Variable coordination modes of NO2(-) in a series of Ag(I) complexes containing triorganophosphines, -arsines,and -stibines. Syntheses,spectroscopic characterization (IR, 1H and 31P NMR,electrospray ionization mass), and structures of [AgNO2(R(3)E)(x)] adducts (E = P,As, Sb,x = 1-3)

Adducts of triorganophosphine, triphenylarsine, and triphenylstibine with silver(I) nitrite have been synthesized and characterized both in solution ((1)H, (31)P NMR) and in the solid state (IR, single-crystal X-ray structure analysis). In addition aggregates of AgNO(2) and ER(3) (E = P, As, Sb) have been identified in solution by electrospray ionization mass spectrometry (ESI-MS). The topology of the structures in the solid state was found to depend on the nature of ER(3) and on the stoichiometric ratio AgNO(2):ER(3). The adducts AgNO(2):EPh(3) (1:1) (E = P or Sb) are one-dimensional polymers, the role of NO(2)(-) being to bridge successive metal atoms by coordination of the two oxygens to one silver atom and the nitrogen lone pair to a successive Ag. The adduct AgNO(2):P(o-tolyl)(3) (1:1) is mononuclear, due to steric hindrance of the phosphine, the nitrite being O,O'-bidentate, a rare example of a quasi-linear P-Ag-X array. AgNO(2):P(p-F-C(6)H(4))(3) (1:1) is a dimer, the nitrite being coordinated through both oxygens, the first unidentate, the second bridging bidentate. P(o-tolyl)(3) and Pcy(3) form 1:2 adducts, also mononuclear, the nitrite still an O,O'-chelate. In contrast, the adduct AgNO(2):AsPh(3) (1:2) is a centrosymmetric dimer, essentially an aggregate of a pair of [Ag(O(2)N)(AsPh(3))(2)] arrays with one nitrite oxygen being the bridging atom. The adducts AgNO(2):EPh(3) (1:3) (E = As, Sb) are mononuclear, the nitrite behaving as a consistently strong O,O'-chelate. The E = As adduct is a triclinic solvated form, whereas the unsolvated E = Sb species is monoclinic. ESI-MS spectra of acetonitrile solutions of these complexes show the existence of [Ag(ER(3))](+), [Ag(CH(3)CN)](+), [Ag(CH(3)CN)(2)](+), [AgCl(2)](-), [Ag(NO(2))(2)](-), [Ag(ER(3))(CH(3)CN)](+), and [Ag(ER(3))(2)](+) as well as higher aggregates [Ag(2)(NO(2))(ER(3))(2)](+), [Ag(2)(NO(2))(3)](-) and [Ag(2)Cl(2)(NO(2))](-), which are less prevalent.     

Preparation, spectroscopy, EXAFS, electrochemistry and pharmacology of new ruthenium(II) carbonyl complexes containing ferrocenylthiosemicarbazone and triphenylphosphine/arsine

A new series of new hetero-bimetallic complexes containing iron and ruthenium of the general formula [RuCl(CO)(B)(EPh3)(L)] (where E=P or As; B=PPh3, AsPh3, py or pip; L=ferrocene derived monobasic bidentate thiosemicarbazone ligand) have been synthesized by the reaction between ferrocene-derived thiosemicarbazones and ruthenium(II) complexes of the type [RuHCl(CO)(B)(EPh3)2] (where E=P or As; B=PPh3, AsPh3, py or pip). The new complexes have been characterized by elemental analyses, IR, electronic, NMR (1H, 13C and 31P), EXAFS (extended X-ray absorption fine structure spectroscopy) and cyclic voltammetric techniques. Antibacterial activity of the new complexes has been screened against Escherichia coli, Vibrio cholerae, and Pseudomonas aeruginosa species.     

