Free-radical homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate in tetrahydrofuran

Ethyl α-hydroxymethylacrylate (EHMA) was polymerized in a 3 mol/L tetrahydrofuran solution at 50°C, using 2–2' azobisisobutyronitrile as initiator. The kinetic behavior indicates a higher polymerization rate for EHMA than for methyl methacrylate (MMA). Copolymerization reaction between MMA and EHMA, under the same experimental conditions, was carried out and values of r_MMA = 1.264 and r_EHMA = 1.285 were found for the reactivity ratios. The comparison of triad sequences as determined from Bernouillian statistic to those calculated from the experimental spliting of O-methyl and α-methyl ¹H-NMR signals of the copolymers confirm the obtained results. © 1992 John Wiley & Sons, Inc.     

Radical-Initiated homopolymerization and copolymerization of methylthiomethyl methacrylate

Methylthiomethyl methacrylate (MtMA) was synthesized and homopolymerized in solution. The poly(MtMA) is readily soluble in benzene, acetone, tetrahydrofuran, and methylene chloride at room temperature. The values of K and a in the Mark–Houwink equation, [η] = KM^a, were found to be K = 2.88 × 10^–5 and a = 0.75 when M = M_w. The glass transition temperature of poly(MtMA) was observed to be 72°C by thermomechanical analysis. Intramolecular anhydride formation occurred when poly(MtMA) was heated to 250–300°C. The kinetics of MtMA homopolymerization was investigated in benzene, using azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.5[MtMA]^1.05 and the overall activation energy was calculated to be 75.7 kJ/mol. The relative reactivity ratios of MtMA in styrene copolymerizations (r₁ = 0.33, r₂ = 0.55) were obtained. Applying the Q-e scheme led to Q = 1.07 and e = 0.51 for MtMA.     

Free-radical copolymerization of 9-vinylanthracene

Free-radical copolymerization of methyl acrylate, ethyl acrylate, butyl acrylate, and methyl methacrylate with 9-vinylanthracene was studied, and the reactivity ratios r ₁ and r₂ were calculated. In the light of earlier data on copolymerization of 9-vinylanthracene with styrene results show that the difference in polarity of the monomers participating in the copolymerization has an insignificant influence compared with that of the steric factors involved in the reaction.     

Photoinitiated homopolymerization and copolymerization of furfuryl methacrylate and N-vinylpyrrolidone

The study of the homo- and copolymerization of furfuryl methacrylate ( F ) and vinylpyrrolidone ( P ) in bulk, initiated by the photoactivation of AIBN at low temperatures (0 and 40°C), is described. The kinetic diagrams for the homopolymerization of F and P were obtained following the evolution of the heat of reaction by DSC, and revealed the autoacceleration and the vitrification effects on the polymerization rate. The influence of oxygen in the photoinitiated polymerization was analyzed by determining the steady-state concentration of oxygen from the kinetic data obtained for polymerizations performed out in the presence and absence of oxygen. The results obtained indicate that P is more sensitive than F to the presence of oxygen in free radical polymerization. The photoinitiated copolymerization process is little affected by the concentration of monomers, giving similar R_p and θ_m values for both systems. However, at low polymerization temperature 0°C non-crosslinked copolymers are obtained, whereas at a temperature of 40°C, the copolymers prepared at conversion higher than 20 mol % become crosslinked as a result of the active participation of the furfuryl ring in the polymerization process at this temperature. © 1996 John Wiley & Sons, Inc.     

2-Arylazo-1-vinylpyrroles: Free-radical polymerization and copolymerization

2-Arylazo-1-vinylpyrroles (a new group of azo dyes of the pyrrole series) are polymerized under heating (80°C) without initiators and in the presence of AIBN to form intensely colored paramagnetic and conducting polymers with a yield of 92%. By the example of the thermal copolymerization with 1-vinylpyrrolidone, it has been shown that 2-arylazo-1-vinylpyrroles may simultaneously play the roles of initiators and comonomers.     

