Electrostatic potential mapping of polycyclic aromatic hydrocarbon diol epoxides using a dipole

Electrostatic potential maps of benz(a)anthracene diol epoxide, benzphenanthrene diol epoxide, chrysene diol epoxide, and tryphenylene diol epoxide, which are ultimate carcinogens derived from the corresponding polycyclic aromatic hydrocarbons, have been studied using a dipole of length 1 Å and strength 1 Debye. The net charge distributions in the molecules were obtained using the MNDO molecular orbital method. The maps were drawn for two closest distances of approach between the charged ends of the dipole and atoms of the molecules. Using the electric field directions and values of electrostatic potentials, reactive sites and relative reactivities of these molecules have been examined. Existence of a bay region appears to be important for the carcinogenic activity of a diol epoxide in this class of carcinogens.     

Correlation of delocalization indices and current-density maps in polycyclic aromatic hydrocarbons

Using multicentre delocalization indices, the ring current maps of a large set of polycyclic aromatic hydrocarbons (PAH) are reconstructed and compared with ab initio computations of the same maps in the pseudo-pi version of the ipsocentric approach to magnetic response. The quality of the comparison indicates that both delocalization and ring current approaches capture the same information about the aromatic nature of the PAH. Aromaticity as a global property, requires knowledge of more than single circuits, but the present results suggest no need to introduce a "multidimensional character" for aromaticity.     

Model quantum chemical studies of the electronic structure and aspects of reactivity of diol epoxides of aromatic hydrocarbons

This paper offers a unified presentation of the main ring conformers of the diol expoxides, triol carbonium ions, and tetrols related to the “bay-region” benzo ring of carcinogenic metabolites of PAH and brings forward quantitative information through ab initio SCF computations about their relative energies. It substantiates and evaluates the energy of the syn epoxide-OH4 hydrogen bond and, on the contrary, refutes the significance of an O ?H? O or an O^? ?H? O bond in the triol carbonium ions. It provides an explanation for the similar rates of acid-catalyzed hydrolysis of the syn and anti diol expoxides. It evaluates the stabilization of the triol carbonium ions due to the presence of a neighboring double bond and accounts for the spontaneous opening of protonated epoxides. Finally it accounts for cis hydrolysis of the syn diol epoxide and trans hydrolysis of the anit diol epoxide under acid conditions.     

Local aromaticity in polycyclic aromatic hydrocarbons: electron delocalization versus magnetic indices

The local aromaticity of benzenoid rings is examined by means of the Polansky index (P) and generalized population analysis (GPA). The results are found to agree very well with recently published circuit-condensed ring currents and magnetic-energetic aromaticity indices, but no correlation is found with nucleus independent chemical shifts (NICS). This is usually seen as a manifestation of the more general multidimensional nature of aromaticity. This paper examines the sources for the observed correlations, showing that some indices give conflicting results because they inherently reflect different phenomena.     

Determination of average molecular polarizabilities of polycyclic aromatic hydrocarbons directly from retention indices

Summary A significant correlation has been found between the retention indices of polycyclic aromatic hydrocarbons on non-polar stationary phases and the average molecular polarizabilities of the molecules separated on these phases. Equations have been derived for the determination of the average molecular polarizabilities, directly from the retention indices.     

Multidimensionality of delocalization indices and nucleus independent chemical shifts in polycyclic aromatic hydrocarbons

The aromaticity and local-aromaticity of a large set of polycyclic aromatic hydrocarbons (PAHs) is studied using multicenter delocalization indices from generalized population analysis and the popular nucleus independent chemical shift (NICS) index. A method for the fast computation of the NICS values is introduced, using the so-called pseudo-pi-method. A detailed examination is made of the multidimensional nature of aromaticity. The lack of a good correlation between the NICS and the multicenter delocalization indices is reported and the grounds discussed. It is shown through a thorough statistical analysis that the NICS values arise not only from local aromaticity of the benzenoid rings, but also from other circuits. It is shown that the NICS indices do not reveal the individual aromatic nature of a specific ring, contrary to the delocalization indices.     