Solution and mechanochemical syntheses, and spectroscopic and structural studies in the silver(I) (bi-)carbonate: triphenylphosphine system

Syntheses of a number of adducts of silver(I) (bi-)carbonate with triphenylphosphine, both mechanochemically, and from solution, are described, together with their infra-red spectra, (31)P CP MAS NMR and crystal structures. Ag(HCO(3)):PPh(3) (1:4) has been isolated in the ionic form [Ag(PPh(3))(4)](HCO(3))·2EtOH·3H(2)O. Ag(2)CO(3):PPh(3) (1:4) forms a binuclear neutral molecule [(Ph(3)P)(2)Ag(O,μ-O'·CO)Ag(PPh(3))(2)](·2H(2)O), while Ag(HCO(3)):PPh(3) (1:2) has been isolated in both mononuclear and binuclear forms: [(Ph(3)P)(2)Ag(O(2)COH)] and [(Ph(3)P)(2)Ag(μ-O·CO·OH)(2)Ag(PPh(3))(2)] (both unsolvated). A more convenient method for the preparation of the previously reported copper(I) complex [(Ph(3)P)(2)Cu(HCO(3))] is also reported.     

Synthesis and spectral characterization of 2'-hydroxy chalconate complexes of ruthenium(II) and their catalytic and biological applications

The reactions of [RuHCl(CO)(B)(EPh(3))(2)] (B=EPh(3) or pyridine; E=P or As) and 2'-hydroxychalcones in 1:2 ratio led to the formation of [Ru(CO)(B)(L)(2)] (B=PPh(3), AsPh(3) or Py; L=2'-hydroxychalcones). The new complexes have been characterized by analytical and spectral (IR, electronic and (1)H NMR) data. They have been assigned an octahedral structure. The new complexes were found to catalyze the oxidation of alcohols to aldehydes using N-methylmorpholine-N-oxide as co-oxidant. All the new complexes were found to be active against bacteria such as E. coli, Salmonella typhi and fungi Aspergillus niger. The activity was compared with standard Streptomycin or Bavistin.     

Ruthenium(II) hydrazone Schiff base complexes: synthesis, spectral study and catalytic applications

Ruthenium(II) hydrazone Schiff base complexes of the type [RuCl(CO)(B)(L)] (were B=PPh(3), AsPh(3) or Py; L=hydrazone Schiff base ligands) were synthesized from the reactions of hydrazone Schiff base ligand (obtained from isonicotinoylhydrazide and different hydroxy aldehydes) with [RuHCl(CO)(EPh(3))(2)(B)] (where E=P or As; B=PPh(3), AsPh(3) or Py) in 1:1 molar ratio. All the new complexes have been characterized by analytical and spectral (FT-IR, electronic, (1)H, (13)C and (31)P NMR) data. They have been tentatively assigned an octahedral structure. The synthesized complexes have exhibited catalytic activity for oxidation of benzyl alcohol to benzaldehyde and cyclohexanol to cyclohexanone in the presence of N-methyl morpholine N-oxide (NMO) as co-oxidant. They were also found to catalyze the transfer hydrogenation of aliphatic and aromatic ketones to alcohols in KOH/Isopropanol.     

Synthesis, spectral, catalytic and antimicrobial studies of PPh3/AsPh3 complexes of Ru(II) with dibasic tridentate O, N, S donor ligands

Complexes of the type [Ru(CO)(EPh(3))(B)(L)] (E = P or As; B = PPh(3), AsPh(3), py or pip; L=dianion of the Schiff bases derived from thiosemicarbazone with acetoacetanilide, acetoacet-o-toluidide and o-chloro acetoacetanilide) have been synthesized from the reactions of equimolar amounts of [RuHCl(CO)(EPh(3))(2)(B)] and Schiff bases in benzene. The new complexes have been characterized by analytical and spectral (IR, electronic, NMR) data. The arrangement of PPh(3) groups around ruthenium metal was determined from (31)P NMR spectra. An octahedral structure has been assigned for all the new complexes. All the complexes exhibited catalytic activity for the oxidation of benzyl alcohol and cyclohexanol in presence of N-methylmorpholine-N-oxide as co-oxidant. The complexes also exhibited antibacterial activity against E. coli, Aeromonas hydrophilla and Salmonella typhi. The activity was compared with standard streptomycin.     

