二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Self-Assembling Drug Formulations with Tunable Permeability and Biodegradability

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.     

Pharmacological Extracts and Molecules from Virola Species: Traditional Uses,Phytochemistry, and Biological Activity

Virola is the largest genus of Myristicaceae in America, comprising about 60 species of medium-sized trees geographically spread from Mexico to southern Brazil. The plant species of this genus have been widely used in folk medicine for the treatment of several ailments, such as rheumatic pain, bronchial asthma, tumors in the joints, intestinal worms, halitosis, ulcers, and multiple infections, due to their pharmacological activity. This review presents an updated and comprehensive summary of Virola species, particularly their ethnomedicinal uses, phytochemistry, and biological activity, to support the safe medicinal use of plant extracts and provide guidance for future research. The Virola spp.’s ethnopharmacology, including in the treatment of stomach pain and gastric ulcers, as well as antimicrobial and tryponosomicidal activities, is attributable to the presence of a myriad of phytoconstituents, such as flavonoids, tannins, phenolic acids, lignans, arylalkanones, and sitosterol. Hence, such species yield potential leads or molecular scaffolds for the development of new pharmaceutical formulations, encouraging the elucidation of not-yet-understood action mechanisms and ascertaining their safety for humans.     

Diffusion of symmetrical and spherical solutes in protic,aprotic, and hydrocarbon solvents

The diffusion coefficients of a series of symmetrical tetraalkyltins (tetramethyltin, tetraethyltin, tetrapropyltin, tetrabutyltin, tetradodecyltin) of the gases argon, krypton, xenon, methane, and tetramethylmethane and of carbon tetrachloride and tetraethylmethane in hexane, decane, and tetradecane at 25°C have been determined using the Taylor dispersion technique. Diffusion coefficients for the gases in acetone, 2-propanol, 1-butanol, and 1-octanol were also determined. Deviations from the predictions of Stokes' law were found to be large, and the magnitude of the deviation can be directly related to solute size. The predictions of the Hubbard-Onsager equation were tested using the diffusion data.     

Unusual metals as electrode materials for electrochemical sensors

Although noble metals are still widely used in electroanalysis, a plethora of different nonconventional metals is now enriching the panorama of materials acting as the electrochemical transducer in sensing systems. In particular, Ti, Cu, Co, Fe, Mo, Ta, W, Rh, Bi, Sb, Te and Pb are discussed here in view of their peculiar physicochemical properties and of the interesting electrocatalytic activities ascribable to these elements and to the relevant metal oxide ultrathin films that spontaneously form at the electrode–solution interface. This behaviour, exploitable in electroanalysis for the detection of a number on analytes, is often accompanied by low price and high resistance to corrosion and to abrasion characterising these materials. These peculiarities encourage the possible use of the cited metals in a wide number of analytical frames, ranging from process control to bioimplantable sensing systems.     

High-throughput microwave-digestion procedures to monitor neurotoxic elements in body fluids by means of inductively coupled plasma mass spectrometry

Microwave (MW) digestion procedures with high sample throughput (simultaneous digestion of 36 or 80 samples) and procedural simplicity (disposable plastic tubes, or re-usable liners with screw-cap) were investigated for their efficiency in routine analyses of biological samples. Different digestion vessel materials were tested for metal leaching/adsorption and thermal resistance: quartz, glass, polyethylene (PE) and polystyrene (PS). For the instrumental quantification of Al, Bi, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sb, and Tl at ultra-trace levels in urine, serum, and whole blood, sector field inductively coupled plasma mass spectrometry (SF-ICP-MS) was used. The different pretreatment conditions and vessels were evaluated in terms of contamination risk, effective power of detection, accuracy, and precision. Results of analyses of serum, urine and whole blood certified reference materials (CRMs) were fully satisfactory for almost all the analytes. In the case of Hg, Mo, and Tl in serum digested in plastic containers the results were just below the lower limit of uncertainty of the certified range. On the basis of the present data the following MW procedures can be suggested: 1. for urine, digestion with nitric acid at atmospheric pressure in plastic vials; 2. for serum, digestion with nitric acid at atmospheric pressure in glass vessels; and 3. for whole blood, digestion under pressure in quartz tubes.Because of the levels of the procedural blanks, Bi was not measurable at the concentrations expected in human fluids, and Al was accurately detectable in whole blood only.     

