An ESIPT-Dependent AIE Fluorophore Based on HBT Derivative: Substituent Positional Impact on Aggregated Luminescence and its Application for Hydrogen Peroxide Detection

Aiming to develop the facile organic fluorophore possessing excited state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE), we designed and synthesized two isomers with different linkage site between hydroxyl of 2-(2-hydroxyphenyl) benzothiazole (HBT) and a benzothiazole substituent (para position refers to p-BHBT and ortho position refers to o-BHBT). Fluorescence emission properties of p-BHBT and o-BHBT in THF/water mixtures with different water volume fractions indicated an opposite luminescence in aggregates, in which p-BHBT showed an ESIPT-dependent AIE properties while o-BHBT displayed ESIPT effect and aggregation-caused quenching (ACQ) qualities. A possible mechanism for molecular actions to illustrate the aggregating luminescence alteration of these two isomers had been proposed and verified by theoretical and experimental studies. More importantly, Probe-1, generated from dual ESIPT-AIE fluorophore p-BHBT, was successfully used as a ratiometric fluorescent chemosensor for highly selective (above 15-fold over other ROS) and sensitive (69-fold fluorescence enhancement with 0.22 μM of detection limit) detection of hydrogen peroxide in aqueous solution and living cells, respectively.     

Strategic emission color tuning of highly fluorescent imidazole-based excited-state intramolecular proton transfer molecules

Highly fluorescent molecules harnessing the excited state intramolecular proton transfer (ESIPT) process are promising for a new generation of displays and light sources because they can offer very unique and novel optoelectronic properties which are different from those of conventional fluorescent dyes. To realize innovative ESIPT devices comprising full emission colors over the whole visible region, a molecular design strategy for predictable emission color tuning should be established. Here, we have developed a general strategy for a wide-range spectral tuning of imidazole-based ESIPT materials based on three different strategies--introduction of a nodal plane model, extension of effective conjugation length, and modification of heterocyclic rings. A series of nine ESIPT molecules were designed, synthesized and comprehensively investigated for their characteristic emission properties. All these molecules commonly showed no clear and transparent visible range absorption with no absorption color, but showed different colors of intense photoluminescence over broad visible regions from 450 nm (HPI) to 630 nm (HPNO) depending on their molecular structure. With the aid of density functional theory and time-dependent DFT calculations using M06, wB97XD, and B3LYP parameters with the 6-31G(d,p) basis set, these tuned emission bands of nine emitters were assigned from the stabilized excited state conformations that were derived from modified molecular structures.     

Modulation of excited-state intramolecular proton transfer by viscosity in protic media

3-Hydroxyquinolones undergo excited-state intramolecular proton transfer (ESIPT), resulting in a dual emission highly sensitive to H-bonding perturbations. Here, we report on the strong effect of viscosity on the dual emission of 2-(2-thienyl)-3-hydroxyquinolone in protic solvents. An increase in viscosity significantly decreases the formation of the ESIPT product, thus changing dramatically the ratio of the two emission bands. Time-resolved studies suggest the presence of solvated species characterized by decay times close to the solvent relaxation times in viscous media. The intramolecular H bond in this species is probably disrupted by the solvent, and therefore, its ESIPT requires a reorganization of the solvation shell for restoring this intramolecular H bond. Thus, the ESIPT reaction of this dye and its dual emission depend on solvent relaxation rates and, therefore, on viscosity. The present results suggest a new physical principle for the fluorescence ratiometric measurement of local viscosity.     

Strong solvatochromic fluorescence from the intramolecular charge-transfer state created by excited-state intramolecular proton transfer

In this work, we report a peculiar positive solvatochromism in the keto emission of the acceptor-substituted 2-(2'-hydroxyphenyl)benzoxazoles (HBO), which originates from the excited-state intramolecular proton transfer (ESIPT) followed by the intramolecular charge transfer (ICT) and subsequent solvent relaxation. This transient evolution of enhanced ICT characteristic triggered by ESIPT, which is first observed in this work, is responsible for the novel concept of a fast hyperpolarizability modulator as well as the unique solvatochromic behavior.     

