Copper(II) and nickel(II) complexes of tetradentate Schiff base ligand: UV-Vis and FT-IR spectra and DFT calculation of electronic,vibrational and nonlinear optical properties

The experimental fourier transform infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectra of copper(II) and nickel(II) complexes of the deprotonated tetradentate Schiff base ligand N,N′-bis(2-hydroxybenzylidene)-2,2-dimethyl-1,3-propanediamine (H₂L) are compared with their corresponding theoretical ones. The applied theoretical method is based on the density functional theory and time-dependent density functional theory at the UPBE0/PBE0 levels using Def2-TZVP basis set. The computational optimised geometric parameters of the complexes are in good agreement with their corresponding experimental data. The FT-IR and UV-Vis spectra of the complexes were reproduced on the basis of their optimised structures. The vibrational assignments of some fundamental modes of the complexes are performed. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies are calculated. The analyses of the calculated electronic absorption spectra of the complexes are carried out to elucidate the electronic transitions assignments and their characters. Second-order nonlinear optical property of the complexes is evaluated by the above-mentioned theoretical method that implies much greater values for the complexes in comparison with the corresponding value of urea.     

Computational studies on nonlinear optical property of novel Wittig-based Schiff-base ligands and copper(II) complex

Hundred and forty-five novel molecules of Wittig-based Schiff-base (WSB), including copper(II) complex and precursors, were computationally screened for nonlinear optical (NLO) properties. WSB ligands were derived from various categories of amines and aldehydes. Wittig-based precursor aldehydes, (E)-2-hydroxy-5-(4-nitrostyryl)benzaldehyde (f) and 2-hydroxy-5-((1Z,3E)-4-phenylbuta-1,3-dien-1-yl) benzaldehyde (g) were synthesised and spectroscopically confirmed. Schiff-base ligands and copper(II) complex were designed, optimised and their NLO property was studied using GAUSSIAN09 computer program. For both optimisation and hyperpolarisability (finite-field approach) calculations, Density Functional Theory (DFT)-based B3LYP method was applied with LANL2DZ basis set for metal ion and 6-31G* basis set for C, H, N, O and Cl atoms. This is the first report to present the structure–activity relationship between hyperpolarisability (β) and WSB ligands containing mono imine group. The study reveals that Schiff-base ligands of the category N-2, which are the ones derived from the precursor aldehyde, 2-hydroxy-5-(4nitro-styryl)benzaldehyde and pre-polarised WSB coordinated with Cu(II), encoded as Complex-1 (β = 14.671 × 10^?30 e.s.u) showed higher β values over other categories, N-1 and N-3, i.e. WSB derived from precursor aldehydes, 2-hydroxy-5-styrylbenzaldehyde and 2-hydroxy-5-((1Z,3E)-4-phenylbuta-1,3-dien-1-yl)benzaldehyde, respectively. For the first time here we report the geometrical isomeric effect on β value.     

一组新型络合物晶体结构与光学性能的研究

研究了二氯三烯丙基硫脲合镉(ATCC),二氯三烯丙基硫脲合汞(ATMC)和二溴三烯丙基硫脲合镉(ATCB)三种晶体的结构特点.首次报道了ATMC和ATCB晶体的非线性光学系数及倍频性能;文中分析比较了三种晶体的非线性光学性能;讨论了晶体结构与性能的关系,为探索高效非线性光学新材料提供依据.     

Synthesis, characterization, and oxygen sensing properties of Ru(II) complex covalently grafted to mesoporous MCM-41

Novel oxygen sensing materials consisting of [Ru(Bphen)₂bpy]²⁺ (Bphen=4,7-diphenyl-1,10-phenanthroline, bpy=2,2′-bipyridyl) portion covalently grafted to the backbones of the ordered functionalized mesoporous MCM-41 are synthesized by co-condensation of tetraethoxysilane (TEOS) and the functionalized Ru(II) complex [Ru(Bphen)₂Bpy-Si]²⁺ using surfactant cetyltrimethylammoniumbromide (CTAB) as template. The Bpy-Si was used as not only one of the precursors of the sol-gel process but also the second ligand of Ru(Bphen)₂Cl₂·2H₂O complex to prepare the functionalized mesoporous materials for oxygen sensors. Dye leaching shortcoming is overcome due to the Si-C bonds. The derivative mesoporous oxygen sensing materials are characterized by Fourier transform infrared (FT-IR), small angle X-ray diffraction (SAXRD), luminescence intensity quenching Stern-Volmer plots, and excited-state decay analysis. The mesoporous materials show higher sensitivity to the O₂ concentration in N₂ (I₀/I₁₀₀=23.2) and shorter response time (1.2 s) in comparison with those based on sol-gel method. When the concentration of oxygen is 10%, the luminescence intensity of the oxygen sensor can be quenched by 89.9%, suggesting that it is highly sensing at low concentration of oxygen.     

