New deoxygenative transformations; reactions of (CO)4Fe[Si(CH3)3]2 with acyclic ethers

The reaction of cis-(CO)₄Fe[Si(CH₃)₃]₂ (I) with CH₃OSi(CH₃)₃ and C₆H₅CH₂-OSi(CH₃)₃ at 80°C affords good yields of [(CH₃)₃Si]₂O and the deoxygenation products RSi(CH₃)₃ (R = CH₃, C₆H₅CH₂). These reactions are proposed to occur via (CO)₄Fe(R)Si(CH₃)₃ intermediates. This is supported by the observed formation of cis-(CO)₄Fe(CH₃)Si(CH₃)₃ (II) during the more rapid reaction of I with (CH₃)₂O; subsequent (CH₃)₄Si elimination occurs. With (C₆H₅CH₂)₂O, I reacts at 80°C to yield C₆H₅CH₂Si(CH₃)₃ and C₆H₅CH₂OSi(CH₃)₃ as primary products. With C₆H₅CH₂OCH₃, I effects regioselective benzyl---oxygen bond cleavage.     

Internally coordinated organozinc-transition metal compounds. Crystal structure of (CH3)2N(CH2)3ZnW(ν-C5H5)(CO)3

The stabilities of simple and internally coordinated organozinc-transition metal compounds towards disproportionation have been investigated by the microwave titration technique. Simple alkyl- and aryl-derivatives disproportionate to such an extent as to preclude isolation. Internal coordination was found to stabilize the asymmetric compounds, and several derivatives containing the dimethylaminopropyl group were isolated. The crystal structure of one of them, Me₂N(CH₂)₃-ZnW(Cp)(CO)₃, was determined by a single-crystal X-ray study. The crystals are orthorhombic, space group P2₁2₁2₁, with four molecular units in a cell with parameters a 8.406(1), b 12.179(2) and c 16.642(2) Å. The structure was solved by standard Patterson and Fourier techniques. The refinement, with anisotropic temperature factors for the two heavy atoms, converged at R_F = 0.092 (R_wF = 0.089) for 1536 observed reflections with I>2.5σ(I). The molecule consists of a central tungsten atom, surrounded in a tetragonal pyramidal fashion by a cyclopentadienyl group in the apical position and three carbon monoxyde molecules and a zinc atom occupying the basal positions. The zinc atom is three-coordinate, being surrounded by the tungsten atom and the chelating dimethylaminopropyl group; there is, however, a short intermolecular contact between zinc and a carbonyl oxygen atom at 2.61(3) Å.     

The enthalpies of formation of CH3Mn(CO)5 and of CH3Re(CO)5, and the strengths of the CH3Mn and CH3Re bonds

From measurements of the heats of iodination of CH₃Mn(CO)₅ and CH₃Re(CO)₅ at elevated temperatures using the ‘drop’ microcalorimeter method, values were determined for the standard enthalpies of formation at 25° of the crystalline compounds: ΔH^o_f[CH₃Mn(CO)₅, c] = ?189.0 ± 2 kcal mol^?1 (?790.8 ± 8 kJ mol^?1), ΔH^o_f[Ch₃Re(CO)₅,c] = ?198.0 ± kcal mol^?1 (?828.4 ± 8 kJ mo^?1). In conjunction with available enthalpies of sublimation, and with literature values for the dissociation energies of MnMn and ReRe bonds in Mn₂(CO)₁₀ and Re₂(CO)₁₀, values are derived for the dissociation energies: D(CH₃Mn(CO)₅) = 27.9 ± 2.3 or 30.9 ± 2.3 kcal mol^?1 and D(CH₃Re(CO)₅) = 53.2 ± 2.5 kcal mol^?1. In general, irrespective of the value accepted for D(MM) in M₂(CO)₁₀, the present results require that, D(CH₃Mn) = $\text{1}\text{2}$D(MnMn) + 18.5 kcal mol^?1 and D(CH₃Re) = $\text{1}\text{2}$D(ReRe) + 30.8 kcal mol^?1.     

Preparation of some complexes of the type (C6H5)3P[(CH3)2AsCH2CH(R)CH2As(CH3)2] M(CO)3 (M = Mo or W,R = H or C(CH3)3)

The title compounds, which contain six-membered chelate rings locked in the chair conformation, have been prepared by the reaction of (C₆H₅)₃P with the appropriate tetracarbonyl derivative in refluxing mesitylene.     