激发态分子内质子转移(ESIPT)发色团修饰的树枝形聚合物合成及光物理研究

设计合成了0～4代外围修饰激发态分子内质子转移(ESIPT)发色团的聚酰胺-胺树枝形聚合物G0～G4,化合物结构经过IR,1H NMR,13C NMR和MS表征.稳态光谱研究表明,树枝形聚合物在四氢呋喃溶液中形成了聚集体,发色团酮式发光随着化合物代数增大呈先增加后减小的变化.质子化树枝形聚合物G1-H～G4-H能溶于水,并在水中形成20 nm左右的聚集体,发色团在聚集体疏水区中构象受限,仅发射酮式发光,并且发光强度受树枝形聚合物分子大小的影响.     

Accessing the long-lived triplet excited states in bodipy-conjugated 2-(2-hydroxyphenyl) benzothiazole/benzoxazoles and applications as organic triplet photosensitizers for photooxidations

Bodipy derivatives containing excited state intramolecular proton transfer (ESIPT) chromophores 2-(2-hydroxyphenyl) benzothiazole and benzoxazole (HBT and HBO) subunits were prepared (7-10). The compounds show red-shifted UV-vis absorption (530-580 nm; ε up to 50000 M(-1) cm(-1)) and emission compared to both HBT/HBO and Bodipy. The new chromophores show small Stokes shift (45 nm) and high fluorescence quantum yields (Φ(F) up to 36%), which are in stark contrast to HBT and HBO (Stokes shift up to 180 nm and Φ(F) as low as 0.6%). On the basis of steady state and time-resolved absorption spectroscopy, as well as DFT/TDDFT calculations, we propose that 7-9 do not undergo ESIPT upon photoexcitation. Interestingly, nanosecond time-resolved transient absorption spectroscopy demonstrated that Bodipy-localized triplet excited states were populated for 7-10 upon photoexcitation; the lifetimes of the triplet excited states (τ(T)) are up to 195 μs. DFT calculations confirm the transient absorptions are due to the triplet state. Different from the previous report, we demonstrated that population of the triplet excited states is not the result of ESIPT. The compounds were used as organic triplet photosensitizers for photooxidation of 1,5-dihydroxylnaphthalene. One of the compounds is more efficient than the conventional [Ir(ppy)(2)(phen)][PF(6)] triplet photosensitizer. Our result will be useful for design of new Bodipy derivatives, ESIPT compounds, and organic triplet photosensitizers, as well as for applications of these compounds in photovoltaics, photocatalysis and luminescent materials, etc.     

Excited-state intramolecular proton transfer in 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives: the effect of donor and acceptor substituents

A series of water-soluble 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives containing electron-donating and accepting groups attached to various positions of the fluorophore pi-system has been synthesized and characterized in aqueous solution at 0.1 M ionic strength. The measured pK(a)'s for deprotonation of the sulfonamide group of monosubstituted derivatives range between 6.75 and 9.33 and follow closely Hammett's free energy relationship. In neutral aqueous buffer, all compounds undergo efficient excited-state intramolecular proton transfer (ESIPT) to yield a strongly Stokes-shifted fluorescence emission from the phototautomer. Upon deprotonation of the sulfonamide nitrogen at high pH, ESIPT is interrupted to yield a new, blue-shifted emission band. The peak absorption and emission energies were strongly influenced by the nature of the substituents and their attachment positions on the fluorophore pi-system. The fluorescence quantum yield of the ESIPT tautomers revealed a significant correlation with the observed Stokes shifts. The study provides valuable information regarding substituent effects on the photophysical properties of this class of ESIPT fluorophores in an aqueous environment and may offer guidelines for designing emission ratiometric pH or metal-cation sensors for biological applications.     

