The role of cystine knots in collagen folding and stability,part I. Conformational properties of (Pro-Hyp-Gly)5 and (Pro-(4S)-FPro-Gly)5 model trimers with an artificial cystine knot

In analogy to the cystine knots present in natural collagens, a simplified disulfide cross-link was used to analyse the conformational effects of a C-terminal artificial cystine knot on the folding of collagenous peptides consisting of solely (Pro-Hyp-Gly) repeating units. Assembly of the alpha chains into a heterotrimer by previously applied regioselective disulfide-bridging strategies failed because of the high tendency of (Pro-Hyp-Gly)(5) peptides to self-associate and form homotrimers. Only when side-chain-protected peptides were used, for example in the Hyp(tBu) form, and a new protection scheme was adopted, selective interchain-disulfide cross-linking into the heterotrimer in organic solvents was successful. This unexpected strong effect of the conformational properties on the efficiency of well-established reactions was further supported by replacing the Hyp residues with (4S)-fluoroproline, which is known to destabilise triple-helical structures. With the related [Pro-(4S)-FPro-Gly](5) peptides, assembly of the heterotrimer in aqueous solution proceeded in a satisfactory manner. Both the intermediates and the final fluorinated heterotrimer are fully unfolded in aqueous solution even at 4 degrees C. Conversely, the disulfide-crossbridged (Pro-Hyp-Gly)(5) heterotrimer forms a very stable triple helix. The observation that thermal unfolding leads to scrambling of the disulfide bridges was unexpected. Although NMR experiments support an extension of the triple helix into the cystine knot, thermolysis is not associated with the unfolding process. In fact, the unstructured fluorinated trimer undergoes an equally facile thermodegradation associated with the intrinsic tendency of unsymmetrical disulfides to disproportionate into symmetrical disulfides under favourable conditions. The experimental results obtained with the model peptides fully support the role of triple-helix nucleation and stabilisation by the artificial cystine knot as previously suggested for the natural cystine knots in collagens.     

Photocontrol of the collagen triple helix: synthesis and conformational characterization of bis-cysteinyl collagenous peptides with an azobenzene clamp

For the photomodulation of the collagen triple helix with an azobenzene clamp, we investigated various collagenous peptides consisting of ideal (Gly-Pro-Hyp) repeats and containing cysteine residues in various positions for a side chain-to-side chain crosslink with a suitable chromophore derivative. Comparative conformational analysis of these cysteine peptides indicated an undecarepeat peptide with two cysteine residues located in the central portion in i and i+7 positions and flanked by (Gly-Pro-Hyp) repeat sequences as the most promising for the cross-bridging experiments. In aqueous alcoholic solution the azobenzene-undecarepeat peptide formed a stable triple helix in equilibrium with the monomeric species as a trans-azobenzene isomer, whereas photoisomerization to the cis isomer leads to unfolding of at least part of the triple helix. Furthermore, the residual supercoiled structure acts like an intermolecular knot, thus making refolding upon cis-to-trans isomerization a concentration-independent fast event. Consequently, these photoswitchable collagenous systems should be well suited for time-resolved studies of folding/unfolding of the collagen triple helix under variable thermodynamic equilibria.     

Positive and negative design leads to compositional control in AAB collagen heterotrimers

Although collagen is the most abundant protein in the human body and has at least 28 types, research involving collagen mimetic systems only recently began to consider the innate ability of collagen to control helix composition and register. Collagen triple helices can be homotrimeric or heterotrimeric, and while some types of natural collagen form only one specific composition of helix, others can form multiple compositions. It is critical to fully understand and, if possible, reproduce the control that native collagen has on helix composition and register. In this Article, we utilize both positive and negative design for the assembly of specific AAB heterotrimers using charged amino acids to form intrahelix electrostatic interactions, which promote heterotrimer formation and simultaneously discourage homotrimers. Homotrimers are further discouraged by reducing hydroxyproline content, which would otherwise lead to nonspecific promotion of triple helix formation. We combine peptides in a 2:1 ratio in which the more abundant peptide has a charge 1/2 and opposite of the less abundant peptide, which can result in the formation of a zwitterionically neutral AAB heterotrimer. Using this approach, we are able to design collagen mimetic systems with full control over the composition of the resulting triple helix. All previous reports on synthetic collagen heterotrimers have shown mixed populations with respect to composition due to varying amounts of residual homotrimers. Our results yield a greater understanding of the self-assembly of collagenous sequences as well as provide a novel design scheme, both positive and negative, for the synthesis of extracellular matrix mimetics.     

