KGd(MoO4)2:Eu as a promising red phosphor for light-emitting diode application

A red phosphor KGd(MoO₄)₂:Eu³⁺ was prepared by solid-state reaction technique at high temperature. Its photoluminescent property was investigated and the optimum concentration of Eu³⁺ doped in the KGd(MoO₄)₂ is 25 mol%. Compared with Y₂O₂S:0.05Eu³⁺, the obtained KGd(MoO₄)₂:Eu³⁺ shows wider excitation band around 400 nm, higher intensity of Eu^{3+ 5}D₀–⁷F₂ emission upon excitation 393 nm, and the CIE chromaticity coordinates (x = 0.655, y = 0.345) are closer to the standard of National Television Standard Committee (NTSC). The optical properties of KGd(MoO₄)₂:Eu³⁺ suggest that it is an efficient red-emitting phosphor for light-emitting diode applications.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Synthesis and luminescence properties of Na2Ba2Si2O7:Eu2+ phosphor

Green-emitting phosphor Na₂Ba₂Si₂O₇:Eu²⁺ has been synthesized by a conventional high-temperature solid-state reaction. The phase structure and luminescence properties are characterized by the X-ray powder diffraction, diffuse reflectance spectra, photoluminescence excitation and emission spectra, temperature-dependent emission spectra, respectively. It can be efficiently excited in the wavelength range of 325–400 nm and consists of a strong broad green band centered at about 501 nm, which is ascribed to 4f⁶6s⁰5d¹ → 4f⁷6s²5d⁰ transition of Eu²⁺. The critical quenching concentration of Eu²⁺ in the Na₂Ba₂Si₂O₇ host is about 0.8 mol % and corresponding quenching behavior is ascribed to be electric dipole–dipole interaction. Furthermore, the phosphor has good thermal stability property, and the activation energy for thermal quenching is calculated as 0.34 eV.     

Photoluminescence characterization of a novel red-emitting phosphor In2(MoO4)3:Eu3+ for white light emitting diodes

The red-emitting phosphor In₂(MoO₄)₃:Eu³⁺ with cubic crystal structure was synthesized by a conventional solid-state reaction technique and its photoluminescence properties were investigated. The prepared phosphor can be efficiently excited by ultraviolet (395 nm) and blue (466 nm) light. The emission spectra of the phosphor manifest intensive red-emitting lines at 612 nm due to the electric dipole ⁵D₀→⁷F₂ transitions of Eu³⁺. The chromaticity coordinates of x=0.63, y=0.35 (λ_ex=395 nm) and x=0.60, y=0.38 (λ_ex=466 nm) are close to the standard of National Television Standard Committee values (NTSC) values. The concentration quenching of In₂(MoO₄)₃:Eu³⁺ is 40 mol% and the concentration self-quenching mechanism under 466 nm excitation was the dd intereaction. As a result of the strong emission intensity and good excitation, the phosphor In₂(MoO₄)₃:Eu³⁺ is regarded as a promising red-emitting conversion material for white LEDs.     

NaLa(MoO4)2∶Eu3+的水热调控合成与发光特性研究

采用水热法合成了不同粒径的NaLa(MoO₄)₂∶Eu³⁺微晶.通过调节乙二醇浓度和反应时间,研究了NaLa(MoO₄)₂∶Eu³⁺微晶的形貌演变过程,在水热条件下180 ℃反应16 h获得了均一梭子形NaLa(MoO₄)₂∶Eu³⁺微晶,其晶粒长度约为2.0 μm.荧光光谱分析表明,Eu³⁺取代了NaLa(MoO₄)₂中La³⁺的格位, Eu³⁺在613 nm处红光发射(⁵D₀–⁷F₂跃迁)的浓度猝灭机理是电偶极-电四极相互作用,并发生了Eu³⁺( ⁵D₁ ) + Eu³⁺(⁷F₀ )→ Eu³⁺( ⁵D₀ ) + Eu³⁺(⁷F₃) 交叉弛豫,由此导致浓度猝灭. 关键词： 钼酸盐 水热法 稀土离子 发光     

Photoluminescence properties of a new Eu2+-activated CaLaGa3S7 yellowish-green phosphor for white LED applications

A thiogallate chalcogenide phosphor CaLaGa₃S₇:Eu²⁺ was synthesized by a solid-state reaction at 950 °C in a H₂S atmosphere. The photoluminescence excitation,emission spectra, concentration quenching, fluorescence lifetime, and thermal quenching process of the phosphor were investigated in detail. It was found that the synthesized phosphor emitted intense and broadband yellowish-green light with a peak at 554 nm. Thus, the proposed phosphor is suitable for the development of blue or near UV LED. The critical dopant concentration of Eu²⁺ (R_c=15 Å) per unit formula was found to be 0.15 mol. At room temperature, the fluorescence lifetime of Eu²⁺ in CaLaGa₃S₇ was found to be 0.216 μs. The activation energy for thermal quenching was 0.29 eV. The chromaticity coordinates of our phosphor is very close in color to Y₃Al₅O₁₂:Ce³⁺. Therefore, CaLaGa₃S₇:Eu²⁺ can be a good alternative as a yellowish-green phosphor and can be used for white light generation in phosphor-converted LEDs.     

