Four-center type photopolymerization in the solid state. IV. Polymerization of α,α′-dicyano-p-benzenediacrylic acid its derivatives

The solid-state photopolymerization of α,α′-dicyano-p-benzene diacrylic acid (p-CBA) series has been studied. p-CBA, its esters, amide, and a few other cyano derivatives were prepared and new polymers were obtained from p-CBA alkyl esters on irradiation of ultraviolet or visible light. Though the polymerization behavior differs with each monomer, polymerization proceeds in essentially the same manner as in the 2,5-distyrylpyrazine (DSP) and p-benzenediacrylic acid (BDA) series: the reaction proceeds topochemically forming polymer with a cyclobutane ring in the main chain. Properties of high polymer are typical of cyclobutane-containing polymer. That is, they are highly crystalline with high melting temperature and a limited solubility. The study on this series of compounds, as well as the DSP and p-BDA series, supports the generalization that solid-state dimerization can be extended to solid-state photopolymerization of compound having two dimerizable units in a molecule.     

Four-center type photopolymerization in the solid state. III. Polymerization of phenylene diacrylic acid and its derivatives

The solid-state photopolymerization of phenylene diacrylic acid (PDA) and its derivatives was studied as an application of solid-state photodimerization of cinnamic acid to photopolymerization of corresponding bifunctional molecule which has two cinnamic units in a single molecule. p- and m-PDA, and their esters and amides were prepared and investigated with respect to their photopolymerizability. Many of them have been found to polymerize into linear high polymers with the cyclobutane rings in the main chain on irradiation by ultraviolet or visible light. The polymerization process, the structure of the polymers, and their general properties were investigated in several ways. All the polymers are very similar to poly-2,5-distyrylpyrazine and poly-1,4-bis(β-pyridyl-2-vinyl) benzene with respect to their polymerization behavior, polymer structure, and some polymer properties: these polymers are soluble in a limited number of solvents, they have a high melting point and an extremely high crystallinity. On the basis of chemical behavior of poly-PDA and its phenyl ester the possible steric configurations of these polymers are discussed. It is demonstrated for the PDA series that solid-state dimerization can be generally extended to solid-state photopolymerization of the compound having two dimerizable units in a single molecule, although the crystal structure renders polymerization impossible in certain cases.     

Four-center type photopolymerization in the solid state. II. Polymerization mechanism of 2,5-distyrylpyrazine

The polymerization mechanism of trans,trans-2,5-distyrylpyrazine (DSP) has been investigated and some crystal changes along with the polymerization process have been observed through polarizing microscope and x-ray diffraction pattern. Information has been obtained on the active species, polymerization reaction type, and other factors such as light intensity, reaction temperature, or crystalline state. The polymerization of DSP occurs only in the solid state by photoirradiation. Reduced viscosity increases gradually with the increase of conversion and increases sharply above 80% conversion. Polymerization rate increases with the increase of light intensity and temperature. On the other hand, reduced viscosity decreases with the increase of temperature but does not depend on light intensity within the range investigated. The polymer obtained at low conversion as well as at high conversion has high crystallinity, and the direction of polymer axes is simply related to that of monomer crystal. It was concluded that the four-center type polymerization of DSP proceeds topochemically by a photochemically induced stepwise mechanism.     

Four-center type photopolymerization in the solid state. I. Polymerization of 2,5-distyrylpyrazine and related compounds

Crystalline 2,5-distyrylpyrazine (DSP) was found to polymerize into a linear high polymer with extremely high crystallinity by the action of sunlight or ultraviolet light. Based on this discovery, photopolymerizability of the related diolefins having the general formula, trans,trans-Ar′? CH?CH? Ar? CH?CH? Ar′ was surveyed. As a result, 1,4-bis[β-pyridyl-(2)-vinyl]benzene (P2VB) was found to polymerize in the same way as DSP. The polymers as polymerized, showed a high melting temperature (>330°C) and were soluble only in strong acids. The structure of the polymers was investigated by means of several customary methods involving infrared and NMR spectrum studies. It was concluded that both poly-DSP and poly-P2VB consist of a linear structure having a recurring cyclobutane ring in the main chain. General properties of this novel polymer were studied.     

Resonance Raman spectra of metalloporphyrins. On the methine-bridge vibrations of ferric octaethylporphyrins and its α′, β′, γ′, and δ′ deutero derivatives

Raman spectra of Fe³⁺ and Pd²⁺ octaethylporphyrin (OEP) and their α′, β′, γ′, and δ′ deutero derivatives were measured with the 5145, 4880 and 4765 Å lines of an Ar ion laser. Raman bands due to methine-bridge stretching vibrations were assigned and their vibrational amplitudes were calculated from the observed frequency shifts on deuterium substitution of methine-bridge hydrogens. These vibrations correspond to the spin-state sensitive Raman bands of heme proteins. On the basis of symmetry considerations and the observed polarizations, vibrational assignments of other Raman bands were made.     