Synthetic collagen heterotrimers: structural mimics of wild-type and mutant collagen type I

Collagen type I is an AAB heterotrimer assembled from two alpha1 chains and one alpha2 chain. Missense mutations in either of these chains that substitute a glycine residue in the ubiquitous X-Y-Gly repeat with a bulky amino acid leads to osteogenesis imperfecta (OI) of varying severity. These mutations have been studied in the past using collagen-like peptide homotrimers as a model system. However, homotrimers, which by definition will contain glycine mutations in all the three chains, do not accurately mimic the mutations in their native form and result in an exaggerated effect on stability and folding. In this article, we report the design of a novel model system based upon collagen-like heterotrimers that can mimic the glycine mutations present in either the alpha1 or alpha2 chains of type I collagen. This design utilizes an electrostatic recognition motif in three chains that can force the interaction of any three peptides, including AAA (all same), AAB (two same and one different), or ABC (all different) triple helices. Therefore, the component peptides can be designed in such a way that glycine mutations are present in zero, one, two, or all three chains of the triple helix. With this design, we for the first time report collagen mutants containing one or two glycine substitutions with structures relevant to native forms of OI. Furthermore, we demonstrate the difference in thermal stability and refolding half-life times between triple helices that vary only in the frequency of glycine mutations at a particular position.     

Surprisingly high stability of collagen ABC heterotrimer: evaluation of side chain charge pairs

Type I collagen is a major component of skin, tendon, and ligament and forms more than 90% of bone mass. It is an AAB heterotrimer assembled from two identical alpha1 and one alpha2 chains. However, the majority of studies on the effects of amino acid substitution on triple helix stability have been performed on collagen homotrimeric helices. In a homotrimer, it is impossible to determine whether the contribution to stability is from the polyproline II helix propensity of the amino acids or from interhelix amino acid interactions. The presence of amino acids in all three chains further exaggerates their contribution. In contrast, in a heterotrimer, the individual chains may be tailored in order to have the substitution in one, two, or all three chains. Therefore, a heterotrimer can divulge specific information about any interaction based upon the substitutions in individual chains. In this paper, we evaluate the contribution of electrostatic interactions between side chain charge pairs on the stability of heterotrimers. We synthesize and analyze the stability of four AAB and four ABC heterotrimers including a surprisingly stable ABC heterotrimer composed of (DOG)10, (PKG)10, and (POG)10 chains (O = hydroxyproline). This heterotrimer has a stability comparable to that of a (POG)10 homotrimer even though D and K occur 20 times in the heterotrimeric helix and have been previously shown to significantly destabilize the triple helix compared to the P and O imino acids. These results show that the stability of heterotrimers cannot be directly determined from the analysis of charge pairs in homotrimers. Because collagen heterotrimers can be designed to have substitution in one, two, or three chains, it gives us the ability to decode cross-strand interactions in collagen in a similar fashion to alpha-helical coiled-coil interactions and DNA duplex hydrogen bonding.     

Controlling the morphology of metal-promoted higher ordered assemblies of collagen peptides with varied core lengths

Self-assembling peptides have become an important subclass of next-generation biomaterials. In particular, materials that mimic the properties of collagen have received considerable attention due to the unique properties of natural collagen. Previous peptide-based designs have been successful in generating structures with morphological properties that were primarily determined by the type of self-assembling mechanism. Herein we demonstrate the metal ion-promoted, supramolecular assembly of collagen-based peptide triple helices into distinct morphologies that are controlled by defining the number of Pro-Hyp-Gly repeating units. We synthesized and characterized collagen-based peptides that incorporated either 5, 7, 9, or 11 Pro-Hyp-Gly repeating units. We found that the number of repeating units, and the resulting stability of the collagen triple helix, is intimately linked with the types of assemblies formed. For instance, collagen peptides that did not form a stable triple helix, such as NCoH5, did not participate in supramolecular assembly with added metal ions. Collagen peptides that formed stable triple helices, such as NCoH11, resulted in microsaddle structures with metal-promoted assembly, whereas a highly cross-linked, three-dimensional mesh formed with NCoH7, albeit at a higher metal ion concentration. These data provide evidence that triple helix formation is required for efficient metal-triggered assembly to the observed microstructures.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometric observation of a peptide triplet induced by thermal cleavage of cystine.

Heat-induced (90 degrees C, 30 min) beta-elimination of a cystine residue leads to cleavage of a disulfide bond and produces a set of three peptides with a cysteine residue, a thiocysteine residue (+32Da), and a dehydroalanine residue (-34Da). This characteristic feature was observed from somatostatin and insulin by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Mass spectrometric observation of this triplet is useful in identifying the presence of a cystine residue in a peptide, and could assist mass spectrometric identification of the peptide from a database.     