Luminescent complexes of silver(I) with pyridylbis(3-hexamethyleneiminyl thiosemicarbazone): effect of the counterion on the nuclearity

The reaction of pyridylbis(3-hexamethyleneiminyl thiosemicarbazone) (H(2)Plhexim) with various silver(I) salts and metal-ligand ratios led to the isolation of different complexes of the formulae [Ag(NO(3))(H(2)Plhexim)]·H(2)O (1), [Ag(2)(NO(3))(H(2)Plhexim)(CH(3)OH)](NO(3)) (2), [Ag(2)(ClO(4))(2)(H(2)Plhexim)] (3), [Ag(HPlhexim)]·xH(2)O (4), [Ag(HPlhexim)] (4a), [Ag(2)(Plhexim)(PPh(3))(4)]·2MeOH (5) and [Ag(4)(Plhexim)(2)]·DMF (6). The complexes were fully characterized by elemental analysis, ESI mass spectrometry, IR and NMR ((1)H, (31)P) spectroscopy. The structures of 4a, 5 and 6 were also identified by single crystal X-ray structure determination. The concentration dependence on the absorption spectra of the methanolic solutions indicates polymerization equilibria in the ground state in both the ligand and the complexes. While H(2)Plhexim is essentially non-fluorescent, complexes 1-5 fluoresce more strongly by comparison. This fluorescent behavior is consistent with the monomeric or dimeric nature of the complexes.     

Luminescent property and catalytic activity of Ru(II) carbonyl complexes containing N, O donor of 2-hydroxy-1-naphthylideneimines

The reaction of the chelating ligands (obtained by the condensation of 2-hydroxy-1-naphthaldehyde with various primary amines) with [RuHCl(CO)(EPh(3))(2)(B)] (where E=P; B=PPh(3), py or pip: E=As; B=AsPh(3)) in benzene afforded new stable ruthenium(II) carbonyl complexes of the general formula [Ru(Cl)(CO)(EPh(3))(B)(L)] (L=anion of bidentate Schiff bases). The structure of the new complexes was investigated using elemental analyses, spectral (FT-IR, UV-vis and (1)H NMR) and electrochemical studies and is found to be octahedral. All the metal complexes exhibit characteristic MLCT absorption and luminescence bands in the visible region. The luminescence efficiency of the ruthenium(II) complexes was explained based on the ligand environment around the metal ion. These complexes catalyze oxidation of primary and secondary alcohols into their corresponding carbonyl compounds in the presence of N-methylmorpholine-N-oxide (NMO) as the source of oxygen. The formation of high valent Ru(IV)=O species as a catalytic intermediate is proposed for the catalytic process.     

Electronic and steric effects on molecular dihydrogen activation in [CpOsH4(L)]+ (L = PPh3, AsPh3, and PCy3)

Single-crystal neutron diffraction, inelastic neutron scattering, and density functional calculations provide experimental and theoretical analyses of the nature of the osmium-bound, "elongated" dihydrogen ligands in [Cp*OsH(4)(L)][BF(4)] complexes (L = PPh(3), AsPh(3), or PCy(3)). The PPh(3) and AsPh(3) complexes clearly contain one dihydrogen ligand and two terminal hydrides; the H(2) ligand is transoid to the Lewis base, and the H-H vector connecting the central two hydrogen atoms lies parallel to the Ct-Os-L plane (Ct = centroid of Cp* ring). In contrast, in the PCy(3) complex the H-H vector is perpendicular to the Ct-Os-L plane. Not only the orientation of the central two hydrogen atoms but also the H-H bond length between them depends significantly on the nature of L: the H...H distance determined from neutron diffraction is 1.01(1) and 1.08(1) A for L = PPh(3) and AsPh(3), respectively, but 1.31(3) A for L = PCy(3). Density functional calculations show that there is a delicate balance of electronic and steric influences created by the L ligand that change the molecular geometry (steric interactions between the Cp* and L groups most importantly change the Ct-Os-L angle), changing the relative energy of the Os 5d orbitals, which in turn govern the H-H distance, preferred H-H orientation, and rotational dynamics of the elongated dihydrogen ligand. The geometry of the dihydrogen ligand is further tuned by interactions with the BF(4)(-) counterion. The rotational barrier of the bound H(2) ligand in [Cp*OsH(4)(PPh(3))](+), determined experimentally (3.1 kcal mol(-)(1)) from inelastic neutron scattering experiments, is in reasonable agreement with the B3LYP calculated H(2) rotational barrier (2.5 kcal mol(-)(1)).     

