Composition of the black crusts from the Saint Denis Basilica, France, as revealed by gas chromatography-mass spectrometry

The organic fraction of black crusts from Saint Denis Basilica, France, is composed of a complex mixture of aliphatic and aromatic compounds. These compounds were studied by two different analytical approaches: tetramethyl ammonium hydroxide (TMAH) thermochemolysis in combination with gas chromatography-mass spectrometry (GC-MS), and solvent extraction, fractionation by silica column, and identification of the fraction components by GC-MS. The first approach, feasible at the microscale level, is able to supply fairly general information on a wide range of compounds. Using the second approach, we were able to separate the complex mixture of compounds into four fractions, enabling a better identification of the extractable compounds. These compounds belong to different classes: aliphatic hydrocarbons (nalkanes, n-alkenes), aliphatic and aromatic carboxylic acids (n-fatty acids, alpha,omega-dicarboxylic acids, and benzenecarboxylic acids), polycyclic aromatic hydrocarbons (PAH), and molecular biomarkers (isoprenoid hydrocarbons, diterpenoids, and triterpenoids). With each approach, similar classes of compounds were identified, although TMAH thermochemolysis failed to identify compounds present at low concentrations in black crusts. The two proposed methodological approaches are complementary, particularly in the study of polar fractions.     

Deoxygenative Deuteration of Carboxylic Acids with D2O

We report a general, practical, and scalable means of preparing deuterated aldehydes from aromatic and aliphatic carboxylic acids with D₂O as an inexpensive deuterium source. The use of Ph₃P as an O‐atom transfer reagent can facilitate the deoxygenation of aromatic acids, while Ph₂POEt is a better O‐atom transfer reagent for aliphatic acids. The highly precise deoxygenation of complex carboxylic acids makes this protocol promising for late‐stage deoxygenative deuteration of natural product derivatives and pharmaceutical compounds.     

Ceric Ammonium Nitrate Catalyzed Oxidation of Aldehydes and Alcohols

A variety of aromatic, aliphatic and conjugated aldehydes and alcohols were transformed to the corresponding carboxylic acids and ketones with a quantitative conversion in high yields with 70% t‐BuOOH solution in water in the presence of catalytic amounts of ceric ammonium nitrate [Ce(NH₄)₂(NO₃)₆] (CAN) under room temperature conditions. The scope of our catalytic system is applicable for a wide range of aromatic, conjugated and aliphatic substrates. These aldehydes were converted to the corresponding carboxylic acids in good isolated yields in reasonable times. This method possesses a wide range of capabilities since it can be used with other functional groups which may not tolerate oxidative conditions, involves fairly simple method for work‐up, exhibits chemoselectivity and proceeds under ambient conditions. The resulting products are obtained in good yields within reasonable time.     

Synthesis and Antibacterial Activity of s‐Triazoles,s‐Triazolo[3,4‐b]‐1,3,4‐thiadiazines and s‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles of 5‐Methylisoxazole

The condensation of 4‐amino‐5‐mercapto‐3‐(5‐methylisoxazol‐3‐yl)‐1,2,4‐triazole with substituted phenacyl bromide, aldehydes, p‐bromophenylisothiocyanate, aromatic carboxylic acids and oxalic acid, is described. The antibacterial activity of representative compounds was evaluated.     

Dimerization of aldehydes to carboxylic esters catalyzed by K2[Fe(CO)4]–crown ether system

K₂[Fe(CO)₄] (1) with a crown ether was found to be an efficient catalyst for the dimerization of aldehydes to carboxylic esters. Several aromatic aldehydes including furfural gave the corresponding esters in good yields. This reaction also proceeded intramolecularly to give phthalide from phthalaldehyde. However, aliphatic aldehydes gave aldol-condensation products instead of the corresponding esters. In the reactions of p-substituted benzaldehydes with 1, the reactivity decreased with increase of the electron-releasing ability of the substituents. On the basis of these results, the reaction mechanism including the nucleophilic attack of tetracarbonylferrate dianion to the carbonyl carbon is discussed.     

