Spectroscopic and photoluminescence characteristics of Dy ions in lead containing sodium fluoroborate glasses for laser materials

Lead containing calcium zinc sodium fluoroborate (LCZSFB) glasses doped with different concentrations of trivalent dysprosium ions were prepared and investigated by the XRD, FTIR, optical absorption, photoluminescence and decay curve analysis. The experimentally determined oscillator strengths have been determined by measuring the areas under the absorption peaks and the Judd–Ofelt (J–O) intensity parameters were calculated using the least squares fit method. From the evaluated J–O parameters the radiative transition probability rates, radiative lifetimes and branching ratios were calculated for ⁴F_9/2 excited level. Room temperature photoluminescence spectra for different concentrations of Dy³⁺-doped LCZSFB glasses were obtained by exciting the glass samples at 386 nm. The intensity of Dy³⁺ emission spectra increases with increasing concentration of 0.1, 0.25, 0.5 and 1.0 mol% and beyond 1.0 mol% the concentration quenching is observed. The measuring branching ratios are reasonably high for transitions ⁴F_9/2→⁶H_15/2 and ⁶H_13/2, suggesting that the emission at 484 and 576 nm, respectively, can give rise to lasing action in the visible region. From the visible emission spectra, yellow–blue (Y/B) intensity ratios and chromaticity color coordinates were also estimated. The lifetimes of ⁴F_9/2 metastable state for the samples with different concentrations were also measured and discussed.     

Raman analysis of perrhenate and pertechnetate in alkali salts and borosilicate glasses

Sodium borosilicate glasses containing rhenium or technetium were fabricated and their vibrational spectra studied using confocal Raman microscopy. Glass spectra were interpreted relative to new high‐resolution spectra of pure crystalline NaReO₄, KReO₄, NaTcO₄, and KTcO₄ salts. Spectra of perrhenate and pertechnetate glasses exhibited sharp Raman bands, characteristic of crystalline salt species, superimposed on spectral features of the borosilicate matrix. At low concentrations of added KReO₄ or KTcO_4, the characteristic pertechnetate and perrhenate features are weak, whereas at high additions, sharp peaks from crystal field‐splitting and C_4h symmetry dominate glass spectra, clearly indicating ReO₄⁻ or TcO₄⁻ is locally coordinated with K and/or Na. Peaks indicative of both K and Na salts are evident in many Raman spectra, with the Na form being favored at high concentrations of the source chemicals, where more K⁺ is available for ion exchange with Na⁺ from the base glass. The observed ion exchange likely occurred within depolymerized channels where nonbridging oxygens create segregation from the glass network in regions containing anions such as ReO₄⁻ and TcO₄⁻ as well as excess alkali cations. Although this anion exchange provides evidence of chemical mixing in the glass, it does not prove the added salts were homogeneously incorporated in the glass. The susceptibility to ion exchange from the base glass indicates that long‐term immobilization of Tc in borosilicate glass must account for excess charge compensating alkali cations in melt glass formulations. Published 2014. This article is a U. S. Government work and is in the public domain in the USA.     

Maximum-entropy deconvolution applied to electron energy-loss spectroscopy

In the present paper, we investigate the performance of maximum-entropy deconvolution, in removing the instrumental response function from electron energy-loss spectra. To this end we make use of spectra acquired from the carbon K-edge in graphite for a range of signal-to-noise ratios. The zero-loss peak is used as the instrumental profile. The resolution improvement obtained through the application of the deconvolution algorithm as a function of the signal-to-noise ratio is well described by a logarithmic dependency. The claimed resolution improvement is further substantiated by demonstrating the consistency between improvement obtained for the width of the instrumental response function, the width of the π¹ peak and the splitting of the σ¹ peaks for a range of signal-to-noise ratios.     

Frequency-stabilized cavity ring-down spectroscopy measurements of carbon dioxide isotopic ratios

Carbon dioxide (CO₂) isotopic ratios on samples of pure CO₂ were measured in the 1.6 μm wavelength region using the frequency-stabilized cavity ring-down spectroscopy (FS-CRDS) technique. We present CO₂ absorption spectra with peak signal-to-noise ratios as high as 28,000:1. Measured single-spectrum signal-to-noise ratios were as high as 8900:1, 10,000:1, and 1700:1 for ¹³C/¹²C, ¹⁸O/¹⁶O, and ¹⁷O/¹⁶O, respectively. In addition, we demonstrate the importance of utilizing the Galatry line profile in the spectrum analysis. The use of the Voigt line profile, which neglects the observed collisional narrowing, leads to large systematic errors which are transition-dependent and vary with temperature and pressure. While the relatively low intensities of CO₂ transitions near λ=1.6 μm make this spectral region non-optimal, the sensitivity and stability of FS-CRDS enabled measurement precision of pure CO₂ samples which are comparable to those of other optical techniques which operate at far more propitious wavelengths. These results indicate that a FS-CRDS spectrometer designed to probe CO₂ bands near wavelengths of 2.0 μm or 4.3 μm could achieve significantly improved precision over the present instrument and likely be competitive with mass spectrometric methods.     