Chiral organometallic triangles with Rh-Rh bonds. 1. Compounds prepared from racemic cis-Rh2(C6H4PPh2)2(OAc)2

Reaction of racemic cis-Rh(2)(C(6)H(4)PPh(2))(2)(OAc)(2)(HOAc)(2) with excess Me(3)OBF(4) in CH(3)CN results in the formation of racemic cis-[Rh(2)(C(6)H(4)PPh(2))(2)(CH(3)CN)(6)](BF(4))(2).0.5H(2)O (1.0.5H(2)O), an ionic dirhodium complex which has two cisoid nonlabile orthometalated phosphine bridging anions and six labile CH(3)CN ligands in equatorial and axial positions. Reactions of 1 with tetraethylammonium salts of the linear dicarboxylates, oxalate, terephthalate, and 4,4'-biphenyl-dicarboxylate, in organic solvents, produced racemic crystals of the triangular compounds [Rh(2)(C(6)H(4)PPh(2))(2)](3)(C(2)O(4))(3)(py)(6).6MeOH.H(2)O (2.6MeOH.H(2)O), [Rh(2)(C(6)H(4)PPh(2))(2)](3)(O(2)CC(6)H(4)CO(2))(3)(DMF)(6).6.5DMF.0.5H(2)O (3.6.5DMF.0.5H(2)O), and [Rh(2)(C(6)H(4)PPh(2))(2)](3)(O(2)CC(6)H(4)C(6)H(4)CO(2))(3)(py)(6).4.5CH(3)OH.0.75H(2)O (4.4.5CH(3)OH.0.75H(2)O), respectively. All compounds are electrochemically active. The relative chiralities of the dirhodium units in each triangle have been established using a combination of data from X-ray crystallography and (31)P NMR spectroscopy.     

Characterization of Five-Coordinate Ruthenium(II) Phosphine Complexes by X-ray Diffraction and Solid-State (31)P CP/MAS NMR Studies and Their Reactivity with Sulfoxides and Thioethers

31P CP/MAS NMR spectroscopy is examined as a method of characterization for ruthenium(II) phosphine complexes in the solid state, and the results are compared with X-ray crystallographic data determined for RuCl(2)(dppb)(PPh(3)) (dppb = Ph(2)P(CH(2))(4)PPh(2)), RuBr(2)(PPh(3))(3), and the previously determined RuCl(2)(PPh(3))(3). Crystals of RuBr(2)(PPh(3))(3) (C(54)H(45)Br(2)P(3)Ru) are monoclinic, space group P2(1)/a, with a = 12.482(4) ?, b = 20.206(6) ?, c = 17.956(3) ?, beta = 90.40(2) degrees, and Z = 4, and those of RuCl(2)(dppb)(PPh(3)) (C(46)H(43)Cl(2)P(3)Ru) are also monoclinic, space group P2(1)/n, with a = 10.885(2) ?, b = 20.477(1) ?, c = 18.292(2) ?, beta = 99.979(9) degrees, and Z = 4. The structure of RuBr(2)(PPh(3))(3) was solved by direct methods, and that of RuCl(2)(dppb)(PPh(3)) was solved by the Patterson method. The structures were refined by full-matrix least-squares procedures to R = 0.048 and 0.031 (R(w) = 0.046 and 0.032) for 5069 and 5925 reflections with I >/= 3sigma(I), respectively. Synthetic routes to RuBr(2)(dppb)(PPh(3)) and [RuBr(dppb)](2)(&mgr;(2)-dppb) are reported. The reactivity of RuCl(2)(dppb)(PPh(3)) with the neutral two-electron donor ligands (L) dimethyl sulfoxide, tetramethylene sulfoxide, tetrahydrothiophene, and dimethyl sulfide to give [(L)(dppb)Ru(&mgr;-Cl)(3)RuCl(dppb)] is discussed.     

