An approach to the enantiocontrolled synthesis of pseudomonic acids via a novel mono—claisen rearrangement

A short, efficient approach to a key chiral intermediate for the synthesis of pseudomonic acids A and C is delineated.Pseudomonic acids A($\text{1a}$), B($\text{1b}$), and C($\text{2}$) are members of a novel of “C-glycopyranoside” antimicrobial agents which have recently attracted synthetic attetion.² Presently, we wish to report a short efficient stratedy towards the total synthesis of opticaly active pseudomonic acids. The sequence is highlighted by a novel controlled mono-Claisen rearrangement and a highly regioselective π-allylpalladium mediated displacement.Diacetyl-(L)-arabinal ($\text{3}$)³ was converted to the bis-ketenesilylacetal $\text{4}$ and warmed to 60°C according to the Ireland ester-enolate Claisen rearrangement method.⁴ Over a period of ≈5h, smooth conversion to a major rearranged product $\text{5}$ was observed by 300 MHz NMR. The identity of $\text{5}$ was confirmed by direct desilylation and methylation (KF, KHCO₃, H₂O, HMPA, CH₃I). After flash chromatography, compound $\text{7}$ was isolated in 55% overall yield from $\text{3}$. Careful inspection of the crude methylation product revealed the presence of ≈5% doubly rearranged product $\text{6}$.The rearrangement of $\text{4}$ to $\text{5}$ is a unique example of a selective mono-Claisen rearrangement in which the rate of a second similar Claisen rearrangement ($\text{5}$ → $\text{6}$) is much slower under the reaction conditions. Although the reasons for this interesting selectivity are unclear at this time,⁵ in practice, the mono-Claisen rearrangement obviates the need for selective differentiation of the two hydroxyl groups, a difficult task at best, in this case.Palladium mediated allylic acetate displacement provided an ideal method for introduction of a second chemodifferentiated side chain with allylic retention and retention of stereochemistry. Alkylation of $\text{7}$ with sodiothylmalonate using 5 mole % Pd(O)dppe₂⁶ was unusually facile (<45 min, 25°C, THF). After semi-preparative HPLC, essentially a single regio- and stereoisomer was isolated in 96% yield.⁷ Structure $\text{8}$ was confirmed by extensive ¹H-NMR decoupling, as well as an off-resonance ¹³C-NMR experiment. In particular, H₁ (δ 4.53) was coupled vicinally to H₆ and H₆′ (5 Hz, 8 Hz) and H₂ (1.5 Hz), and allylically to H₃ (2 Hz). In contrast, H₄ (δ 2.78) was coupled to H₇ (10 Hz), H_5e and H_5a (1.8 Hz, 4 Hz), H₃ (5 Hz), and H₂ (<1 Hz). In addition, H₁ and H₄ exhibited a small long range coupling constant (J = <1 Hz). The coupling constants rule out

regioisomer $\text{9}$ and are fully consistent with the indicated conformation, which minimizes 1,3-diaxial-like interactions.Finally, catalytic osmylation of $\text{8}{}^8$ gave a single cis-diol $\text{10}$ in nearly quantitative yield. Appending of suitably functionalized side chains to provide an enantiocontrolled synthesis of pseudomonic acids A($\text{1a}$) and C($\text{2}$) is in progress.^9,10     

Regioselective synthesis of 4-alkylquinolines from quinoline via 1-ethoxycarbonyl-1, 2-dihydroquinoline-2-phosphonates

1-Ehtoxycarbonyl-1, 2-dihydroquinoline-2-phosphonates ($\text{3}$) were treated with n-butyllithium followed by alkyl halides to afford the corresponding 4-alkylated phosphonates ($\text{7}$) with complete regioselectivity in 67–97% yields. The phosphonates ($\text{7}$) were converted to 4-alkylquinolines ($\text{8}$) in ca. 50% yields by treatment with sodium iodide in HMPA or by alkaline hydrolysis in aqueous ethanol.     

Optical resolution of tricarbonyl(1-carboxycyclohexa-1,3-diene) iron and the absolute configuration of the products

Resolution of the acid ($\text{1}$) (shown as the (+)-isomer) into its optically pure (+) and (?) isomers and reduction of the CO₂H yields the 2-Me derivative ($\text{2}$) (shown as the (?)-isomer). The absolute configuration of ($\text{2}$) is defined by conversion of the salt ($\text{3}$) of known configuration into ($\text{2}$) and ($\text{4}$). This is the first resolution leading to preparation of pure complexes of known absolute configuration.     