Linear and nonlinear optical properties of 3-nitroaniline (m-NA) and 4-nitroaniline (p-NA) crystals: A DFT/TDDFT study

We have studied the electronic structure and optical responses of 3-nitroaniline and 4-nitroaniline crystals within the framework of density functional theory (DFT). In addition, the excitonic effects are investigated by using the recently published bootstrap exchange-correlation kernel within the time dependent density functional theory (TDDFT) framework. Our calculations based on mBJ approximation yield the indirect band gap for both crystals, but the larger one for m-NA. Due to the excitonic effects, the TDDFT calculations gives rise to the enhanced and red-shifted spectra (compared to RPA). Due to the weak intermolecular interactions, band-structure calculations yield bands with low dispersion for both crystals. This study shows that the substituent groups play an important role in the top of valence band and the bottom of conduction band. Due to the linear structure of p-NA molecule, the highest peaks are located in the optical spectra of p-NA crystal, while m-NA has more sharp peaks, especially at lower energies. Both DFT and TDDFT calculations for the energy loss spectra show plasmon peaks around 27 and 28 eV for p-NA and m-NA, respectively. Due to the non-centrosymmetric structure of m-NA crystal, we also have reported its nonlinear spectra and the 2ω/ω intra-band and inter-band contributions to the dominant susceptibilities. Findings indicate the opposite signs for these contributions, especially at higher energies. The comparison between nonlinear spectra and the linear spectra (as a function of both ω and 2ω) reveals the significant resemblance between linear and nonlinear patterns. In addition to the reasonable agreement between our results with experimental data, this study reveals the spectral similarities between crystalline susceptibility and molecular polarizability.     

Synthesis, characterization and catalytic oxidation properties of multi-wall carbon nanotubes with a covalently attached copper(II) salen complex

Hydroxyl functionalized copper(II) Schiff-base, N,N′-bis(4-hydroxysalicylidene)-ethylene-1,2-diaminecopper(II), [Cu((OH)₂-salen)], has been covalently anchored on modified MWCNTs. The new modified MWCNTs ([Cu((OH)₂-salen)]-MWCNTs) have been characterized by TEM, thermal analysis, XRD, XPS, UV-vis, DRS, FT-IR spectroscopy and elemental analysis. The modified copper(II) MWCNTs solid was used to affect the catalytic oxidation of ethylbenzene with tert-butylhydroperoxide as the oxidant at 333 K. The system is truly heterogeneous (no leaching observed) and reusable (no decrease in activity) in three consecutive runs. Acetophenone was the major product though small amounts of o- and p-hydroxyacetophenones were also formed revealing that C-H bond activation takes place both at benzylic and aromatic ring carbon atoms. Ring hydroxylation was more over the “neat” complexes than over the encapsulated complexes.     

Effect of Zn doping on electronic structure and optical properties zincblende GaN(A DFT+U insight)

The development of new materials,having exceptional properties in comparison to existing materials is highly required for bringing advancement in electronic and optoelectronic technologies.Keeping this fact,we investigated structural,electronic,and optical properties of zincblende GaN doped with selected Zn concentrations(6.25%,12.50%,and 18.70%),using the first-principle calculations based on density functional theory with GGA+U.We conducted the entire study using the WIEN2K code.In this study,we calculated various significant parametric quantities such as cohesive energies,formation energies,bulk moduli,and lattice constants along with the study of optical and electronic properties by substituting Ga atoms with Zn atoms in 1×2×2 supercell.The structural stability is confirmed by studying the phonon dispersion curves which suggest that Zn:GaN material is stable against the 6.25%and 18.70%Zn concentrations while for 12.50%,it shows instability.The Hubbard values U=0,2,4,6 eV were added to GGA and the electronic properties were improved with the U=6 eV.Optical absorption was blue shifted while the refractive index and dielectric constant were increased with increasing the Zn concentrations.Electronic properties are enhanced due to the prime contribution of cations(Zn)3ri states.The optical and electronic properties are further discussed in detail in the entire study.     