酞菁染料的金属化和溴化与光物理影响的研究

以α位(2,4-二特戊基)苯氧基邻苯二腈作为环合前体,制备了多种金属酞菁,产物经元素分析、紫外、红外、核磁氢谱等分析手段进行表征.并选择了部分酞菁进行溴化,其中着重研究了不同中心金属以及溴化对染料Q带吸收的影响.结果表明,酞菁染料的金属化对于其Q带吸收影响很大,多数染料金属化后会出现蓝移,而选择合适的条件进行溴化,可以使得金属酞菁的Q带吸收出现一定程度的红移,其中部分溴化金属酞菁的吸收波长与光信息产业中使用的近红外激光器很接近,具有潜在的实用价值.     

Non-metathesis reactions of ruthenium carbene catalysts and their application to the synthesis of nitrogen-containing heterocycles

Non-metathesis reactions of ruthenium carbene catalysts, such as olefin isomerization, hydrogenation, radical reaction, activation of silane, cyclopropanation, epimerization cocyclopropane, [3 + 2] cycloaddition, and cycloisomerization, are summarized. The utility of these reactions was demonstrated by the synthesis of indole using olefin isomerization and subsequent ring-closing metathesis, the synthesis of indoline using cycloisomerization, and the synthesis of the putative structure of fistulosin using cycloisomerization as a key step.     

Cucurbiturils–a New Family of Host Molecules

The supramolecular chemistry of cucurbituril, a synthetic receptor, is fascinating because of the remarkable guest binding behavior of the host. Although cucurbituril is potentially as useful as crown ethers, cyclodextrins, and calixarenes in many applications, its chemistry has not been developed much until recently because of several shortcomings. Recently we synthesized cucurbituril homologues and derivatives. These new members of the cucurbituril family have expanded the scope further, and interest in them has grown enormously. The diversity in guest binding behavior has led to many interesting studies such as redox control of guest binding, stabilization of charge-transfer complexes inside the host cavity, encapsulation of drug molecules, formation of redox-controllable vesicles, and so on. The cucurbituril homologues and derivatives thus provide new opportunities in many areas of supramolecular chemistry including recognition, catalysis, separation, transport, and many others.     

Synthesis and characterization of new aromatic polyamides bearing crown ethers and acyclic ethylene oxide units in the pendant structure. III. Benzo‐18‐crown‐6 systems and their open‐chain counterparts

We report the synthesis and characterization of 10 novel polyamides containing the benzo‐18‐crown‐6 subunit and its dipodal counterpart, along with their properties, and a comparison with homologous polyamides bearing benzo‐12‐crown‐4, benzo‐15‐crown‐5, and the corresponding dipodal systems. The anomalous polymerization of some of the diacid monomers, that leads to insoluble gels under standard Yamazaki polymerization conditions, is described. The gel formation has been attributed to the threading of cyclic oligoamides with a growing polyamide chain to yield rotaxanes, polyrotaxanes, catenanes, or polycatenanes. Polyamide macrocycles have been characterized with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. A route to avoid gel formation, consisting of a lower initial monomer concentration, is also described, along with the polymer properties of the polyamides obtained, including the chemical characterization, mechanical behavior, water sorption, morphology, diffusion data, and permeability of membranes prepared with these polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6252–6269, 2006     

化学平衡有向图

根据化学平衡原理和图论中的基本概念，提出了一种适用于化学平衡计算的赋权有向图。这种有向图具有三个重要性质：其一，边的方向改变则该边的权随着取逆(取原权的倒数或负值)；其二，顺乘逆除(或顺加逆减)一条路上的各权得到自起点至终点的累积权；其三，回路的权等于1(或零)。本文主要叙述这种图的提出及其在化学平衡中的初步应用。     