Quantitative assessment of cysteine and cystine in peptides and proteins following organomercurial derivatization and analysis by matrix-assisted laser desorption ionization mass spectrometry

Protocols for the analysis of the sulfhydryl content in peptides and proteins using chemical derivatization by organomercurial reagents and analysis by matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) have been developed. The number of reactive cysteine residues in peptides and proteins can be determined by exploiting the affinity and selectivity of organomercurial reagents for macromolecular thiols. Mass shifts observed in MALDI mass spectra obtained before and after cysteine derivatization with p-hydroxy-mercuribenzoate (pHMB) permit the number of free sulfhydryl groups to be determined. The pHMB derivative of each free cysteine residue provides a mass shift of 321 u, overcoming limitations in the mass resolution of MALDI time-of-flight mass spectrometry. Reactive cysteine residues in a macromolecule can be selectively derivatized by using a fivefold molar excess of pHMB reagent. Total sulfhydryl content (i.e., cysteine and cystine) can be determined after disulfide reduction. However, analyses for total cysteine content are more complex, requiring protein denaturation, cystine reduction, and sample purification before derivatization and analysis by MALDI-MS. Conditions for sample denaturation, alkyl-phosphine reduction, pHMB derivatization, and sample purification by analyte adsorption and desalting on protein transfer membranes, are described for cysteine/cystine analysis performed on microgram (10–200 pmol) quantities of somatostatin, insulin, hemoglobin, and β-lactoglobulin.     

Screening for disulfide-rich peptides in biological sources by carboxyamidomethylation in combination with differential matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Peptides with biological functions often contain disulfide bridges connecting two cysteine residues. In an attempt to screen biological fluids for peptides containing cysteine residues, we have developed a sensitive and specific method to label cysteines selectively and detect the resulting molecular mass shift by differential mass spectrometry. First, reduction of disulfide bridges and carboxyamidomethylation of free thiols is adjusted to quantitatively achieve cysteine alkylation for complex peptide extracts. In a second step, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) before and after chemical derivatization is performed, followed by differential analysis to determine shifted peaks; shifted peaks belong to cysteine-containing peptides, other peaks remain unchanged. The number of cysteines can then be determined by the resulting molecular mass shift. Free, reduced cysteines are shifted by 57 u, two oxidized cysteines involved in disulfide bridges (cystine) result in a shift to higher mass per disulfide bridge of 116 u. Disulfide bridges connecting different amino acid chains like insulin break up during reduction. In this case, two peaks with lower molecular masses result from a single one in the unmodified sample. With this technique, we were able to identify cysteine-containing peptides and short fragments of proteins present in human blood filtrate.     

Role of length-dependent stability of collagen-like peptides

Understanding the structure, folding, and stability of collagen is complex because of its length and variations in the amino acid (AA) sequence composition. It is well known that the basic constituent of the collagen helix is the triplet repeating sequence of the form Gly-X(AA)-Y(AA). On the basis of previous models and with the frequency of occurrence of the triplets, the ((Gly-Pro-Hyp)n)3 (where n is the number of triplets) sequence replicate has been chosen as the model for the most stable form of the collagen-like sequence. With a view to understand the role of sequence length (or the number of triplets) on the stability of collagen, molecular dynamics simulations have been carried out by varying the number of triplet units on the model collagen-like peptides. The results reveal that five triplets are required to form the stable triple helix. Further analysis shows that the intermolecular structural rigidity of the imino acid residues, hydrogen bonding, and water structure around the three chains of the triple helix play the dominant roles on its structure, folding, and stabilization.     

Metal-assisted stabilization and probing of collagenous triple helices

Collagen model peptides that contain 2,2'-bipyridyl (bpy) ligands were designed and synthesized. The thermal stability of the collagenous triple helix was increased by forming an Fe(II)(bpy-peptide)(3) complex. The chirality of the metal center was shifted to form right-handed Delta-isomers induced by the supercoiling of the peptide moiety. Moreover, the refolding rate of the triple helix was increased in the presence of Fe(II). This metal-coordinating system possesses potential to be used to stabilize the triple-helical conformation as well as to probe the folding status of collagen model peptides.     

