Generating and dimerizing the transient 16-electron phosphinidene complex [Cp*Ir=PAr]: a theoretical and experimental study

The properties of the 16-electron phosphinidene complex [CpRIr=PR] were investigated experimentally and theoretically. Density functional theory calculations show a preferred bent geometry for the model complex [CpIr=PH], in contrast to the linear structure of [CpIr=NH]. Dimerization to give [[CpIr=PH]2] and ligand addition to afford [Cp(L)Ir=PH] (L=PH3, CO) were calculated to give compounds that were energetically highly favorable, but which differed from the related imido complexes. Transient 16-electron phosphinidene complex [Cp*Ir=PAr] could not be detected experimentally. Dehydrohalogenation of [Cp*IrCl2(PH2Ar)] in CH2Cl2 at low temperatures resulted in the novel fused-ring systems 17 (Ar=Mes*) and 20 (Ar=Mes), with dimeric [[Cp*Ir=PAr]2] being the likely intermediate. Intramolecular C-H bond activation induced by steric factors is considered to be the driving force for the irreversible formation of 17 and 20. ONIOM calculations suggest this arises because of the large steric congestion in [[Cp*Ir=PAr]2], which forces it toward a more reactive planar structure that is apt to rearrange.     

Preparation and structure of mono- and binuclear half-sandwich iridium, ruthenium, and rhodium carbene complexes containing 1,2-dichalcogenolao 1,2-dicarba-closo-dodecaboranes

The synthesis of half-sandwich transition metal complexes containing both 1,2-dichalcogenolato-1,2-dicarba-closo-docecaborane (Cab(E,E)) [Cab(E,E)=E(2)C(2)(B(10)H(10)); E = S, Se] and N-heterocyclic carbene (NHC) ligands is described. Addition of mono-NHC ligand to the 16e half-sandwich dichalcogenolato carborane complexes [Cp*Rh(Cab(E,E))], [Cp*Ir(Cab(S,S))], [(p-cymene)Ru(Cab(S,S))] (Cp* = pentamethylcyclopentadienyl) gives corresponding mononuclear 18e dithiolate complexes of the type [LM(Cab(E,E))(NHC)]: [Cp*M(Cab(S,S))(1-ethenyl-3-methylimidazolin-2-ylidene)] (M = Ir (2), Rh (3)), [Cp*Rh(Cab(E,E))(3-methyl-1-picolyimidazolin-2-ylidene)] [E = S (6), Se (7)], [(p-cymene)Ru(Cab(S,S))(NHC)] [NHC = 1-ethenyl-3-methylimidazolin-2-ylidene (4), 3-methyl-1-picolyimidazolin-2-ylidene (8)], whereas bis-NHC give centrosymmetric binuclear complexes [{Cp*M(Cab(S,S))}(2)(1,1'-dimethyl-3,3'-methylene(imidazolin-2-ylidene))] [M = Rh (10), Ir (11)]. The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analyses were performed on complexes 2-4, 6, 8, 10 and 11.     

Chemistry of the phosphinidene oxide ligand

Reaction of [Mo2Cp2(mu-H)(mu-PHR*)(CO)4] with DBU followed by O2 gives the first anionic phosphinidene oxide complex (H-DBU)[MoCp{P(O)R*}(CO)2] (1) (DBU = 1,8-diazabicyclo [5.4.0] undec-7-ene; R* = 2,4,6-C6H2tBu3). This anion displays three different nucleophilic sites located at the O, P, and Mo atoms, as illustrated by the reactions reported. Thus, reaction of 1 with excess HBF4.OEt2 gave the fluorophosphide complex [MoCp(PFR*)(CO)2] via the hidroxophosphide intermediate [MoCp{PR*(OH)}(CO)2]. Related alkoxyphosphide compounds [MoCp{P(OR)R*}(CO)2] (R = Me, C(O)Ph) were prepared by reaction of 1 with [Me3O]BF4 and PhC(O)Cl, respectively, whereas reaction of 1 with MeI or C3H5Br gave the P,O-bound phosphinite complexes [MoCp(kappa2-OPRR*)(CO)2] (R = Me, C3H5). Metal-based electrophiles were found to bind at either O or Mo positions. Thus, reaction of 1 with [ZrCl2Cp2] gave the phosphinidene oxide bridged [MoCp{P(OZrClCp2)R*}(CO)2], whereas reaction with SnPh3Cl gave trans-[MoCp{P(O)R*}(CO)2(SnPh3)], an heterometallic complex having an intact terminal P(O)R* ligand.     