Ion chromatographic analysis of amines, alkanolamines, and associated anions in concrete

In order to assess the effectiveness of applying penetrating corrosion inhibitors to the surface of reinforced concrete, it is necessary to devise accurate methods for their detection and quantification. In this paper, methods for ion chromatographic analysis of a variety of amines, alkanolamines, and associated anions, which may be used as corrosion inhibitors for steel reinforcement in concrete, are described. By careful adjustment of the conditions for analysis, these inhibitors were readily identified and quantified in concrete/cement pore solutions or digests. Characterisation of the cationic inhibitors, ethanolamine, quaternary methylammonium, dimethylethanolamine, cyclohexylamine, guanidine, and arginine, and the anionic inhibitors, nitrite, molybdate, acetate, benzoate, and azelate, was carried out conductimetrically. To enhance the sensitivity of detection, amperometry was used for the analysis of triethanolamine and low concentrations of ethanolamine. Ion chromatography was also used as a means of obtaining a distribution profile of the concentrations of inhibitor ions present throughout a concrete structure.     

MISCIBILITY AND MORPHOLOGY OF THIN FILMS OF BLENDS OF POLYSTYRENE WITH BROMINATED POLYSTYRENES： EFFECTS OF VARYING THE MOLECULAR WEIGHT, BROMINATION DEGREE AND ANNEALING

Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poIy(styrene-co-p-bromo-styrene), i.e., PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised, in this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Aw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.     

天然化合物芦丁的治疗潜力

芦丁属于类黄酮化合物,广泛存在于人们日常食用的各种蔬菜、水果和中草药中。 芦丁是天然的抗氧化剂,有清除自由基的特性,可调节众多疾病有关的细胞内和细胞外信号通路,影响细胞的生长,分化及其功能,对人们的健康,防病治病起着重要作用。芦丁具有广泛的药理活性,抗氧化、抗炎、抗病毒、抗癌、预防和治疗心脑血管疾病。以芦丁为原料的药品有多种,使用芦丁毒副作用小,安全,成本低。由于芦丁的生物利用度低,在临床上应用受到一定的限制。克服芦丁溶解性差的问题已经有各种方法,例如使用环糊精的络合,磷脂等,改善水溶性,从而增加生物利用度。本文综述了芦丁的多种潜在用途和治疗作用的信息,与药物输送相关的问题,以及改善药物生物利用度的可能方法。重点介绍了芦丁的抗炎、抗癌、降糖、对心血管的保护作用,为天然化合物的开发和利用奠定基础。     

Adhesion of a pair of polyethylene moldings by polyethylene gels

It was found that polyethylene gels in solvents such as benzene, toluene, xylene, decalin, tetralin, tetrachloroethylene, 1,1,2,2-tetrachloroethane, and chlorobenzene are effective for adhesion of a pair of polyethylene plates. In particular, the adhesion strength of polyethylene gels in decalin, tetralin and tetrachloroethylene was strong enough for practical use.Adhesive effect appears due to local dissolution of the surface of polyethylene plate in contact with the gel with increasing temperature, and subsequent recrystallization.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

Physico-chemical properties of Chitosan films

Chitosan films obtained by dry phase inversion were prepared from an aqueous solution of chitosan in acetic acid. The films, of thickness less than 20 μm, were transparent, very flexible and had smooth surfaces. Increasing the film thickness induced an increase of the internal tensions and the consequent formation of a rough surface. Structural investigations by X-ray diffraction and Fourier transform IR analysis, showed that the chitosan films, as prepared, are amorphous. Further annealing to evaporate acetic acid and water traces, changed the amorphous phase into a more ordered phase, characterized by diffraction peaks at 2θ values of 9, 17, 20 and 23 degrees. Thermal investigations by TG, DTG, and DTA revealed that the decomposition of the chitosan films as prepared proceeds in two stages, starting from 180°C and 540°C.     

