Spectrofluorometric determination of hydrogen peroxide based on oxidative catalytic reactions of p-hydroxyphenyl derivatives with metal complexes of thiacalix[4]arenetetrasulfonate on a modified anion-exchanger.

The peroxidase-like catalytic activity of metal complexes of thiacalix[4]arenetetrasulfonate (TCAS[4]) on a modified anion-exchanger (Me(n+)-TCAS[4]A-500; Me(n+) = H2, Fe3+, Fe2+, Mn3+, Co3+, Co2+, Cu2+, Zn2+, Ni2+) for the oxidation of p-hydroxyphenyl derivatives to produce fluorescent substances in the presence of hydrogen peroxide has been investigated. Among the Me(n+)-TCAS[4]A-500 tested, Fe(3+)-TCAS[4]A-500 exhibited the highest level of catalytic activity for the oxidation of p-acetoamidophenol in a carbonate buffer solution of pH 10. The catalytic activity of Fe(3+)-TCAS[4]A-500 was then used for the spectrofluorometric determination of hydrogen peroxide. The calibration curve for the Fe(3+)-TCAS[4]A-500 method was linear over a range spanning from 0.1 to 5.0 microg of hydrogen peroxide in a 1.0 ml sample solution.     

Scavenging effects of metal complexes of water-soluble thiacalix[4]arenetetrasulfonate on superoxide anion radicals

The scavenging effects of metal complexes of thiacalix[4]arenetetrasulfonate (Me-TCAS[4], Me=H?, Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) on superoxide anion radicals (O??) generated from the xanthine-xanthine oxidase system were investigated by the nitroblue tetrazolium (NBT) method and electron spin resonance (ESR) spin-trapping method using 5,5-dimethyl-1-pyrroline-N-oxide as a trapping reagent. As a reference, calix[4]arenetetrasulfonate (H?)-CAS[4]), calix[6]arenehexasulfonate (H?-CAS[6]) and calix[8]areneoctasulfonate (H?-CAS[8]) were also examined. The results by the NBT method indicated that Fe3(+)- and Mn3(+)-TCAS[4] exhibited the highest O?? scavenging activity among Me-TCAS[4] and H?-CAS[n] (n = 4, 6, 8) in this study. The IC?? values of Fe3(+)- and Mn3(+)-TCAS[4] for O?? scavenging activity were estimated to be 5.3 and 7.8 μM, respectively, and were almost the same as those of tannin acid, catechin and their derivatives, which are known as very effective scavengers of O??. Scavenging activities were in the order of Fe3(+)- and Mn3(+)-TCAS[4]>Mn2(+)-, Cu2(+)-, and Zn(2+)-TCAS[4]>H(2)-TCAS[4] and H?-CAS[n] (n=4, 6, 8). Each activity of Me-TCAS[4] (Me=Fe3(+), Mn3(+), Mn2(+), Cu2(+), and Zn2(+)) was higher than that of the corresponding metal ion, indicating that H?-TCAS[4] has the ability to raise the activity of the metal ion itself by forming a complex. Also, the ESR spin-trapping method revealed that Fe3(+)- and Mn3(+)-TCAS[4] showed high O?? scavenging activities, similarly to the results by the NBT method.     

Determination of hydrogen peroxide by iron(III) complex of thiacalix[4]arenetetrasulfonate on a modified ion-exchanger with peroxidase-like catalytic activity.

An iron(III) complex of thiacalix[4]arenetetrasulfonate on a modified anion-exchanger (Fe3+-TCAS(A-500)) has shown high peroxidase-like activity at pH 5 - 6 for the reaction of quinoid-dye formation between 3-methyl-2-benzothiazolinone hydrazone and N-(3-sulfopropyl)aniline in the presence of hydrogen peroxide. Utilizing the peroxidase-like activity of Fe3+-TCAS(A-500) for this reaction, a method using Fe3+-TCAS(A-500) was applied for the spectrophotometric determination of hydrogen peroxide. The calibration curve by the method using Fe3+-TCAS(A-500) was linear over the range from 1 to 10 microg of hydrogen peroxide in a 1 ml sample solution. The apparent molar absorptivity for hydrogen peroxide was 2.4 x 10(4) l mol(-1) cm(-1). which was about 80% of that by peroxidase under the same conditions. This determination method of hydrogen peroxide using Fe3+-TCAS(A-500) was applied for the determination of glucose in diluted normal and abnormal control serum I and II.     