Approaches to trinuclear half-sandwich carbene complexes containing 1,2-dicarba-closo-dodecaboranes

The synthesis of trinuclear half-sandwich iridium and rhodium complexes containing both N-heterocyclic carbene (NHC) and 1,2-dicarba-closo-dodecaborane ligands is described. Complexes {Cp*M[E2C2(B10H10)]}3(L) (Cp*=pentamethylcyclopentadienyl; L=tris(2-(3-methylimidazol-2-ylidene)ethyl)amine; M=Ir (), Rh (); E=S (), Se ()) were obtained from the reactions of Cp*M[E2C2(B10H10)] (M=Ir (), Rh ()) with a silver-NHC precursor or from the reactions of [Cp*MCl2]3(L) (M=Ir (), Rh ()) with Li2E2C2(B10H10) (E=S, Se). The complexes were characterized by IR, NMR spectroscopy, elemental analysis. In addition, X-ray structure analyses were performed on complexes and .     

High yield synthesis and reactivity of a phosphinidene bridged dimolybdenum complex

Protonation of [Mo2Cp2(mu-H)(mu-PHR*)(CO)4] (Cp = eta5-C5H5, R* = 2,4,6-C6H2tBu3) with HBF4.OEt2 gives the hydridophosphinidene complex [Mo2Cp2(mu-H)(mu-PR*)(CO)4]BF4, which is easily deprotonated with H2O to give the known phosphinidene complex [Mo2Cp2(mu-PR*)(CO)4] in 95% yield. Reaction of the latter with I2 gives the unsaturated phosphinidene complex [Mo2Cp2I2(mu-PR*)(CO)2], which exhibits an intermetallic distance of 2.960(2) A. Irradiation of solutions of [Mo2Cp2(mu-PR*)(CO)4] with UV light gives a mixture of the triply bonded [Mo2Cp2(mu-PR*)(mu-CO)2] and the hydridophosphido derivative [Mo2Cp2(mu-H){mu-P(CH2CMe2)C6H2tBu2}(CO)4] as major species. The latter complex results from an intramolecular C-H bond cleavage from a tBu group and has been characterized by spectroscopy and an X-ray study. Irradiation in the presence of HCC(p-tol) results in the insertion of the alkyne into the Mo-P bond to give [Mo2Cp2{mu-eta1:eta2,kappa-C(p-tol)CHPR*}(CO)4] structurally characterized through an X-ray study.     

Trapping reactions of an intermediate containing a tungsten-phosphorus triple bond with alkynes

The thermolysis of the phosphinidene complex [Cp*P[W(CO)5]2] (1) in toluene in the presence of tBuC(triple bond)CMe leads to the four-membered ring complexes [[[eta2-C(Me)C(tBu)]Cp*(CO)W(mu3-P)[W(CO)3]][eta4:eta1:eta1-P[W(CO)5]WCp*(CO)C(Me)C(tBu)]] (4) as the major product and [[W[Cp*(CO)2]W(CO)2WCp*(CO)[eta1:eta1-C(Me)C(tBu)]](mu,eta3:eta2:eta1-P2[W(CO)5]] (5). The reaction of 1 with PhC(triple bond)CPh leads to [[W(Co)2[eta2-C(Ph)C(Ph)]][(eta4:eta1-P(W(CO)5]W[Cp*(CO)2)C(Ph)C(Ph)]] (6). The products 4 and 6 can be regarded as the formal cycloaddition products of the phosphido complex intermediate [Cp*(CO)2W(triple bond)P --> W(CO)5] (B), formed by Cp* migration within the phosphinidene complex 1. Furthermore, the reaction of 1 with PhC(triple bond)CPh gives the minor product [[[eta2:eta1-C(Ph)C(Ph)]2[W(CO)4]2][mu,eta1:eta1-P[C(Me)[C(Me)]3C(Me)][C(Ph)](C(Ph)]] (7) as a result of a 1,3-dipolaric cycloaddition of the alkyne into a phosphaallylic subunit of the Cp*P moiety of 1. Compounds 4-7 have been characterized by means of their spectroscopic data as well as by single-crystal X-ray structure analysis.     