Cu(II) bromide catalyzed oxidation of aldehydes and alcohols

A variety of aromatic, aliphatic and conjugated aldehydes and alcohols were transformed to the corresponding carboxylic acids and ketones with a quantitative conversion in high yields with 70% t‐BuOOH solution in water in the presence of catalytic (5 mol%) amounts of CuBr₂ under room temperature conditions. The conversion of 4‐methoxybenzaldehyde to 4‐methoxybenzoic acid is extremely facile in MeCN at ambient temperature in the presence of 5 mol% CuBr₂ and 2 equiv. 70% t‐BuOOH (water) as the oxidant. Oxidation with t‐BuOOH (water) alone in MeCN was found to be negligible. The scope of our catalytic system is applicable for a wide range of aromatic, conjugated and aliphatic substrates. These aldehydes were converted to the corresponding carboxylic acids in good isolated yields in reasonable times. It is pertinent to mention here that mild halogenic oxidants like hypochlorites, chlorites and NBS are not suitable for substrates with electron‐rich aromatic rings, olefinic bonds and secondary hydroxyl groups. Substitutions at different positions on the phenyl ring do not hinder the reaction, although the reaction time is affected. Oxidation of α,β unsaturated derivatives resulted in the formation of the expected acid in good yield. In addition, the transformation of secondary alcohols to ketones is extremely facile. No recemization was observed for menthone. This method possesses a wide range of capabilities since it can be used with other functional groups which may not tolerate oxidative conditions, involves fairly simple method for work‐up, exhibits chemoselectivity and proceeds under ambient conditions. The resulting products are obtained in good yields within reasonable time. Copyright © 2011 John Wiley & Sons, Ltd.     

Poly(thioester)s

Syntheses and properties of aliphatic and aromatic polythioesters (PTEs) were reviewed including polythiocarbonates and polythiourethanes. The content is subdivided into the following sections: PTEs of aliphatic α‐mercapto carboxylic acid, PTEs of ω‐mercapto carboxylic acids, PTEs derived from α,ω‐dimercapto alkanes, aromatic poly(thioester)s, aliphatic poly(thiocarbonate)s, aliphatic poly(thiourethane)s and aromatic polythiocarbonates. The synthetic strategies reviewed in this article include anionic and cationic ring‐opening polymerizations, polycondensations in bulk, polycondensations in solutions, interfacial polycondensations and in vitro enzymatic polycondensations.     

Gas Chromatographic Separation of Carbonyl Compounds as Their 2,4-dinitrophenylhydrazones Using Glass Capillary Columns

The gas chromatographic separation of 22 carbonyl compounds as their 2,4-dinitrophenylhydrazones was investigated using glass capillary columns. Complete separation of the 2,4-dinitrophenylhydrazones of ten aliphatic aldehydes, eight aliphatic ketones and four aromatic aldehydes was obtained, except for the derivatives of n-valeraldehyde and isobutyl methyl ketone, whose peaks overlapped, and the o- and m-tolualdehyde derivatives, which were poorly separated. The optimum conditions were as follows: stationary phase, SF-96; column size, 20 m × 0.25 mm I.D. ; column temperature, 200-240°; injection and detector temperatures, 280-290°; carrier gas flow-rate, helium 1.0-1.2 ml/min or nitrogen 1.1-1.2 ml/min. The method was applied to the analysis of aliphatic carbonyl compounds in car exhaust fumes and cigarette smoke.     

Synthesis of some new benzimidazole-5(6)-carboxylic acids

The title compounds, 1,2-dialkyl-benzimidazole-5(6)-carboxylic acids 34–45 were prepared at four steps; 1) preparation of mono amide derivatives 1–11 by the reaction of methyl 3,4-diaminobenzoate and substituted phenyl or phenoxyacetic acid chlorides; 2) preparation of the methyl benzimidazolecarboxyl-ates 12–22 , with zinc chloride and dry hydrogen chloride gas; 3) alkaline hydrolysis of the esters 23–33 ; and 4) substitution of the imidazole ring with benzyl or p-fluorobenzyl bromide, in alkali medium. 2-Aryl-benzimidazole-5(6)-carboxylic acids 50–53 were prepared via the oxidative condensation of 3,4-diaminobenzoic acid and aromatic aldehydes with cupric ion.     