Synthesis and luminescence properties of green phosphors Ca6Sr4(Si2O7)3Cl2:Eu2+ for white light emitting diodes

Divalent europium-activated chlorosilicate Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphors were synthesized by a conventional solid-state reaction under reductive atmosphere. These phosphors can be efficiently excited by UV–visible light from 320 to 420 nm, which matches that of a near UV-emitting InGaN chip. Under the 360 nm excitation, Ca₆Sr_3.97(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor shows a strong and broad emission centering at 515 nm, which is attributed to the 5d→4f transition of Eu²⁺ ion. The mechanism of concentration quenching was determined to be the dipole–dipole interaction and the critical energy-transfer distance of Eu²⁺ was calculated as 3.31 nm. The CIE chromaticity coordinates of Ca₆Sr_3.96(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor are (0.127, 0.770) according to the emission spectrum. It can be expected that Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphor is a promising candidate as the green component for near-ultraviolet InGaN-based white LED.     

Ionic liquid-assisted hydrothermal synthesis of dendrite-like NaY(MoO4)2:Tb phosphor

Micro-sized NaY(MoO₄)₂:Tb³⁺ phosphors with dendritic morphology was synthesized by a ionic liquid-assisted hydrothermal process. X-ray diffraction (XRD) indicated that the as-prepared product is pure tetragonal phase of NaY(MoO₄)₂. Field emission scanning electron microscopy (FE-SEM) images showed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors have dendritic morphology. The photoluminescent (PL) spectra displayed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors show a stronger green emission with main emission wavelength 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, and the optimal Tb³⁺ doping concentration for obtaining maximum emission intensity was confirmed to be 10 mol%. Based on Van Uitert's and Dexter's models the electric dipole–dipole (D–D) interaction was confirmed to be responsible for the concentration quenching of ⁵D₄ fluorescence of Tb³⁺ in the NaY(MoO₄)₂:Tb³⁺ phosphors. The intrinsic radiative transition lifetime of ⁵D₄ level is found to be 0.703 ms.     

Concentration quenching of Eu2+ in a thermal-stable yellow phosphor Ca2BO3Cl:Eu2+ for LED application

A piece-shaped phosphor Ca₂BO₃Cl: Eu²⁺ was synthesized by solid-state reaction method. This phosphor exhibited wide absorption in ultra-violet and visible range, and bright yellow emission band centering at 570 nm. The concentration quenching mechanism was verified to be a dipole–dipole interaction, and its critical transfer distance was about 17 Å by both calculated crystal structural method and experimental spectral method. This phosphor has a good thermal stability with a quenching temperature (T_1/2) of 200 °C. Yellow and white LEDs were fabricated with this phosphor and near UV chips, and the yellow LED has a high color purity of 97.0% and promising current tolerant property, while the white LED shows a luminous efficiency of 11.68 lm/W.     

Preparation and luminescent properties of BaCa2Si3O9:Eu

A blue emitting phosphor of the triclinic BaCa₂Si₃O₉:Eu²⁺ was prepared by the combustion-assisted synthesis method and an efficient blue emission ranging from the ultraviolet to visible was observed. The luminescence and crystallinity were investigated using luminescence spectrometry and X-ray diffractometry (XRD), respectively. The emission spectrum shows a single intensive band centered at 445 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The excitation spectrum is a broad extending from 260 to 450 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in BaCa₂Si₃O₉:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole-dipole interaction. The CIE of the optimized sample Ba_0.95Ca₂Si₃O₉:Eu_0.05²⁺ was (x, y)=(0.164, 0.111). The result indicates that BaCa₂Si₃O₉:Eu²⁺ can be potentially useful as a UV radiation-converting phosphor for white light-emitting diodes (LEDs).     

Concentration quenching of Eu<Superscript>2+</Superscript> in a novel blue–green emitting phosphor: Ba<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript>

A novel blue–green emitting phosphor Ba₂ZnSi₂O₇: Eu²⁺ was prepared by a combustion synthesis (CS) method. An efficient green emission under conditions ranging from ultraviolet to visible light was observed. The emission spectrum shows a single intensive band centered at 503 nm, which corresponds to the 4f ⁶5d ¹→4f ⁷ transition of Eu²⁺. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in Ba₂ZnSi₂O₇:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole–dipole interaction. The value of the critical transfer distance is calculated as 19 Å, which is in good agreement with the value (20 Å) derived from the experimental data.     