Stepwise synthesis of a hydrido, N-heterocyclic dicarbene iridium(III) pincer complex featuring mixed NHC/abnormal NHC ligands

We describe a stepwise synthesis of the hydrido, N-heterocyclic dicarbene iridium(III) pincer complex [Ir(H)I(C(NHC)CC(aNHC))(NCMe)] (3) which features a combination of normal and abnormal NHC ligands. The reaction of the bis(imidazolium) diiodide [(CH(imid)CHCH(imid))]I(2) (1) with [Ir(μ-Cl)(cod)](2) afforded first the mono-NHC Ir(I) complex [IrI(cod)(CH(imid)CHC(NHC))]I (2), which was then reacted with 2 equiv. of Cs(2)CO(3) in acetonitrile at 60 °C for 40 h to yield 3. These observations support our previously proposed mechanism for the formation of hydrido, N-heterocyclic dicarbene iridium(III) pincer complexes from the reaction of bis(imidazolium) salts with weak bases involving a mono-NHC Ir(I) intermediate. We describe the reactivity of the mono-NHC Ir(I) complex 2 under various conditions. By changing the reaction solvent from MeCN to toluene, we observed the cleavage of the imidazol-2-ylidene ring and the formation of an iminoformamide-containing mono-NHC Ir(I) complex [IrI(cod){[NHCH=CHN(Ad)CHO]CHC(NHC)}] (4). Complex 4 was also prepared in high yield from the reaction of 2 with strong bases (potassium tert-butoxide or potassium hexamethyldisilazane), via the initial formation of the complex [IrI(cod)(CH(NHC)CHC(NHC))] (5), which contains a coordinated NHC moiety and a free carbene arm, followed by subsequent hydrolysis of the latter. The bis(imidazolium) salt 1 can be deprotonated by strong bases to form the bis(carbene) ligand C(NHC)CHC(NHC) (6), which readily reacts with [Ir(μ-Cl)(cod)](2) to give the dinuclear complex [{IrI(cod)}(2)(μ-C(NHC)CHC(NHC))] (7), in which the N-heterocyclic bis(carbene) ligand bridges the two metals through the carbene carbon atoms.     

Variable coordination of amine functionalised N-heterocyclic carbene ligands to Ru, Rh and Ir: C-H and N-H activation and catalytic transfer hydrogenation

Chelating amine and amido complexes of late transition metals are highly valuable bifunctional catalysts in organic synthesis, but complexes of bidentate amine-NHC and amido-NHC ligands are scarce. Hence, we report the reactions of a secondary-amine functionalised imidazolium salt 2a and a primary-amine functionalised imidazolium salt 2b with [(p-cymene)RuCl(2)](2) and [Cp*MCl(2)](2) (M = Rh, Ir). Treating 2a with [Cp*MCl(2)](2) and NaOAc gave the cyclometallated compounds Cp*M(C,C)I (M = Rh, 3; M = Ir, 4), resulting from aromatic C-H activation. In contrast, treating 2b with [(p-cymene)RuCl(2)](2), Ag(2)O and KI gave the amine-NHC complex [(p-cymene)Ru(C,NH(2))I]I (5). The reaction of 2b with [Cp*MCl(2)](2) (M = Rh, Ir), NaO(t)Bu and KI gave the amine-NHC complex [Cp*Rh(NH(2))I]I (6) or the amido-NHC complex Cp*Ir(C,NH)I (7); both protonation states of the Ir complex could be accessed: treating 7 with trifluoroacetic acid gave the amine-NHC complex [Cp*Ir(C,NH(2))I][CF(3)CO(2)] (8). These are the first primary amine- or amido-NHC complexes of Rh and Ir. Solid-state structures of the complexes 3-8 have been determined by single crystal X-ray diffraction. Complexes 5, 6 and 7 are pre-catalysts for the catalytic transfer hydrogenation of acetophenone to 1-phenylethanol, with ruthenium complex 5 demonstrating especially high reactivity.     

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.     

