Crystal structure,spectroscopic properties and density functional theory study of (Z)-1-[(2,4-dimethoxyphenylamino)methylene]naphthalen-2(1H)-one

The Schiff base (Z)-1-[(2,4-dimethoxyphenylamino)methylene]naphthalen-2(1H)-one was synthesized from the reaction of 2-hydroxy-1-naphthaldehyde with 2,4-dimethoxyaniline. The title compound has been characterized by FT-IR, UV-Vis and, X-ray single-crystal techniques. The present X-ray investigation shows that the compound exists in the keto-amine tautomeric form. Molecular geometry and vibrational frequencies of the compound in the ground state have been calculated using the density functional theory (DFT) with 6–311G(d, p) basis set and compared with the experimental data. The calculated results show that the optimized geometry is compatible with the crystal structure and the theoretical vibrational frequencies are in good agreement with the experimental values. Besides, molecular electrostatic potential (MEP), frontier molecular orbital analysis (HOMO-LUMO) and non-linear optical (NLO) properties of the compound were investigated using the same theoretical calculations.     

A combined experimental and computational studies of 3,3,6,6-Tetramethyl-9-(4-Methoxyphenyl)3,4,6,7,9,10 hexahydroacridine-1,8-dione

ABSTRACT

In this work, we have recorded the Fourier Transform Infrared (FTIR) and Ultra-Violet Visible (UV–Vis) spectra of 3,3,6,6-Tetramethyl-9-(4-Methoxyphenyl)3,4,6,7,9,10 hexahydroacridine-1,8-dione (C₂₄H₂₉NO₃) in the spectral range 4000–400?cm^?1 and 190–1400?nm, respectively. The thermo gravimetric (TG) analysis of the compound has been performed to check the thermal stability of the compound. The molecular geometry and complete vibrational spectra in the ground state are calculated by Hartree Fock (HF) and Density Functional Theory (DFT) using6-311G(d,p) basis set. The calculated vibrational harmonic frequencies are scaled using a proper scale factor, yielding a good agreement with the experimental data. Stability of the molecule arising from hyperconjugative interactions, charge delocalisation has been studied using natural bond orbital analysis (NBO). Mulliken charges, MEP mapping and temperature dependence on the thermodynamic properties in the optimised ground state have been calculated. UV–Visible spectrum of the molecule was calculated by using TD-DFT approach and the results were compared with the experimental one. We have calculated the several molecular parameters like ionisation potential, electron affinity, global hardness, electron chemical potential, electronegativity and global electrophilicity based on HOMO and LUMO energy values calculated at B3LYP/6-311G(d,p) level of theory. The calculated optimised structural parameters and vibrational wavenumbers are found to be in good agreement with the experimental results.     

Molecular structure,vibrational spectroscopic,first‐order hyperpolarizability and HOMO,LUMO studies of 3‐hydroxy‐2‐naphthoic acid hydrazide

The Fourier‐transform infrared spectrum of 3‐hydroxy‐2‐naphthoic acid hydrazide (3H2NAH) was recorded in the region 4000–400 cm⁻¹. The Fourier‐transform Raman spectrum of 3H2NAH was also recorded in the region 3500–10 cm⁻¹. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 3H2NAH were carried out by density functional theory (DFT/B3LYP) method with 6‐31G(d,p) as basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the electric dipole moment (µ) and the first‐order hyperpolarizability (β) of the investigated molecule were computed using ab initio quantum mechanical calculations. The UV spectrum was measured in ethanol solution. The calculation results also show that the 3H2NAH molecule might have microscopic nonlinear optical (NLO) behavior with non‐zero values. A detailed interpretation of the infrared and Raman spectra of 3H2NAH is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT‐IR and FT‐Raman spectra for the title molecule have also been constructed. Copyright © 2009 John Wiley & Sons, Ltd.     