Factors influencing mononuclear versus multinuclear coordination in a series of potentially hexadentate acyclic N6 ligands: the roles of flexibility and chelate ring size

The synthesis of the new potentially hexadentate ligands N,N'-bis(2,2'-bipyridin-6-ylmethyl)butane-1,4-diamine (bmbu), N,N'-bis(2,2'-bipyridin-6-ylmethyl)pentane-1,5-diamine (bmpt) and N,N'-bis(2,2'-bipyridin-6-ylmethyl)octane-1,8-diamine (bmot) from the condensation of 2,2'-bipyridine-6-carbaldehyde with the appropriate diamine (butane-1,4-diamine, pentane-1,5-diamine and octane-1,8-diamine, respectively) and subsequent reduction, is reported. Bmet, bmpp and bmbu all form mononuclear complexes with first-row transition metal ions (Co(3+), Fe(2+), Ni(2+), Mn(2+)), and X-ray structures of [Mn(bmet)](ClO(4))(2), [Ni(bmet)](ClO(4))(2), [Fe(bmet)](ClO(4))(2), [Mn(bmpp)](ClO(4))(2)·2MeCN and [Co(bmpp)](ClO(4))(3)·H(2)O are reported. As the aliphatic methylene chain increases in length, formation of dinuclear, and in some cases trinuclear, complexes becomes more pronounced, as evidenced by mass spectral analysis of solutions containing Ni(2+) and bmpt, and Ni(2+), Fe(2+) and Mn(2+) with bmot. The increasing preference for multinuclear complexes with increasing chain length is ascribed to the difficulty of incorporating a medium-sized (8 to 13-membered) chelate ring in a mononuclear complex.     

FTIR, magnetic, 1H NMR spectral and thermal studies of some chelates of caproic acid: inhibitory effect on different kinds of bacteria

A convenient method for the preparation of complexes of the Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Zn2+, ZrO2+, UO2(2+), Zr4+ and Th4+ ions with caproic acid (Hcap) is reported and this has enabled 10 complexes of caproate anion to be formulated: [Cr(cap)3].5H2O, [Mn(cap)2(H2O)2], [Fe(cap)3].12H2O, [Co(cap)2(H2O)2].4H2O, [Ni(cap)2(H2O)2].3H2O, [Zn(cap)2], [ZrO(cap)2].3H2O, [UO2(cap)(NO3)], [Zr(cap)2(Cl)2] and [Th(cap)4]. These new complexes were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid infrared, 1H NMR and UV-vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. It has been found from the elemental analysis as well as thermal studies that the caproate ligand behaves as bidentate ligand and forming chelates with 1:1 (metal:ligand) stoichiometry for UO2(2+), 1:2 for (Mn2+, Co2+, Ni2+, Zn2+, ZrO2+ and Zr4+), 1:3 stoichiometry for (Cr3+ and Fe3+) and 1:4 for Th4+ caproate complexes, respectively, as bidentate chelating. The molar conductance measurements proved that the caproate complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The antibacterial activity of the caproic acid and their complexes was evaluated against some gram positive/negative bacteria.     