Novel RhCp*/GaCp* and RhCp*/InCp* cluster complexes

The reaction of 6 equivalents of GaCp*(Cp*= pentamethylcyclopentadienyl) with [{Cp*RhCl2}2] yields the complex [Cp*Rh(GaCp*)3(Cl)2] (1) exhibting a cage-like intermetallic RhGa3 center with Ga-Cl-Ga bridges. Treatment of this complex with GaCl3 gives the Lewis acid-base adduct [Cp*Rh(GaCp*)2(GaCl3)]. (2) Reaction of [{Cp*RhCl2}2] with understoichiometric amounts of E(I)Cp*(E = Al, Ga, In) leads to a variety of products strongly dependent on the molecular ratio of the reactants. Thus, the reduction of [{Cp*RhCl2}2] with one equivalent of E(I)Cp*(E = Al, Ga, In) gives the RhII dimer [{Cp*RhCl}2]. The insertion of 3 equivalents of InCp* into the Rh-Cl bonds of [{Cp*RhCl2}2] yields the salt [Cp*2Rh]+[Cp*Rh(InCp*){In2Cl4(mu2-Cp*)}]- (3), the anion exhibiting an intermetallic RhIn(3) center with an intramolecularly bridging Cp* ring. The reaction of [{Cp*RhCl}2] with Cp*Ga yields various insertion products. In trace amount the "all hydrocarbon" cluster complex [(RhCp*)2(GaCp*)3] (6) is obtained. The corresponding ethylene containing cluster complex [{RhCp(GaCp*)(C2H4)}2] (7) can be prepared by treatment of [RhCp*(CH3CN)(C2H4)] with GaCp*.     

Activation of H-H and H-O bonds at phosphorus with diiron complexes bearing pyramidal phosphinidene ligands

The complex [Fe(2)Cp(2)(μ-PMes*)(μ-CO)(CO)(2)] (Mes* = 2,4,6-C(6)H(2)(t)Bu(3)), which in the solid state displays a pyramidal phosphinidene bridge, reacted at room temperature with H(2) (ca. 4 atm) to give the known phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Mes*)] as the major product, along with small amounts of other byproducts arising from the thermal degradation of the starting material, such as the phosphindole complex [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(CH(2)CMe(2))C(6)H(2)(t)Bu(2)}], the dimer [Fe(2)Cp(2)(CO)(4)], and free phosphine PH(2)Mes*. During the course of the reaction, trace amounts of the mononuclear phosphide complex [FeCp(CO)(2)(PHMes*)] were also detected, a compound later found to be the major product in the carbonylation of the parent phosphinidene complex, with this reaction also yielding the dimer [Fe(2)Cp(2)(CO)(4)] and the known diphosphene Mes*P═PMes*. The outcome of the carbonylation reactions of the title complex could be rationalized by assuming the formation of an unstable tetracarbonyl intermediate [Fe(2)Cp(2)(μ-PMes*)(CO)(4)] (undetected) that would undergo a fast homolytic cleavage of a Fe-P bond, this being followed by subsequent evolution of the radical species so generated through either dimerization or reaction with trace amounts of water present in the reaction media. A more rational synthetic procedure for the phosphide complex was accomplished through deprotonation of the phosphine compound [FeCp(CO)(2)(PH(2)Mes*)](BF(4)) with Na(OH), the latter in turn being prepared via oxidation of [Fe(2)Cp(2)(CO)(4)] with [FeCp(2)](BF(4)) in the presence of PH(2)Mes*. To account for the hydrogenation of the parent phosphinidene complex it was assumed that, in solution, small amounts of an isomer displaying a terminal phosphinidene ligand would coexist with the more stable bridged form, a proposal supported by density functional theory (DFT) calculations of both isomers, with the latter also revealing that the frontier orbitals of the terminal isomer (only 5.7 kJ mol(-1) above of the bridged isomer, in toluene solution) have the right shapes to interact with the H(2) molecule. In contrast to the above behavior, the cyclohexylphosphinidene complex [Fe(2)Cp(2)(μ-PCy)(μ-CO)(CO)(2)] failed to react with H(2) under conditions comparable to those of its PMes* analogue. Instead, it slowly reacted with HOR (R = H, Et) to give the corresponding phosphinous acid (or ethyl phosphinite) complexes [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(OR)Mes*}], a behavior not observed for the PMes* complex. The presence of BEt(3) increased significantly the rate of the above reaction, thus pointing to a pathway initiated with deprotonation of an O-H bond of the reagent by the basic P center of the phosphinidene complex, this being followed by the nucleophilic attack of the OR(-) anion at the P site of the transient cationic phosphide thus formed. The solid-state structure of the cis isomer of the ethanol derivative was determined through a single crystal X-ray diffraction study (Fe-Fe = 2.5112(8) ?, Fe-P = 2.149(1) ?).     