Resonant dissociative electron attachments to cysteine and cystine

Shape-resonant electron attachments to cysteine and cystine and the subsequent dissociation dynamics are investigated with the single-center expansion potential scattering calculations. Selectivity of the direct bond cleavage at a given resonant state or by the specific resonant state coupling is demonstrated with the one-dimensional complex potential energy curves of the temporary anion (cysteine)(-). The wave function of the lowest shape resonant state of the temporary anion (cystine)(-) distinctly shows the localized anti-bond (S-S)* character, implying that this disulfide bond can be easily broken due to the low-energy electron resonant attachment.     

Reciprocity of steric and stereoelectronic effects in the collagen triple helix

In previous work, we demonstrated that 4-fluoroproline residues can contribute greatly to the conformational stability of the collagen triple helix, and that this stability arises from stereoelectronic effects that fix the pucker of the pyrrolidine ring and thereby preorganize the backbone properly for triple-helix formation. Here, we take a reciprocal approach, demonstrating that the steric effect of a 4-methyl group confers stability similar to that from a 4-fluoro group in the opposite configuration. Such fundamental interplay between steric and stereoelectronic effects is heretofore unknown in proteins-natural or synthetic-and provides a new means to modulate conformational stability.     

Imino acids and collagen triple helix stability: characterization of collagen-like polypeptides containing Hyp-Hyp-Gly sequence repeats

The analysis of factors contributing to the stability of proteins is a subject of intense debate. Particularly challenging is the study of structural proteins, since their function is their structure. Among these is collagen, the key structural component of bones, skin, cartilage, tendons, and other connecting tissues. It is well established that the collagen triple helix is characterized by the presence of hydroxyproline, whose content modulates triple helix thermal stability according to the requirement of the host organism. Because of the complexity and the fibrous nature of collagen, data on the stability and structure of this protein have been mainly obtained by the use of collagen-like polypeptides. On the basis of CD characterization of collagen-like polypeptides we here show that the presence of Hyp at the X position of repeating triplets Hyp-Hyp-Gly stabilizes the triple helix significantly. This extra-stabilization has been ascribed, by using molecular modeling, to the formation of a hydrogen bond between Hyp residues belonging to the X and the Y positions of adjacent chains. This communication also provides a comprehensive interpretation of the ensemble of available data on polypeptides containing proline derivatives.     

Stereoelectronic and steric effects in the collagen triple helix: toward a code for strand association

Collagen is the most abundant protein in animals. The protein consists of a helix of three strands, each with sequence X-Y-Gly. Natural collagen is most stable when X is (2S)-proline (Pro) and Y is (2S,4R)-4-hydroxyproline (4R-Hyp). We had shown previously that triple helices in which X is (2S,4S)-4-fluoroproline (4S-Flp) or Y is (2S,4R)-4-fluoroproline (4R-Flp) display hyperstability. This hyperstability arises from stereoelectronic effects that preorganize the main-chain dihedral angles in the conformation found in the triple helix. Here, we report the synthesis of strands containing both 4S-Flp in the X-position and 4R-Flp in the Y-position. We find that these strands do not form a stable triple helix, presumably because of an unfavorable steric interaction between fluoro groups on adjacent strands. Density functional theory calculations indicate that (2S,3S)-3-fluoroproline (3S-Flp), like 4S-Flp, should preorganize the main chain properly for triple-helix formation but without a steric conflict. Synthetic strands containing 3S-Flp in the X-position and 4R-Flp in the Y-position do form a triple helix. This helix is, however, less stable than one with Pro in the X-position, presumably because of an unfavorable inductive effect that diminishes the strength of the interstrand 3S-FlpC=O...H-NGly hydrogen bond. Thus, other forces can counter the benefits derived from the proper preorganization. Although (Pro-Pro-Gly)7 and (4S-Flp-4R-Flp-Gly)7 do not form stable homotrimeric helices, mixtures of these two peptides form stable heterotrimeric helices containing one (Pro-Pro-Gly)7 strand and two (4S-Flp-4R-Flp-Gly)7 strands. This stoichiometry can be understood by considering the cross sections of the two possible heterotrimeric helices. This unexpected finding portends the development of a "code" for the self-assembly of determinate triple helices from two or three strands.     

Rational design of single-composition ABC collagen heterotrimers

Design of heterotrimeric ABC collagen triple helices is challenging due to the large number of competing species that may be formed. Given the required one amino acid stagger between adjacent peptide strands in this fold, a ternary mixture of peptides can form as many as 27 triple helices with unique composition or register. Previously we have demonstrated that electrostatic interactions can be used to bias the helix population toward a desired target. However, homotrimeric assemblies have always remained the most thermally stable species in solution and therefore comprised a significant component of the peptide mixture. In this work we incorporate complementary modifications to this triple-helical design strategy to destabilize an undesirable competing state while compensating for this destabilization in the desired ABC composition. The result of these modifications is a new ABC triple-helical system with high thermal stability and control over composition, as observed by NMR. An additional set of modifications, which exchanges aspartate for glutamate, results in an overall lowering of stability of the ABC triple helix yet shows further improvement in the system's specificity. This rationally designed system helps to elucidate the rules governing the self-assembly of synthetic collagen triple helices and sheds light on the biological mechanisms of collagen assembly.     