Insights into coal structure from degradation with ruthenium tetroxide and tandem mass spectrometry

The products of ruthenium tetroxid oxidation of coal (Illinois No. 2) at ambient temperature were examined by tandem mass spectrometry using positive and negative chemical ionization. The negative-ion mass spectrum of the coal sample displays seven homologous series of ions. Individual compounds were characterized by recording daughter spectra. In this way, the following types of compounds were identified: aliphatic dicarboxylic acids, aromatic dicarboxylic and tricarboxylic acids, anhydrides of the di- and tri-carboxylic acids, and dianhydrides corresponding to the tetracarboxylic aromatic acids. The positive-ion mass and daughter spectra provided additional confirmation. Two series of ions dominate the positive-ion mass spectrum, those from the aliphatic dicarboxylic acids, and the corresponding anhydrides. The fragmentation behavior of model compounds was examined to confirm these assignments. The carboxylic acids and anhydrides identified suggest the presence of particular structural features in the coal prior to oxidation. These include C₂–C₆ aliphatic bridges between aromatic units, fused ring aromatic structures, tetralin and indan structures.     

Characterization of fuel samples by on-line LC-GC with automatic group-type separation of hydrocarbons

Characterization of fuels by LC-GC is possible by use of automatic successive transfer (multiple transfer) of HPLC fractions to a GC via an on-column interface. This paper describes the instrumentation and the methodology for the HPLC separation of the hydrocarbons (aliphatic and aromatic) into separate groups and the on-line transfer of these groups to a capillary GC column. Two HPLC methods were used with the same valve configuration: single column (silica) with column back-flush to detector; and double column (silica and amino-bonded silica) with multiple fraction transfer and back-flush. The first method was used for the analysis of total saturated compounds and total aromatic compounds; the second was used for the separation of the one-, two-, three-, and four-ring aromatic compounds present in diesel fuels. Examples are shown of the characterization of diesel fuels, and the repeatability of the data.     

Enzymatic One-Step Reduction of Carboxylates to Aldehydes with Cell-Free Regeneration of ATP and NADPH

The direct generation of aldehydes from carboxylic acids is often a challenging synthetic task but undoubtedly attractive in view of abundant supply of such feedstocks from nature. Though long known, biocatalytic carboxylate reductions are at an early stage of development, presumably because of their co-factor requirement. To establish an alternative to whole-cell-based carboxylate reductions which are limited by side reactions, we developed an in vitro multi-enzyme system that allows for quantitative reductions of various carboxylic acids with full recycling of all cofactors and prevention of undesired over-reductions. Regeneration of adenosine 5′-triphosphate is achieved through the simultaneous action of polyphosphate kinases from Meiothermus ruber and Sinorhizobium meliloti and β-nicotinamide adenine dinucleotide 2′-phosphate is reduced by a glucose dehydrogenase. Under these conditions and in the presence of the carboxylate reductases from Neurospora crassa or Nocardia iowensis, various aromatic, heterocyclic and aliphatic carboxylic acids were quantitatively reduced to the respective aldehydes.     

1,3-Oxazolidin-4-ones. Synthesis and configuration of cis and trans isomers

Mixtures of cis and trans 1,3-oxazolidin-4-ones were obtained by cyclodehydration, in the presence of p-toluenesulfonic acid or boron trifluoride etherate, of lactamide and N-methyl-lactamide with aromatic and aliphatic aldehydes. The products were separated by column (silica) chromatography and their configurations were determined.     

Solvent‐Free Catalytic Friedel–Crafts Acylation of Aromatic Compounds with Carboxylic Acids by Using a Novel Heterogeneous Catalyst System: p‐Toluenesulfonic Acid/Graphite

TsOH/graphite was found to be an effective catalyst system for the Friedel–Crafts acylation of aromatic compounds with carboxylic acids. Both aliphatic and aromatic carboxylic acids reacted smoothly under TsOH/graphite catalysis to afford the corresponding aromatic ketones in high yields. The graphite was easily recovered by simple extraction and could be reused without decrease of activity in the presence of fresh TsOH.     

Characterization of military fog oil by comprehensive two-dimensional gas chromatography