Infrared absorption-edges of molecular nonlinear optical crystals: an <Emphasis Type="Italic">ab initio</Emphasis> calculation

A theoretical model suitable for calculating infrared absorption-edges of molecular nonlinear optical (NLO) crystals is introduced from high-level calculations of molecular vibrational spectra. The model is useful for elucidating the relationship between the molecular vibration and macroscopic absorption edges on the IR side of organic nonlinear optical crystals. The first-principle ab initio method carries out the calculations of IR absorption-edges of several typical molecular NLO crystals. These molecular NLO crystals include urea, 2-methyl-4-nitroaniline (MNA), meta-dinotrobenzene (MDNB), 3-methyl-4-methooxy-4^′-nitrostilbene (MMONS), and 3-hydroxyl-4^′-nitrostilbene (HMONS). The calculated results are compared with the measurements and good agreement is found between them. The experimentally unknown values of IR absorption-edges of some new synthesized crystals are predicted. The theoretical analyses of the structural origins of IR absorption cut-offs are discussed. The results are helpful for the molecular simulation and design of potential infrared molecular NLO crystals. Received: 9 April 2002 / Accepted: 18 July 2002 / Published online: 28 October 2002 RID="*" ID="*"Corresponding author. Fax: +86-591/3714946, E-mail: wkc@ms.fjirsm.ac.cn     

Synthesis,structure, spectroscopic (FT-IR) and density functional modelling studies of 1-[(4-ethoxyphenylimino)methyl]napthalene-2-ol

Synthesis, crystallographic characterisation, spectroscopic (Fourier transform infrared spectroscopy [FT-IR]) and density functional modelling studies of the Schiff base 1-[(4-ethoxyphenylimino)methyl]napthalene-2-ol (C₁₉H₁₇NO₂) have been reported. The molecular structure obtained from X-ray single-crystal analysis of the investigated compound in the ground state has been compared using Hartree–Fock and density functional theory (DFT) with the 6-311++G(d,p) basis set. In addition to the optimised geometrical structures, atomic charges, molecular electrostatic potential, natural bond orbital, non-linear optical (NLO) effects and thermodynamic properties of the compound have been investigated by using DFT. The experimental (FT-IR) and calculated vibrational frequencies (using DFT) of the title compound have been compared. The solvent effect was also investigated for obtained molecular energies and the atomic charge distributions of the compound. There exists a good correlation between experimental and theoretical data for enol-imine form of the compound. The total molecular dipole moment (µ), linear polarisability (α), and the first-order hyperpolarisability (β) were predicted by the B3LYP method with different basis sets 6-31G(d), 6-31+G(d,p), 6-31++G(d,p), 6-311+G(d) 150 and 6-311++G(d,p) for investigating the effects of basis sets on the NLO properties. Our computational results yield that β_tot for the title compound is greater than those of urea.     

Vibrational,NMR and UV–visible spectroscopic investigation and NLO studies on benzaldehyde thiosemicarbazone using computational calculations

In order to investigate the vibrational, electronic and NLO characteristics of the compound; benzaldehyde thiosemicarbazone (BTSC), the XRD, FT-IR, FT-Raman, NMR and UV–visible spectra were recorded and were analysed with the calculated spectra by using HF and B3LYP methods with 6-311++G(d,p) basis set. The XRD results revealed that the stabilized molecular systems were confined in orthorhombic unit cell system. The cause for the change of chemical and physical properties behind the compound has been discussed makes use of Mulliken charge levels and NBO in detail. The shift of molecular vibrational pattern by the fusing of ligand; thiosemicarbazone group with benzaldehyde has been keenly observed. The occurrence of in phase and out of phase molecular interaction over the frontier molecular orbitals was determined to evaluate the degeneracy of the electronic energy levels. The thermodynamical studies of the temperature region 100–1000 K to detect the thermal stabilization of the crystal phase of the compound were investigated. The NLO properties were evaluated by the determination of the polarizability and hyperpolarizability of the compound in crystal phase. The physical stabilization of the geometry of the compound has been explained by geometry deformation analysis.     