Acid‐Induced Shift of Intramolecular Hydrogen Bonding Responsible for Excited‐State Intramolecular Proton Transfer

The significant progress recently achieved in designing smart acid‐responsive materials based on intramolecular charge transfer inspired us to utilize excited‐state intramolecular proton transfer (ESIPT) for developing a turn‐on acid‐responsive fluorescent system with an exceedingly large Stokes shift. Two ESIPT‐active fluorophores, 2‐(2‐hydroxyphenyl)pyridine (HPP) and 2‐(2‐hydroxyphenyl)benzothiazole (HBT), were fused into a novel dye (HBT‐HPP) fluorescent only in the protonated state. Moreover, we also synthesized three structurally relevant control compounds to compare their steady‐state fluorescence spectra and optimized geometric structures in neutral and acidic media. The results suggest that the fluorescence turn‐on was caused by the acid‐induced shift of the ESIPT‐responsible intramolecular hydrogen bond from the HPP to HBT moiety. This work presents a systematic comparison of the emission efficiencies and basicity of HBT and HPP for the first time, thereby utilizing their differences to construct an acid‐responsive smart organic fluorescent material. As a practical application, red fluorescent letters can be written using the acid as an ink on polymer film.     

Understanding the aggregation induced emission enhancement for a compound with excited state intramolecular proton transfer character

A few of excited state intramolecular proton transfer (ESIPT) compounds have been discovered for their aggregation induced emission enhancement (AIEE). To understand the AIEE mechanism, an ESIPT compound BTHPB (N-(4-(benzo[d]thiazol-2-yl)-3-hydroxyphenyl)benzamide) with simple structure was designed and synthesized. BTHPB showed apparent AIEE property and the emission efficiency was observed as high as 0.27 in the aggregates. On the basis of viscochromism experiments and calculations employing the linear coupling model, the restriction of the rotation between the two subunits taken place in ESIPT was considered as the main factor for the AIEE. The micro- and femtosecond transient absorption experiments offered evidence for the considerations. Additionally, we also observed a negative effect of aggregation on the fluorescence emission in the system. So the AIEE of ESIPT compound BTHPB originated from the combination effects of positive and negative factors induced by the aggregation.     

Designing of naphthalene based acylhydrazone derivative as a selective fluorogenic sensor for strong volatile acids based on aggregation-induced emission

In the present study, a cognitive self-assembled fluorescent chemosensor, (2-hydroxy-naphthalene-1-ylmethylene)-hydrazide (NIZ) was presented which disclosed sensitive and selective trace quantity detection of strong volatile acids both in binary solvent mixture [2:8 (v/v) THF/water] and solid state (thin film) based on aggregation-induced emission (AIE) characteristics. In molecularly dissolved state, NIZ participated in the excited-state intramolecular proton transfer (ESIPT), where the dynamic flexibility during a fast photoinduced process debilitated the consumed excited energy nonradiatively and enabled NIZ to be completely nonluminescent in THF (φ_f = 0.39%). However, vigorous rigidification of molecular framework upon exercising different noncovalent forces obstructed all possible intramolecular motions via restricted intramolecular rotation (RIR), where delimited ESIPT upon prompting the molecules into self-assembly resulted dramatically augmented emission intensity (φ_f = 29.8%) impregnated with AIE behavior in THF/water. Subsequently, spontaneously evolved green emissive fluorescent nanoaggregates were primarily employed as a fluorescent chemosensor for aqueous phase recognition of strong acids where protonation-induced destruction of aggregated morphology due to reasonable interaction between NIZ and analytes led to a selective fluorescence quenching towards trifluoroacetic acid [(HTFA); detection limit (DL) = 41.74 nM], hydrochloric acid [(HCl); DL = 47.47 nM] and nitric acid [(HNO₃); DL = 50.17 nM). Importantly, the ready-made cost-effective test kits of NIZ exhibited a selective fluorogenic response towards vapors from HNO₃, HTFA and HCl in the rapid fashion where DLs were as low as 0.88, 1.39 and 4.57 ppm respectively to demonstrate the “in-the field” monitoring of air quality. Finally, the reversible “ON-OFF” fluorogenic response from NIZ inspired us to device a “use” and “throw” security marker upon alternative presence of HTFA and triethylamine (TEA) to augment the day-to-day practical applications.     

