Thermo-diffusion impact on immiscible flow characteristics of convectively heated vertical two-layered Baffle saturated porous channels in a suspension of nanoparticles: an analytical study

The heat and mass transfer of two immiscible fluids in an inclined channel with thermal diffusion, vicious, and Darcy dissipation is studied. The first region consists of a clear fluid, and the second one is filled with a nanofluid saturated with a porous medium. The behaviors of Cu-H₂O, In-H₂O, and Au-H₂O nanofluids are analyzed. The transport properties are assumed to be constant. The coupled non-linear equations of the flow model are transformed into the dimensionless form, and the solutions for the velocity, temperature, and concentration are obtained by the regular perturbation technique. Investigations are carried out on the flow characteristics for various values of the material parameters. The results show that the velocity and temperature of the fluids enhance with the thermal Grashof number, solutal Grashof number, and Brinkman number while decrease with the porosity parameter and solid volume fraction.     

Non-Darcy effects on convective boundary layer flow past a semi-infinite vertical plate in saturated porous media

The composite effects of viscosity, porosity, buoyancy parameter, thermal conductivity ratio and non-Darcy effects of Brinkman friction and Forscheimmer quadratic drag on the mixed convection boundary layer flow past a semi-infinite plate in a fully-saturated porous regime are theoretically and numerically investigated using Keller’s implicit finite-difference technique and a double-shooting Runge-Kutta method. The Brinkman Forcheimer-extended Darcy model is implemented in the hydrodynamic boundary layer equation. The effects of the various non-dimensional thermofluid parameters, viz Grashof number, Darcy number, and Forchheimer number, and also porosity, thermal conductivity and viscosity parameters on the velocity and temperature fields are discussed. Computations for both numerical schemes are made where possible and found to be in excellent agreement.     

Effects of thermal buoyancy and variable thermal conductivity on the MHD flow and heat transfer in a power-law fluid past a vertical stretching sheet in the presence of a non-uniform heat source

The paper considers the flow of a power-law fluid past a vertical stretching sheet. Effects of variable thermal conductivity and non-uniform heat source/sink on the heat transfer are addressed. The thermal conductivity is assumed to vary linearly with temperature. Similarity transformation is used to convert the governing partial differential equations into a set of coupled, non-linear ordinary differential equations. Two different types of boundary heating are considered, namely Prescribed power-law Surface Temperature (PST) and Prescribed power-law Heat Flux (PHF). Shooting method is used to obtain the numerical solution for the resulting boundary value problems. The effects of Chandrasekhar number, Grashof number, Prandtl number, non-uniform heat source/sink parameters, wall temperature parameter and variable thermal conductivity parameter on the dynamics are shown graphically in several plots. The skin friction and heat transfer coefficients are tabulated for a range of values of the parameters. Present study reveals that in a gravity affected flow buoyancy effect has a significant say in the control of flow and heat transfer.     

Rotational flow of Oldroyd-B nanofluid subject to Cattaneo-Christov double diffusion theory

A nanofluid is composed of a base fluid component and nanoparticles, in which the nanoparticles are dispersed in the base fluid. The addition of nanoparticles into a base fluid can remarkably improve the thermal conductivity of the nanofluid, and such an increment of thermal conductivity can play an important role in improving the heat transfer rate of the base fluid. Further, the dynamics of non-Newtonian fluids along with nanoparticles is quite interesting with numerous industrial applications...     

Experimental studies on heat transfer and friction factor characteristics of CuO/water nanofluid under turbulent flow in a helically dimpled tube

An experimental investigation on the convective heat transfer and friction factor characteristics in the plain and helically dimpled tube under turbulent flow with constant heat flux is presented in this work using CuO/water nanofluid as working fluid. The effects of the dimples and nanofluid on the Nusselt number and the friction factor are determined in a circular tube with a fully developed turbulent flow for the Reynolds number in the range between 2500 and 6000. The height of the dimple/protrusion was 0.6 mm. The effect of the inclusion of nanoparticles on heat transfer enhancement, thermal conductivity, viscosity, and pressure loss in the turbulent flow region were investigated. The experiments were performed using helically dimpled tube with CuO/water nanofluid having 0.1%, 0.2% and 0.3% volume concentrations of nanoparticles as working fluid. The experimental results reveal that the use of nanofluids in a helically dimpled tube increases the heat transfer rate with negligible increase in friction factor compared to plain tube. The experimental results showed that the Nusselt number with dimpled tube and nanofluids under turbulent flow is about 19%, 27% and 39% (for 0.1%, 0.2% and 0.3% volume concentrations respectively) higher than the Nusselt number obtained with plain tube and water. The experimental results of isothermal pressure drop for turbulent flow showed that the dimpled tube friction factors were about 2-10% higher than the plain tube. The empirical correlations developed for Nusselt number and friction factor in terms of Reynolds number, pitch ratio and volume concentration fits with the experimental data within ±15%.     