Calix[4]arene-based 1,3-diconjugate of salicylyl imine having dibenzyl amine moiety (L): synthesis, characterization, receptor properties toward Fe2+, Cu2+, and Zn2+, crystal structures of its Zn2+ and Cu2+ complexes, and selective phosphate sensing by the [ZnL

A calix[4]arene conjugate bearing salicylyl imine having dibenzyl moiety (L) has been synthesized and characterized, and its ability to recognize three most important essential elements of human system, viz., iron, copper, and zinc, has been addressed by colorimetry and fluorescence techniques. L acts as a sensor for Cu(2+) and Fe(2+) by exhibiting visual color change and for Zn(2+) based on fluorescence spectroscopy. L shows a minimum detection limit of 3.96 ± 0.42 and 4.51 ± 0.53 ppm and 45 ± 4 ppb, respectively, toward Fe(2+), Cu(2+), and Zn(2+). The in situ prepared [ZnL] exhibits phosphate sensing among 14 anions studied with a detection limit of 247 ± 25 ppb. The complexes of Zn(2+), Cu(2+), and Fe(2+) of L have been synthesized and characterized by different techniques. The crystalline nature of the zinc and copper complexes and the noncrystalline nature of simple L and its iron complex have been demonstrated by powder XRD. The structures of Cu(2+) and Zn(2+) complexes have been established by single crystal XRD wherein these were found to be 1:1 monomeric and 2:2 dimeric, respectively, using N(2)O(2) as binding core. The geometries exhibited by the Zn(2+) and the Cu(2+) complexes were found to be distorted tetrahedral and distorted square planar, respectively. The iron complex of L exists in 1:1 stoichiometry as evident from the mass spectrometry and elemental analysis.     

Study of metal ion labeling of the conformational and charge states of lysozyme by ion mobility mass spectrometry

The efficiency of Zn(2+), Cu(2+), Ni(2+), Co(2+), Fe(2+) or Mn(2+) labeling of the conformational and charge states of lysozyme was studied in H(2)O solvent at pH 2.5-6.8. Labeling of lysozyme was conducted with 50 M, 100 M and 500 M excess of the metal ion, resulting in the number of metal ions attached to lysozyme increasing two-fold over this range. At pH 6.2-6.8, Zn(2+), Cu(2+), Ni(2+), Co(2+) and Mn(2+) labeled the highly folded 7+ conformer and the 8+ and 9+ partially unfolded conformers of lysozyme with the same number of metal ion tags, with only Fe(2+) exhibiting no labeling. Lysozyme conserved its charge after metal ion labeling which shows at each charge state the divalent metal ion is replacing two protons. As the pH is lowered to 4.7-5.0 and 2.5-2.9, the labeling of lysozyme by Zn(2+), Cu(2+), Ni(2+), Co(2+) or Mn(2+) decreased in efficiency due to increased competition from protons for the aspartate and glutamate binding sites. The metal ions preferentially labeled the highly folded 7+ and partially unfolded 8+ conformers, but labeling decreased as the charge of lysozyme increased. In contrast to the other metal ions, Fe(2+) exhibited labeling of lysozyme only at the lowest pH of 2.8. At higher pH, the oxidation of Fe(2+) and formation of hydroxy-bridged complexes probably make the Fe(2+) unreactive towards lysozyme.     

Complexes of bivalent metal cations in electrospray mass spectra of common organic compounds

In the standard electrospray ionization mass spectra of many common, low molecular mass organic compounds dissolved in methanol, peaks corresponding to ions with formula [3M + Met](2+) (M = organic molecule, Met = bivalent metal cation) are observed, sometimes with significant abundances. The most common are ions containing Mg(2+), Ca(2+) and Fe(2+). Their presence can be easily rationalized on the basis of typical organic reaction work-up procedures. The formation of [3M + Met](2+) ions has been studied using N-FMOC-proline methyl ester as a model organic ligand and Mg(2+), Ca(2+), Sr(2+), Ba(2+), Fe(2+), Ni(2+), Mn(2+), Co(2+) and Zn(2+) chlorides or acetates as the sources of bivalent cation. It was found that all ions studied form [3M + Met](2+) complexes with N-FMOC-proline methyl ester, some of them at very low concentrations. Transition metal cations generally show higher complexation activity in comparison with alkaline earth metal cations. They are also more specific in the formation of [3M + Met](2+) complexes. In the case of alkaline earth metal cations [2M + Met](2+) and [4M + Met](2+) complex ions are also observed. It has been found that [3M + Met](2+) complex ions undergo specific fragmentation at relatively low energy, yielding fluorenylmethyl cation as a major product. [M + Na](+) ions are much more stable and their fragmentation is not as specific.     