Radical-initiated homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate

Ethyl α-hydroxymethylacrylate (EHMA) was synthesized and homopolymerized in bulk and in solution. The poly(EHMA) is readily soluble in alcohol, acetone, tetrahydrofuran, and methylene chloride at room temperature. Intramolecular lactone formation occurred when poly(EHMA) was heated to 180–230°C. The kinetics of EHMA homopolymerization was investigated in ethyl acetate, using α,α′-azobisisobutylonitrile as an initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.50[EHMA]^1.4 and the overall activation energy was calculated as 71.9 kJ/mol. Kinetic constants for EHMA polymerization were obtained as follows: k_p/k = 0.17L^0.9mol^?0.9s^?0.5; 2fk_d = 1.5 × 10^?5 s^?1. The relative reactivity ratios of EHMA(M₂) copolymerization with styrene (r₁ = 0.472, r₂ = 0.564) in ethyl acetate were obtained. Applying the Q-e scheme led to Q = 0.84 and e = 0.35 for EHMA.     

Free-radical copolymerization of styrene with N-phenyl maleimide initiated by thiol

2-Methyl–2-undecanethiol was found efficient to initiate the free-radical copolymerization of styrene (St) with N-phenyl maleimide (NPMI) at 40°C. The initial copolymerization rate increases with the increasing of thiol concentration at first, then keeps constant with the further increasing of the thiol concentration. The charge-transfer complex (CTC) formed between St and NPMI was investigated in different solvents by using ¹H-NMR. There is no definite correlation between CTC equilibrium constant, K, and the polarity of the solvent. With the increasing of CTC concentration, both the copolymerization rate and NPMI content in copolymer enhances, indicating the participation of CTC in both initiation and propagation. The monomer reactivity ratios were calculated to be r_NPMI = 0.052 and r_St ? 0.166, showing an alternating tendency for the copolymerization of St with NPMI. The molecular weight approach has shown again the effect of CTC. The function of thiol as a regulator is mitigated due to the involvement of CTC. © 1992 John Wiley & Sons, Inc.     

Markovian approach to nonlinear polymer formation: Free-radical crosslinking copolymerization

A Markovian model is used to extend the Flory/Stockmayer gelation theory to nonequilibrium reaction systems, by taking free-radical crosslinking copolymerization of vinyl and divinyl monomer as an example. Free-radical polymerizations are kinetically controlled; therefore, each primary polymer molecule experiences a different history of crosslinked structure formation. By assuming that the primary chains with identical birth time conform to the same chain connection probabilities, the nonlinear structural development can be viewed as a system in which the primary chains formed at different birth times are combined into nonlinear polymers in accordance with the first-order Markov chain statistics. According to the present Markovian model, the weight-average chain length, P̄_w is given by a matrix formula, P̄_w = W _p( E — Q )⁻¹ l where W _p is the row vector that concerns the weight contribution of a primary chain, E is a unit matrix, Q is the transition matrix representing the chain connection statistics, and I is a column vector whose elements are all unity. For an equilibrium system, W _p = P̄_wp (weight-average chain length of the primary chains), E = 1, Q = ρP̄_wp (ρ is the crosslinking density), and I = 1; therefore, the present formula reduces to the Flory/Stockmayer equation, P̄_w = P̄_wp/(1 − ρP̄_wp). The criterion for the onset of gelation is simply stated as a point at which the largest eigenvalue of the transition matrix Q reaches unity, i.e., det( E − Q ) = 0. The present Markovian approach elucidates important characteristics of the kinetically controlled network formation, and provides greater insight into nonequilibrium gelling systems.     