Acceptor (CF3)PCPH pincer reactivity with (PPh3)3Ir(CO)H

The syntheses of Ir(I) and Ir(III) complexes incorporating the electron-withdrawing pincer ligand (1,3-C(6)H(4)(CH(2)P(CF(3))(2))(2)) ((CF(3))PCPH) with (PPh(3))(3)Ir(CO)H and subsequent chemistry are reported. Under ambient conditions, reaction of 1 equiv. (CF(3))PCPH with (PPh(3))(3)Ir(CO)H gave the mono-bridged complex [Ir(CO)(PPh(3))(2)(H)](2)(μ-(CF(3))PCPH) (1). Reaction of (PPh(3))(3)Ir(CO)H with excess (CF(3))PCPH and MeI gave the doubly-bridged complex [Ir(CO)(PPh(3))(H)](2)(μ-(CF(3))PCPH)(2) (2), whereas the tetrameric oligomer [Ir(CO)(PPh(3))(H)](4)(μ-(CF(3))PCPH)(4) (2-sq) was obtained from a 1:1 ligand:metal mixture in benzene in the presence of excess MeI. At higher temperatures (165 °C) the reaction of (CF(3))PCPH with (PPh(3))(3)Ir(CO)H afforded the 5-coordinate Ir(I) complex ((CF(3))PCP)Ir(CO)(PPh(3)) (3). Complex 3 shows mild catalytic activity for the decarbonylation of 2-naphthaldehyde in refluxing diglyme (162 °C).     

Excited-state properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py)

The photophysical properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF = tetrahydrofuran, PPh(3) = triphenylphosphine, py = pyridine) were explored upon excitation with visible light. Time-resolved absorption shows that all the complexes possess a long-lived transient (3.5-5.0 micros) assigned as an electronic excited state of the molecules, and they exhibit an optical transition at approximately 760 nm whose position is independent of axial ligand. No emission from the Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py) systems was detected, but energy transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to the (3)pipi excited state of perylene is observed. Electron transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to 4,4'-dimethyl viologen (MV(2+)) and chloro-p-benzoquinone (Cl-BQ) takes place with quenching rate constants (k(q)) of 8.0 x 10(6) and 1.2 x 10(6) M(-1) s(-1) in methanol, respectively. A k(q) value of 2 x 10(8) M(-1) s(-1) was measured for the quenching of the excited state of Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) by O(2) in methanol. The observations are consistent with the production of an excited state with excited-state energy, E(00), between 1.34 and 1.77 eV.     

Developing Reagents To Orient Fullerene Derivatives. Formation and Structural Characterization of (eta(2)-C(60)O)Ir(CO)Cl(As(C(6)H(5))(3))(2)

In order to obtain crystals of fullerene oxides that are suitable for single-crystal X-ray diffraction, the reactions between C(60)O and Vaska type iridium complexes have been examined. While reaction with Ir(CO)Cl(P(C(6)H(5))(3))(2)(and with triphenylphosphine but not triphenylarsine) results in partial deoxygenation of the fullerene epoxide, reaction with Ir(CO)Cl(As(C(6)H(5))(3))(2)()()produces crystalline (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3). Black triangular prisms of (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3)form in the monoclinic space group P2(1)/n with a = 14.662(2) ?, b = 19.836(2) ?, c = 28.462(5) ?, and beta = 100.318(12) degrees at 123 (2) K with Z = 4. Refinement (on F(2)) of 10 472 reflections and 1095 parameters with 10 restraints yielded wR2 = 0.152 and a conventional R = 0.066 (for 7218 reflections with I > 2.0sigma(I)). The structure shows that the iridium complex is bound to a 6:6 ring junction of the fullerene with four partially occupied sites for the epoxide oxygen atom. Thus, while deoxygenation of the fullerene does not occur upon reaction with Ir(CO)Cl(AsPh(3))(2), there is a greater degree of disorder in (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2)than previously reported for (eta(2)-C(60)O)Ir(CO)Cl(PPh(3))(2).     