High-nuclearity metal-cyanide clusters: synthesis,magnetic properties,and inclusion behavior of open-cage species incorporating [(tach)M(CN)3] (M = Cr,Fe, Co) complexes

The use of 1,3,5-triaminocyclohexane (tach) as a capping ligand in generating metal-cyanide cage clusters with accessible cavities is demonstrated. The precursor complexes [(tach)M(CN)(3)] (M = Cr, Fe, Co) are synthesized by methods similar to those employed in preparing the analogous 1,4,7-triazacyclononane (tacn) complexes. Along with [(tach)Fe(CN)(3)](1)(-), the latter two species are found to adopt low-spin electron configurations. Assembly reactions between [(tach)M(CN)(3)] (M = Fe, Co) and [M'(H(2)O)(6)](2+) (M' = Ni, Co) in aqueous solution afford the clusters [(tach)(4)(H(2)O)(12)Ni(4)Co(4)(CN)(12)](8+), [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+), and [(tach)(4)(H(2)O)(12)Ni(4)Fe(4)(CN)(12)](8+), each possessing a cubic arrangement of eight metal ions linked through edge-spanning cyanide bridges. This geometry is stabilized by hydrogen-bonding interactions between tach and water ligands through an intervening solvate water molecule or bromide counteranion. The magnetic behavior of the Ni(4)Fe(4) cluster indicates weak ferromagnetic coupling (J = 5.5 cm(-)(1)) between the Ni(II) and Fe(III) centers, leading to an S = 6 ground state. Solutions containing [(tach)Fe(CN)(3)] and a large excess of [Ni(H(2)O)(6)](2+) instead yield a trigonal pyramidal [(tach)(H(2)O)(15)Ni(3)Fe(CN)(3)](6+) cluster, in which even weaker ferromagnetic coupling (J = 1.2 cm(-)(1)) gives rise to an S = (7)/(2) ground state. Paralleling reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], [(tach)Cr(CN)(3)] reacts with [Ni(H(2)O)(6)](2+) in aqueous solution to produce [(tach)(8)Cr(8)Ni(6)(CN)(24)](12+), featuring a structure based on a cube of Cr(III) ions with each face centered by a square planar [Ni(CN)(4)](2)(-) unit. The metal-cyanide cage differs somewhat from that of the analogous Me(3)tacn-ligated cluster, however, in that it is distorted via compression along a body diagonal of the cube. Additionally, the compact tach capping ligands do not hinder access to the sizable interior cavity of the molecule, permitting host-guest chemistry. Mass spectrometry experiments indicate a 1:1 association of the intact cluster with tetrahydrofuran (THF) in aqueous solution, and a crystal structure shows the THF molecule to be suspended in the middle of the cluster cavity. Addition of THF to an aqueous solution containing [(tach)Co(CN)(3)] and [Cu(H(2)O)(6)](2+) templates the formation of a closely related cluster, [(tach)(8)(H(2)O)(6)Cu(6)Co(8)(CN)(24) superset THF](12+), in which paramagnetic Cu(II) ions with square pyramidal coordination are situated on the face-centering sites. Reactions intended to produce the cubic [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+) cluster frequently led to an isomeric two-dimensional framework, [(tach)(H(2)O)(3)Co(2)(CN)(3)](2+), exhibiting mer rather than fac stereochemistry at the [Co(H(2)O)(3)](2+) subunits. Attempts to assemble larger edge-bridged cubic clusters by reacting [(tach)Cr(CN)(3)] with [Ni(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) complexes instead generated extended one- or two-dimensional solids. The magnetic properties of one of these solids, two-dimensional [(tach)(2)(cyclam)(3)Ni(3)Cr(2)(CN)(6)]I(2), suggest metamagnetic behavior, with ferromagnetic intralayer coupling and weak antiferromagnetic interactions between layers.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Synthesis and characterization of heterodinuclear Ln(3+)-Fe3+ and Ln(3+)-Co3+ complexes,bridged by cyanide ligand (Ln3+ = lanthanide ions). Nature of the magnetic interaction in the Ln(3+)-Fe3+ complexes