The effects of thermal quenching on the excited-state intramolecular proton transfer reaction in 3-hydroxyflavones

The 3-hydroxyflavone (3HF) and its derivatives are the classical objects in the studies of the mechanisms of excited-state intramolecular proton transfer (ESIPT) reaction due to very frequent observation of two separate bands in fluorescence emission belonging to reactant and reaction product. Those of them possessing electron-donor groups in 4' position find many applications as fluorescence sensors and probes because of their much higher sensitivity of their two-band ratiometric response to interactions with the environment. We report on the strong differences between 3HF and such derivatives in the behavior of their fluorescence spectra as a function of temperature. The thermal quenching changes the intensity ratio of two bands strongly for 3HF but does not change it for its studied derivatives. These results are interpreted in terms of different kinetic mechanisms of ESIPT reaction. In 3HF the equilibrium between the two excited-state species is not established prior to emission, so that the ESIPT reaction is under kinetic control, but in these derivatives the equilibrium is established faster than the emission and the reaction is under thermodynamic control. We suggest that the thermal perturbation of fluorescence spectra can be an extremely simple and convenient alternative to time-resolved spectroscopy for determining if slow irreversible or fast reversible ESIPT reaction gives rise to two bands of fluorescence spectra of similar magnitude. This is essential for the development of new wavelength-ratiometric fluorescence sensors and probes.     

Excited State Intramolecular Proton Transfer in Methyl and Methoxy Substituted Salicylic Acid

The excited state intramolecular proton transfer (ESIPT) processes in 3‐methylsalicyclic acid (3‐MeSA) and 3‐methoxysalicyclic acid (3‐MeOSA) have been investigated in cyclohexane medium by emission spectroscopic techniques. The ESIPT process was characterized in 3‐MeSA from the large Stokes fluorescent band (455 nm), but it was suppressed by 3‐MeOSA in cyclohexane. The ESIPT process was found to be accelerated both in 3‐MeSA and 3‐MeOSA in the presence of a hydrogen bond accepting agent, triethylamine (TEA). Further, theoretical calculations were carried out at the ground and excited states to complement the experimental evidences.     

Comprehensive studies on an overall proton transfer cycle of the ortho-green fluorescent protein chromophore

Initiated by excited-state intramolecular proton transfer (ESIPT) reaction, an overall reaction cycle of 4-(2-hydroxybenzylidene)-1,2-dimethyl-1H-imidazol-5(4H)-one (o-HBDI), an analogue of the core chromophore of the green fluorescent protein (GFP), has been investigated. In contrast to the native GFP core, 4-(4-hydroxybenzylidene)-1,2-dimethyl-1H-imidazol-5(4H)-one (p-HBDI), which requires hydrogen-bonding relay to accomplish proton transfer in vivo, o-HBDI possesses a seven-membered-ring intramolecular hydrogen bond and thus provides an ideal system for mimicking an intrinsic proton-transfer reaction. Upon excitation, ESIPT takes place in o-HBDI, resulting in a ～600 nm proton-transfer tautomer emission. The o-HBDI tautomer emission, resolved by fluorescence upconversion, is comprised of an instantaneous rise to a few hundred femtosecond oscillation in the early relaxation stage. Frequency analysis derived from ultrashort pulse gives two low-frequency vibrations at 115 and 236 cm(-1), corresponding to skeletal deformation motions associated with the hydrogen bond. The results further conclude that ESIPT in o-HBDI is essentially triggered by low-frequency motions and may be barrierless along the reaction coordinate. Femtosecond UV/vis transient absorption spectra also provide supplementary evidence for the structural evolution during the reaction. In CH(3)CN, an instant rise of a 530 nm transient is resolved, which then undergoes 7.8 ps decay, accompanied by the growth of a rather long-lived 580 nm transient species. It is thus concluded that following ESIPT the cis-proton transfer isomer undergoes cis-trans-isomerization. The results of viscosity-dependent dynamics are in favor of the one-bond-flip mechanism, which is in contrast to the volume-conserving isomerization behavior for cis-stilbene and p-HBDI. Further confirmation is given by the picosecond-femtosecond transient IR absorption spectra, where several new and long-lived IR bands in the range of 1400-1500 cm(-1) are assigned to the phenyl in-plane breathing motions of the trans-proton transfer tautomer. Monitored by the nanosecond transient absorption, the 580 nm transient undergoes a ～7.7 μs decay constant, accompanied by the growth of a new ～500 nm band. The latter is assigned to a deprotonated tautomer species, which then undergoes the ground-state reverse proton recombination to the original o-HBDI in ～50 μs, achieving an overall, reversible proton transfer cycle. This assignment is unambiguously supported by pump-probe laser induced fluorescence studies. On these standpoints, a comparison of photophysical properties among o-HBDI, p-HBDI, and wild-type GFP is discussed in detail.     