Mixed phosphine and group-13 metal ligator complexes [(PR3)(a)M(ECp*)b] (M = Mo, Ni; E = Ga, Al; R = C6H5, cyclo-C6H11, CH3)

Treatment of [Mo(N(2))(PMe(3))(5)] with two equivalents GaCp* (Cp* = η(5)-C(5)(CH(3))(5)) leads to the formation of cis-[Mo(GaCp*)(2)(PMe(3))(4)] (1), while AlCp* did not react with this precursor. In addition, [Ni(GaCp*)(2)(PPh(3))(2)] (2a), [Ni(AlCp*)(2)(PPh(3))(2)] (2b), [Ni(GaCp*)(2)(PCy(3))(2)] (3a), [Ni(GaCp*)(2)(PMe(3))(2)] (3b), [Ni(GaCp*)(3)(PCy(3))] (4) and [Ni(GaCp*)(PMe(3))(3)] (5) have been prepared in high yields by a direct synthesis from [Ni(COD)(2)] and stoichiometric amounts of the ligands PR(3) and ECp* (E = Al, Ga), respectively. All compounds have been fully characterized by (1)H, (13)C, and (31)P NMR spectroscopy, elemental analysis and single crystal X-ray diffraction studies.     

Pyrazolyl-bridged iridium dimers. 18.(1) influence of metal-metal bonding on the geometry of diiridium(II) adducts and hydrido-diiridium complexes formed from the diiridium(I) prototype [Ir(mu-pz)(PPh(3))(CO)](2) (pzH = Pyrazole) by dihydrogen addition or protonation

Slow uptake of molecular dihydrogen by the diiridium(I) prototype [Ir(mu-pz)(PPh(3))(CO)](2) (1: pzH = pyrazole) is accompanied by formation of a 1,2-dihydrido-diiridium(II) adduct [IrH(mu-pz)(PPh(3))(CO)](2) (2), for which an X-ray crystal structure determination reveals that (unlike in 1) the PPh(3) ligands are axial, with the hydrides occupying trans coequatorial positions across the Ir-Ir bond (2.672 A). Reaction with CCl(4) effects hydride replacement in 2, affording the monohydride Ir(2)H(Cl)(mu-pz)(2)(PPh(3))(2)(CO)(2) (3) in which Ir-Ir = 2.683 A. At one metal center, H is equatorial and PPh(3) is axial, while at the other, Cl is axial as is found in the symmetrically substituted product [Ir(mu-pz)(PPh(3))(CO)Cl](2) (4) (Ir-Ir = 2.754 A) that is formed by action of CCl(4) on 1. Treatment of 1 with I(2) yields the diiodo analogue 5 of 4, which reacts with LiAlH(4) to afford the isomorph Ir(2)H(I)(mu-pz)(2)(PPh(3))(2)(CO)(2) (6) of 3 (Ir-Ir = 2.684 A). Protonation (using HBF(4)) of 1 results in formation of the binuclear cation Ir(2)H(mu-pz)(2)(PPh(3))(2)(CO)(2)(+) (7: BF(4)(-) salt), which shows definitive evidence (from NMR) for a terminally bound hydride in solution (CH(2)Cl(2) or THF), but 7 crystallizes as an axially symmetric unit in which Ir-Ir = 2.834 A. Reaction of 7 with water or wet methanol leads to isolation of the cationic diiridium(III) products [Ir(2)H(2)(mu-OX)(mu-pz)(2)(PPh(3))(2)(CO)(2)]BF(4) (8, X = H; 9, X = Me).     