Local structure analysis of YSZ by Y-89 MAS-NMR

The local coordination structure around Yttrium ions in yttria stabilized zirconia (YSZ) has been investigated by ⁸⁹Y MAS-NMR. The NMR spectrum showed multiple peaks corresponding to yttrium ions in different coordination numbers. The compositional dependence of spectra was observed. Yttrium ions of different oxygen coordination number were quantified. The oxygen vacancy concentration around the cations was determined. It was found that the vacancies were distributed around Zirconium ions in lower Y₂O₃ concentrations, and the vacancy concentration located to Yttrium began increasing at concentrations above 10 mol% Y₂O₃. The local structure change was able to be directly observed by ⁸⁹Y NMR measurements.     

15N-Markierung von Plasmaaminosäuren nach oraler Applikation von [15N]Glycin, [15N]Leucin und [15N]Hefeprotein-Thermitase-Hydrolysat

For the biosynthetic preparation of ¹⁴C-erucic acid (C₂₁H₄₁COOH) by means of rape plants cv. sollux the plants were supplied with ¹⁴CO₂ and additionally fed with ¹⁴C-Sodium acetate after anthesis. After saponification of the extracted lipids the erucic acid was isolated and purified. The substance was identified by gas chromatography. The incorporation of the applied radioactivity (34 MBq ¹⁴CO₂; 37 MBq¹⁴C-natrium acetate) into the fatty acids amounted to 1,2 per cent. The eruric acid could be isolated from the fatty acids mixture with a specific radioactivity of 1,001 MBq/mmol and a purity of 97,2 per cent.     

Anomalous ratios of radioisotopes in PM10 as tracer of global fallout impact in the centre of Mexico

The monitoring and evaluation of radioactive content in samples of PM₁₀ aerosols have been investigated. The specific radioactivity concentrations (SRC) of ²³⁴U, ²³⁵U, ²³⁸U and ²³²Th were determined using inductively coupled plasma-sector field mass spectrometry in 13 samples collected in Mexico City and 8 samples collected in Cuernavaca in the centre of Mexico. The SRC of the radioisotopes analysed in PM₁₀ were larger than those reported in PM_2.5. The enrichment factor was greater than 5, indicating anthropogenic influences in both sites. The activity ratios of these isotopes in the samples were determined. The ²³⁵U/²³⁸U ratio showed variations with respect to the natural value, while the ²³⁴U/²³⁸U and ²³²Th/²³⁸U ratios did not show any secular equilibrium in all sites, corroborating that the increase of uranium is not influenced by natural sources. The annual dose results obtained have no impact on health.     

Structural, optical and thermal investigations on Dy doped NaF–Li2O–B2O3 glasses

Structural, optical and thermal properties of Dy³⁺ doped lithium fluoroborate glasses have been studied for various concentrations of Dy³⁺ from 0.5 to 5 wt%. The XRD studies confirm the amorphous nature of the glasses while the FTIR spectra reveal the presence of BO₃ and BO₄ local structural units. The UV–VIS–NIR absorption studies were carried out to calculate the bonding parameters ( and δ), to identify the ionic/covalent nature of the glasses. The JO parameters, experimental and theoretical oscillator strengths were also determined and reported. The luminescence spectra have been studied to determine the radiative transition probability (A), stimulated emission cross section () and the experimental and calculated branching ratios (β_R) for the excited levels that include ⁴F_9/2→⁶H_11/2, ⁶H_13/2, and ⁶H_15/2 transitions. The variation of optical properties with varying concentrations of dysprosium oxide content in the glasses are reported and discussed. The thermal behavior of Dy³⁺ doped lithium fluoroborate glasses have been reported by recording DSC thermograms.     