Four-center type photopolymerization in the solid state. VII. Photochemical reaction of m-phenylene diacrylic acid dimethyl ester

The photochemical reaction of m-phenylene diacrylic acid dimethyl ester (m-PDA Me) crystals and solutions has been studied to clarify the effects of the molecular shape on four-center type photopolymerization of diolefins. On irradiation, m-PDA Me crystals were converted into amorphous oligomers having more than two kinds of cyclobutane rings with respect to steric configuration. The characteristic oligomer formation is explained by considering a two-step mechanism: topochemical dimer formation in an ordered crystal lattice and subsequent random cycloaddition in a disordered crystal lattice. In m-PDA Me solution, reversible cyclobutane ring formation and cis–trans isomerization take place, depending on the concentration of m-PDA Me in solution and the wavelength of the irradiating light. The multiplicity of reactivity in various states has been established.     

Solid-state photopolymerization of α,α′-bis(4-acetoxy-3-methoxybenzylidene)-p-benzenediacetonitrile

One crystalline form of α,α′-bis(4-acetoxy-3-methoxybenzylidene)-p-benzenediacetonitrile is photopolymerized by a four-center reaction to give a polymer containing alternating benzene and cyclobutane rings. The polymer is highly crystalline and insoluble in most solvents. Location of groups around the cyclobutane ring is deduced from the products obtained on thermal decomposition. Chain contained benzene rings are located in positions 1 and 3; aromatic groups alternate sides of the cyclobutane ring. Special characterization and quantum yield of the polymerization are reported, as well as polymer solution viscosity and alkaline depolymerization of the polymer.     

Carbon Magnetic Resonance Spectra of α, β, γ, δ- and α, β, α′, β′- Unsaturated Ketones

Carbon-13 spectra of a series of 26 unsaturated ketones (ortho- and para-cyclo-hexadienones and corresponding open-chain analogues) have been measured by Fourier-transform. Pulse spectroscopy. A complete analysis has been achieved by means of double resonance experiments using noise-modulated and coherent off-resonance proton irradiation and with the aid of non-decoupled spectra. Chemical shifts are interpreted in terms of charge distribution in the dienone system and of methyl substituent effects. Carbon chemical shifts were also obtained for O-protonated ortho- and para-cyclohexadienones. One-bond and long-range carbon-proton and carbon-fluorine spin coupling constants are reported for several compounds.     

Polyesters from α,α′-dicarbomethoxy-α,α′-diphenyl-p-xylylene and the synthesis and properties of a new quinodimethane

A film forming polyester was obtained from the title compound and 1,4-butanediol. In addition oxidation of the title compound gave rise to 7,8-dicarbomethoxy-7,8-diphenylquinodimethane as a mixture of Z and E isomers. The ¹H-NMR and the electronic characterization of this polymer are discussed. The quinodimethane will undergo 1,6-nucleophilic addition to form an aromatic compound.     

Effect of tin tetrachloride on thermal decompositions of α,α′-azobisisobutyronitrile and dimethyl α,α′-azobisisobutyrate

Thermal decomposition of α,α′-azobisisobutyronitrile (AIBN) and dimethyl α,α′-azobisisobutyrate (MAIB) in the presence of a large amount of tin tetrachloride was investigated to determine the effect of complex formation on the decomposition rates and yields of the recombination products. The addition of tin tetrachloride significantly increased the decomposition rates; the observed first-order rate constant increased by factors of 4.5 and 17 at molar ratios of [SnCl₄]/[AIBN] = 21.65 and [SnCl₄]/[MAIB] = 19.53, respectively. It was found that the decomposition of these azo compounds was also accelerated by the addition of a comparable amount of donor solvent such as ethyl acetate or propionitrile to tin tetrachloride and that the enhancement in rate was accounted for by a larger frequency factor in the Arrhenius equation. Furthermore, the addition of tin tetrachloride seemed to suppress the formation of recombination products, tetramethyl succinonitrile and dimethyl tetramethylsuccinate, of the radicals produced by decomposition.     