Stabilization of the tautomers HP(OH)2 and P(OH)3 of hypophosphorous and phosphorous acids as ligands

Treatment of [CpRu(PPh(3))(2)Cl] 1 with the stoichiometric amount of H(3)PO(2) or H(3)PO(3) in the presence of chloride scavengers (AgCF(3)SO(3) or TlPF(6)) yields compounds of formula [CpRu(PPh(3))(2)(HP(OH)(2))]Y (Y = CF(3)SO(3) 2a or PF(6) 2b) and [CpRu(PPh(3))(2)(P(OH)(3))]Y (Y = CF(3)SO(3) 3aor PF(6) 3b) which contain, respectively, the HP(OH)(2) and P(OH)(3) tautomers of hypophosphorous and phosphorous acids bound to ruthenium through the phosphorus atom. The triflate derivatives 2a and 3a react further with hypophosphorous or phosphorous acids to yield, respectively, the complexes [CpRu(PPh(3))(HP(OH)(2))(2)]CF(3)SO(3) 4 and [CpRu(PPh(3))(P(OH)(3))(2)]CF(3)SO(3) 5 which are formed by substitution of one molecule of the acid for a coordinated triphenylphosphine molecule. The compounds 2 and 3 are quite stable in the solid state and in solutions of common organic solvents, but the hexafluorophosphate derivatives undergo easy transformations in CH(2)Cl(2): the hypophosphorous acid complex 2b yields the compound [CpRu(PPh(3))(2)(HP(OH)(2))]PF(2)O(2) 6, whose difluorophosphate anion originates from hydrolysis of PF(6)(-); the phosphorous acid complex 3b yields the compound [CpRu(PPh(3))(2)(PF(OH)(2))]PF(2)O(2) 7, which is produced by hydrolysis of hexafluorophosphate and substitution of a fluorine for an OH group of the coordinated acid molecule. All the compounds have been characterized by elemental analyses and NMR measurements. The crystal structures of 2a, 3a and 7 have been determined by X-ray diffraction methods.     

Preparation,structures, and redox and emission characteristics of the isothiocyanate complexes of hexarhenium(III) clusters [Re6(mu3-E)8(NCS)6]4- (E = S,Se)

Hexarhenium(III) complexes with terminal isothiocyanate ligands, [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)(NCS)(6)] (1) and (L)(4)[Re(6)(mu(3)-Se)(8)(NCS)(6)] (L(+) = PPN(+) (2a), (n-C(4)H(9))(4)N(+) (2b)), have been prepared by three different methods. Complex 1 was prepared by the reaction of [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] with molten KSCN at 200 degrees C, while 2b was obtained by refluxing the chlorobenzene-DMF (2:1 v/v) solution of [Re(6)(mu(3)-Se)(8)(CH(3)CN)(6)](SbF(6))(2) and [(n-C(4)H(9))(4)N]SCN. The [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-) anion was also obtained from a mixture of Cs(2)[Re(6)(mu(3)-Se)(8)Br(4)] and KSCN in C(2)H(5)OH by a mechanochemical activation at room temperature for 20 h and isolated as 2a. The X-ray structures of 1 and 2a.4DMF have been determined (1, C(70)H(144)N(10)S(14)Re(6), monoclinic, space group P2(1)/n (No. 14), a = 14.464(7) A, b = 22.059(6) A, c = 16.642(8) A, beta = 113.62(3) degrees, V = 4864(3) A(3), Z = 2; 2a.4DMF, C(162)H(144)N(14)O(4)P(8)S(6)Se(8)Re(6), triclinic, space group P1 (No. 2), a = 15.263(2) A, b = 16.429(2) A, c = 17.111(3) A, alpha = 84.07(1) degrees, beta = 84.95(1) degrees, gamma = 74.21(1) degrees, V = 4098.3(8) A(3), Z = 1). All the NCS(-) ligands in both complexes are coordinated to the metal center via nitrogen site with the Re-N distances in the range of 2.07-2.13 A. The redox potentials of the reversible Re(III)(6)/Re(III)(5)Re(IV) process in acetonitrile are +0.84 and +0.70 V vs. Ag/AgCl for [Re(6)(mu(3)-S)(8)(NCS)(6)](4)(-) and [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-), respectively, which are the most positive among the known hexarhenium complexes with six terminal anionic ligands. The complexes show strong red luminescence with the emission maxima (lambda(max)/nm), lifetimes (tau(em)/micros), and quantum yields (phi(em)) being 745 and 715, 10.4 and 11.8, and 0.091 and 0.15 for 1 and 2b, respectively, in acetonitrile. The data reasonably well fit in the energy-gap plots of other hexarhenium(III) complexes. The temperature dependence of the emission spectra and tau(em) of 1 and [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] are also reported.     

