等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Acid-base Vapor Sensing Enabled by ESIPT-attributed Cd(II) Coordination Polymer with Switchable Luminescence

Fluorescence materials based on excited state intramolecular proton transfer(ESIPT) have attracted great attention due to the unique four-level energy states. Herein, we report the assembly of a Cd-L_F coordination polymer from purposely designed L_F(H₂hpi2cf) ligand, which can present switchable luminescence behavior by gain or loss protons originated in uncoordinated ESIPT sites and serve as acid-base vapor sensors. Fabricated into in-situ grown film or transparent ink by simple methods, Cd-L_F presents facile and portable amine sensor for food spoilage detection and fluorescent anti-counterfeiting ink applications.     

Double proton transfer and charge-transfer transitions in biological hydrogen-bonded systems guaninecytosine (GC) and GCMg2+ systems

Potential energy curves for intermolecular proton transfer have been calculated within a modified INDO scheme. Analysis of the nature of the excited states, with emphasis on charge-transfer transitions, has been performed. The proton-transfer probability was found to be markedly greater in some excited states than for the ground state. With the metal ions the double proton transfer should be most effective in charge-transfer states.     

Molecularly defined graphitic interface toward proton manipulation

Proton plays a critical role in electrochemical systems to control electrochemical reactivity or isotopic enrichment. Graphene is intensively investigated owing to its unique electronic structure and device fabrication. Through the structural tunability of graphitic materials by chemical or physical modification of the surface, graphene is revealed to be an ideal material for proton manipulation. Here, we review the use of graphene or graphitic materials toward the manipulation of proton with regard to the following three points. (1) Electronic properties of graphene: The electronic band structure of graphene can be modified by metal contacts owing to the interaction with a metal surface. (2) Molecular control of graphitic interface: The chemical structure of graphene can be modified, as is done in molecular chemistry, and can be used as a catalytic platform. (3) Proton conduction by graphene: Proton transport through a graphene layer occurs with a unique mechanism such as tunneling. We provide a perspective on the use of graphitic materials toward controlling the behavior of protons on the basis of the aforementioned points. From the above, graphene can be used as a platform for proton manipulation.     

”Our work showed how pretty damn good that material is“

Andre Geim and Konstantin Novoselov were awarded the Nobel Prize in physics ”for groundbreaking experiments regarding the two‐dimensional material graphene“. Nachrichten aus der Chemie asked Andre Geim what he likes most about graphene and if he, too, believes that this new form of carbon could be the silicon of the future.     

Study of degraded neutron spectra through metal matrix composites using CR-39 films

Considerable interest has grown in the last decade in the use of CR-39 films in routine neutron monitoring and dosimetry. In addition, work in neutron spectrometry has been undertaken by various workers (Decossas et al., 1984; Faermann et al., 1983; Fews et al., 1984; Turner et al., 1984). In the present study metal matrix composites (MMC) samples of Pb-Li, Pb-Cd, Al-Li and Al-B₄C were prepared by using powder metallurgy and alloying elements techniques. The density was obtained for these MMC samples in the range of 80-90% of the metal density. Degraded neutron spectra were obtained by exposing these samples to a ²⁵²Cf source housed in a camera and the detector used was CR-39 films covered with a 1 mm PE radiator. These spectra have also been validated through Monte Carlo Neutron and Photon Transport Code (1983).     

Inelastic collision processes of low-energy protons in liquid water

Production probabilities of ions and excited particle species along the proton beam track in liquid water are estimated around the Bragg peak region, taking into account charge-changing processes and energetic secondary electron (δ-ray) behavior. Ionization and excitation processes are divided into two categories in this study: primary processes associated with direct proton (or hydrogen) interaction and secondary processes arising from the electrons ejected by the primary process. We show that the number of events in the secondary processes producing ions and excited particles is larger than that of the primary processes around the Bragg peak while neutralized protons (i.e., hydrogen) with low energy have a large contribution to direct ionization. Effects of charge-changing processes on ionization and excitation are also discussed.     