Amphiphilic ESIPT benzoxazole derivatives as prospective fluorescent membrane probes

Fluorescent amphiphilic benzoxazole derivatives were synthesized and used to produce photoactive phosphatidylcholine (PC) liposomes by reserve-phase evaporation. The dyes absorbed in the UV region and were fluorescent in the blue-green region (determined by solvent polarity). The alkyl chain length seemed to play a fundamental role in the photophysics of the benzoxazole fluorophore in reverse liposomes, and despite the same ESIPT core and phospholipid building block, each amphiphilic dye had a particular emission profile related to the dye location in the liposome. The fluorescence emission spectra from dye 5 showed that its fluorophore experienced a polar environment, due to the single normal emission, while dyes 6–7 had (in part) a normal emission, and the main fluorescent band ascribed to the ESIPT emission indicated a more hydrophobic environment. Despite the complex fluorescent profiles, the benzoxazole derivatives could be successfully introduced into the reverse liposome structure due to the interaction between the alkyl chain and PC bilayer.     

Rotational energy barrier of 2-(2',6'-dihydroxyphenyl)benzoxazole: a case study by NMR

2-(2'-Hydroxyphenyl)benzoxazole (HBO) derivatives represent an important class of luminescent materials, as they can undergo excited state intramolecular proton transfer (ESIPT). The material's ESIPT properties are dependent on the ratio of two different rotamers, whose interconversion is poorly understood. By using HBO derivative 4, the rotational energy barrier of 2- (2',6'-hydroxyphenyl)benzoxazole is determined to be 10.5 kcal/mol by variable-temperature NMR. Although a HBO derivative typically exhibits two rotamers with O···H-O (e.g., 1a) and N···H-O bonding (e.g., 1b), correlation of NMR with fluorescence data reveals that the rotamer with N···H-O bonding is predominant in the solution.     

ESIPT-regulated Mechanoresponsive Luminescence Process byIntroducing Intramolecular Hydrogen Bond in NaphthalimideDerivatives#br#

Herein, two compounds, 4-2′-hydroxybenzylidenehydrazinyl-N-butyl-1,8-naphthalimide(BN-1) and 4-benzylidenehydra-zinyl-N-butyl-1,8-naphthalimide(BN-2), were synthesized to explore the hydrogen bonding effect on mechanoresponsive luminescent(MRL). The results showed that compound BN-1 exhibited strong emission in solution and solid-state compared with compound BN-2. After grinding, the emission intensity of compound BN-1 sharply decreased by as much as 15 times with an obvious red-shift from 552 nm to 577 nm. The control compound BN-2, by contrast, did not change so much before and after grinding. Single crystal analysis suggests that BN-1 molecule formed strong intramolecular interaction via ―N=N···H―O hydrogen bond with a distance of 0.2632 nm. An excited-state intramolecular proton transfer(ESIPT) based fluorophore featured this intramolecular hydrogen bond. The intramolecular hydrogen bond as well as other intermolecular interactions can rigidify the molecular conformation of compound BN-1 in solid-state, and thus suppress the nonradiative pathways, resulting in strong emission. These intra- and intermolecular interactions were destroyed by mechanical stimuli, accompanied by molecular conformation change that decreases the luminescence and blocks the ESIPT process. The MRL process was also demonstrated by scanning electron microscopy and powder X-ray diffraction. The molecular stacking mode changed from crystalline to a disordered amorphous state after grinding.     