Synthesis and photoluminescence of CeO2:Eu phosphor powders

The crystalline structure and photoluminescence (PL) properties of europium-doped cerium dioxide synthesized by the solid-state reaction method were analyzed. CeO₂:Eu³⁺ phosphor powders exhibit the pure cubic fluorite phase up to 10 mol% doping concentration of Eu³⁺. With indirect excitation of CeO₂ host at 373 nm, the PL intensity quickly increases with increasing Eu³⁺ concentration, up to about 1 mol%, and then decreases indicating the concentration quenching. While with direct excitation (467 nm), much more stronger PL emissions, especially the electric dipole emission ⁵D₀-⁷F₂ at 612 nm, are observed and no concentration quenching occurs up to 10 mol% doping concentration of Eu³⁺. The nature of this behavior and the cause of the concentration quenching were discussed.     

Synthesis and optical properties of red emitting Eu doped CaZrO3 phosphor

Eu³⁺ activated Ca_1−xEu_xZrO₃ (x = 0.01–0.05) phosphor with perovskite structure has been synthesized by sol–gel combustion method. The structure, morphology and optical properties of materials were characterized by X-ray diffraction, scanning electron microscopy and fluorescence spectrometry. The XRD results indicate that crystals of CaZrO₃:Eu³⁺ belongs to orthorhombic perovskite structure. The phosphors can be effectively excited by UV light and the emission spectra results indicate that red luminescence of CaZrO₃:Eu³⁺ due to electric dipole transition ⁵D₀ → ⁷F₂ at 616 nm is dominant. Thus, these prepared phosphors show remarkable luminescent properties which find applications in display devices.     

Potential tunable white-emitting phosphor LiSr4(BO3)3:Ce3+, Eu2+ for ultraviolet light-emitting diodes

A novel Ce³⁺/Eu²⁺ co-activated LiSr₄(BO₃)₃ phosphor has been synthesized by traditional solid-state reaction. The samples could display varied color emission from blue towards white and ultimately to yellow under the excitation of ultraviolet (UV) light with the appropriate adjustment of the relative proportion of Ce³⁺/Eu²⁺. The resonance-type energy transfer mechanism from Ce³⁺ to Eu²⁺ in LiSr₄(BO₃)₃:Ce³⁺, Eu²⁺ phosphors is dominant by electric dipole–dipole interaction, and the critical distance is calculated to be about 29.14 Å by the spectra overlap method. White light was observed from LiSr₄(BO₃)₃:mCe³⁺, nEu²⁺ phosphors with chromaticity coordinates (0.34, 0.30) upon 350 nm excitation. The LiSr₄(BO₃)₃:Ce³⁺, Eu²⁺ phosphor has potential applications as an UV radiation-converting phosphor for white light-emitting diodes.     

Synthesis and luminescence properties of YVO4:Eu,Bi phosphor with enhanced photoluminescence by Bi doping

YVO₄:Eu³⁺,Bi³⁺ phosphors have been prepared by the high-temperature solid-state (HT) method and the Pechini-type sol-gel (SG) method. Spherical SiO₂ particles have been further coated with YVO₄:Eu³⁺,Bi³⁺ phosphor layers by the Pechini-type SG process, and it leads to the formation of core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ phosphors. Therefore, the phase formations, structures, morphologies, and photoluminescence properties of the three types of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors were studied in detail. The average diameters for the phosphor particles are 2-4 μm for HT method, 0.1-0.4 μm for SG method, and 0.5 μm for core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ particles, respectively. Photoluminescence spectra show that effective energy transfer takes place between Bi³⁺ and Eu³⁺ ions in each type of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors. Introduction of Bi³⁺ into YVO₄:Eu³⁺ leads to the shift of excitation band to the long-wavelength region, thus the emission intensities of ⁵D₀-⁷F₂ electric dipole transition of Eu³⁺ at 615 nm upon 365 nm excitation increases sharply, which makes this phosphor a suitable red-emitting materials that can be pumped with near-UV light emitting diodes (LEDs).     