Vibrational Characterization and Molecular Electronic Investigations of 2-acetyl-5-methylfuran using FT-IR,FT-Raman,UV–VIS,NMR, and DFT Methods

Spectroscopic (FT-IR, FT-Raman, UV–vis, and NMR) techniques have been extensively used for structural elucidation of compounds along with the study of geometrical and vibrational properties. Herein, 2-acetyl-5-methylfuran, a derivative of furan, was experimentally characterized and analyzed in details using FT-IR, FT-Raman, UV–vis, and ¹H NMR spectroscopic techniques conducted in different solvents. The experimentally analyzed spectral results were carefully compared with theoretical values obtained using density functional theory (DFT) calculations at the B3LYP/6–311?+?+?G (d, p) method to support, validate, and provide more insights on the structural characterizations of the titled compound. The correlated experimental and theoretical structural vibrational assignments along with their potential energy distributions (PEDs) and all the spectroscopic spectral investigations of the titled structure were observed to be in good agreements with calculated results.

     

Molecular structure,spectroscopic (FT-IR and UV-Vis) and DFT quantum-chemical studies on 2-[(2,4-Dimethylphenyl)iminomethyl]-6-methylphenol

Density functional calculations of the structure, vibrational spectra, molecular electrostatic potential and thermodynamic functions have been performed at the B3LYP/6-311++G(d,p) level of theory for the Schiff base compound 2-[(2,4-Dimethylphenyl)iminomethyl]-6-methylphenol. Experimental and theoretical Fourier transform infrared (FT-IR) studies of the title compound show the preference of enol form, as supported by X-ray analysis results. Using the time-dependent density functional theory (TD-DFT) method, electronic absorption spectra of the compound have been predicted and a good agreement is determined with the experimental ones. To investigate the tautomeric stability, optimisation calculations at B3LYP/6-311++G(d,p) level were performed for the enol and keto forms of the title compound. Calculated results show that its enol form is more stable than that of the keto form. The predicted non-linear optical properties of the title compound are much greater than those of urea. The changes in thermodynamic properties for the formation of the title compound with the temperature ranging from 200 K to 500 K have been obtained using the statistical thermodynamic method. At 298.15 K the change of Gibbs free energy for the formation reaction of the title compound is 37.03 kJ/mol. The title compound cannot be spontaneously produced from the isolated monomers at room temperature. The tautomeric equilibrium constant is also computed as 1.23×10^?3 at 298.15 K for enol ? keto tautomerisation of the title compound.     

Structural,electrical and optical properties of gamma irradiated methyl para-hydroxy benzoate single crystals

ABSTRACT

Nonlinear optical materials (NLO) have been garnering attention due to their role in optical data storage, optical communication and laser technology. Organic crystals have emerged as an extremely important class of NLO materials, since their NLO properties compare very well with traditional inorganic NLO materials like KCl, LiNbO₃, KDP (potassium dihydrogen phosphate), etc. They offer the additional advantage that they can be grown relatively inexpensively from solution close to room temperature, unlike the inorganic NLO materials which are grown from high temperature melts. In the present work, organic transparent single crystals of methyl para-hydroxy benzoate (MHB) were grown by slow evaporation solution growth technique (SEST) from aqueous solution at room temperature. The changes in structural, electrical and optical properties of gamma irradiated MHB single crystals were studied using X-ray diffraction (XRD), UV–Visible absorption spectroscopy, Photo-luminescence (PL), Fourier transform infrared (FTIR) spectroscopy and AC conductivity measurements at room temperature. The polished MHB single crystals were irradiated with gamma rays of doses 10 and 15 kilogray (kGy). From the XRD analysis, it was observed that gamma irradiation for these doses drastically decreases the crystallinity. The optical absorption constants were examined by UV-Visible absorption spectroscopy, measured over the wavelength range of 200–800?nm, at normal incidence. The optical band gap as estimated from the Tauc plot ((αhν)² vs hν) was found to be reduced with increasing gamma irradiation doses. PL spectra showed emission at wavelengths of 361?nm (3.43?eV) and 452?nm (2.74?eV), with enhanced intensities for the irradiated crystals. FTIR spectroscopy was utilised to identify the functional groups of MHB and indicated the rupture of specific types of bonds with gamma irradiation. Apart from that, the enhancement of AC conductivity with gamma irradiation was also observed for the gamma irradiated crystals.     