The reaction of Ln(NO3)3.aq with K3[Fe(CN)6] or K3[Co(CN)6] in N,N'-dimethylformamide (DMF) led to 25 heterodinuclear [Ln(DMF)4(H2O)3(mu-CN)Fe(CN)5].nH2O and [Ln(DMF)4(H2O)3(mu-CN)Co(CN)5].nH2O complexes (with Ln = all the lanthanide(III) ions, except promethium and lutetium). Five complexes (Pr(3+)-Fe3+), (Tm(3+)-Fe3+), (Ce(3+)-Co3+), (Sm(3+)-Co3+), and (Yb(3+)-Co3+) have been structurally characterized; they crystallize in the equivalent monoclinic space groups P21/c or P21/n. Structural studies of these two families show that they are isomorphous. This relationship in conjunction with the diamagnetism of the Co3+ allows an approximation to the nature of coupling between the iron(III) and the lanthanide(III) ions in the [Ln(DMF)4(H2O)3(mu-CN)Fe(CN)5].nH2O complexes. The Ln(3+)-Fe3+ interaction is antiferromagnetic for Ln = Ce, Nd, Gd, and Dy and ferromagnetic for Ln = Tb, Ho, and Tm. For Ln = Pr, Eu, Er, Sm, and Yb, there is no sign of any significant interaction. The isotropic nature of Gd3+ helps to evaluate the value of the exchange interaction.     

A highly selective on/off fluorescence sensor for cadmium(II)

A polypyridyl ligand, 2,3,6,7,10,11-hexakis(2-pyridyl)dipyrazino[2,3-f:2',3'-h]quinoxaline (HPDQ), was found to have excellent fluorescent selectivity for Cd(2+) over many other metal ions (K(+), Na(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Ni(2+), Co(2+), Cu(2+), Ag(+), Hg(2+), Zn(2+), and Cr(3+)) based on the intramolecular charge-transfer mechanism, which makes HPDQ a potential fluorescence sensor or probe for Cd(2+). An obvious color change between HPDQ and HPDQ + Cd(2+) can be visually observed by the naked eye. The structure of the complex HPDQ-Cd has been characterized by X-ray crystallography. Density functional theory calculation results on the HPDQ and HPDQ-Cd complexes could explain the experimental results.     

Characterization of self-assembled supramolecular [Ga4L6] host-guest complexes by electrospray ionization mass spectrometry

Self-assembled supramolecular host-guest complexes have been characterized by electrospray ionization mass spectrometry. The spectra obtained by use of a Q-TOF instrument equipped with a Z-spray ion source show primarily the 3- and 4- charge states of the assemblies. The assemblies have the general formula [guest subset Ga4L6]11- where L represents the chelating bidentate catechol ligand 1,5-bis(2',3'-dihydroxy-benzamido)naphthalene and guests are tetramethyl ammonium (Me4N+), tetraethyl ammonium (Et4N+), tetra-n-propyl ammonium (Pr4N+) and decamethylcobaltocenium (Cp*2Co+) cations. For the first time, the mass spectrum of the empty assembly [Ga4L6]12- is reported. This article also reports that provided the electrospray ion source is capable of preserving noncovalent interactions, it is possible to observe host-guest complexes containing both weak binding guests as well as sterically demanding guests in the mass spectra. The present data suggest that electrospray mass spectrometry is a powerful tool for characterization of supramolecular host-guest complexes.     