Analysis of Flow and Heat Transfer in a Vertical Rectangular Duct Using a Non-Darcy Model

Numerical investigation of steady natural convection flow through a fluid-saturated porous medium in a vertical rectangular duct is investigated. The Darcy-Forchheimer-Brinkman model is used to represent the fluid transport within the porous medium. One of the vertical walls of the duct is cooled to a constant temperature, while the other wall is heated to constant but different temperature. The other two sides of the duct are insulated. The finite difference method of second-order accuracy is used to solve the non-dimensional governing equations. The results are presented graphically to show the effects of the Darcy number, inertial parameter, Grashof number, Brinkman number, aspect ratio, and viscosity ratio. It is found that an increase in the Darcy number and inertial parameter reduces the flow intensity whereas an increase in the Grashof number, Brinkman number, aspect ratio, and viscosity ratio increases the flow intensity.     

Convective Transport in a Nanofluid Saturated Porous Layer With Thermal Non Equilibrium Model

The effect of local thermal non-equilibrium on linear and non-linear thermal instability in a horizontal porous medium saturated by a nanofluid has been investigated analytically. The Brinkman Model has been used for porous medium, while nanofluid incorporates the effect of Brownian motion along with thermophoresis. A three-temperature model has been used for the effect of local thermal non-equilibrium among the particle, fluid, and solid-matrix phases. The linear stability is based on normal mode technique, while for nonlinear analysis, a minimal representation of the truncated Fourier series analysis involving only two terms has been used. The critical conditions for the onset of convection and the heat and mass transfer across the porous layer have been obtained numerically.     

Entropy analysis of unsteady magneto-nanofluid flow past accelerating stretching sheet with convective boundary condition

The unsteady laminar magnetohydrodynamics(MHD) boundary layer flow and heat transfer of nanofluids over an accelerating convectively heated stretching sheet are numerically studied in the presence of a transverse magnetic field with heat source/sink. The unsteady governing equations are solved by a shooting method with the Runge-KuttaFehlberg scheme. Three different types of water based nanofluids, containing copper, aluminium oxide, and titanium dioxide, are taken into consideration. The effects of the pertinent parameters on the fluid velocity, the temperature, the entropy generation number, the Bejan number, the shear stress, and the heat transfer rate at the sheet surface are graphically and quantitatively discussed in detail. A comparison of the entropy generation due to the heat transfer and the fluid friction is made with the help of the Bejan number. It is observed that the presence of the metallic nanoparticles creates more entropy in the nanofluid flow than in the regular fluid flow.     

Two phase mixed convection Al2O3–water nanofluid flow in an annulus

Heat transfer enhancement of a mixed convection laminar Al₂O₃–water nanofluid flow in an annulus with constant heat flux boundary condition has been studied employing two phase mixture model and effective expressions of nanofluid properties. The fluid flow properties are assumed constant except for the density in the body force, which varies linearly with the temperature (Boussinesq’s hypothesis), thus the fluid flow characteristics are affected by the buoyancy force. The Brownian motions of nanoparticles have been considered to determine the effective thermal conductivity and the effective dynamic viscosity of Al₂O₃–water nanofluid, which depend on temperature. Three-dimensional Navier–Stokes, energy and volume fraction equations have been discretized using the finite volume method while the SIMPELC algorithm has been introduced to couple the velocity–pressure. Numerical simulations have been presented for the nanoparticles volume fraction (?) between 0 and 0.05 and different values of the Grashof and Reynolds numbers. The calculated results show that at a given Re and Gr, increasing nanoparticles volume fraction increases the Nusselt number at the inner and outer walls while it does not have any significant effect on the friction factor. Both the Nusselt number and the friction coefficient at the inner wall are more than their corresponding values at the outer wall.     

Thermophoresis and Brownian motion effects on boundary layer flow of nanofluid in presence of thermal stratification due to solar energy

The problem of laminar fluid flow,which results from the stretching of a vertical surface with variable stream conditions in a nanofluid due to solar energy,is investigated numerically.The model used for the nanofluid incorporates the effects of the Brownian motion and thermophoresis in the presence of thermal stratification.The symmetry groups admitted by the corresponding boundary value problem are obtained by using a special form of Lie group transformations,namely,the scaling group of transformations.An exact solution is obtained for the translation symmetrys,and the numerical solutions are obtained for the scaling symmetry.This solution depends on the Lewis number,the Brownian motion parameter,the thermal stratification parameter,and the thermophoretic parameter.The conclusion is drawn that the flow field,the temperature,and the nanoparticle volume fraction profiles are significantly influenced by these parameters.Nanofluids have been shown to increase the thermal conductivity and convective heat transfer performance of base liquids.Nanoparticles in the base fluids also offer the potential in improving the radiative properties of the liquids,leading to an increase in the efficiency of direct absorption solar collectors.     