Synthesis,spectroscopic properties and DFT study of (E)-1-[(3-(trifluoromethyl)phenylimino)methyl]naphthalen-2-olate

The Schiff base (E)-1-[(3-(trifluoromethyl)phenylimino)methyl]naphthalen-2-olate was synthesized from the reaction of 2-hydroxy-1-naphthaldehyde with 3-trifluoromethylaniline. The title compound has been characterized by FT-IR, UV-vis and X-ray single-crystal techniques. The present X-ray investigation shows that the compound exists in the zwitterionic form. Molecular geometry of the compound in the ground state have been calculated using the density functional method (DFT) with 6-31G(d,p) basis set and compared with the experimental data. The calculated results show that the optimized geometry can well reproduce the crystal structural parameters. By using TD-DFT method electronic absorption spectra of the compound have been predicted and a good agreement with the TD-DFT method and experimental one is determined. In addition DFT calculations of the compound, molecular electrostatic potential (MEP), frontier molecular orbital analysis (HOMO-LUMO) and non-linear optical (NLO) properties were performed at B3LYP/6-31G(d,p).     

Synthesis,crystal structure,Hirshfeld surface analysis,and vibrational and DFT investigation of [C<Subscript>6</Subscript>H<Subscript>10</Subscript>(NH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>3</Subscript>CuBr<Subscript>4</Subscript>.3Br

Single crystal of a new organic–inorganic hybrid material [C₆H₁₀(NH₃)₂]₃CuBr₄.3Br was synthesized by the slow evaporation method at room temperature and characterized by X-ray diffraction, FTIR, Raman spectroscopy, UV–Vis, dielectric measurements, and Hirschfield surface analysis. The title compound crystallizes in trigonal system \( P\overline{3} \).The crystal packing is governed by the N-H…Br and non-classical C-H…Br hydrogen-bonding interactions between the 1, 2-diamoniumcyclohexane cations, the tetrahedral [CuBr₄]^3? anions, and the isolated ion Br^?. Theoretical calculations were performed using density functional theory (DFT) for studying the molecular structure, vibrational spectra, and optical properties of the investigated molecule in the ground state. The optimized geometrical parameters obtained by DFT calculations are in good agreement with single crystal XRD data. The optical properties were investigated by optical absorption and show two bands at 260 and 305 nm.     

Electron–phonon coupling and vibrational modes contributing to linear electro‐optic effect of the efficient NLO chromophore 4‐(N,N‐dimethylamino)‐N‐methyl‐4′‐toluene sulfonate (DAST) from their vibrational spectra

The optimized geometry and structural features of the most prospective electro‐optic crystal 4‐(N,N‐dimethylamino)‐N‐methyl‐4′‐toluene sulfonate (DAST), and the vibrational spectral investigations have been comprehensively described with the near infrared Fourier transform (NIR FT) Raman and Fourier transform infrared (FT‐IR) spectra supported by the density functional theoretical (DFT) computations to elucidate the contribution of vibrational modes to the linear electro‐optic (LEO) effect. Mulliken population analysis and natural bond orbital (NBO) analysis have also been carried out to analyze the effects of intramolecular charge transfer (ICT), intramolecular hydrogen bonding and hyperconjugative interactions on the geometries. The influence of CT interaction between the phenyl ring and the dimethylamino group of the nonlinear optical (NLO) chromophore on the endocyclic and exocyclic angles, and the electronic effects such as hyperconjugation and back‐donation on the methyl hydrogen atoms have been examined. The concurrent intense activation of Raman and IR activities of the effective conjugation vibrational coordinate, which significantly contributes to the LEO effect resulting from the strong electron–phonon (e/ph) coupling, has been analyzed in detail. The effects of frontier orbitals, highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), transition of electron density (ED) transfer and the influence of planarity in the stilbazolium ring on the first hyperpolarizability are also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