A new dioxime ligand and its trinuclear copper(II) complex: Synthesis, characterization and optical properties

The synthesis and characterization of a new dioxime ligand, (H₂L), (III) and its trinuclear copper(II) complex, [Cu₃L₂(H₂O)₂](ClO₄)₂, (V) is described. IR spectra show that the ligand acts in a tetradentate manner and coordinates N₄ donor groups of H₂L to copper(II) ion. The structure of the metal chelate is clarified with the help of elemental analysis, magnetic moment, conductometric and spectroscopic measurements. The optical absorption studies reveal that the transition is direct with band gap energy values are calculated. The optical constants such as refractive index and dielectric constant of the compound were determined. The refractive index dispersion curves of the films obey the single-oscillator model and oscillator parameters. Optical dispersion parameters E₀ and E_d developed by Wemple-DiDomenico were calculated.     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Syntheses,X‐ray crystal structures,and emission properties of protonated tripyridyltriazines and their ruthenium(II) complexes

A series of metal‐free compounds, ie, planar triprotonated triazine, triazineH₃Cl(PF₆)₂ ( 1 ), planar triprotonated triazineH₃Br(PF₆)₂ ( 2 ), and nonplanar monoprotonated triazineHPF₆ ( 3 ), were prepared. Abbreviations used are triazine = tri‐2‐pyridyltriazine. Ruthenium complexes [RuCl(bpy)(L)](PF₆), [RuCl(bpy)(L)](PF₆)₂, and [Ru(L)₂](PF₆)₂ were also prepared, where bpy is 2,2′‐bipyridine and L's are triazine ( 4 ) and monoprotonated triazine ( 5 ), respectively. Ruthenium complexes [Ru(triazine)₂](PF₆)₂ ( 6 ) were also prepared and crystallized. The X‐ray crystal structures of the 3 compounds 1 , 2 , and 3 and the complex 6 were determined. They were also characterized by electrospray ionization mass spectrometry, UV‐vis spectroscopy, and density functional theory calculations.     

Synthesis,spectral and thermal characterization of Bis(diethylammonium) tetrachloromercurate(II)-An nonlinear optical material

A new semiorganic compound, bis(diethylammonium) tetrachloromercurate(II) was grown by slow evaporation solution growth technique at ambient temperature from its aqueous solution. The crystal system and the cell parameters have been identified from the powder X-ray diffraction pattern. The UV–visible absorption of the compound shows absorption at 246 nm and there is absorption observed in the entire visible region indicates that the compound can be used as a nonlinear optical material. The UV–visible transmittance spectrum of grown crystal shows a lower cut-off wavelength at 275 nm and it was found that the crystal is suitable for optoelectronic applications. Thermal studies were carried out to find out the thermal stability and confirm the stoichiometric ratio of the compound. The thermal anomalies in DSC study indicate the occurrence of first order transition in the compound at low temperatures. The FTIR spectrum of the compound characterizes various functional groups. The various kinds of protons and carbons were assigned through NMR (¹H and ¹³C) spectroscopic techniques. The SHG efficiency of the compound was studied by Kurtz-Perry power technique and observed that it has SHG efficiency 1.5 times greater than that of potassium dihydrogen phosphate (KDP). The dielectric constant and dielectric loss of the compound decreases with increase in frequency.     

Synthesis,X-Ray crystal structure,photophysical characterization and nonlinear optical properties of the unique manganese complex with picolinate and 1,10 phenantroline: toward the designing of new high NLO response crystal

The first manganese complex of picolinic acid (also known as 2-pyridinecarboxylic acid) and 1,10 phenantroline has been synthesized, and its structure has been fully characterized by means of X-Ray diffraction method as well as FT-IR, Raman and UV–vis spectroscopies. In order to provide a deep understanding about the relation among the nonlinear optical properties, structural, spectroscopic and electronic behaviors, density functional theory (DFT) calculations have been performed by using hybrid B3LYP level. The intensive interactions between the bonding orbitals of donor O/N atoms and antibonding orbitals of Mn(II) lone pairs confirm the X-Ray diffraction results. Each of the conditions such as small energy gap between HOMO and LUMO, high energy second order perturbation interaction, elongation of conjugated π system and high spin Mn(II) ion induce the first static hyperpolarizability (β) parameter of investigated complex. The β parameter for [Mn(pic)₂(phen)]·H₂O complex has been found to be approximately 22 times higher than p-nitroaniline.     