Luminescent properties of a new green emitting Eu doped CaZrSi2O7 phosphor for WLED applications

CaZrSi₂O₇ (CZS), a modification of the thortveitite family, was prepared as a polycrystalline powder material by the conventional solid-state reaction method. Structural, thermal and photoluminescence (PL) properties of the prepared material were investigated in order to evaluate its potentiality. XRD patterns confirm the monoclinic phase of CaZrSi₂O₇: Eu²⁺ phosphors.. Emissions arising from transitions between the 5d and 4f orbital gaps of Eu²⁺ are manifested in the broadband excitation and emission spectra with major peaks at 363 and 512 nm, respectively. The excitation wavelength matches well with that of the emission of the ultraviolet-light emitting diode (UV-LED). Concentration quenching occurs when the Eu²⁺ concentration is beyond 0.05 and the dipole-dipole interaction was the reason for the corresponding quenching mechanism. The temperature dependence of emission intensity of CZS: Eu²⁺ phosphor was investigated and it showed better thermal stability than the standard YAG: Ce³⁺ phosphor.     

Concentration and temperature quenching mechanisms of Dy3+ luminescence in BaGd2ZnO5 phosphors

BaGd₂ZnO₅:Dy³⁺ phosphors were synthesized by a traditional solid-state reaction. The crystal structure of the phosphors was characterized by X-ray diffraction (XRD). The blue emission (456 nm) corresponding to ⁴H_15/2→⁶H_15/2 transition was observed at higher sample temperatures, and the population mechanism of ⁴H_15/2 level was assigned to the thermal excitation of ⁴F_9/2 level. The fluorescence concentration quenching of ⁴F_9/2 level was studied based on Van Uitert's model, and that the electric dipole–dipole interaction was confirmed to be the responsible mechanism for the energy transfer between Dy³⁺ ions. Finally, the fluorescence thermal quenching of ⁴F_9/2 level was studied, and the crossover effect was found to be the main physical mechanism for the fluorescence temperature quenching of Dy³⁺.     

Luminescent properties of red-emitting LiSr4B3O(9−3x/2)Nx:Eu2+ phosphor for white-LEDs

An Eu²⁺-activated oxynitride LiSr_(4?y)B₃O_(9?3x/2)N_x:yEu²⁺ red-emitting phosphor was synthesized by solid-state reactions. The synthesized phosphor crystallized in a cubic system with space group Ia–3d. The LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphors exhibited a broad red emission band with a peak at 610 nm and a full width at half maximum of 106 nm under 410 nm excitation, which is ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The optimal doped nitrogen concentration was observed to be x=0.75. The average decay times of two different emission centers were estimated to be 568 and 489 ns in the LiSr_3.99B₃O_8.25N_0.5:0.01Eu²⁺ phosphors, respectively. Concentration quenching of Eu²⁺ ions occurred at y=0.07, and the critical distance was determined as 17.86 Å. The non-radiative transitions via dipole–dipole interactions resulted in the concentration quenching of Eu²⁺-site emission centers in the LiSr₄B₃O₉ host. These results indicate LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphor is promising for application in white near-UV LEDs.     

Preparation and luminescence of blue-emitting phosphor Ca2PO4Cl:Eu2+ for n-UV white LEDs

A series of blue-emitting Ca_2 ? xEu_xPO₄Cl phosphors were synthesized by a solid state method in a reducing atmosphere. The factors those affect the structure and the photoluminescence (PL) intensities of phosphors, including the dosage of chlorine source CaCl₂, reaction time and annealing temperature, have been investigated in detail. X-ray diffraction (XRD) and photoluminescence measurements were performed to testify the crystal structure and luminescent properties. The optimal Eu²⁺ concentration was determined, and the mechanism of the concentration quenching was predominated by dipole–dipole interaction. The present phosphor exhibits a strong absorption in the near-UV region, emits an intense blue emission centered at 451 nm and presents excellent thermal stability, suggesting that the phosphor is competitive as a promising blue-emitting phosphor for near ultraviolet (n-UV) light-emitting diodes (LEDs).     

Luminescence characteristics of Eu3+ activated borate phosphor for white light emitting diode

In this paper, the Sr₃Y₂ (BO₃)₄:Eu³⁺ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613nm corresponding to the electric dipole ⁵D₀--⁷F₂ transition of Eu³⁺ under 365nm excitation, this is because Eu³⁺ substituted for Y³⁺ occupied the non-centrosymmetric position in the crystal structure of Sr₃Y₂ (BO₃)₄. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet (254nm, 365nm and 400nm) and blue (470nm) light. The effect of Eu³⁺ concentration on the red emission of Sr₃Y₂ (BO₃)₄:Eu³⁺ was measured, the result shows that the emission intensities increase with increasing Eu³⁺ concentration, then decrease. The Commission Internationale del'Eclairage chromaticity (x, y) of Sr₃Y₂(BO₃)₄:Eu³⁺ phosphor is (0.640,0.355) at 15 mol% Eu³⁺.