不同形貌金纳米粒子的制备及其表面增强拉曼散射效应的研究

不同形状的金纳米粒子在表面增强拉曼散射(surface enhanced Raman scattering,SERS)中有不同的增强效果,多面体金纳米粒子具有多角结构,显示出比金纳米板更为明显的增强效果,近年来对其合成和性质的研究备受关注。该研究探究了十二面体,二十面体,三角板,球形四种形状的金纳米粒子在SERS中不同的增强效果。分别采用硼氢化钠还原法和以N,N-二甲基甲酰胺(DMF)为还原剂制备金三角纳米片和二十面体金纳米粒子,又以二十面体金纳米粒子为种子制备出十二面体金纳米粒子,并分别以以上三种不同形貌的金纳米粒子及球形金溶胶为基底,4-巯基吡啶,对巯基苯甲酸为探针分子检测了其在不同激发波长下的增强效果。透射电子显微镜结果表明金三角纳米板的平均边长为130nm,二十面体和十二面体金纳米粒子的粒径分别为100和120nm。三者的紫外可见吸收峰分别在589,598和544nm处。表面增强拉曼散射结果表明金多面体比金三角纳米板表现出更好的增强效果。     

光诱导转化法制备片状三角形银纳米粒子的表面增强喇曼散射

采用柠檬酸三钠化学还原法制备球形Ag纳米粒子溶胶,并用高压球形氙灯对球形Ag纳米粒子溶胶进行光诱导实验.利用透射电子显微镜、紫外-可见吸收光谱研究了不同光照时间下的银胶纳米粒子的光谱特性和表面形貌,并以结晶紫为探针分子测量了银胶纳米粒子的表面增强喇曼散射光谱.实验结果表明:随着光照时间的增多,Ag纳米粒子溶胶颜色变化显著;紫外-可见吸收光谱吸收峰从单一峰渐渐显示出多个峰;透射电子显微镜图显示Ag纳米粒子由球形逐渐转变成片状三角形银纳米粒子、截角的片状三角形银纳米粒子;表面增强喇曼散射的增强效应随着光照时间的变化先逐渐增大,然后逐渐减小.     

微波合成的纳米球形CaS∶Ag+荧光体的荧光光谱

在微波场作用下 ,快速合成了CaS∶Ag+荧光体 ,用X射线粉末衍射 (XRD)分析证实了它们是立方晶相。测定了它们的激发光谱和发射光谱 ,发现其发射峰位于 372nm、45 0nm和 5 77nm ,分别是由A′gCa V2 +S 中心的Ag+离子、间隙Ag+离子、A′gCa的Ag+离子和CaS基质自激活产生的 ,随着Ag+的掺杂浓度和助熔剂的改变 ,Ag+离子的几个发光中心互相转化 ,荧光体发出不同颜色的荧光。用扫描电镜 (SEM)观察了它们的晶体形貌和尺寸大小 ,结果表明CaS∶Ag+荧光体的晶体形貌都是球形的 ,但其粒径和晶体的分散性受Ag+的掺杂浓度和助熔剂的影响 ,出现了纳米晶 ( 7～ 10 0nm)和亚微米晶 ( 12 5～ 30 0nm)。     

藻蓝蛋白原位还原Ag(Ⅰ)与纳米Ag(0)形成动态过程的谱学研究

在4℃避光条件下,将藻蓝蛋白(简称PC)与AgNO3作用,通过UV,FS,FTIR等谱学方法研究了PC与Ag(工)原位还原与纳米Ag(0)粒子形成的动态过程.结果显示:PC在615 nm的特征吸收峰强度明显减弱,并随Ag(Ⅰ)浓度增加和时间延长单调降低;PC的荧光发射峰和荧光激发峰也均呈现衰减趋势.同步荧光光谱观察到纳米Ag(0)粒子形成的动态过程.用TEM观察到所形成的Ag(0)分散于PC表面,形成PC为核,纳米银为壳部分包覆的生物缀合物,粒子呈球形,有较窄的分布尺寸,粒径在15～30 nm之间.     