Complexes of gold(I), silver(I), and copper(I) with pentaaryl[60]fullerides

Gold(I), silver(I), and copper(I) phosphine complexes of 6,9,12,15,18-pentaaryl[60]fullerides 1a and 1b, namely, [(4-MeC(6)H(4))(5)C(60)]Au(PPh(3)) (2a), [(4-t-BuC(6)H(4))(5)C(60)]Au(PPh(3)) (2b), [(4-MeC(6)H(4))(5)C(60)]Ag(PCy(3)) (3a), [(4-t-BuC(6)H(4))(5)C(60)]Ag(PPh(3)) (3b), [(4-t-BuC(6)H(4))(5)C(60)]Ag(PCy(3)) (3c), [(4-MeC(6)H(4))(5)C(60)]Cu(PPh(3)) (4a), and [(4-t-BuC(6)H(4))(5)C(60)]Cu(PPh(3)) (4b), have been synthesized and characterized spectroscopically. All complexes except for 3c were also characterized by single-crystal X-ray diffraction. Several coordination modes between the cyclopentadienyl ring embedded in the fullerene and the metal centers are observed, ranging from η(1) with a slight distortion toward η(3) in the case of gold(I), to η(2)/η(3) for silver(I), and η(5) for copper(I). Silver complexes 3a and 3b are rare examples of crystallographically characterized Ag(I) cyclopentadienyls whose preparation was possible thanks to the steric shielding provided by fullerides 1a and 1b, which stabilizes these complexes. Silver complexes 3a and 3b both display unexpected coordination of the cyclopentadienyl portion of the fulleride anion with Ag(I). DFT calculations on the model systems (H(5)C(60))M(PH(3)) and CpMPH(3) (M = Au, Ag, or Cu) were carried out to probe the geometries and electronic structures of these metal complexes.     

Hydrolysis of dinuclear ruthenium complexes [{CpRu(PPh3)2}2(micro,eta(1:1)-L)][CF3SO3]2 (L=P4, P4S3): simple access to metal complexes of P2H4 and PH2SH

The reaction of [CpRu(PPh(3))(2)Cl] (1) with half an equivalent of P(4) or P(4)S(3) in the presence of AgCF(3)SO(3) as chloride scavenger affords the stable dimetal complexes [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(4))][CF(3)SO(3)](2).3 CH(2)Cl(2) (2) and [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(apical)-P(basal)-P(4)S(3))][CF(3)SO(3)](2).0.5 C(7)H(8) (3), in which the tetrahedral P(4) and mixed-cage P(4)S(3) molecules are respectively bound to two CpRu(PPh(3))(2) fragments through two phosphorus atoms. The coordinated cage molecules, at variance with the free ligands, readily react with an excess of water in THF under mild conditions. Among the hydrolysis products, the new, remarkably stable complexes [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(2)H(4))][CF(3)SO(3)](2) (4) and [CpRu(PPh(3))(2)(eta(1)-PH(2)SH)]CF(3)SO(3) (8) were isolated. In the former, diphosphane, P(2)H(4), is coordinated to two CpRu(PPh(3))(2) fragments, and in the latter thiophosphinous acid, H(2)PSH, is coordinated to the metal centre through the phosphorus atom. All compounds were characterised by elemental analyses and IR and NMR spectroscopy. The crystal structures of 2, 3, 4 and 8 were determined by X-ray diffraction.