Selective mixed coupling of carboxylic acids (I). - Electrolysis,thermolysis and photolysis of unsymmetrical diacyl peroxides with acyclic and cyclic alkyl groups

14 Unsymmetrical diacyl peroxides (R¹CO₂-O₂CR₂ with R¹: undecyl; R²: e.g. methyl, propyl, pentyl, nonyl, 2-methylpropyl, 2-propyl, 2-pentyl, cyclopropyl, cyclobutyl, cyclohexyl) are prepared in 85 to 92 % yield. Square pulse electrolysis of dodecanoyl octanoyl peroxide ($\text{li}$) affords the unsymmetrical coupling product octadecane($\text{4}$)ins poor yield and selectivity. Thermolysis or photolysis in solution produces preferentially $\text{4}$, but also considerable amounts of disproportionation products. At ?78°C the neat peroxides are photolysed selectively to the mixed dimers. With straight chain and β-branched alkyl groups high yields are obtained (63 – 76 %), with cycloalkyl groups medium yields (42 – 56 %), and with α-branched diacyl peroxides moderate yields (20 – 33 %). A comparison of the mixed Kolbe-electrolysis with the low temperature photolysis of the neat peroxide demonstrates the superiority of the latter method in small scale conversion with regard to yield and selectivity.     

The synthesis of a cationic ylide complex of platinum(II) by the reaction of tetrakis(triphenylphosphine)platinum(O) with choloroiodomethane.

The reaction of Pt(PPh₃)₄ with CH₂Cl1 in benzene yields the cationic ylide complex $\text{cis}$-[Pt(PPh₃)₂(CH₂PPh₃)Cl]I in high yield. This complex has been converted to $\text{cis}$-[(PPh₃)₂(CH₂PPh₃)X]X (X  Br or I) by reaction with LiBr or NaI. Reaction of $\text{cis}$-[Pt(PPH₃)I]I with iodine yields $\text{cis}$-[Pt(PPh₃)₂(CH₂PPh₃)I]I₃. Nmr data are given in support of the suggested structures.     

Electron-transfer photooxygenation of tetraphenylallene formation of 1,3-dihydroperoxy-1, 1,3,3-tetraphenyl-2-propanone and its decomposition under chemiluminescence

DCA-sensitized electron-transfer photooxygenation of tetraphenylallene ($\text{1}$) in acetonitrile yields benzophenone ($\text{3}$) and polymeric material. In acetone, the yield of $\text{3}$ is better than twice the amount obtained in acetonitrile and very little of polymeric material is observed. If the acetone solution is worked-up immediately after the oxygen consumption ceased, 1,3-dihydroperoxy-1,1,3,3-tetrapheny]-2-propanone ($\text{8}$) is isolated. Its formation is proposed to occur via the peroxyallyl zwitterion $\text{4}$ and the tetraphenylcyclopropanone ($\text{7}$) (Scheme 1). $\text{8}$ decomposes slowly into $\text{3}$, and CO + CO₂ (3:1) in neutral solution; in the presence of a base, decomposition is fast, resulting in the formation of two molecules of $\text{3}$, one molecule of water, and one molecule of CO₂ . Decomposition of $\text{8}$ in the presence of various fluorescers and a base yields a bright fluorescence of the additives.     

Core binding energies of the gaseous elements: the 3d levels of Te2 from X-ray photoelectron spectroscopy

The 3d levels of gaseous Te₂ have been studied by X-ray photoelectron spectroscopy. The binding energies are 580.14 ± 0.10 for the 3d_{$\text{5}\text{2}$} level and 590.45 ≈ 0.10 eV for 3d_{$\text{3}\text{2}$}. Comparison is made with the atomic binding energies of 581.33 (3d_{$\text{5}\text{2}$}) and 591.64 eV (3d_{$\text{3}\text{2}$}), computed using Desclaux's Dirac-Fock program, and with binding energies in ihe solid. The latter are ≈ 2.2 eV lower than those in Te₂.     

Rate constants for the reaction of the bromomethyne radical with alkynes

Absolute rate constants were measured for the gas phase reactions of the CBr($\text{～}\text{X}$²Π) radical produced in the flash photolysis of CHBr₃ with a series of alkynes. The rate of addition to the triple bond followed the trend established for addition to double bonds and a linear correlation between log k and ionization potentials reflects the electrophilic nature of the reaction. In comparison with published data on CCl, S(³P₂) the reactivity follows the trend CBr ≈ CCl ≈ S(³P₂) > O(³P₂).     

Synthesis of pyrethroids via epxoyamide cyclization

LDA-induced cyclization of $\text{4}$ yields $\text{5}$, the $\text{trans}$-isomer of which undergoes dehydration using Ph₂S[OC(CF₃)₂Ph]₂ to give the pyrethroid amide $\text{6}$.     