绿色合成银纳米粒子及其在SERS中的应用

采用无毒、绿色的酪氨酸作为还原剂和稳定剂,在碱性条件下还原硝酸银,经60 ℃恒温水浴处理20 min,成功地合成了银纳米粒子。混合溶液颜色由淡黄色变为棕黄色直观地呈现了银纳米粒子的生成。利用紫外可见吸收光谱(UV-Vis)和透射电子显微镜(TEM)对制备样品进行分析和表征。粒子的UV-Vis吸收在412 nm附近。TEM图像显示,银纳米粒子的形状近似球形,粒子直径在15～25 nm。分别以结晶紫(CV)和叶酸(FA)为探测分子,进一步研究了该银纳米粒子的表面增强拉曼散射(SERS)效应。实验结果表明,该合成方法不仅方便、快速、绿色环保,而且合成的银纳米粒子对CV和FA分子有很好的SERS效应。     

银纳米粒子自组织二维有序阵列

采用液液二相转移方法合成出颗粒直径为(4.18±0.5)nm的银纳米粒子溶胶,并用紫外可见光谱对所制得的银纳米粒子溶胶的单分散性和稳定性进行了研究.结果表明,所得到的溶胶相为稳定的、粒径分布窄的单分散体系.红外光谱的分析结果表明,稳定剂1壬基硫醇包缚在银纳米粒子表面.并且,通过自组织方法获得了二维有序的银纳米粒子阵列 关键词： 银纳米粒子 液液二相转移方法 自组织 二维有序阵列     

微波法制备Mn2+掺杂ZnSe纳米材料及谱学性能研究

过渡金属掺杂的Ⅱ-Ⅳ族纳米材料有望替代CdSe类量子点作为新型的荧光标记物而受到广泛关注.利用微波加热法的体加热特点,以不同有机胺为配体溶剂,控制反应条件,制备了Mn2+掺杂的ZnSe纳米材料,并分别利用TEM、EDS、荧光光谱等手段对其形貌、结构和性能的关系进行了探索.Mn2+掺杂的纳米ZnSe粒子为200～500 nm的球形粒子,表面平整,为单晶的纤锌矿结构.掺杂后纳米粒子的发射峰显示Mn2+的跃迁发射,但不同的配体溶剂和掺杂量对产物的发光性能有明显影响.     

金属纳米颗粒对水合物的导热影响

使用分子动力学模拟方法,在温度为200－280K的NVT系综下,对纳米粒子－CO2水合物复合体系进行模拟计算,研究了不同种类（Ag, Cu, Fe）、不同粒径 (1.0nm, 1.5nm, 2.0nm) 的球形纳米粒子对水合物导热性能的影响,从体系构型、导热系数、纳米粒子运动速度等方面探究纳米粒子对水合物导热性能的强化机理。 模拟结果表明,纳米粒子的加入,不影响水合物导热率与温度的相关性;与同温度下纯质CO2体系相比,粒径相同时,Ag、Cu、Fe的复合体系导热增长率分别为25.6%－43.8%、19.4%－31.9%、6.9%－17.6%,纳米Ag导热增强效果最好;对于同一粒子,粒径越小,整体的导热能力越强,粒径1.0nm、1.5nm、2.0nm的复合体系导热增长率分别为28.2%－39.8%、19.4%－31.9%和7.5%－17.1%。     

掺Ag纳米颗粒的BaTiO3复合薄膜的非线性光学特性

通过准分子激光(XeCl,308 nm,20 ns)在MgO(100)单晶衬底上制备了不同掺杂浓度的Ag:BaTiO3纳米复合薄膜,通过X射线衍射和X射线光电子能谱对薄膜的结构和组分进行了表征.在430 nm和470 nm附近观测到了不同浓度Ag纳米颗粒引起的等离子体吸收峰,通过z扫描技术对复合薄膜的三阶非线性光学特性进行了测量,并对其光学非线性的增强机制进行了讨论.     

藻蓝蛋白原位还原Ag（Ⅰ）与纳米Ag（O）形成动态过程的谱学研究

在4℃避光条件下，将藻蓝蛋白（简称PC）与AgNO3作用，通过UV，FS，FTIR等谱学方法研究了PC与Ag（Ⅰ）原位还原与纳米Ag（0）粒子形成的动态过程。结果显示：PC在615nm的特征吸收峰强度明显减弱，并随Ag（Ⅰ）浓度增加和时间延长单调降低；PC的荧光发射峰和荧光激发峰也均呈现衰减趋势。同步荧光光谱观察到纳米Ag（0）粒子形成的动态过程。用TEM观察到所形成的Ag（0）分散于PC表面，形成PC为核，纳米银为壳部分包覆的生物缀合物，粒子呈球形，有较窄的分布尺寸，粒径在15～30nm之间。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.