Selective dimerization,oligomerization, homopolymerization and copolymerization of olefins with complex organometallic catalysts

Review embarrasses the problems of low molecular weight olefins (ethylene and propylene) selective oligomerization to butene-1, hexene-1, octene-1, 4-methylpentene-1; selective polymerization of olefins to obtain polymers with a given molecular mass, molecular mass distribution, branching (for the polyethylene), chain structure [atactic, iso-, syndio-, gemiisotactic, stereoblock type and containing terminal vinyl and vinylidene bonds (for polypropylene)]; “live” homo-and copolymerization of olefins, and alternating copolymerization of olefins in the presence of complex organometallic catalysts.     

Bimetallic catalysis for styrene homopolymerization and ethylene-styrene copolymerization. Exceptional comonomer selectivity and insertion regiochemistry

This communication reports the styrene homopolymerization behavior and ethylene-styrene copolymerization behavior of the covalently linked bimetallic constrained geometry catalyst (mu-CH2CH2-3,3'){(eta5-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 (Ti2), which is the first single-site catalyst that effects not only styrene homopolymerization with high activity, but also efficient ethylene-styrene copolymerization over a broad styrene composition range (0-76% at 20 degrees C, 1.0 atm ethylene pressure). In styrene homopolymerization, a 50x increase in polymerization activity is achieved with Ti2 vs the mononuclear analogue, Ti1, using an identical trityl borate cocatalyst and polymerization conditions. In ethylene + styrene copolymerization, Ti2 enchains approximately 20% more styrene than Ti1 under identical reaction conditions. 13C NMR spectroscopy indicates that greater than two consecutive styrene units are enchained in the copolymer backbone produced by Ti2 + Ph3C+B(C6F5)4-. End group analysis of the styrene homopolymer produced by Ti2 + Ph3C+B(C6F5)4- suggests that 1,2-regiochemistry is installed in approximately 50% of the initiation steps. This unusual microstructure is believed to be related to the bimetallic catalyst structure.     

In situ ethylene homopolymerization and copolymerization catalyzed by zirconocene catalysts entrapped inside functionalized montmorillonite

Ethylene homopolymerizations and copolymerizations were catalyzed by zirconocene catalysts entrapped inside functionalized montmorillonites that had been rendered organophilic via the ion exchange of the interlamellar cations of layered montmorillonite with hydrochlorides of L ‐amino acids (AAH⁺Cl^?) or their methyl esters (MeAAH⁺Cl^?), with or without the further addition of hexadecyltrimethylammonium bromide (C₁₆H₃₃N⁺Me₃Br^?; R₄N⁺Br^?). In contrast to the homogeneous Cp₂ZrCl₂/methylaluminoxane catalyst for ethylene homopolymerizations and copolymerizations with 1‐octene, the intercalated Cp₂ZrCl₂ activated by methylaluminoxane for ethylene homopolymerizations and copolymerizations with 1‐octene proved to be more effective in the synthesis of polyethylenes with controlled molecular weights, chemical compositions and structures, and properties, including the bulk density. The effects of the properties of the organic guests on the preparation and catalytic performance of the intercalated zirconocene catalysts were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2187–2196, 2003     

A semiempirical quantum mechanical study of cationically catalyzed homopolymerization and copolymerization of vinyl ethers and epoxides

The purpose of this study was to use the semiempirical quantum mechanical computational method, AM1, to investigate vinyl ether cationic homopolymerization, epoxide homopolymerization, and copolymerization of selected vinyl ethers with a model epoxide (cyclohexene oxide). Homopolymerization studies of 19 vinyl ethers showed that activation enthalpies ranged between 0.0 and 15 kcal/mol, and that the enthalpies of reaction for homopolymerization were nearly all exothermic. Homopolymerization of three epoxides predicted low activation enthalpies, some of which were virtually activationless. All ring-opening epoxide polymerizations were exothermic. Copolymerization of three vinyl ethers with cyclohexene oxide gave activation enthalpies that varied between 2.7 and 4.0 kcal/mol, and the enthalpies of reaction for copolymerization were all exothermic.