Active and passive controls of nanoparticles in Maxwell stagnation point flow over a slipped stretched surface

A steady stagnation-point flow of an incompressible Maxwell fluid towards a linearly stretching sheet with active and passive controls of nanoparticles is studied numerically. The momentum equation of the Maxwell nanofluid is inserted with an external velocity term as a result of the flow approaches the stagnation point. Conventional energy equation is modified by incorporation of nanofluid Brownian and thermophoresis effects. The condition of zero normal flux of nanoparticles at the stretching surface is defined to impulse the particles away from the surface in combination with nonzero normal flux condition. A hydrodynamic slip velocity is also added to the initial condition as a component of the entrenched stretching velocity. The governing partial differential equations are then reduced into a system of ordinary differential equations by using similarity transformation. A classical shooting method is applied to solve the nonlinear coupled differential equations. The velocity, temperature and nanoparticle volume fraction profiles together with the reduced skin friction coefficient, Nusselt number and Sherwood number are graphically presented to visualize the effects of particular parameters. Temperature distributions in passive control model are consistently lower than in the active control model. The magnitude of the reduced skin friction coefficient, Nusselt number and Sherwood number decrease as the hydrodynamic slip parameter increases while the Brownian parameter has negligible effect on the reduced heat transfer rate when nanoparticles are passively controlled at the surface. It is also found that the stagnation parameter contributes better heat transfer performance of the nanofluid under both active and passive controls of normal mass flux.     

Non-darcy natural convection on a vertical cylinder in a saturated porous medium

The steady free convection boundary layer flow of non-Darcy fluid along an isothermal vertical cylinder embedded in a saturated porous medium using the Ergun model has been studied. The partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme developed by Keller. It is found that the heat transfer is strongly affected by the modified Grashof number which characterizes the non-Darcy fluid, and the curvature parameter. Also the heat transfer is found to be more than that of the flat plate.     

Effect of nanoparticles mean diameter on mixed convection heat transfer of a nanofluid in a horizontal tube

Fully developed mixed convection of a nanofluid (water/Al₂O₃) has been studied numerically. Two-phase mixture model has been used to investigate the effects of nanoparticles mean diameter on the flow parameters. The calculated results demonstrate that the convection heat transfer coefficient significantly increases with decreasing the nanoparticles means diameter. However it does not significantly change the hydrodynamics parameters. Nanoparticles distribution at the tube cross section shows that the non-uniformity of the particles distribution augments when using larger nanoparticles and/or considering relatively high value of the Grashof numbers.     

Natural convection of an alumina-water nanofluid inside an inclined wavy-walled cavity with a non-uniform heating using Tiwari and Das’ nanofluid model

The present study is devoted to numerical analysis of natural convective heat transfer and fluid flow of alumina-water nanofluid in an inclined wavy-walled cavity under the effect of non-uniform heating. A single-phase nanofluid model with experimental correlations for the nanofluid viscosity and thermal conductivity has been included in the mathematical model. The considered governing equations formulated in dimensionless stream function, vorticity, and temperature have been solved by the finite difference method. The cavity inclination angle and irregular walls (wavy and undulation numbers) are very good control parameters for the heat transfer and fluid flow. Nowadays, optimal parameters are necessary for the heat transfer enhancement in different practical applications. The effects of the involved parameters on the streamlines and isotherms as well as on the average Nusselt number and nanofluid flow rate have been analyzed. It has been found that the heat transfer rate and fluid flow rate are non-monotonic functions of the cavity inclination angle and undulation number.     

The effect of real viscosity on the heat transfer of water based Al2O3 nanofluids in a two-sided lid-driven differentially heated rectangular cavity

The heat transfer and fluid flow behavior of water based Al₂O₃ nanofluids are numerically investigated inside a two-sided lid-driven differentially heated rectangular cavity. Physical properties which have major effects on the heat transfer of nanofluids such as viscosity and thermal conductivity are experimentally investigated and correlated and subsequently used as input data in the numerical simulation. Transport equations are numerically solved with finite volume approach using SIMPLEC algorithm. It was found that not only the thermal conductivity but also the viscosity of nanofluids has a key role in the heat transfer of nanofluids. The results show that at low Reynolds number, increasing the volume fraction of nanoparticles increases the viscosity and has a deteriorating effect on the heat transfer of nanofluids. At high Reynolds number, the increase in the viscosity is compensated by force convection and the increase in the volume fraction of nanoparticles which results in an increase in heat transfer is in coincidence with experimental results.     