Femtosecond dynamics on excited-state proton/charge-transfer reaction in 4'-N,N-diethylamino-3-hydroxyflavone. The role of dipolar vectors in constructing a rational mechanism

The excitation behaviors for 4'-N,N-diethylamino-3-hydroxyflavone (Ia) have been investigated via femtosecond fluorescence upconversion approaches to gain detailed insights into the mechanism of the proton/charge-transfer coupling reaction. In polar solvents such as CH2Cl2 and CH3CN, in addition to a slow, solvent-polarity-dependent rate (a few tens of picoseconds(-1)) of excited-state intramolecular proton transfer (ESIPT) reported previously, early femtosecond relaxation dynamics clearly reveal that the proton-transfer tautomer emission consists of a rise component of a few hundred femtoseconds. The temporal spectral evolution at the time domain of zero to a few hundred femtoseconds further resolves two distinct emission bands consisting of a proton-transfer tautomer emission and a time-dependent Stokes shifted emission. The results, in combination with ab initio calculations on the dipolar vectors for normal and tautomer species, lead us to unveil the importance of the relationship of the dipolar vectors among various states, and hence the corresponding solvation energetics in the overall ESIPT reaction. We conclude a similar dipolar character between ground-state normal (N) and excited proton-transfer tautomer (T*) species, whereas due to the excited-state intramolecular charge transfer (ESICT), the normal excited state (N*) possesses a large dipolar change with respect to N and T*. ESIPT is thus energetically favorable at the Franck-Condon excited N*, and its rate is competitive with respect to the solvation relaxation process. After reaching the solvent equilibration, there exists an equilibrium between N* and T* states in, for example, CH3CN. Due to the greatly different equilibrium polarization between N* and T*, both forward and reversed ESIPT dynamics are associated with a solvent-induced barrier. The latter viewpoint of the equilibrium type of ESIPT in Ia is in agreement with the previous reports based on steady-state, picosecond, and femtosecond dynamic approaches.     

Ionic liquid-induced unprecedented size enhancement of aggregates within aqueous sodium dodecylbenzene sulfonate

Physicochemical properties of aqueous micellar solutions may change in the presence of ionic liquids (ILs). Micelles help to increase the aqueous solubility of ILs. The average size of the micellar aggregates within aqueous sodium dodecylbenzene sulfonate (SDBS) is observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM) to increase in a sudden and drastic fashion as the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) is added. Similar addition of [bmim][PF(6)] to aqueous sodium dodecyl sulfate (SDS) results in only a slow gradual increase in average aggregate size. While addition of the IL [bmim][BF(4)] also gives rise to sudden aggregate size enhancement within aqueous SDBS, the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]), and inorganic salts NaPF(6) and NaBF(4), only gradually increase the assembly size upon their addition. Bulk dynamic viscosity, microviscosity, dipolarity (indicated by the fluorescent reporter pyrene), zeta potential, and electrical conductance measurements were taken to gain insight into this unusual size enhancement. It is proposed that bmim(+) cations of the IL undergo Coulombic attractive interactions with anionic headgroups at the micellar surface at all [bmim][PF(6)] concentrations in aqueous SDS; in aqueous SDBS, beyond a critical IL concentration, bmim(+) becomes involved in cation-π interaction with the phenyl moiety of SDBS within micellar aggregates with the butyl group aligned along the alkyl chain of the surfactant. This relocation of bmim(+) results in an unprecedented size increase in micellar aggregates. Aromaticity of the IL cation alongside the presence of sufficiently aliphatic (butyl or longer) alkyl chains on the IL appear to be essential for this dramatic critical expansion in self-assembly dimensions within aqueous SDBS.     

Supramolecular formation of triblock copolymers in polar/nonpolar solvents

Triblock copolymers could form supramolecules in either polar or nonpolar solvents at appropriate concentration and temperature ranges or in the presence of additives. The association properties and the structure of supramolecules of PEO-PPO-PEO and PPO-PEO-PPO (PEO and PPO refer to poly(oxyethylene) and poly(oxypropylene), respectively) triblock copolymers in xylene and/or water were investigated by using light scattering, small-angle neutron scattering, and small-angle X-ray scattering. The association process of aqueous solution or water-rich ternary systems was entropy driven and temperature played an important role. The additive, e.g., water in the oil-rich ternary system, played a very important role on the micellization of PEO-PPO-PEO, e.g., Pluronic L64, in xylene. The micelles had a core-shell structure and the micellar shell was rather heavily solvated. At high copolymer concentrations, large aggregates with a lamellar structure was formed and the amount of large aggregates increased with increasing copolymer concentration before gel formation.