The most commonly used military fog oil is characterized by comprehensive two-dimensional gas chromatography (GC×GC) coupled to either Flame Ionization Detection (FID) or Time-of-Flight Mass Spectrometric Detection (TOFMS) to advance the knowledge regarding the complete chemical makeup of this complex matrix. Two different GC×GC column sets were investigated, one employing a non-polar column combined with a shape selective column and the other an inverse column set (medium-polar/non-polar). The inverse set maximizes the use of the two-dimensional separation space and segregates aliphatic from aromatic fractions. The shape selective column best separates individual polycyclic aromatic hydrocarbons (PAHs) from the bulk oil. The results reveal that fog oil (FO) is composed mainly of aliphatic compounds ranging from C₁₀ to C₃₀, where naphthenes comprise the major fraction. Although many different species of aromatics are present, they constitute only a minor fraction in this oil, and no conjugated PAHs are found. The composition of chemically similar aliphatic constituents limits the analytical power of silica gel fractionation and GC–MS analysis to characterize FO. Among the aliphatic compounds identified are alkanes, cyclohexanes, hexahydroindanes, decalins, adamantanes, and bicyclohexane. The aromatic fraction is composed of alkylbenzene compounds, indanes, tetrahydronaphthalenes, partially hydrogenated PAHs, biphenyls, dibenzofurans and dibenzothiophenes. This work represents the best characterization of military fog oil to date. As the characterization process shows, information on such complex samples can only be parsed using a combination of sample preprocessing steps, multiple detection schemes, and an intelligent selection of column chemistries.     

Copper-catalyzed decarboxylative coupling reactions for the synthesis of propargyl amines

When aryl alkynyl carboxylic acids were allowed to react with amines and aldehydes in CH₃CN at 80 °C in the presence of 10 mol % CuI, the desired propargyl amines were formed in good yields. This coupling reaction demonstrated to work across a broad range of reagents including functionalized aryl alkynyl carboxylic acids, aliphatic and aromatic aldehydes, and cyclic and acyclic amines.     

微波促进下3-(2-苯并呋喃基)-4-氨基-5-巯基-1,2,4-三唑

微波辐射条件下, 首先由2-苯并呋喃甲酰肼依次与二硫化碳和水合肼反应合成3-(2-苯并呋喃基)-4-氨基-5-巯基- 1,2,4-三唑, 进一步在微波辐射条件下由4-氨基-5-巯基-1,2,4-三唑分别与芳甲酸/芳氧基乙酸、α-溴代苯乙酮及芳醛反应以较高产率制得了相应的1,2,4-三唑并[3,4-b]-1,3,4-噻二唑、1,2,4-三唑并[3,4-b]-1,3,4-噻二嗪及4-芳亚甲基亚胺基-5-巯基-1,2,4-三唑. 产物结构经IR, ¹H NMR, MS及元素分析进行了表征.     

Synthesis of carboxylic esters from aldehydes using metal carbonyl anions,part 2. Dimerization of aldehydes to carboxylic esters catalyzed by disodium pentacarbonylchromate,na2[cr(co)5]

Na₂[Cr(CO)₅] (1) was found to be an efficient catalyst for the dimerization of aldehydes to carboxylic esters. Several aromatic aldehydes including furfural gave the corresponding esters in good yields. This reaction also proceeded intramolecularly to give phthalide from phthalaldehyde. Compared with M₂[Fe(CO)₄] (M = Na, K), 1 was found to be a more efficient catalyst for this reaction. However, aliphatic aldehydes gave aldolcondensation products instead of the corresponding esters. In the reactions of p-substituted benzaldehydes with 1, the reactivity decreased with the increase of the electron-releasing ability of the substituents. However, even p-anisaldehyde, which hardly reacted with M₂[Fe(CO)₄], reacted with 1 to give the ester in moderate yield. The reaction mechanism, including the nucleophilic attack of the pentacarbonylchromate dianion on the carbonyl carbon, is discussed.     

A new synthesis of aldehydes from acids via reduction of N-acyl saccharins using sodium dihydro bis-(2-methoxy-ethoxy) aluminate

Synthesis of certain aldehydes from the carboxylic acids has been carried by reduction of the corresponding N-acyl saccharins using SDA. The N-acyl saccharins are easily prepared by reaction of an acid with γ-saccharin chloride, which can be used for the next step of reduction without isolation and purification. This provides a convenient and one step synthesis of aldehydes by combining the two reactions, viz., preparation of the N-acyl compound and its reduction. The method has been successfully applied for the reduction of aliphatic, alicyclic, aromatic, and a α,β-unsaturated acids to the corresponding aldehydes and the yields obtained are quite satisfactory.     

Selenium(IV) Oxide Catalyzed Oxidation of Aldehydes to Carboxylic Acids with Hydrogen Peroxide

A convenient method for oxidative transformation of aromatic, hetero-aromatic and aliphatic aldehydes into carboxylic acids is presented. It is based on the oxidation of aldehydes in THF using 30% hydrogen peroxide in the presence of 5 molar % of selenium(IV) oxide. The scope and limitation of the method are discussed.