Unsaturated dinickel-molybdenum clusters with N-heterocyclic carbene ligands

The first examples of mixed metal trinuclear clusters carrying N-heterocyclic carbene (NHC) ligands were isolated from reactions of the complexes [Ni(NHC)ClCp] [NHC = bis-(2,6-diisopropylphenyl)- or bis-(2,4,6-trimethylphenyl)-imidazol-2-ylidene] with [Mo(CO)(3)Cp](-); the unsaturated 46-electron clusters have triangular MoNi(2) cores and the reaction pathway activates usually inert Ni-Cp and Ni-NHC bonds.     

Oxidation reactions of the phosphinidene oxide ligand

The (H-DBU)+ salt of the anionic phosphinidene oxide complex [MoCp(CO)2{P(O)R*}]- (1) (DBU = 1,8-diazabicyclo[5.4.0]undec-7-ene; R* = 2,4,6-C6H2tBu3) reacts with different oxidizing agents, displaying a multisite activity located at the Mo and P atoms or at the Mo=P bond. Thus, reaction of 1 with [FeCp2]BF4 gives the dimer [Mo2Cp2(CO)4{P(O)R*}2], and reaction with bromine gives the phosphinous acid complex [MoBrCp{P(OH)(CH2CMe2C6H2tBu2}(CO)2], the latter arising from an unprecedented C-H bond addition to the oxide P=O moiety. In contrast, reaction of 1 with p-benzoquinone occurs at the P site to give the P,O-bound phosphonite complex [MoCp{kappa2-OP(OC6H4OH)R*}(CO)2]. Finally, oxygen or sulfur atoms are added to the Mo=P bond by reaction of 1 with Me2CO2 and S8 to give the novel dioxophosphorane or thiooxophosphorane complexes [MoCp(CO)2{kappa2-EP(O)R*}]- (E = O, S). The thiooxophosphorane anion is a good nucleophile and is methylated at either the S or O positions depending on the electrophile used (MeI or (Me3O)BF4) to give the isomers [MoCp{kappa2-(MeS)P(O)R*}(CO)2] and [MoCp{kappa2-SP(OMe)R*}(CO)2], both having novel organophosphorus ligands.     

Carbene- and carbyne-like behavior of the Mo-P multiple bond in a dimolybdenum complex inducing trigonal-pyramidal coordination of a phosphinidene ligand

The phosphinidene complex [Mo2Cp(micro-kappa1:kappa1,eta5-PC5H4)(CO)2(eta6-R*H)] (2; Cp = eta5-C5H5; R* = 2,4,6-C6H2tBu3) has substantially different Mo-P bonds and displays a high reactivity located at the short Mo-P bond. Sideways cycloaddition or addition processes are observed toward RCCR, HCl, and [Fe2(CO)9], to give respectively metallacyclobutene and arylphosphide-bridged and heterometallic phosphinidene-bridged derivatives, a behavior reminiscent of the nucleophilic mononuclear phosphinidene complexes (carbene-like behavior), which is in good agreement with the ground-state electronic structure of 2 derived from density functional theory calculations. However, the reaction of 2 with [Co2(CO)8] implies the addition of two cobalt fragments to its short Mo-P bond and thus reveals a carbyne-like behavior of compound 2. In most of the new products, the P atom displays an unprecedented trigonal-pyramidal-like environment, instead of the expected tetrahedral distribution of bonds.     

Reactivity patterns of thermally stable, terminal, electrophilic phosphinidene complexes towards diazoalkanes: oxidation at the phosphorus centre and formation of P-bound eta1-phosphaazine, eta1-phosphaalkene and eta3-diazaphosphaallene complexes

The thermally stable, terminal phosphinidene complexes [CpM(CO)2(eta1-PNiPr2)]AlCl4(Cp= Cp, Cp*; M = Fe) and [Cp*M(CO)3(eta1-PNiPr2)]AlCl4 (M = Cr, Mo, W) react with Ph2C=N=N to form terminal P-coordinated eta1-phosphaazine and eta3-diazaphosphaallene ligands, respectively, whereas [CpFe(CO)2(eta1-PNiPr2)]AlCl4 reacts with Me3SiCHN2 affording a terminal phosphorus bound eta1-phosphaalkene complex.     