Peptides that anneal to natural collagen in vitro and ex vivo

Collagen comprises ? of the protein in humans and ? of the dry weight of human skin. Here, we implement recent discoveries about the structure and stability of the collagen triple helix to design new chemical modalities that anchor to natural collagen. The key components are collagen mimetic peptides (CMPs) that are incapable of self-assembly into homotrimeric triple helices, but are able to anneal spontaneously to natural collagen. We show that such CMPs containing 4-fluoroproline residues, in particular, bind tightly to mammalian collagen in vitro and to a mouse wound ex vivo. These synthetic peptides, coupled to dyes or growth factors, could herald a new era in assessing or treating wounds.     

Fluorescence characterization of the thermal stability of collagen mimic peptides

The thermal stability of triple helical structure plays a critical role in collagen biosynthesis, function and degradation. CD technique was utilized to characterize the thermal stability of synthetic collagen mimic peptides. Fluorescence spectroscopy is widely used with easy access all around the world because of its inexpensive instrumentation, low operation cost, easy operation, and high sensitivity. Here we have developed an alternative fluorescence method to detect the thermal stability of collagen mimic peptides. We have demonstrated that fluorescence spectroscopy could measure the thermal stability of collagen mimic peptides with low concentrations under different circumstances. This highly sensitive fluorescence self-quenching assay will greatly expedite the studies of sequence-dependent properties of collagen mimic peptides, and it has great potential in the application of determining the thermal stability of triple helix systems such as collagens, collectins, adiponectin, macrophage scavenger and C1q.     

Collagen-like peptides and peptide–polymer conjugates in the design of assembled materials

Collagen is the most abundant protein in mammals, and there has been long-standing interest in understanding and controlling collagen assembly in the design of new materials. Collagen-like peptides (CLPs), also known as collagen-mimetic peptides (CMPs) or collagen-related peptides (CRPs), have thus been widely used to elucidate collagen triple helix structure as well as to produce higher-order structures that mimic natural collagen fibers. This mini-review provides an overview of recent progress on these topics, in three broad topical areas. The first focuses on reported developments in deciphering the chemical basis for collagen triple helix stabilization, which we review not with the intent of describing the basic structure and biological function of collagen, but to summarize different pathways for designing collagen-like peptides with high thermostability. Various approaches for producing higher-order structures via CLP self-assembly, via various types of intermolecular interaction, are then discussed. Finally, recent developments in a new area, the production of polymer–CLP bioconjugates, are summarized. Biological applications of collagen contained hydrogels are also included in this section. The topics may serve as a guide for the design of collagen-like peptides and their bioconjugates for targeted application in the biomedical arena.     

Analysis of collagen type III by uninterrupted sodium dodecyl sulfate-polyacrylamide gel electrophoresis and immunoblotting: changes in collagen type III polymorphism in aging rats.

A new method of type III collagen analysis by uninterrupted sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) combined with immunoblotting was developed. The electrophoresis was carried out with gels containing 4 M urea. A negatively charged reducing agent, thioglycolic acid, was added to the running buffer of the cathodic reservoir between 15 and 20 min after Bromphenol Blue (BPB) migrated to the top of the separating gel, to reduce interchain disulfide binding of the collagen. The polymorphic type III collagens, i.e., an alpha-chain derived from a trimer [alpha 1(III)]3 with interchain disulfide bonds but without covalent cross-links, alpha 1(III), a beta-chain with covalent cross-links, beta(III), or an alpha-chain released from a trimer without reduction of the disulfide bonds, alpha*1(III), were identified by immunostaining and quantified by densitometry. Using this method, changes in collagen type III polymorphism with aging were examined in the aorta, brachial artery, and skin of rats. The total quantity of collagen type III decreased with aging in all tissues. beta(III) was the major component in the aorta and brachial artery, but alpha 1(III) was the major component in the skin. With increasing age from 3 to 60 weeks, the ratio of beta(III) to alpha 1(III), which is correlated with the extent of covalent cross-linking, showed a steep increase in the aorta but only a slight increase in the skin and it remained almost constant in the brachial artery.(ABSTRACT TRUNCATED AT 250 WORDS)