The high-resolution spectrum of water vapor between 16500 and 25250 cm−1

High-resolution spectra of water vapor have been recorded, with very good signal-to-noise ratios, between 16500 and 25250 cm^?1 using visible Fourier transform spectroscopy. Precise line positions have been derived, and 1174 vibration-rotation transitions belonging to 23 different bands of H₂O have been assigned, leading to the determination of 539 vibration-rotation energy levels and greatly extending our knowledge of the highly excited vibrational states of the water molecule. The measurement of 630 line intensities with accuracies varying from 5 to 35%, depending on the strength of the line, has been performed.     

不同Tm3＋浓度掺杂碲酸盐玻璃光谱性质研究

制备了70TeO₂-20WO₂-10ZnO-xTm₂O₃系统玻璃，根据所测玻璃的吸收光谱，应用Judd-Ofelt(J-O)理论计算出Tm^3＋离子在碲酸盐玻璃的J-O强度参数、Tm^3＋在玻璃中的自发辐射概率A、荧光分支比β及荧光辐射寿命 τ_R 等各项光谱参数.测定了玻璃的荧光光谱，并计算了Tm^3＋在碲酸盐玻璃中的荧光有效线宽、峰值受激发射截 面.比较了Tm^3＋在不同掺杂浓度下的光谱特性，认为当Tm₂O₃掺杂浓度达到 0.8wt％—1wt%时，所获得的荧光强度与荧光线宽达到最佳值，掺Tm^3＋ 碲酸盐玻璃是一种理想的S波段宽带光纤放大器用基质材料. 关键词： 碲酸盐玻璃 宽带光纤放大器 荧光线宽 荧光峰值发射截面     

The optical properties of Dy-doped NaY(MoO4)2 crystal

The Dy³⁺-doped NaY(MoO₄)₂ single crystals were grown successfully by the Czochralski technique. The main spectroscopic properties (absorption, luminescence, decay curve) of Dy³⁺-doped NaY(MoO₄)₂ have been determined for both the σ and π polarizations. By using the Judd-Ofelt theory, the measured room temperature absorption spectra were applied to determine the intensity parameters, spontaneous transition probabilities, branching ratios, and radiative lifetimes of Dy³⁺ transitions. The results show that the Dy³⁺-doped NaY(MoO₄)₂ crystal may realize the yellow laser operation.     

Luminescence properties of Tb doped and Tm/Tb/Sm co-doped glasses for LED applications

Tb³⁺ ions doped and Tm/Tb/Sm co-doped glasses for light-emitting-diodes (LED) applications have been synthesized by melt quenching method. Their photoluminescence properties were studied by emission and excitation spectra. The ⁵D₃ and ⁵D₄ emission of Tb³⁺ can be varied by adjusting Tb³⁺ concentrations and the compositions of glass matrix. Blue, green and reddish orange emission bands were observed in the emission spectra of Tm/Tb/Sm co-doped glasses. The combination of these emission bands allows the realization of white light when the glasses are excited by near ultraviolet light. In addition, the relative intensity ratios of respective emission lines are dependent on the composition of glasses and the excitation wavelength.     

Sputtering of Ta2O5 by Ar+ ions at energies below 1 keV

The sputtering of anodically formed Ta₂O₅ layers of about 3500 Å thickness has been studied by Sputtered Neutral Mass Spectroscopy (SNMS). For perpendicular bombardment with Ar⁺ ions up to 900 eV the flux of ejected neutral particles is found to consist almost exclusively of metal atoms Ta and Oxide specific molecules TaO and TaO₂ with intensity ratios in the order 1 : 1 : 10^?1. From depth profiling measurements with SNMS, and from the intensity ratios in the SNMS spectra the total sputtering yield of Ta₂O₅ and the partial yields of Ta, TaO and of oxygen have been determined for normally incident Ar⁺ ions of 100 to 600 eV. After an initial increase the TaO intensity in the SNMS spectra remains constant during the sputter removal of the whole layer. A simple model is derived by which the preferred emission of TaO molecules, and the initial increase of the TaO intensity is referred to ion induced variations of the surface stoichiometry of Ta₂O₅. For optimum TaO production the model predicts equal atomic surface concentrations of Ta and O.     

表面活性剂SDS/TX-100混合体系的NMR研究

用NMR测量了不同比例的SDS/TX-100混合溶液中质子化学位移,结合表面活性剂溶液的两态交换模型,分析了质子化学位移随浓度的变化趋势, 求出了不同比例混合溶液中两种表面活性剂各自的临界胶束浓度及混合胶束的临界胶束浓度. 依据理想混合溶液理论,预测了混合胶束的临界胶束浓度,计算了溶液中SDS与TX-100之间的相互作用参数和SDS在混合胶束中的摩尔分数. 根据所得参数讨论了混合胶束的形成过程. 利用文中和文献中混合体系的实验数据验证了协同作用理论改进前后的适用性,表明改进后的协同作用理论完善一些.     