Stability constants of some bivalent first row transition metal chelates of dicarboxylic acids containing ether linkages

The stability constants of the Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+) and Zn(2+) complexes with four acids of the type HOOCCH(2)O(CH(2)CH(2)O)(n) CH(2)COOH (n = 0-3) are reported. For n = 0 the constants are in the Irving-Williams order, but not for n = 1-3.     

Complex formation between phytic acid and divalent metal ions: a solution equilibria and solid state investigation

An investigation on the complex formation equilibria between divalent metal ions Me (with Me=Mn, Co, Ni, Cu, Cd, and Pb) and phytic acid (H(12)L) is presented. Experiments were performed through a potentiometric methodology by measuring, at 25 degrees C, the proton and, in some cases (Cu(2+), Cd(2+), and Pb(2+)), also the metal ion activity at equilibrium in solutions containing, besides the metal and the ligand, 3 M NaClO(4) as the ionic medium. Unhydrolyzed solutions of the metal ion at millimolar concentration levels were titrated with solutions of about 10 mM sodium phytate, until the formation of a solid phase took place (always at pH approximately 2.5, except in the case of Cu(2+), which formed soluble complexes up to pH approximately 3.3). Coulometry was employed to produce very dilute solutions of either Cu(2+), Cd(2+), or Pb(2+) of accurately known composition. The emf data were explained by assuming, in the acidity interval explored, the formation of the complexes of general stoichiometry MeH(5)L(5-) and Me(2)H(3)L(5-). Coordination compounds in the solid state were also synthesized and characterized by elemental analysis, thermal analysis, and ICP spectroscopy. The solids had a general stoichiometry Me(6)H (t)LCl (t). x H(2)O, with the following t and x values for each metal investigated: Me ( t; x) = Mn (4; 2); Co (4; 2); Ni (4; 2); Cu (2; 2.5); Zn (2; 1); Sn (6; 6).     

Lower rim 1,3-di{4-antipyrine}amide conjugate of calix[4]arene: synthesis, characterization, and selective recognition of Hg2+ and its sensitivity toward pyrimidine bases

The structurally characterized lower rim 1,3-di{4-antipyrine}amide conjugate of calix[4]arene (L) exhibits high selectivity toward Hg(2+) among other biologically important metal ions, viz., Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ag(+) as studied by fluorescence, absorption, and ESI MS. L acts as a sensor for Hg(2+) by switch-off fluorescence and exhibits a lowest detectable concentration of 1.87 ± 0.1 ppm. The complex formed between L and Hg(2+) is found to be 1:1 on the basis of absorption and fluorescence titrations and was confirmed by ESI MS. The coordination features of the mercury complex of L were derived on the basis of DFT computations and found that the Hg(2+) is bound through an N(2)O(2) extending from both the arms to result in a distorted octahedral geometry with two vacant sites. The nanostructural features such as shape and size obtained using AFM and TEM distinguishes L from its Hg(2+) complex and were different from those of the simple mercuric perchlorate. L is also suited to sense pyrimidine bases by fluorescence quenching with a minimum detection limit of 1.15 ± 0.1 ppm in the case of cytosine. The nature of interaction of pyrimidine bases with L has been further studied by DFT computational calculations and found to have interactions through a hydrogen bonding and NH-π interaction between the host and the guest.     