Effect of variable thermal conductivity and viscosity on single phase convective heat transfer in slip flow

For a variety of fields in which micro-mechanical systems and electronic components are used, fluid flow and heat transfer at the microscale needs to be understood and modeled with an acceptable reliability. In general, models are prepared by making some extensions to the conventional theories by including the scaling effects that become important for microscale. Some of these effects are; axial conduction, viscous dissipation, and rarefaction. In addition to these effects, temperature variable thermal conductivity and viscosity may become important in microscale gas flows due to the high temperature gradients that may exist in the fluid. For this purpose, simultaneously developing, single phase, laminar and incompressible air flow in a microtube and in the micro gap between parallel plates is numerically analyzed. Navier–Stokes and energy equations are solved and the variation of Nusselt number along the channel is presented in tabular and graphical forms as a function of Knudsen, Peclet, and Brinkman numbers, including temperature variable thermal conductivity and viscosity.     

Effects of Brownian Motion and Thermophoresis on the Mixed Convection of Nanofluid in a Porous Channel Including Flow Reversal

This article is devoted to combined convection heat transfer of nanofluids through a vertical channel filled with a homogeneous and isotropic porous medium. The flow is assumed to be fully developed and the “Brinkman extended Darcy” model is used for the flow in the porous media and “clear compatible” viscous dissipation model is considered. Also the model utilized for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The governing momentum, energy, and nanopartices volume fraction equations are solved both analytically and numerically. The effects of the influential dimensionless parameters such as Brownian and thermophoresis parameters, mixed convection parameter (Gr/Re), Brinkman, Darcy and Lewis numbers on dimensionless velocity and temperature distributions and pressure drop are studied. Also, the results of the Nusselt number for the both left and right walls are presented and discussed.     

Fully Developed Mixed Convection Flow in a Vertical Channel Containing Porous and Fluid Layer with Isothermal or Isoflux Boundaries

An analysis of fully developed combined free and forced convective flow in a fluid saturated porous medium channel bounded by two vertical parallel plates is presented. The flow is modeled using Brinkman equation model. The viscous and Darcy dissipation terms are also included in the energy equation. Three types of thermal boundary conditions such as isothermal–isothermal, isoflux–isothermal, and isothermal–isoflux for the left–right walls of the channel are considered. Analytical solutions for the governing ordinary differential equations are obtained by perturbation series method. In addition, closed form expressions for the Nusselt number at both the left and right channel walls are derived. Results have been presented for a wide range of governing parameters such as porous parameter, ratio of Grashof number and Reynolds number, viscosity ratio, width ratio, and conductivity ratio on velocity, and temperature fields. It is found that the presence of porous matrix in one of the region reduces the velocity and temperature.     

Mixed convection flow in vertical channel with boundary conditions of third kind in presence of heat source/sink

The effects of viscous dissipation and heat source/sink on fully developed mixed convection for the laminar flow in a parallel-plate vertical channel are investigated.The plate exchanges heat with an external fluid.Both conditions of equal and different reference temperatures of the external fluid are considered.First,the simple cases of the negligible Brinkman number or the negligible Grashof number are solved analytically.Then,the combined effects of buoyancy forces and viscous dissipation in the presence of heat source/sink are analyzed by a perturbation series method valid for small values of the perturbation parameter.To relax the conditions on the perturbation parameter,the velocity and temperature fields are solved by using the Runge-Kutta fourth-order method with the shooting technique.The velocity,temperature,skin friction,and Nusselt numbers at the plates are discussed numerically and presented through graphs.     

The variation of heat transfer in a two‐sided lid‐driven differentially heated square cavity with nanofluids containing carbon nanotubes for physical properties of fluid dependent on temperature

The behavior of nanofluids containing cylindrical nanoparticles are investigated numerically inside a two‐sided lid‐driven differentially heated square cavity to gain insight into the convective recirculation and flow processes induced by a nanofluid. The physical properties of the base fluid such as viscosity, thermal conductivity and thermal expansion coefficient are, respectively, assumed to be temperature independent (taking the mean temperature of the left and right walls) and temperature dependent. A model is developed to analyze the behavior of nanofluids taking into account the nanoparticle volume fraction whereas the transport equations are solved numerically with finite volume approach using SIMPLEC algorithm. The left and right moving walls are maintained at different constant temperatures while the upper and bottom walls are thermally insulated. The directions of the moving walls were considered in a way that the force and natural convections aid each other. The governing parameter Richardson number was 0.1<Ri<50.0 but due to space constraints only the results for 0.1<Ri<10.0 from fluid flow are presented. It was found that the temperature dependency of physical properties at different Richardson numbers and nanoparticle volume fractions affects the fluid flow and heat transfer in the cavities. Finally, comparisons between the behaviors of the average Nusselt number at the left wall for two cases are presented. Copyright © 2011 John Wiley & Sons, Ltd.