag和乙酸的协同作用使HAc-Ag/TiO₂具有良好的可见光催化活性：可见光照射2 h后,甲基橙在HAc-Ag/TiO₂上的降解率接近100%.     

蛋氨酸改性TiO2空心纳米盒高效可见光催化RhB分解和NO氧化

由高能面 TiO2纳米片 (TiO2-NSs) 组装成的 TiO2空心纳米盒 (TiO2-HNBs)显示出比单独 TiO2-NSs 更强的光催化性能, 但是 TiO2-HNBs 依然属于紫外光催化剂, 无法充分利用太阳能. 因此, 开发具有可见光响应的由高能面 TiO2-NSs 组装而成的 TiO2-HNBs 具有重要意义. 本文将立方体 TiOF2与含有 N 和 S 元素的生物分子蛋氨酸混合, 通过一步焙烧制备了具有可见光响应活性的 N 和 S 元素共掺杂的 TiO2-HNBs(掺杂催化剂标记为 TMx, 未掺杂催化剂标记为 Tx, x 代表焙烧温度).由立方体 TiOF2到锐钛矿相 TiO2空心纳米盒的转变是一个自模板转化过程. 氟离子的存在降低了 TiO2高能面(001)面的表面能, 从而使得高能面 TiO2纳米片的形成变得可能. 因此, 热处理立方体 TiOF2可得到由高能面 TiO2纳米片组装的 TiO2空心纳米盒.本文系统研究了焙烧温度 (300-500 ℃) 对所制 TiO2-HNBs 结构与光催化性能的影响. 结果发现, 在 350 ℃下焙烧, TiOF2完全转化成锐钛矿相 TiO2-HNBs. 但是焙烧蛋氨酸与 TiOF2的混合物, 需 400 ℃才能完全实现 TiOF2到锐钛矿相TiO2-HNBs 的转变. 这说明蛋氨酸的加入阻碍了 TiOF2向锐钛矿相 TiO2-HNBs 的转变. XPS 结果显示, 经过 400 ℃焙烧的蛋氨酸改性样品 (TM400), N 和 S 元素成功掺入了 TiO2-HNBs 晶格, 使其产生可见光催化活性.相对于 400 ℃焙烧 TiOF2所得样品 T400, 蛋氨酸改性的 TM400 催化剂可见光降解罗丹明 B 染料 (RhB) 和 NO 氧化的性能分别提升了 1.55 倍和 2.0 倍, 这与其更强的可见光吸收性能和光生载流子分离效率有关. 400 ℃焙烧的蛋氨酸改性的 TM400 可见光催化活性稳定, 连续 5 次可见光催化 RhB 降解后, 其活性没有明显改变, 显示了潜在的应用前景.     

Correlation between the band positions of (SrTiO3)1-x.(LaTiO2N)x solid solutions and photocatalytic properties under visible light irradiation

N-doped SrTiO3 and (SrTiO3)1-x.(LaTiO2N)x samples were prepared by the thermal ammonolysis method. The photocatalytic activities of the samples were investigated in a water suspension system. Aqueous methanol solution (50 mL CH3OH + 220 mL H2O) for H2 evolution and aqueous silver nitrate solution (270 mL, 0.01 mol L(-1)) for O2 evolution were used as sacrificial reagents. The oxynitrides showed photocatalytic activities under visible light irradiation. The maximum rates of photocatalytic hydrogen and oxygen evolution under visible light irradiation (lambda > 420 nm) were 10 and 8 micromol h(-1), respectively. The samples were characterized by X-ray diffractometry, UV-Vis spectrophotometry, Fourier transform infrared spectrometry, and laser Raman spectroscopy. The unit cell edge length of (SrTiO3)1-x.(LaTiO2N)x increased linearly and their band gaps reduced from 3.18 to 2.04 eV with increasing x from 0 to 0.30. Moreover, the calculation results of (SrTiO3)0.75.(LaTiO2N)0.25 by density functional theory suggested that the band gap narrowing of the solid solutions came from the hybridization of N2p and O2p orbital. The band positions of the solid solutions were further investigated by Mott-Schottky and the onset potential method. The results suggested that the conduction band of the solid solution was lowered, which led to decrement of the hydrogen evolution rate.     