Syntheses and structural studies on two cycloruthenapentadienyl complexes: [(CO)3RuC4(CH2OH)4]Ru(CO)3·H2O and [(CO)3RuC4(CH2CH2OH)2(C2H5)2]Ru(CO)3

Syntheses and single-crystal X-ray diffraction studies have been completed on two cycloruthenapentadienyl (CO)₆Ru₂L₂ derivatives, with L = CH₂OHC = CCH₂OH and C₂H₅C=CCH₂CH₂OH respectively. Crystal data are as follows: for [(CO)₃RuC₄(CH₂OH)₄]Ru(CO)₃·H₂O, P2₁/c, a 13.72(1), b 9.501(4), c 14.86(1) Å, β 101.10(6)°, R_w = 0.052 for 1911 reflections; for [(CO)₃RuC₄(CH₂CH₂OH)₂(C₂H₅)₂]Ru(CO)₃, P2₁/c, a 9.191(3), b 16.732(4), c 14.903(3) Å, β 113.61(4)°, R_w = 0.042 for 2865 reflections. Both compounds are built up from binuclear units, each unit being regarded as a Ru(CO)₃ fragment π-bonded to a cycloruthenapentadienyl ring. The molecular parameters are compared with those of known cyclometallapentadienyl complexes of transition metals. The presence of a semi-bridging CO group is discussed.     

Preparation and properties of (η-C5H5)2ZrCl[Si(CH3)3] and (η-C5H5)2Zr[Si(CH3)3]2; trimethylsilyl group transfer from mercury to zirconium

Two silyl-zirconium compounds (η-C₅H₅)₂ZrCl[Si(CH₃)₃] (I) and (η-C₅H₅)₂-Zr[Si(CH₃)₃]₂ (II), have been prepared by the reaction of (η-C₅H₅)₂ZrCl₂ with Hg[Si(CH₃)₃]₂ in refluxing benzene. While I is unreactive toward 1-hexyne (55–60°C) and CO (350 psi), the zirconiumsilicon bond is cleaved by electrophiles such as Cl₂, HgCl₂, and AlCl₃.     

Actinide-centered cyclometalation chemistry. An unusually distorted thorium bishydrocarbyl: Thp[η5-(CH3)5C5]2CH2Si(CH3)3]2

The crystal and molecular structure of the complex Th[η⁵-(CH₃)₅C₅]₂[CH₂-Si(CH₃)₃]₂, which undergoes facile intramolecular cyclometalation to the thoracyclobutane Th[η⁵-(CH₃)₅C₅]₂(CH₂)₂Si(CH₃)₂, is reported. While the Th[η⁵-(CH₃)₅C₅]₂ ligation is unexceptional, the Th[CH₂Si(CH₃)₃]₂ fragment is highly unsymmetrical having Th-C (corresponding angle Th-C-Si) 2.51(1) Å (132.0(6)°) and 2.46(1) Å (148.0(7)°). This conformation, which appears to result from severe intramolecular non-bonded contacts, allows a methyl hydrogen atom of one CH₂Si(CH₃)₃ ligand to approach within ca. 2.3 Å of the α-carbon atom of the other CH₂Si(CH₃)₃ ligand.     

Synthesis and characterisation of HRuRh3(CO)12. Crystal structures of HRuRh3(CO)12, HRuRh3(CO)10(PPh3)2 and HRuCo3(CO)10(PPh3)2

A new ruthenium-rhodium mixed-metal cluster HRuRh₃(CO)₁₂ and its derivatives HRuRh₃(CO)₁₀(PPh₃)₂ and HRuCo₃(CO)₁₀(PPh₃)₂ have been synthesized and characterized. The following crystal and molecular structures are reported: HRuRh₃(CO)₁₂: monoclinic, space group P2₁/c, a 9.230(4), b 11.790(5), c 17.124(9) Å, β 91.29(4)°, Z = 4; HRuRh₃(CO)₁₀(PPh₃)₂·C₆H₁₄: triclinic, space group P$\text{1}$, a 11.777(2), b 14.079(2), c 17.010(2) Å, α 86.99(1), β 76.91(1), γ 72.49(1)°, Z = 2; HRuCo₃(CO)₁₀(PPh₃)₂·CH₂Cl₂: triclinic, space group P$\text{1}$, a 11.577(7), b 13.729(7), c 16.777(10) Å, α 81.39(4), β 77.84(5), γ 65.56°, Z = 2. The reaction between Rh(CO)₄^? and (Ru(CO)₃Cl₂)₂ tetrahydrofuran followed by acid treatment yields HRuRh₃(CO)₁₂ in high yield. Its structural analysis was complicated by a 80–20% packing disorder. More detailed structural data were obtained from the fully ordered structure of HRuRh₃(CO)₁₀(PPh₃)₂, which is closely related to HRuCo₃(CO)₁₀(PPh₃)₂ and HFeCo₃(CO)₁₀(PPh₃)₂. The phosphines are axially coordinated.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