UV photoprotection of Osthol

In the present paper, Osthol (molecular formula: C₁₅H₁₆O₃; molecular mass: 244) was obtained from the plant Prangos pabularia by column chromatography technique. This compound was simultaneously exposed to short- (254?nm) and long-wavelength (365?nm) ultraviolet (UV) radiations for different time periods. These irradiated samples were characterized by UV–Visible spectroscopy. No significant variation in optical absorbance/transmittance in broad (200–365?nm) spectrum is observed with increasing dose. The effect of temperature on optical absorption is also insignificant. Effect of UV radiation and temperature on optical band gap (E_g), Urbac energy, or disorder energy (E_u) was also analyzed. A small impact on these optical parameters (E_g and E_u) was observed. This molecule seems very stable (at molecular level) under the influence of UV radiations and temperature. These observed properties shown by this compound projects it as a potential UV protection material.     

Theoretical characterisation of highly efficient dye-sensitised solar cells

Molecular electronic structure calculations, employing density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methodologies, have been carried out to improve the performance of the synthesised dye YD2-o-C8 which is characterised by 11.9%–12.7% efficiencies. We aimed to narrow the band gap of YD2-o-C8 to extend the light-harvesting region to near-infrared (NIR). This was done by incorporating Cd instead of Zn onto the porphyrin ring and elongating the length of π-conjugation by adding ethynylene link and anthracene unit, so that the performances of the suggested cells could be expected to exceed the 11.9%–12.7% efficiencies with TiO₂, ZnO₂, and WO₃ oxide electrodes. The effects of modifying the central metal and elongating the length of π-conjugation on cell performance are confirmed in terms of frontier molecular orbital (FMO) energy gaps, density of states (DOS), molecular electrostatic potentials (MEPs), non-linear optical (NLO) properties, ultraviolet–visible (UV–vis) electronic absorption, and ¹H nuclear magnetic resonance chemical shifts. Increasing the length of π-conjugation of the D–π–A dyes leads to increasing the DOS near Fermi levels, more active NLO performance, strong response to the external electric field, delocalisation of the negative charges near the anchoring groups, deep electron injection, suppressing macrocycle aggregation, active dye regeneration, and inhibited dye recombination. The calculated band gap/eV of the present DMP-Zn is correlated with the experimental (E_1/2(oxidation)–E_1/2(reduction)/V) potentials of the identical YD2-o-C8. A co-sensitiser is suggested for NIR sensitisation (550–950 nm) to increase the power-to-conversion efficiency beyond 14%.     

Growth,structural, spectral,thermal, electrical and optical characterization of a novel optical material: Triethanolamine picrate single crystals for optical applications

The Triethanolamine picrate (TEAP) single crystal was grown by slow evaporation technique. The grown crystal crystallizes in monoclinic system and P2_1/C is the space group determined by Single crystal X-Ray diffraction method. The vibrational modes and functional groups were elucidated from Fourier Transform InfraRed (FTIR) spectra and Fourier Transform Raman (FT-Raman) spectra. The Ultraviolet - Visible (Uv-Vis) studies accomplished the excitation wavelength of the grown crystal is around 203 nm and 354 nm and it is suitable to exhibit second harmonic generation signal. From the absorption data, remarkable optical properties such as optical band gap energy, extinction coefficient were evaluated. The mechanical strength of the grown crystal was examined by Vickers micro hardness test. The temperature of decomposition was confirmed by Thermo Gravimetric / Differential Thermal Analysis (TG/DTA). Kurtz and Perry technique were confirmed the Non-Linear Optics (NLO) property of the crystal. The electrical properties were explained using Dielectric studies.     