Structural and electronic characterization of the complexes obtained by the interaction between bare and hydrated first-row transition-metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) and glycine

The complexes formed by the simplest amino acid, glycine, with different bare and hydrated metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) were studied in the gas phase and in solvent in order to give better insight into the field of the metal ion-biological ligand interactions. The effects of the size and charge of each cation on the organization of the surrounding water molecules were analyzed. Results in the gas phase showed that the zwitterion of glycine is the form present in the most stable complexes of all ions and that it usually gives rise to an eta(2)O,O coordination type. After the addition of solvation sphere, a resulting octahedral arrangement was found around Ni(2+), Co(2+), and Fe(2+), ions in their high-spin states, whereas the bipyramidal-trigonal (Mn(2+) and Zn(2+)) or square-pyramidal (Cu(2+)) geometries were observed for the other metal species, according to glycine behaves as bi- or monodentate ligand. Despite the fact that the zwitterionic structure is in the ground conformation in solution, its complexes in water are less stable than those obtained from the canonical form. Binding energy values decrease in the order Cu(2+) > Ni(2+) > Zn(2+) approximately Co(2+) > Fe(2+) > Mn(2+) and Cu(2+) > Ni(2+) > Mn(2+) approximately Zn(2+) > Fe(2+) > Co(2+) for M(2+)-Gly and Gly-M(2+) (H(2)O)(n) complexes, respectively. The nature of the metal ion-ligand bonds was examined by using natural bond order and charge decomposition analyses.     

Studies on catalytic fluorescence formation with peroxidase-like metallotetrakis(N-methylpyridiniumyl) porphyrins

The relative ability of peroxidase-like metallotetrakis(N-methylpyridiniumyl)porphyrins [Me-TMPyP, Me = Mn(III), Fe(III), Co(III), Ni(II), Cu(II), and Zn(II)] to catalyse the hydrogen peroxide oxidation of homovanillic acid to a fluorescent dimer has been studied. The complexes of Mn, Fe and Co are effective catalysts in the reaction, but the complexes of Ni, Cu and Zn are not. The catalytic behaviour of Mn-TMPyP, Fe-TMPyP and Co-TMPyP has been compared with that of HRP in both enzymatic and kinetic analysis. The sequence of peroxidase-like catalytic activity is Mn-TMPyP> Co-TMPyP> Fe-TMPyP. The catalytic activity of Mn-TMPyP is 84% of that of HRP. These Me-TMPyP (Me = Mn, Fe, and Co) compounds are good substitutes for HRP in enzymatic analysis. Traces of hydrogen peroxide and glucose can be determined with the Me-TMPyP systems.     

Experimental and computational studies of selective recognition of Hg2+ by amide linked lower rim 1,3-dibenzimidazole derivative of calix[4]arene: species characterization in solution and that in the isolated complex, including the delineation of the nanostructures

Amide linked lower rim 1,3-dibenzimidazole derivative of calix[4]arene, L has been shown to be sensitive and selective to Hg(2+) in aqueous acetonitrile solution based on fluorescence spectroscopy, and the stoichiometry of the complexed species has been found to be 1:1. The selectivity of L toward Hg(2+) has been shown among 11 M(2+) ions, viz., Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ca(2+), and Mg(2+) studied, including those of the mercury group and none of these ions impede the recognition of Hg(2+) by L. Role of the solvent on the recognition of Hg(2+) has been demonstrated. The role of calix[4]arene platform and the benzimidazole moieties in the recognition of Hg(2+) by L has been delineated upon performing such studies with five different molecules of relevance as reference molecular systems. The binding cores formed by the receptor L and the reference compounds have been established based on the single crystal XRD structures, and the preferential metal ion binding cores have been discussed. The binding of Hg(2+) with L has been further established based on (1)H and (13)C NMR, ESI MS, absorption, and fluorescence lifetime measurements. Some of these techniques have been used to establish the stoichiometry of the species formed. The complex species formed between L and Hg(2+) have been isolated and characterized and found to be 1:1 species even in the isolated complex. Whereas transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) provided the nanostructural behavior of L, the TEM and SEM demonstrated that the mercury complex has different characteristics when compared to L. The TEM, SEM, and powder XRD studies revealed that whereas L is crystalline, that of the mercury complex is not, perhaps a reason for not being able to obtain single crystals of the complex. Binding characteristics of Hg(2+) toward L have been established based on the DFT computational calculations.