An investigation on visible luminescence of Ho activated LBTAF glasses

Different concentrations of Ho³⁺-doped lead borate titanate aluminum fluoride (LBTAFHo) glasses with chemical composition of PbO-H₃BO₃-TiO₂-AlF₃-Ho₂O₃ were prepared by the melt quenching method. The spectral properties were investigated using the absorption, emission and decay measurements. The experimental oscillator strengths were calculated from the area under the absorption bands. Applying Judd-Ofelt theory, the intensity parameters (Ω_{λ=2, 4, 6}) were calculated, by the least square fit approach from which the radiative transition rates, luminescence branching ratios and radiative decay times were determined. The photoluminescence spectra revealed the quenching of luminescence intensity beyond 1.0 mol% of Ho³⁺ ion concentration. To investigate the luminescence potentiality of ⁵F₄→⁵I₈ emission level, the effective bandwidth and the stimulated emission cross-section were determined. The quenching in experimental decay time is attributed to the resonance energy transfer among the excited Ho³⁺ ions.     

Copper and native defects in zinc telluride

Zinc telluride crystals were grown from tellurium-rich solutions containing 10¹⁷–10²⁰ cm^?3 atoms of copper. The copper concentrations in these crystals were measured by activation analysis. Hall effect and resistivity measurements were performed. Photoluminescence spectra were also determined. Our interpretation of the different results is that copper brings about both acceptor defects Cu_Zn with a 0·12–0·13 eV ionization energy, and donor defects. The second acceptor level of the zinc vacancy was found to be at 0·15 eV.     

Photoluminescence of SrGa2S4:Sn,Re(=Ce, Gd) phosphors

The photoluminescence (PL) spectra, PL excitation spectra, color coordinates, and X-ray diffraction spectra are reported for SrGa₂S₄:Sn,Re(=Ce and Gd, respectively) phosphors. By mixing SrGa₂S₄:Sn,Ce phosphors with different Ce³⁺ concentrations, white emissions can be obtained under the excitation of a 340-nm UV LED. Emissions in the green to yellow color range can be obtained from SrGa₂S₄:Sn,Gd phosphors. The rare earth ions enhance the green emission band, which peaks at 534 nm, instead of the yellow one. The origin of this enhancement is discussed. The resonant energy transfer rates are estimated in the cases from Ce³⁺ to the green and yellow centers of Sn²⁺ and between the yellow centers and the green centers.     

Accurate intensity calibration for low wavenumber (−150 to 150 cm−1) Raman spectroscopy using the pure rotational spectrum of N2

We report on an accurate intensity calibration method for low wavenumber Raman spectroscopy. It uses the rotational Raman spectrum of N₂. The intensity distributions in the rotational Raman spectra of diatomic molecules are theoretically well established. They can be used as primary intensity standards for intensity calibration. The intensity ratios of the Stokes and anti‐Stokes transitions originating from the same rotational levels are not affected by thermal population. Taking the effect of rotation–vibration interactions appropriately into account, we are able to calculate these intensity ratios theoretically. The comparison between the observed and calculated ratios of the N₂ pure rotational spectrum provides an accurate relative sensitivity curve (error ~5 × 10⁻⁴) in the wavenumber region of −150 to 150 cm⁻¹. We determine the temperature of water solely from the low wavenumber Raman spectra, using a thus calibrated spectrometer. The Raman temperature shows an excellent agreement with the thermocouple temperature, with only 0.5 K difference. The present calibration technique will be highly useful in many applications of low wavenumber quantitative Raman spectroscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Judd-Ofelt analysis and near infrared emission properties of the Er ions in tellurite glasses containing WO3 and CdO

The influence of erbium (Er³⁺) ion concentration on the infrared emission at 1.5 μm in TeO₂-WO₃ and TeO₂-CdO-WO₃ glasses was studied. The samples were prepared by conventional melt quenching method. The optical properties were studied by measuring the absorption and luminescence spectra at room temperature. The Judd-Ofelt parameters (Ω_t), transition probabilities, branching ratios of various transitions and their radiative lifetimes were calculated from the optical absorption spectra. Absorption and emission cross-section spectra and the Stark Levels splitting for the ⁴I_13/2 to ⁴I_15/2 transition of Er³⁺ centered at 1.5 μm were determined.