多环芳烃水中溶解度的理论计算

建立了计算多环芳烃水中溶解度的数学表达式，用量子化学方法计算了7个多环芳烃的水中溶解度，计算结果与实验测定结果相符合．多环芳烃处于水体内体系状态能量愈高，其溶解度愈小，多环芳烃中的碳氢基团越多，溶解度越小．此时体系中的溶质呈单分子态，而不是聚集态．     

Palladium-catalyzed pentannulation of polycyclic aromatic hydrocarbons

We present a new and versatile one-step synthesis of a series of small molecular chromophores based on cyclopentannulated polycyclic aromatic hydrocarbons (PAH). Easily available pyrene, anthracene, and perylene bromides serve as starting materials for the reactions. The formation of the five-membered ring is achieved by the straightforward palladium(0)-catalyzed carbannulation with various substituted acetylenes. This approach is applicable either to single or multiple annulation procedures leading to hitherto inaccessible PAH topologies. According to the resulting products of the diverse reactions, a mechanistic explanation is proposed. UV/Vis absorption as well as cyclovoltammetric measurements were performed for characterization demonstrating the value of this annulation technique. Optical absorptions of up to 780 nm and absorption coefficients ranging from 8000 to 34,000 M(-1) cm(-1) were detected.     

Simplified determination of polycyclic aromatic hydrocarbons

Accurate quantitative analysis for selected polycyclic aromatic hydrocarbons present on urban dust can be obtained by using a simple procedure consisting of sonic-probe extraction with cyclohexane; clean-up with Florisil((R))-XAD-4((R)), and measurement by high-resolution gas chromatography with flame-ionization detection (HRGC/FID). The analysis can be further simplified by eliminating the clean-up step if HRGC/electron-impact mass-spectrometry (MS) is available. Both the FID and MS methods give results consistent with those obtained by standard procedures. The direct HRGC/MS procedure, combined with chemical ionization, can also be applied to the determination of polycyclic organic materials present in solvent-refined coal, shale oil and crude oil.     

Analysis of nitrated polycyclic aromatic hydrocarbons

Many nitrated polycyclic aromatic hydrocarbons (NPAH) that are present in low concentrations in the environment and in emission sources have been shown to be mutagenic and/or carcinogenic. This paper reviews the current methods of analysis of these compounds with the emphasis on NPAH measurements in ambient particulate matter samples.     

A new yardstick for benzenoid polycyclic aromatic hydrocarbons

The newly introduced signature of benzenoids (a sequence of six real numbers Si with i = 6-1) shows the composition of the pi-electron partition by indicating the number of times all rings of the benzenoid are assigned 6, 5, 4, 3, 2, or 1 pi-electrons. It allows the introduction of a new ordering criterion for such polycyclic aromatic hydrocarbons by summing some of the terms in the signature. There is an almost perfect linear correlation between sums S6 + S5 and S4 + S3 for isomeric cata- or peri-fused benzenoids, so that one can sort such isomers according to ascending s 6 + S5 or to descending S4 + S3 sums (the resulting ordering does not differ much and agrees with that based on increasing numbers of Clar sextets and of Kekule structures). Branched cata-condensed benzenoids have higher S6 + S5 sums than isomeric nonbranched systems. For nonisomeric peri-condensed benzenoids, both sums increase with increasing numbers of benzenoid rings and decrease with the number of internal carbon atoms. Other partial sums that have been explored are S6 + S5 + S3 And S6 + S2 + S1, and the last one appears to be more generally applicable as a parameter for the complexity of benzenoids and for ordering isomeric benzenoids.     