Studies on amino acids and peptides-III. 2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4-disulfide,LR, as a new racemization free coupling reagent in peptide synthesis

The easily accessible 2,4-bis (4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4-disulfide, $\text{LR}$, has been reacted with salts of N-protected amino acids $\text{1}$ (Z-Gly-OH, Boc-Gly-OH, Boc-S-Ser(Bzl)-OH, Boc-S-Tyr(Bzl)-OH, Z-S-Arg(Z₂)-OH, and Z-S-Pro-OH), at room temperature in CH₂Cl₂ to give the intermediates $\text{2}$, mixed anhydrides. When $\text{2}$ is treated with two moles of a base and one mole of the salt of an amino acid ester $\text{3}$ (TosOH·H-Gly-OBzl, HCl·H-Gly-OBzl, HCl·H-Gly-OEt, and HCl·H-S-Phe-OtBu) at 0°C, the expected peptide $\text{4}$ is isolated in high yields. LR is also found to be a useful reagent in a fragment coupling between Z-Gly-S-Ala-OH and TosOH·H-S-Leu-OBzl). This tripeptide was tested by means of HPLC (deprotection and amino acid analysis according to Izumiya was not necessary), and no epimerization (<0.7 %) was observed.     

A short and efficient synthesis of 4-hydroxy-5-(1-hydroxyalkyl)-γ-butyrolactones

The cycloaddition of α,β-epoxyaldehydes or ketones ($\text{2}$) with the ketene acetal MeHC=C(OMe)₂ ($\text{1}$) gives epoxyoxetanes ($\text{3}$) in high yields. Without isolation they can be transformed into 4-hydroxy-5-(1-hydroxyalkyl)-γ-butyrolactones ($\text{6}$) via the epoxy esters $\text{4}$ and trihydroxy esters ($\text{5}$). The lactones $\text{6}$ appear to be valuable precursors for the synthesis of 5-(1-hydroxyalkyl)-3-methyl-2-5H-furanones ($\text{7}$) and 3-methyl-5-ylidene-2-5H-furanones ($\text{8}$)     

Reductive coupling of α,β-enones I: Reduction of methyl-vinyl ketone and mesityl oxide.

Reductive coupling of methyl-vinyl ketone with TiCl₄-Mg gives pinacol $\text{1}$ (25%). According to the reducing agents, mesityl oxide yields 2,4,5,7-tetramethyl-octa-2,4,6-triene $\text{3}$ (with 4TiCl₃-LialH₄), triene $\text{3}$ or 2,4,5,7-tetramethyl-octa-2,6-dien-4,5-diol $\text{5}$ (with TiCl₄-Mg), pinacol $\text{5}$ (with VCl₃-Mg), and 2-acetyl-1,3,3,4,4-pentamethyl-cyclopentane $\text{7}$ (with CrCl₃-Mg or FeCl₃-Mg or ZrCl₄ or ZrCl₄-Mg) as major products.     

Acid-catalysed reactions of 3,5-dialkyl-spiro[2.5]Octa-2,5-dien-4-ones

Acid-catalysed ring opening of the spirodienones ($\text{2a}$) and ($\text{2b}$) using p-toluene-sulphonic acid affords the styrène derivatives ($\text{3a}$) and ($\text{3b}$), while treatment with acetic anhydride/H₂SO₄ affords the furan derivatives ($\text{4a}$) and ($\text{4b}$).     

Stereoselective total syntheses of (±)-sinularene and of (±)-5-epi-sinularene via intramolecular type-I-“magnesium-ene” reaction

(±)-Sinularene ($\text{1}$) as well as (±)-5-epi-sinularene ($\text{9}$) were synthesised in a stereocontrolled manner from the norbornene $\text{2}$ in overall yields of 4% and 8%, respectively. The key step $\text{5}$ → $\text{6}$ involves a regio- and stereoselective intramolecular “magnesium-ene” reaction.     

3-Bromo-2-(tert-butylsulfonyl)-1-propene. A multi-coupling reagent Part 1.

3-Bromo-2-(tert-butylsulfonyl)-1-propene $\text{4}$ is easily available in two steps from allyl-tert-butylthioether $\text{5}$ (70% overall yield). It reacts with a great variety of carbanions to give functionnalized α, β-unsaturated sulfones of type $\text{7}$ in high yields. A second nucleophile (lithium cuprates) can then be added to compounds $\text{7}$ to furnish functionnalized sulfones of type $\text{3}$ (Y=SO₂-tert-butyl).     