Geometries,stabilities, and electronic properties analysis in In_nNi~((0,±1)) clusters: Molecular modeling and DFT calculations

Density functional theory(DFT) with the B3 LYP method and the SDD basis set is selected to investigate In_nNi,In_nNi~-, and In_nNi~+ (n = 1–14) clusters. For neutral and charged systems, several isomers and different multiplicities are studied with the aim to confirm the most stable structures. The structural evolution of neutral, cationic, and anionic In_nNi clusters, which favors the three-dimensional structures for n = 3–14. The main configurations of the In_nNi isomers are not affected by adding or removing an electron, the order of their stabilities is also nearly not affected. The obtained binding energy exhibits that the Ni-doped In_(13) cluster is the most stable species of all different sized clusters. The calculated fragmentation energy and the second-order energy difference as a function of the cluster size exhibit a pronounced even–odd alternation phenomenon. The electronic properties including energy gap(E_g), adiabatic electron affinity(AEA), vertical electron detachment energy(VDE), adiabatic ionization potential energy(AIP), and vertical ionization potential energy(VIP) are studied. The total magnetic moments show that the different magnetic moments depend on the number of the In atoms for charged In_nNi. Additionally, the natural population analysis of In_nNi~((0,±1)clusters is also discussed.     

Structural,electronic, optical and elastic properties of the complex K2PtCl6-structure hydrides ARuH6 (A = Mg,Ca, Sr and Ba): first-principles study

We report a systematic study of the structural, electronic, optical and elastic properties of the ternary ruthenium-based hydrides A₂RuH₆ (A = Mg, Ca, Sr and Ba) within two complementary first-principles approaches. We describe the properties of the A₂RuH₆ systems looking for trends on different properties as a function of the A sublattice. Our results are in agreement with experimental ones when the latter are available. In particular, our theoretical lattice parameters obtained using the GGA-PBEsol to include the exchange-correlation functional are in good agreement with experiment. Analysis of the calculated electronic band structure diagrams suggests that these hydrides are wide nearly direct band semiconductors, with a very slight deviation from the ideal direct-band gap behaviour and they are expected to have a poor hole-type electrical conductivity. The TB-mBJ potential has been used to correct the deficiency of the standard GGA for predicting the optoelectronic properties. The calculated TB-mBJ fundamental band gaps are about 3.53, 3.11, 2.99 and 2.68 eV for Mg₂RuH₆, Ca₂RuH₆, Sr₂RuH₆ and Ba₂RuH₆, respectively. Calculated density of states spectra demonstrates that the topmost valence bands consist of d orbitals of the Ru atoms, classifying these materials as d-type hydrides. Analysis of charge density maps tells that these systems can be classified as mixed ionic-covalent bonding materials. Optical spectra in a wide energy range from 0 to 30 eV have been provided and the origin of the observed peaks and structures has been assigned. Optical spectra in the visible range of solar spectrum suggest these hydrides for use as antireflection coatings. The single-crystal and polycrystalline elastic moduli and their related properties have been numerically estimated and analysed for the first time.     

Gaussian basis set of triple zeta valence quality for the atoms from K to Kr: Application in DFT and CCSD(T) calculations of molecular properties

A contracted basis set of triple zeta (TZ) valence quality for the atoms from K to Kr was constructed from fully-optimized Gaussian basis sets generated in this work. Gaussian polarization functions (d, f, and g symmetries), which were optimized at the second-order Mφller–Plesset level, were added to the TZ set. This extends earlier work on segmented contracted TZ basis set for atoms H-Ar. This set along with the BP86 non-hybrid and B3LYP hybrid functionals were used to calculate geometric parameters, dissociation energy, harmonic vibrational frequency, and electric dipole moment of a sample of molecules and, then, comparison with results obtained with other basis sets and with experimental data reported in the literature is done. CCSD(T) atomic excitation energies and bond lengths, dissociation energies, and harmonic vibrational frequencies of some diatomics were also evaluated. Using density functional theory and gauge-including atomic orbitals, ⁵⁷Fe and ⁷⁷Se nuclear magnetic resonance chemical shifts in Fe(C₅H₅)₂, H₂Se, (CH₃)SeH, CSe₂, SeCO, H₂CSe, and SeF₆ were calculated. Comparison with theoretical and experimental values previously published in the literature was done. It is verified that in general these results give good agreement with experimental and benchmark values.     