Effect of gamma irradiation on hydrothermally synthesized barium titanate nanoparticles

The effect of gamma irradiation on hydrothermally synthesized BaTiO₃ nanoparticles has been investigated. Gamma irradiation was carried out at room temperature from 0, 50, 100, 150, 200?kGy to a maximum dose up to 250?kGy, source being ⁶⁰Co gamma radiations. The structure, size and chemical changes of the BaTiO₃ were studied using X-ray diffraction, Fourier-transform infrared spectrophotometry (FTIR) techniques and scanning electron microscopy (SEM). The optical band gap has been computed by UV–Visible spectroscopy data. From the results obtained, it is evident that the gamma irradiation increases the crystallinity, whereas the particle size of BaTiO₃ nanoparticles is altered. UV–Visible spectroscopy shows a noticeable change in the energy band gap due to gamma irradiation. Significant changes in anharmonicity constant computed using FTIR data due to irradiation has been observed. SEM shows the size and deviation from uniformity of particles.     

Structural,Spectroscopic, Antimicrobial Activity and DFT Studies on 4-Methyl-<Emphasis Type="Italic">N</Emphasis>-(4-methylphenylsulfonyl)-<Emphasis Type="Italic">N</Emphasis>-phenylbenzenesulfonamide

This study reports the structural characterization of a disulfonimide derivative, 4-methyl-N-(4-methylphenylsulfonyl)-N-phenylbenzenesulfonamide (MPBSA), using spectroscopic and quantum chemical methods. The molecule was characterized with FT-IR, ¹H ¹³C NMR and UV-Vis spectroscopies. Quantum chemical calculations of molecular geometry, vibrational wavenumbers and gauge including atomic orbital (GIAO) ¹H and ¹³C-NMR chemical shifts of the compound were carried out by using density functional method (DFT) at B3LYP/6?311++G(d,p) level of theory. Electronic absorption spectra of the compound have been computed using the time-dependent density functional theory (TD-DFT) method at the same level. A satisfactory consistency between the experimental and theoretical findings was obtained. The antimicrobial activity screening of the compound was performed on some bacteria and fungus species using microdilution method. The results showed that the title molecule have noteworthy antibacterial and antifungal activities.     

Scaled Quantum Chemical Studies of the Molecular Structure and Vibrational Spectra of Minoxidil

The Fourier transform Raman and Fourier transform infrared spectra for minoxidil have been recorded in the region 4000—100 cm^?1 and 4000—450 cm^?1, respectively. The structural and spectroscopy data of the molecule in the ground state were calculated by using density functional theory methods with 6-311G (d, p) basis set. A detailed vibrational analysis of the title compound has been done using normal coordinate analysis following the scaled quantum mechanical force field methodology. The calculated molecular geometry parameters and scaled vibrational wavenumbers are well compared with the experimental data. The electronic properties, such as excitation energies, absorption wavelength, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) energies were performed by time-dependent density functional theory approach, and the results are in good agreement with experimental absorption spectrum. The charge delocalizations of these molecules have been analyzed using natural bond orbital analysis. The molecule orbital contributions are studied by density of energy states. Fukui functions, local softness, and electrophilicity indices for selected atomic sites of the title compound are determined. Finally, the thermal behaviors of the compound have been calculated by different temperature.     

Computational studies of vibrational spectra and molecular properties of 6-methyluracil using HF, DFT and MP2 methods

Theoretical investigations of atomic charges, conformers, frontier molecular orbitals, molecular geometries, thermodynamic properties, hyperpolarizabilities and harmonic vibrational frequencies of 6-methyluracil (6MU) have been carried out using ab initio Hartree-Fock (HF), density functional theory (DFT) and second order M?ller-Plesset (MP2) methods. All calculations were performed using the GAMESS-US program package with the basis sets 6-31G(d,p) and 6-311G(d,p). FT-IR and Raman spectra of 6MU were recorded in the regions 50–4000 cm⁻¹ and 60–4000 cm⁻¹ respectively. Optimized geometries were obtained using the global optimization procedure. The calculated structural parameters for two conformers of 6MU have been compared with experimentally observed values. The energy barrier (ΔE=ELUMO-EHOMO) between the HOMO and LUMO is predicted on the basis of theoretical calculations. The simulated TD-DFT spectrum has been compared with experimental electronic spectrum for 6MU. The calculated potential energy distribution (PED) values have been utilized to perform vibrational assignment of the infrared and Raman spectra.