The molecular structure of the complex trimethylaluminium dimethyl ether, (CH3)3AlO(CH3)2, determined by gas phase electron diffraction

The molecular structure of (CH₃)₃AlO(CH₃)₂ has been determined by gas phase electron diffraction. The main molecular parameters are AlC = 1.973(11), AlO = 2.014(14), OC = 1.436(3) Å, OAlC = 98.7(1.5), AlOC = 122.6 (0.5) and COC = 114.5(1.7)°. The OC bond distance and the COC valence angle are significantly larger than those in free dimethyl ether. The three valencies of the oxygen atom appear to lie in one plane. It is suggested that the planarity of the oxygen atom is due to across-angle repulsion Al?C(O).     

Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Re4(CO)12[μ3-InRe(CO)5]4 und Re2(CO)8[μ-InRe(CO)5]2-cluster aus dem reaktionssystem In/Re2(CO)10 in xylol

The thermally stable solids Re₂(CO)₈[μ-InRe(CO)₅]₂ and Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ could be obtained by treatment of In with Re₂(CO)₁₀ in a bomb tube. A mechanism of the formation of the latter cluster from the first one is proposed. Compared with Re₂(CO)₈[μ-InRe(CO)₅]₂, Re₄(CO)₁₂[μ₃_InRe(CO)₅]₄ shows in polar solvents an unusual high stability, which can be explained by the higher coordination number of In with rhenium carbonyl ligands. Re₄(CO)₁₂-[μ₃-InRe(CO)₅]₄ dissolves monomerically in acetone, where as Re₂(CO)₈[μ-InRe(CO)₅]₂ dissociates yielding Re(CO)₅^? anions. Single-crystal X-ray analyses of Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ establish the metal skeleton. The central molecular fragment Re₄(CO)₁₂ contains a tetrahedral arrangement of four bonded Re atoms [ReRe 302.8 (5) pm]. The triangles of this fragment are capped with a μ₃-InRe(CO)₅ group each [InRe(terminal) 273.5 (7) pm; InRe (polyhedral) 281.8 (7) pm]. The bridging type of In atoms with the Re₄ tetrahedron and the metal skeleton was realized for the first time. By treating Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ with Br₂ the existence of Re(CO)₅ ligands could be proved by isolating BrRe(CO)₅.     

Kristall- und molekülstruktur vonzwei metallcarbonyl-derivaten des PH3: (CO)3Cr(PH3)3 und (CO)5Cr(PH3)

The structures of two carbonylphosphine complexes of chromium were determined by X-ray analysis. cis-Tricarbonyltriphosphinechromium(0), [(CO)₃(PH₃)₃Cr], crystallizes in space group P2₁/m with a = 6.90± 0.01, b = 11.29±0.02, c = 6.41±0.01 Å, β = 93.80±0.08°, Z=2. The structure was solved by conventional methods and refined by least squares (R₁ = 0.056). The idealized octahedral molecule shows approximate C_3v, symmetry. The mean CrP-distance is 2.346±40.003 Å. Pentacarbonylphosphinechromium, [(CO)₅(PH₃)Cr], crystallizes in spacegroup Pnma with a = 12.23±0.02, b = 11.33±0.02, c = 6.61 ±0.01 Å, Z = 4. Cell dimensions and structural parameters are very similar to those of hexacarbonylchromium(0). In the crystal the PH₃ group is disordered over three mutually cis-positions of the coordination octahedron.     

Structure, 31P and 13C chemical shift anisotrophy of (CH3)3P, (CH3)3PO, (CH3)3PS and (CH3)3PSe as determined by liquid crystal NMR spectroscopy

The ¹³P and ¹³C spectra of the triply ¹³C labelled molecules (CH₃)₃P, (CH₃)₃PO, (CH₃)₃PS and (CH₃)₃PSe oriented in a nematic phase are reported. The CPC bond angles have been measured. The ¹³P chemical shift tensor shows a large anisotropy except in the case of (CH₃)₃P. The abnormal large value observed for the PSe bond length suggests a large anisotropy of the ¹J(PSe) spin coupling.     

Die Kristallstruktur von (CH3)2GaC5H5

Dimethyl(cyclopentadienyl gallium, (CH₃)₂GaC₅H₅, crystallizes with monoclinic symmetry in space group P2₁/c; the cell dimensions are a = 6.587(3), b = 9.154(3), c = 12.756(5) Å and β = 113.20(3)^o with Z = 4. The structure was solved using heavy atom techniques and refined by least-squares techniques to give a value of R = 0.046 for the 1719 observed reflections. The structure consists of chains of dimethylgallium-groups bridged by cyclopentadienyl rings along the b-axis. Each gallium atom has a distorted tetrahedral environment with Ga-methyl distances of 1.965 Å and Ga-Cp distances of 2.215 and 2.314 Å, respectively.     