Theoretical study of proton coupled electron transfer reaction in the light state of the AppA BLUF photoreceptor

The BLUF (blue light sensor using flavin adenine dinucleotide) domain is widely studied as a prototype for proton coupled electron transfer (PCET) reactions in biological systems. In this work, the photo-induced concerted PCET reaction from the light state of the AppA BLUF domain is investigated. To model the simultaneous transfer of two protons in the reaction, two-dimensional potential energy surfaces for the double proton transfer are first calculated for the locally excited and charge transfer states, which are then used to obtain the vibrational wave function overlaps and the vibrational energy levels. Contributions to the PCET rate constant from each pair of vibronic states are then analyzed using the theory based on the Fermi's golden rule. We show that, the recently proposed light state structure of the BLUF domain with a tautomerized Gln63 residue is consistent with the concerted transfer of one electron and two protons. It is also found that, thermal fluctuations of the protein structure, especially the proton donor-acceptor distances, play an important role in determining the PCET reaction rate. © 2018 Wiley Periodicals, Inc.     

A theoretical study of the ground and first excited singlet state proton transfer reaction in isolated 7-azaindole–water complexes

A systematic study of the proton transfer in the 7-azaindole–water clusters (7-AI(H₂O)_n; n=1–4) in both the ground and first excited singlet electronic states is undertaken. DFT(B3LYP) calculations for the ground electronic state shows that the more stable geometry of the initial normal tautomer presents a cyclic set of hydrogen bonds that links the two nitrogen atoms of the base across the waters. For the n=4 cluster the water molecules adopt a double ring structure so that two cycles of hydrogen bonds are found there. From this structure full tautomerization implies only one transition state so that a concerted but non-synchronous process is predicted by our theoretical calculations. This behavior is found both in the ground and the excited states where CIS geometry optimizations and TD(B3LYP) energy calculations are performed. The difference between both states is the height of the energy barrier that is much lower in the excited state. Another clear difference between both electronic states is that full tautomerization is an endergonic process in the ground state whereas it is clearly exergonic (then favorable) in the excited state. This is so because electronic excitation implies a charge transfer from the five-member cycle to the six-member one of 7-azaindole so that the proton transfer from the pyrrolic side to the pyridinic one is favored. These results clearly indicate that full tautomerization will not likely occur in the ground state but it will be quite easy (and fast) in the excited state. Reaction is already feasible in the S₁ 1:1 complex but it is faster in the 1:2 complex. However the reaction slows again for the 1:3 complex and, finally, reaches a new maximum for the largest cluster studied here, the n=4 case. These results, which are in agreement with experimental data, are explained in terms of the number of hydrogen bonds that are involved in the transfer. The proton transfer through a ring formed by the substrate and two water molecules is found to be the more efficient one, at least in this system.     

空间质子与电子综合辐照作用下甲基硅橡胶破坏模型

利用空间辐照环境模拟设备对甲基硅橡胶进行了质子、电子综合辐照试验.质子、电子的辐照能量均为150 keV,辐照剂量均为10¹⁶ cm^-2.质谱测试发现,综合辐照过程中有CH₃Si(O)CH₃气体生成.量子化学计算表明,H⁺直接进攻硅橡胶高分子链中的氧而导致高分子链断裂的过程要放热655.34 kJ/mol,是唯一的放热反应通道.这一过程不会形成稳定的过渡态和中间体,而是直接形成断键产物.计算分析结果与综合辐照形成的气体产物CH₃Si(O)CH₃相吻合.     

Copper Nanoparticles on Graphene Support: An Efficient Photocatalyst for Coupling of Nitroaromatics in Visible Light

Copper is a low‐cost plasmonic metal. Efficient photocatalysts of copper nanoparticles on graphene support are successfully developed for controllably catalyzing the coupling reactions of aromatic nitro compounds to the corresponding azoxy or azo compounds under visible‐light irradiation. The coupling of nitrobenzene produces azoxybenzene with a yield of 90 % at 60 °C, but azobenzene with a yield of 96 % at 90 °C. When irradiated with natural sunlight (mean light intensity of 0.044 W cm⁻²) at about 35 °C, 70 % of the nitrobenzene is converted and 57 % of the product is azobenzene. The electrons of the copper nanoparticles gain the energy of the incident light through a localized surface plasmon resonance effect and photoexcitation of the bound electrons. The excited energetic electrons at the surface of the copper nanoparticles facilitate the cleavage of the N O bonds in the aromatic nitro compounds. Hence, the catalyzed coupling reaction can proceed under light irradiation and moderate conditions. This study provides a green photocatalytic route for the production of azo compounds and highlights a potential application for graphene.