Electrophoretic and computer analysis of skeletal muscle used for cardiac assistance.

Skeletal muscle has an inherent plasticity which allows it to undergo fibre type transformation when induced by a specific stimulus. Electrical stimulation has been used here to induce transformation of a predominantly fast type skeletal muscle towards a slow, more fatigue-resistant phenotype, which is more suitable for use in long-term cardiac assistance. Muscle samples from animals electrically stimulated for periods up to 6 months have been analysed by electrophoresis for myosin heavy chain (MHC) and myosin light chain (MLC) fast and slow isoforms. Densitometry and computer analysis have been used to determine the pattern of transformation of the different myosin subunits over this time period. MHC and MLC 2 fast to slow isoform switching preceded that of the alkali light chains (MLC1 and MLC3). After 3 months of stimulation the MHC slow isoform was found to have doubled in concentration relative to the unstimulated control muscle and by 4 months accounted for almost 50% of the total MHC content. The slow isoform accounted for 75% of the MLC2 after 4 months of stimulation. The protein products of mRNA isolated from stimulated muscle samples, translated in vitro and separated by electrophoresis, showed that transformation at the mRNA level preceded that at the protein level. By 2-4 weeks of stimulation MLC2 slow isoform mRNA represented over 60% of the total MLC2 mRNA population. An understanding of the molecular structure of muscle during transformation provides insight into its haemodynamic performance in cardiac assistance.     

Capillary electrochromatography without external pressure assistance. Use of packed columns with a monolithic inlet frit

A fused silica capillary column was packed with RP(18) silica stationary phase entrapping the particles between two frits obtained by two different procedures. The inlet frit consisted of a short organic polymer made via a thermopolymerization process while the outlet frit was prepared by sintering the octadecylsilica (ODS) material. The packed column was employed in capillary electrochromatography (CEC) experiments for the separation of three selected test compounds. Retention time and separation efficiency were evaluated. Results were compared with those ones obtained with a packed capillary containing the same stationary phase entrapped between two sinterized frits. The novel packed column exhibited comparable separation efficiency and resolution with the traditional one. However, it allowed experiments without pressure support during the runs with no bubble formation.     

An improvement in the bending ability of a hinged trisaccharide with the assistance of a sugar-sugar interaction

Hinged di- and trisaccharides incorporating 2,4-diamino-beta-D-xylopyranoside as a hinge unit (Hin) were synthesized. Bridging of the diamino group of Hin by carbonylation or chelation to a metal ion results in a conformational change from (4)C1 to (1)C4, which in turn causes a bending of the oligosaccharides. In this study, the bending abilities of the hinged oligosaccharides were compared, in terms of the reactivities toward carbonylation and chelation. Di- or trisaccharides containing a 6-O-glycosylated mannopyranoside or galactopyranoside at their reducing ends had bending abilities similar to that of the Hin monosaccharide, probably because there were neither attractive nor repulsive interactions between the reducing and nonreducing ends. However, when Hin was attached at O2 of methyl mannopyranoside (Man alphaMe), the bending ability was dependent on the nonreducing sugar and the reaction conditions. Typically, a disaccharide--Hin beta(1,2)Man alphaMe--was difficult to bend under all the tested reaction conditions, and the bent population in the presence of Zn(II) was only 4%. On the other hand, a trisaccharide--Man alpha(1,3)Hin beta(1,2)Man alphaMe--was bent immediately after the addition of Zn(II) or Hg(II), and the bent population reached 75%, much larger than those of all the other hinged trisaccharides ever tested (<40%). This excellent bending ability suggests an attractive interaction between the reducing and nonreducing ends. The extended conformation was recovered by the addition of triethylenetetramine, a metal ion chelator. Reversible, quick, and efficient bending of the hinged trisaccharide was thus achieved.     

Deciphering composition and connectivity of a natural product with the assistance of MS and 2D NMR

A complementary application of three analytical techniques, viz. multidimensional nuclear magnetic resonance spectroscopy (NMR), mass spectrometry (MS), and single‐crystal X‐ray diffractometry was required to identify and refine two natural products isolated from Millettia versicolor and solvent of crystallization. The two compounds, namely 3‐(2H‐1,3‐benzodioxol‐5‐yl)‐6‐methoxy‐8,8‐dimethyl‐4H ,8H‐pyrano[2,3‐h ]chromen‐4‐one, or durmillone, (I), and (2E )‐1‐(4‐{[(2E )‐3,7‐dimethylocta‐2,6‐dien‐1‐yl]oxy}‐2‐hydroxyphenyl)‐3‐(4‐hydroxyphenyl)prop‐2‐en‐1‐one, (II), could not be separated by routine column chromatography and cocrystallized in a 2:1 ratio with 0.13 molecules of ethanol solvent. Compound (II) and ethanol could not be initially identified by single‐crystal X‐ray analysis due to complex disorder in the aliphatic chain region of (II). Mass spectrometry ensured that (II) represented only one species disordered over several positions in the solid state, rather than several species cohabitating on the same crystallographic site. The atomic identification and connectivity in (II) were established by several 2D (two‐dimensional) NMR techniques, which in turn relied on a knowledge of its exact mass. The derived connectivity was then used in the single‐crystal analysis to model the disorder of the aliphatic chain in (II) over three positions and allowed identification of a partially occupied ethanol solvent molecule that was disordered over an inversion center. The disordered moieties were refined with restraints and constraints.     

Size-controlled deposition of Ag nanoparticles on alumina with the assistance of a photo-induced chromic reaction, and study of their catalytic properties

This paper describes a promising method to synthesize supported metal catalysts based on a photochromic reaction. Highly dispersed Ag nanoparticles (NPs) with a mean diameter of ca. 10 nm stabilized by 3-mercaptopropionic acid (3-MPA) were prepared as a colloidal precursor solution. The zeta electric potential was found to be negatively charged in the region of pH higher than 5 due to the presence of dissociated carboxylate ions (-COO(-)), which led to electric repulsion between Ag NPs and kept the solution in a highly dispersed colloidal state. In the presence of photochromic molecules, trans-2-hydroxychalcone, the photo-irradiation gradually decreased the electric charge on the nanoparticles owing to the formation of flavylium cations, which induced the assembly of Ag NPs. Such photo-induced assembly-dispersion control of Ag NPs enables size selective deposition on a catalyst support, which is controlled by varying the photo-irradiation time.     

Synthesis of colloid silica coated with ceria nano-particles with the assistance of PVP

In this paper, a facile synthesis of 100 nm commercial colloid silica coated with nano-ceria core–shell composite particles by the precipitation method using ammonium cerium nitrate and urea as a precipitator with polyvinylpyrrolidone(PVP) as an assistant was briefly introduced. The results showed that the colloid silica was surrounded by nano-ceria uniformly forming the core–shell composite particles. The synthesis process was further discussed and optimized. It was found that the type and quantity of surfactant played a key role in the process. PVP connected the surface of colloid silica and that of the ceria precursor.