Detector for particulate polycyclic aromatic hydrocarbons in water

It is estimated that most polycyclic aromatic hydrocarbons (PAHs) in environmental water are not dissolved but rather in particulate form. Nevertheless, the currently available optical detectors are not suited for proper sampling of solid PAHs. A new setup for direct sampling and quantification of suspended particulate PAHs in water is suggested. It is based on a polymeric film that has the capability of dissolving PAH particulates, coupled to a traditional laser-induced fluorescence probe. Kinetics and performance of two sampling modes have been studied: bulk sampling, by immersing the probe into the water, and surface sampling, by laying the film on the water surface. The latter method has proved to be more sensitive; however, it is diffusion-limited. Linear calibration plots have provided quantification over a wide concentration range with detection limits in the ppb range (these could be improved by using a modified probe). The effects due to other particulates in water have been studied and only little interferences have been observed. The possibility of analysis of PAH mixtures has been addressed and it has been concluded that multivariate analysis is needed.     

Standard reference materials for the determination of polycyclic aromatic hydrocarbons

Summary Since 1980 a number of Standard Reference Materials (SRM's) have been issued by the National Bureau of Standards (NBS) to assist in validating measurements for the determination of polycyclic aromatic hydrocarbons (PAH) and other polycyclic aromatic compounds (PAC). These SRM's are certified for selected PAC and range in analytical difficulty from calibration solutions to complex natural matrix materials, such as air and diesel particulate matter, shale oil, and crude oil. In the past year three new SRM's have been introduced: (1) SRM 1647a Priority Pollutant PAH in Acetonitrile, (2) SRM 1491 Aromatic Hydrocarbons in Hexane/Toluene, and SRM 1597 Complex Mixture of PAH from Coal Tar. The SRM's available from NBS for use in the determination of PAC are described and the concentrations of PAC determined in the natural matrix SRM's are summarized and compared. The primary analytical techniques used for the measurement of PAC in these SRM's were gas chromatography, liquid chromatography, and gas chromatography/mass spectrometry.

---

Standardreferenzmaterialien für die Bestimmung von polycyclischen aromatischen Kohlenwasserstoffen

     

Enthalpies of formation of polycyclic aromatic hydrocarbons

Comparison of the experimental enthalpies of formation of 77 polycyclic aromatic hydrocarbons with those calculated by semiempirical quantum-chemical methods showed that the AM1 approximation ensures the best agreement between the experimental and calculated values. The enthalpies of formation of 60 compounds of this series were calculated using the AM1 method and the corresponding linear regression equation.     

Method for determination of polycyclic aromatic hydrocarbons by fluorodensitometry

A TLC fluorodensitometric method for the determination of total PAHs in aqueous and hydroalcoholic solutions at the parts per billion level has been developed. The PAHs are extracted into cyclohexane and separated as a class on a chemically bonded reversed-phase TLC plate using stepwise development. In the fluorescence scanning of the plate the PAHs are located by reference to a mixture of 16 PAHs designated by EPA as primary pollutants and measured as benzo(a)pyrene.     

The spectrophotometric determination of polycyclic aromatic hydrocarbons

The determination of polycyclic aromatic hydrocarbons by elution chromatography from alumina columns followed by ultra-violet spectrophotometry has been elaborated for a more extended range of substances than has been published previously. The methods have been standardised and tables of absorption peaks are provided for easy identification of a number of compounds commonly found as traces in combustion products. Recommendations are given for the preparation of samples for determinations by this method, which has been successfully employed for the analysis of carbon blacks, soots, urban air solids, condensible smokes such as tobacco smoke, wood smoke and coal tar. thermal decomposition or pyrolysis products and other substances, such as urban vegetation, soil, tobacco, snuff, smoked food, and surface drainage water, which have been subjected to the action of smokes or other combustion products.     

Heat capacities of liquid polycyclic aromatic hydrocarbons

Liquid heat capacities of 14 aromatic hydrocarbons were measured using a DSC calorimeter. Measurements were performed in the temperature range 100 K above the melting temperature of each hydrocarbon. The lowest and highest temperatures considered were respectively 303 and 692 K. Experimental results were correlated using Benson's group contribution approach. The group parameters determined allow the experimental results to be represented to within 2%.