多极性基有机添加物对非离子表面活性剂溶液雾点的影响

测定了甲酸、乙酸、草酸、甲醇、乙醇、丙醇、乙二醇、丙三醇和葡萄糖对非离子表面活性剂Triton X-100和Triton X-114水溶液雾点的影响。低级脂肪酸和醇能使雾点升高, 升高的程度随酸或醇的碳氢链的增长而增加。但若在增加分子碳氢链长或碳氢部分的同时引入更多的羧基或羟基, 则雾点升高的效应将受到抑制。当极性基数目较多时, 可导致雾点显著下降。     

Dry reforming of methane for syngas production: A review and assessment of catalyst development and efficacy

Dry reforming of methane (DRM) involves catalytic reaction of CO₂ and CH₄ to produce syngas. Although the process is environmentally beneficial, it has not been implemented on industrial level due to multiple challenges, particularly with regard to catalyst deactivation because of use of very high temperature. A majority of research has been carried out with catalysts based on nickel. However, recently many new varieties catalysts using noble metals, structured silica-foams, zeolites, etc. have been investigated for DRM. The present review paper deals with understanding the process of DRM, importance of catalysts, supports and promoters, various methods of synthesis of catalysts, design of catalyst, catalytic performance and ways to enhance it, constraining elements like poisoning of the catalyst, in addition to physicochemical properties of catalysts. Various properties of supports and promoters like reduction/oxidation potential, acidity/basicity, reducibility, oxygen storage capacity, etc. are responsible for catalyst activity and stability. It identifies critical gaps and provides future directions.     

光催化CO2还原的超薄层状催化剂

The acceleration of industrialization and the continuous upgradation of consumption structure has increased the atmospheric content of CO₂ far beyond the past levels, leading to a serious global environmental problem. Photocatalytic reduction of CO₂ is one of the most promising methods to solve the problem of rising atmospheric CO₂ content. The core of this technology is to develop efficient, environment-friendly, and affordable photocatalysts. A photocatalyst is a semiconductor that can absorb photons from sunlight and produce electron-hole pairs to initiate a redox reaction. Owing to their low specific surface areas, significant electron-hole recombination, and less surface-active sites, bulk photocatalysts are not satisfactory. Ultrathin layered materials have shown great potential for photocatalytic CO₂ reduction owing to their characteristics of large specific surface area, a large number of low-coordination surface atoms, short transfer distance from the inside to the catalyst surface, along with other advantages. Photoexcited electrons only need to cover a short distance to transfer to the nanowafer surface, and the speed of migrating electrons on the nanowafer surface is much higher than that in the layers or in the bulk catalyst. The ultrathin structure leads to significant coordinative unsaturation and even vacancy defects in the lattice structure of the atoms; while the former can be used as active sites for CO₂ adsorption and reaction, the latter can improve the separation of the electron-hole pair. This review summarizes the latest developments in ultrathin layered photocatalysts for CO₂ reduction. First, the photocatalytic reduction mechanism of CO₂ is introduced briefly, and the factors governing product selectivity are explained. Second, the existing catalysts, such as g-C₃N₄, black phosphorus (BP), graphene oxide (GO), metal oxide, transition metal dichalcogenides (TMDCs), perovskite, BiOX (X = Cl, Br, I), layered double hydroxide (LDH), 2D-MOF, MXene, and two-dimensional honeycomb-like Ge―Si alloy compounds (gersiloxenes), are classified. In addition, the prevalent preparation methods are summarized, including mechanical stripping, gas stripping, liquid stripping, chemical etching, chemical vapor deposition (CVD), template method, self-assembly of surfactant, and the intermediate precursor method of lamellar Bi-oleate complex. Finally, we introduced the strategy of improving photocatalyst performance on the premise of maintaining its layered structure, including the factors of thickness adjustment, doping, structural defects, composite, etc. The future opportunities and challenges of ultrathin layered photocatalysts for the reduction of carbon dioxide have also been proposed.