Photodegradation of toluene over TiO(2-x)N(x) under visible light irradiation

We report the photooxidation of toluene over nitrogen doped TiO(2) (TiO(2-x)N(x)) under visible light irradiation. The photocatalytic oxidation of toluene in air over TiO(2-x)N(x) powders was studied using diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), gas chromatography (GC), ion chromatography (IC), and gas chromatography mass spectrometry (GC-MS), focusing on the photocatalytic decomposition processes of toluene. Results obtained indicate that toluene, weakly adsorbed on the catalyst surface, is initially photooxidized to benzaldehyde which adsorbs onto the TiO(2-x)N(x) surface more strongly, leading to the formation of ring-opening products such as carboxylic acids and aldehydes. No gaseous intermediates were detected during the photooxidation. Major intermediates adsorbed at the catalyst surface were oxalic acid, (COOH)(2), acetic acid, CH(3)COOH, formic acid, HCOOH, and pyruvic acid, CH(3)COCOOH, whereas more complicated carboxylic species, including propionic acid, CH(3)CH(2)COOH, isovaleric acid, (CH(3))(2)CHCH(2)COOH, and succinic acid, (CH(2)COOH)(2), were also found in the early stage of the photooxidation. These intermediate products were gradually photodegraded to CO(2) and H(2)O under visible light irradiation.     

Ag／TiO2复合纳米催化剂的制备和表征及其光催化活性

 采用光还原沉积贵金属法，制备了Ag／TiO2复合纳米催化剂．通过调节溶液的pH值控制TiO2表面负载银的形貌，利用AAS，XRD，TEM和XPS等手段对样品进行了表征．以苯胺氧化为模型反应，考察了Ag／TiO2复合纳米催化剂样品的光催化活性以及银沉积量和沉积形貌对催化剂活性的影响．结果表明，通过调控光还原沉积条件，可在平均粒径为24nm左右的TiO2颗粒上获得3nm左右均匀分散的银粒子；在TiO2上沉积适量的具有较高分散度的金属Ag，能有效提高TiO2对苯胺氧化反应的光催化活性．     

具有SPR效应的Ag/Ag2MoO4材料在可见光区的光催化性能研究

作为一类新兴的光催化材料,钼酸盐纳米材料具有高表面能、多活性位点和高选择性等优点,在可见光催化降解污染物方面有着重要应用,近年来受到广泛关注.作为钼酸盐家族重要的一员,钼酸银在杀菌、表面增强拉曼光谱、气敏材料等方面均有重要应用,但其光催化性能却鲜见报道.这是由于它的光谱响应范围窄和广生载流子分离效率低所致.虽然近来有少量基于钼酸银的复合材料的光催化研究,但催化效果不佳.众所周知,作为自由电子体系,诸多金属纳米粒子,如贵金属、碱金属等,存在表面等离子体共振效应(SPR),使得贵金属,特别是Ag,Au等纳米粒子在可见区域有较强的吸收.利用这一特性,Awazu等将Ag纳米颗粒沉积在TiO2表面,创造性地将SPR应用于光催化反应,开发出在可见光谱区具有宽光谱吸收特征的Ag/TiO2.随后陆续合成出基于SPR效应的Ag@AgCl,Ag/Ag3PO4材料均具有良好的光催化性能.基于此,本文在十二烷基硫酸钠(SDS)的存在下,采用水热法一步合成了具有SPR效应的Ag/Ag2MoO4可见光催化材料,并利用X射线粉末衍射(XRD)、紫外可见漫反射(DRS)、X射线光电子能谱(XPS)和扫描电子显微镜(SEM)等技术对材料进行了表征.系统地探讨了体系pH值、反应时间、表面活性剂用量对产物的晶相和微观形貌等的影响.此外,还利用罗丹明B降解实验考察了上述合成条件对材料可见光催化活性的影响,并通过捕获剂实验深入地研究了起催化作用的活性物种.XRD结果表明,体系的pH值对材料的晶型有极大影响,随着pH由酸性变至中性、碱性,最终得到的钼酸银也由Ag2Mo2O7过渡到Ag2MoO4.SEM图显示在最优条件(pH为7,加入0.5 g SDS,160oC下水热14 h)下制得的钼酸银为八面体的Ag2MoO4,且其表面均匀地分布着Ag纳米颗粒,与XPS图谱结果一致.另外表面活性剂SDS的用量对所合成材料的形貌影响很大.本文可一步得到以八面体Ag2MoO4为主的Ag/Ag2MoO4复合材料,是因为SDS的疏水长链可以诱导Ag2MoO4的各向异性生长.DRS结果表明,Ag2MoO4八面体上Ag颗粒的引入使其在可见光区的吸收明显加强,因而它在可见光下催化降解罗丹明B降解反应活性增加.捕获剂实验结果表明,起决定性作用的活性物种是光生空穴,另外?OH也起了一定作用.