The molecular structures of H2Os3(CO)10, H(SC2H5)Os3(CO)10 and (OCH3)2Os3(CO)10

X-ray crystallographic analyses of H₂Os₃(CO)₁₀, H(SC₂H₅)Os₃(CO)₁₀ and (OCH₃)₂Os₃(CO)₁₀ are reported. Although hydrogen atom positions have not been located, the essential isostructural nature of the three commplexes establishes the hydride ligands as bridging two metal atoms, separated by 2.670 Å, with a formal bond order of two; the bridging hydrido- and thiolato-ligands span an osmium---osmium bond of length 2.863 Å and formal bond order one; the two μ-methoxy ligands bridge two metal atoms separated by 3.078 Å which, by simple 18 electron rule counting, has a metal---metal bond order of zero. Some general comments are made on the structures of polynuclear transition metal carbonyls.     

Protolyses of (CH3)3SnM(CH3)3 (M = Sn,Ge, Si,C)

Product and kinetic studies on the reactions of hydrogen chloride in methanol solution with the substrates (CH₃)₃SnM(CH₃)₃ (M = Sn; Ge and Si) show that both SnM and SnCH₃ cleavage reactions occur, at similar rates, and are followed by other reactions giving complex but explicable mixtures of products. Similar behaviour is observed for trifluoroacetolysis in carbon tetrachloride solution, and some intermediates are observable. Trifluoroacetolysis of (CH₃)₃SnC(CH₃)₃ results in exclusive SnCH₃ cleavage. The very slow apparent solvolysis in acetic acid solution is thought to involve reaction with dissolved oxygen.     

Rate constant of unimolecular decomposition of the radical (CH3)2juvyCCH(CH3)2

The energy of activation of CH ₃ ^. radical rupture from the radical (CH₃)₂juvyCCH(CH₃)₂ is 142.2 kJ mol^–1; the selfcombination rate constant is k_c {(CH₃)₂juvyCCH(CH₃)₂}=10^7.3 dm³ mol^–1 s^–1.

---

CH ₃ ^. (CH₃)₂juvyCCH(CH₃)₂ 142,2 /, k_c {(CH₃)₂juvyCCH(CH₃)₂}=10^{7,3 3–1 –1}.

     

Geometries and properties of bimetallic phosphido-bridged complex Cp(CO)2W(μ-PPh2)W(CO)5 and Cp(CO)3W(μ-PPh2)W(CO)5

Complete geometry optimizations were carried out by HF and DFT methods to study the molecular structure of binuclear transition-metal compounds (Cp(CO)₃W(μ-PPh₂)W(CO)₅) (I) and (Cp(CO)₂W(μ-PPh₂)W(CO)₅) (II). A comparison of the experimental data and calculated structural parameters demonstrates that the most accurate geometry parameters are predicted by the MPW1PW91/LANL2DZ among the three DFT methods. Topological properties of molecular charge distributions were analyzed with the theory of atoms in molecules. (3, −1) critical points, namely bond critical point, were found between the two tungsten atoms, and between W1 and C10 in complex II, which confirms the existence of the metal–metal bond and a semi-bridging CO between the two tungsten atoms. The result provided a theoretical guidance of detailed study on the binuclear phosphido-bridged complex containing transition metal–metal bond, which could be useful in the further study of the heterobimetallic phosphido-bridged complexes.     

Improved syntheses of Ru(CO)2 (O3SCF3)2 (bidentate) complexes and their conversion into new [Ru(CO)2 (bidentate)2]2+ complexes

Reaction of the complexes Ru(CO)₂Cl₂L [L = 2,2′-bipyridyl (bpy) or 1,10-phenanthroline (phen)] with trifluoromethanesulphonic acid under carefully controlled conditions yields Ru[cis-(CO)₂] [cis-(O₃SCF₃)₂] (bidentate complexes. From reactions of the trifluoromethanesulphonates with the appropriate bidentate ligands, the new complexes [cis-Ru(CO)₂-L(L′)]²⁺ (L as above; L′ = 4,4′-dimethyl-2,2′-bipyridyl or 4,4′-diisopropyl-2,2′-bipyridyl) as well as the known [_cis-Ru(CO)₂L₂]²⁺ and [cis-Ru(CO)₂bpy(phen)]²⁺ have been prepared.