Polyesters,polycarbonate, and polyurethanes from a novel monomer: α,α,α′,α′-tetramethyl-1,4-tetrafluorobenzenedimethanol

The novel diol monomer, α,α,α′,α′-tetramethyl-1,4-tetrafluorobenzenedimethanol, has been synthesized by a convenient route which involves the addition of acetone to 1,4-dilithiotetrafluorobenzene and can be purified by washing with hexanes. It does not directly undergo condensation polymerizations with diacid chlorides. Its disodium salt, prepared by its reaction with sodium hydride, similarly fails to undergo such polymerizations readily. However, the dilithium salt, prepared in situ by the reaction of the title diol with 2 equiv of n-butyllithium in tetrahydrofuran, is suitable for the preparation of various classes of condensation polymers. Four polyesters and one polycarbonate derived from the reactions of the dilithium salt of the diol with adipoly dichloride, sebacoyl dichloride, isophthaloyl dichloride, terephthaloyl dichloride, and phosgene and two polyurethanes derived from its reactions with tolylene-2,4-diisocyanate and methylene-di-1,4-phenyl diisocyanate were prepared. Each was fully characterized by GPC, NMR, IR, and UV-visible spectroscopies, and the results of these studies are reported herein. © 1993 John Wiley & Sons, Inc.     

Polymerization of N-carboxy-amino acid anhydrides in the solid state. I. Polymerizability of the various α-amino acid NCAs in the solid state

The solid-state polymerization of various α-amino acid NCAs was investigated and the results were compared with those obtained by heterogeneous polymerization in acetonitrile. Essential differences were found in the polymerizability of the NCAs in these two systems. In the solid state, L-leucine NCA was the most reactive among the NCAs examined, and its reactivity was even higher than in the precipitation polymerization of acetonitrile solutions. On the other hand, glycine NCA was the most inert among the NCAs examined in the solid state. The difference between the reactivities of glycine NCA and L-alanine NCA was interpreted in terms of their crystal structures. Several kinetic features of the solid-state polymerization were studied on γ-benzyl-L -glutamate NCA.     

Synthesis of novel α,α′,β-trisubstituted β-lactones

A concise and efficient synthesis of α,α′,β-trisubstituted β-lactones is presented. These novel lactones are easily obtained in five steps and will be dedicated to anionic ring opening polymerization.     

Mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones and their derivatives

The mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones (compounds 1) and their 2,4-dinitrophenylhydrazones (compounds 2) and semicarbazones (compounds 3) have been studied. The characteristic fragments at m/z (M ? 73) from compounds 1, m/z (M ? 253) from compounds 2 and m/z (M ? 130) from compounds 3 are abundant and proposed to be [ArCROCH₃]⁺. Fragmentations yielding [M⁺ ? 49] from compounds 2 are abnormal and probably involve the methoxyl and nitro groups. The intense peak at m/z 130 due to [CH₃OCH₂CNNHCONH₂]⁺ from compounds 3 corresponds to α-cleavage of the molecular ion. Some other fragments from these new compounds are interpreted in this paper.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

Nonreductive Enantioselective Ring Opening of N-(Methylsulfonyl)dicarboximides with Diisopropoxytitanium α,α,α′,α′-Tetraaryl-1,3-dioxolane-4,5-dimethanolate

The bicyclic and tricyclic meso-N-(methylsulfonyl)dicarboximides 1a–f are converted enantioselectively to isopropyl [(sulfonamido)carbonyl]-carboxylates 2a–f by diisopropoxytitanium TADDOLate (75–92% yield; see Scheme 3). The enantiomer ratios of the products are between 86:14 and 97:3, and recrystallization from CH₂Cl₂/hexane leads to enantiomerically pure sulfonamido esters 2 (Scheme 3). The enantioselectivity shows a linear relationship with the enantiomer excess of the TADDOL employed (Fig.3). Reduction of the ester and carboxamide groups (LiAlH₄) and additional reductive cleavage of the sulfonamido group (Red-Al) in the products 2 of imide-ring opening gives hydroxy-sulfonamides 3 and amino alcohols 4 , respectively (Scheme 4). The absolute configuration of the sulfonamido esters 2 is determined by chemical correlation (with 2a,b ; Scheme 6), by the X-ray analysis of the camphanate of 3e (Fig. 1), and by comparative ¹⁹F-NMR analysis of the Mosher esters of the hydroxy-sulfonamides 3 (Table 1). A general proposal for the assignment of the absolute configuration of primary alcohols and amines of Formula HXCH₂CHR¹R², X = O, NH, is suggested (see 11 in Table 1). It follows from the assignment of configuration of 2 that the Re carbonyl group of the original imide 1 is converted to an isopropyl ester group. This result is compatible with a rule previously put forward for the stereochemical course of reactions involving titanium TADDOLate activated chelating electrophiles ( 12 in Scheme 7). A tentative mechanistic model is proposed ( 13 and 14 in Scheme 7).