Elimination of R-H from iridium acyl hydrides without loss of CO: evidence for the intervention of metal cation/carbanion pairs

Instead of reductive elimination of aldehyde, or decarbonylation to give a trifluoroalkyl hydride, heating Cp*(PMe3)Ir(H)[C(O)CF3] leads to the quantitative formation of Cp*(PMe3)Ir(CO) and CF3H. Kinetic experiments, isotope-labeling studies, solvent effect studies, and DFT calculations support a mechanism which involves dissociation of trifluoromethyl anion to give the transient ion-pair intermediate [Cp*(PMe3)Ir(H)(CO)]+[CF3]-. Further evidence for the ability of CF3 to act as a leaving group came from investigation of the analogous methyl and chloride derivatives Cp*(PMe3)Ir(Me)[C(O)CF3] and Cp*(PMe3)Ir(Cl)[C(O)CF3]. Both of these compounds undergo a similar loss of trifluoromethyl anion, generating an iridium carbonyl cation and CF3D in CD3OD.     

Base‐Stabilized Phosphinidene Boranes by Silylium‐Ion Abstraction

We report the preparation of N‐heterocyclic carbene (NHC)‐stabilized compounds containing P=B double bonds. The reaction of the highly functionalized phosphinoborane Mes*(SiMe₃)P?B(Cl)Cp* with Lewis bases allows access to base‐stabilized phosphinidene boranes Mes*P=B(L)Cp* (L=4‐dimethylaminopyridine (DMAP), NHC) by Me₃SiCl elimination. The formation of these species is shown to proceed through transient borylphosphide anions generated by Me₃Si abstraction.     

Synthons for coordinatively unsaturated complexes of tungsten, and their use for the synthesis of high oxidation-state silylene complexes

Reduction of Cp*WCl4 afforded the metalated complex (eta6-C5Me4CH2)(dmpe)W(H)Cl (1) (Cp* = C5Me5, dmpe = 1,2-bis(dimethylphosphino)ethane). Reactions with CO and H(2) suggested that 1 is in equilibrium with the 16-electron species [Cp(dmpe)WCl], and 1 was also shown to react with silanes R2SiH2 (R2 = Ph2 and PhMe) to give the tungsten(IV) silyl complexes Cp*(dmpe)(H)(Cl)W(SiHR2) (6a, R2 = Ph2; 6b, R2 = PhMe). Abstraction of the chloride ligand in 1 with LiB(C6F5)4 gave a reactive species that features a doubly metalated Cp ligand, [(eta7-C5Me3(CH2)2)(dmpe)W(H)2][B(C6F5)4] (4). In its reaction with dinitrogen, 4 behaves as a synthon for the 14-electron fragment [Cp*(dmpe)W]+, to give the dinuclear dinitrogen complex ([Cp*(dmpe)W]2(micro-N2)) [B(C6F5)4]2 (5). Hydrosilanes R2SiH2 (R2 = Ph2, PhMe, Me2, Dipp(H); Dipp = 2,6-diisopropylphenyl) were shown to react with 4 in double Si-H bond activation reactions to give the silylene complexes [Cp*(dmpe)H2W = SiR2][B(C6F5)4] (8a-d). Compounds 8a,b (R2 = Ph2 and PhMe, respectively) were also synthesized by abstraction of the chloride ligands from silyl complexes 6a,b. Dimethylsilylene complex 8c was found to react with chloroalkanes RCl (R = Me, Et) to liberate trialkylchlorosilanes RMe2SiCl. This reaction is discussed in the context of its relevance to the mechanism of the direct synthesis for the industrial production of alkylchlorosilanes.     

Metal-template-directed synthesis of diphosphorus compounds through intramolecular phosphinidene additions

Heating the nonchelating cis-bis-7-phosphanorbornadiene-[Mo(CO)4] complex (13) results in the thermal decomposition of one of the 7-phosphanorbornadiene groups. The phosphinidene thus generated adds intramolecularly to a C=C bond of the other ligand to give the novel diphosphorus complex 14. This reaction constitutes a metal-template-directed synthesis. Likewise, the intramolecular phosphinidene addition to the C=C bond of a Mo-phospholene ligand affords the diphos complex 18. Its crystal structure exhibits an extremely small P-Mo-P bite-angle for a five-membered chelate ring. The similar intramolecular 1,2-addition to a C=C bond of a phosphole ligand gives a highly strained, unstable intermediate product. Scission of its P-Mo bond generates a free coordination site, which is then occupied by either CO or a phosphole to yield complexes 22 and 23, respectively. The analogous intermolecular addition of [PhPW(CO)5] to a [phosphole-W(CO)5] complex gives the di-[W(CO)5] complexed adduct 28. The directing effect of the metal on the intra- and intermolecular additions is discussed.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.