Trimethymetall-urotropinaddukte des aluminiums,galliums, indiums und thalliums

Reactions of urotropine (C₆H₁₂N₄) with trimethylmetal derivatives of Al, Ga, In und Tl in various ($\text{1}\text{1}$$\text{1}\text{4}$) molar ratios lead to stable and monomeric $\text{1}\text{1}$, $\text{1}\text{2}$ or $\text{1}\text{3}$ adducts in good yields, but no $\text{1}\text{4}$ addition product could be isolated. The vibrational spectra (IR and Raman) of all compounds are recorded and partly assigned. Some characteristic frequencies of the C₆N₄-skeletons clearly show the symmetry changes in the series of the $\text{1}\text{1}$ → $\text{1}\text{2}$ → $\text{1}\text{3}$ adducts (C_3ν → C_2ν → C_3ν). The X-ray structure determinations of C₆H₁₂N₄·.GaMe₃ (MeCH₃) and C₆H₁₂N₄·.2GaMe₃, are in good agreement with the vibrational spectra. Both compounds crystallize in monoclinic space groups (P2₁ and C2/c). The GaN distances are around 214 pm, and the values for the C₆N₄-skeletons are not significantly different from those for free urotropine.     

Einfache und stereoselektive synthese von α- und β-phenylglykosiden

Reaction of phenyl-trimethylsilylethers ($\text{3}$) with 1-O-trimethylsilyl-2,3,4,6-tetra-O-acetyl-D-glucoside ($\text{1}$) (anomeric mixture) yields almost exclusively the aryl-β-glucosides ($\text{4}$) in the presence of catalytic amounts of TMS-triflate at 20°C, whereas ($\text{3}$) and 1-O-trimethylsilyl-2,3,4,6-tetra-O-benzyl-D-glucoside ($\text{2}$) gives mainly the aryl-α-glucosides ($\text{8}$).     

The influence of the orientation of the NO molecule upon the chemiluminescent reaction NO+O3→NO2*+O2

A beam of state-selected NO molecules (J = Ω = $\text{3}\text{2}$) has been produced by an electrostatic hexapole and has been collided with O₃ molecules in a scattering chamber. The E-field dependence of the chemiluminescent cross section, σ_hr, has been investigated and resulted in the determination of the M-dependence of σ_hr: σ_hr (M)/σ₀ = 1.192±0.009, 0.0848±0.015, 1.177±0.015, 0.783±0.009 for M = $\text{3}\text{2}$, $\text{1}\text{2}$, $\text{?1}\text{2}$ and $\text{?3}\text{2}$, respectively. Application of the Legendre expansion technique and the density matrix formalism provided a deconvoluted σ_hr(γ), for a single angle of attack γ of the NO axis, expressed in simple model functions with adjustable parameters. From this analysis it is concluded that chemiluminescence only occurs when cos γ ≈ 1, the “end-on-head” orientation of NO yielding ≈ 30% of all collected light, and when cos γ ≈ ?0.275, the “broad-side-tail” orientation of NO yielding the remaining 70%. The steric factors belonging to these reactive orientations have been estimated and are S₁ = 0.25±0.07 and S₂ = 0.40±0.09, respectively. The observed dependence of σ_hr has been confronted with the rules of Woodward and Hoffman. Although there are indeed two symmetries (bpl and cpl) correlating the electron orbitals of the reactants and the products, these rules do not lead to an explanation of the steric effects of the NO+O₃ reaction.     

Adenosine cyclic 3′,5′-(RP)- and (SP)-phosphoramidates,the first representatives of nucleoside cyclic 3′,5′-phosphoramidates derived from ammonia

Adenosine cyclic 3′,5′-phosphoramidate $\text{2}$ was synthesized by reacting adenosine cyclic 3′,5′-phosphate $\text{1}$ with POCl₃, in trimethyl phosphate for 1 h at O°C, followed by in situ treatment of the reaction mixture with a suspension of (NH₄)₂CO₃ in anhydrous DMF or pyridine or DMF/pyridine mixture for 30 min at 25° C. Diastereoisomers ($\text{R}$_P)-$\text{2}$ and ($\text{S}$_P)-$\text{2}$ the relative quantities of which depended on the solvent of (NH₄)₂CO₃ treatment, were separated by reversed phase partition chromatography. Hydrolysis of (R_P)-$\text{2}$ and (S_P)-$\text{2}$ proceeded with predominant (90% in 0.1 N HCl, 100% in 0.1 N NaOH) -P-O-C bond breaking.     

Conformational analysis of trans-2,3-diaryloxy-1,4-dioxanes. A tool for discriminating between steric and electronic effects in the position of

The conformation of several $\text{trans}$-2,3-diaryloxy-1,4-dioxanes has been studied using ¹H NMR techniques. $\text{Trans}$-2,3-bis(4-nitrophenoxy)-1,4-dioxane and $\text{trans}$-2,3-bis(4-methoxyphenoxy)-1,4-dioxane have been found to be predominantly ( ≈98%) in diaxial conformation in CDCl₃). On the other hand, $\text{trans}$-2,3-bis(2,6-dimethylphenoxy)-1,4-dioxane exists in the same conditions as a 66:33 mixture of diaxial and diequatorial conformers. An explanation based on the fulfilment of the exo-anomeric effect is provided.