Experimental vibrational spectra (Raman,infrared) and DFT calculations on monomeric and dimeric structures of 2‐ and 6‐bromonicotinic acid

In this work, the Fourier transform infrared and Raman spectra of 2‐bromonicotinic acid and 6‐bromonicotinic acid (abbreviated as 2‐BrNA and 6‐BrNA, C₆H₄BrNO₂) have been recorded in the region 4000–400 and 3500–50 cm⁻¹. The optimum molecular geometry, normal mode wavenumbers, infrared intensities and Raman scattering activities, corresponding vibrational assignments and intermolecular hydrogen bonds were investigated with the help of B3LYP density functional theory (DFT) method using 6‐311++G(d,p) basis set. Reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. From the calculations, the molecules are predicted to exist predominantly as the C1 conformer. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular structure and vibrational spectra of 3 (or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethiones: FT‐IR,FT‐Raman and DFT quantum chemical calculations

IR and Raman spectra (RS) of polycrystalline 3‐(or 4 or 6)‐methyl‐5‐nitro‐2‐pyridinethione have been measured and analyzed by means of density functional theory (DFT) quantum chemical calculations. The B3LYP/6‐311G(2d,2p) approach has been applied for both the thiol and thione tautomers due to the possibility of the formation of these two thiole forms. Molecular structures of these compounds have been optimized starting from different molecular geometries of the thiol group and thione group. Two conformations of the 2‐mercaptopyridine, trans and cis, have been taken into account. It was shown that the studied compounds appear in the solid state in the thione form. The effect of the hydrogen‐bond formation in the studied compounds has been considered. Copyright © 2008 John Wiley & Sons, Ltd.     

A novel Re(I) complex for electroluminescence application: synthesis, theoretical studies, photophysical and electroluminescent properties

In this paper, we report a novel phosphorescent Re(I) complex of Re(CO)₃(ETCP)Br, where ETCP=1-ethyl-2-naphthalen -1-yl-1H-1,3,7,8-tetraaza-cyclopenta[l]phenanthrene, including its photophysical properties, geometric/electronic structures, electrochemical and thermal properties. Experimental data suggest that Re(CO)₃(ETCP)Br is a promising yellow emitter peaking at 540--nm with short excited state lifetime of ∼0.06 μs. Re(I) center localizes in a distorted octahedral field in Re(CO)₃(ETCP)Br and the emissive state of Re(CO)₃(ETCP)Br has metal-to-ligand-charge-transfer character, leading to the room-temperature phosphorescence. Further analysis reveals that Re(CO)₃(ETCP)Br has HOMO and LUMO energy levels at −6.03 V and −3.56 V, respectively, as well as its high thermal decomposition temperature of 377 °C. Using Re(CO)₃(ETCP)Br as a dopant, an electroluminescence peaking at 565-nm is realized, with a maximum luminance of 5900 cd/m² and a maximum current efficiency of 11.3 cd/A.     

Growth,structure and optical properties of an efficient NLO crystal-aqua maleatocopper(II)

A promising non-linear optical (NLO) crystal, aqua maleatocopper(II) (CuC₄H₂O₄·H₂O), was grown at room temperature by the controlled ionic diffusion technique. Fourier transform infrared spectrum could identify the various functional groups in the crystal. Structural analysis using single crystal XRD revealed that the compound crystallizes in the monoclinic system with space group P2₁ and unit cell parameters a = 7.7277(5) Å, b = 5.2967(3) Å, c = 7.7179(4) Å, α = γ = 109.170(5)°, β = 111.995(2)°. The thermal stability and decomposition pattern of the material were explored using thermogravimetry (TG) and differential thermal analysis (DTA). The optical band gap energy of the material was estimated as 2.2 eV from the diffuse reflectance spectroscopy. The Kurtz and Perry powder technique established the crystal to be an efficient non-linear optical (NLO) material.     

几种N-取代-3-羟基-2-吡啶硫酮Be配合物的结构与光谱性质

在B3LYP/6-31+G(d)级别水平上对4种Be配合物的几何结构进行了全优化,并探讨了烷基取代基对其分子的几何结构和电子结构等方面的影响。采用TD-B3LYP方法在同样级别水平上研究了各配合物的电子吸收光谱,分析了光谱的变化规律。上述计算结果表明,随烷基取代基团给电子能力的增强,前线分子轨道能级升高、能隙增大、最大吸收波长发生蓝移,且最大吸收波长的跃迁类型为配体内的π→π*跃迁.