A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

Tridentate lysine-based fluorescent sensor for Hg(II) in aqueous solution

A novel homoplastic podand fluorescent sensor based on flexible hydrophilic lysine was prepared. Lysine with two dansyl groups-appended at both ends supplied a possibility for a tridentate binding toward Hg(II) and finally resulted in a unique selectivity to Hg(II) over other transition-metal ions with a hypersensitivity (detection limit 2.0 nM) in neutral buffered aqueous solutions. Notably, the coordination of chloride ion to the complex of sensor-Hg(II) brought forth that the trend in the NMR chemical shift for hydrogen and carbon atoms of the sensor was contrary to the findings in the former reports, which shows upfield shifts for the hydrogens and the alkane carbons but downfield shifts for the dansyl carbons, respectively.     

A highly selective and sensitive fluorescent chemosensor for Hg2+ in neutral buffer aqueous solution

A selective and sensitive fluorescent chemosensor for Hg2+, which was composed of two aminonaphthalimide fluorophores and a receptor of 2,6-bis(aminomethyl)pyridine, was synthesized through the reaction of 2,6-bis(chloromethyl)pyridine and N-[2-(2-hydroxyethoxy)ethyl]-4-piperazino-1,8-naphthalimide. The chemosensor showed an about 17-fold increase in fluorescence quantum yield upon addition of 1 equiv of Hg2+ in neutral buffer aqueous solution, and the other common metal ions did not notably disturb the detection of Hg2+.     

Selective Hg(II) detection in aqueous solution with thiol derivatized fluoresceins

The syntheses and photophysical properties of mercury sensors 2 and 3 (MS2 and MS3), two asymmetrically derivatized fluorescein-based dyes designed for Hg(II) detection, are described. These sensors each contain a single pyridyl-amine-thiol metal-binding moiety, form 1:1 complexes with Hg(II), and exhibit selectivity for Hg(II) over other Group 12 metals, alkali and alkaline earth metals, and most divalent first-row transition metals. Both dyes display superior brightness (Phi x epsilon) and fluorescence enhancement following Hg(II) coordination in aqueous solution. At neutral pH, the fluorescence turn-on derives from greater brightness due to increased molar absorptivity. At higher pH, photoinduced electron transfer quenching of the free dye is enhanced, and the Hg(II)-induced turn-on also benefits from alleviation of this pathway. MS2 can detect ppb levels of Hg(II) in aqueous solution, demonstrating its ability to identify environmentally relevant concentrations of Hg(II).     

A rhodamine-based Hg2+-selective fluorescent probe in aqueous solution

A new rhodamine-based Hg²⁺-selective fluorescent probe (I) was designed and synthesized. Compound I displays excellent selective and sensitive response to Hg²⁺ over other transition metal ions in neutral aqueous solutions. I itself is a colorless, nonfluorescent compound. Upon addition of Hg²⁺ to its solution, the thiosemicarbazide moiety of I undergoes an irreversible desulfurization reaction to form the corresponding 1,3,4-oxadiazole (II), a colorful and fluorescent product, causing instantaneous development of visible color and strong fluorescence emission. Based on this mechanism, a fluorogenic probe for Hg²⁺ was developed. The fluorescence increases linearly with the Hg²⁺ concentration up to 0.8 μmol L⁻¹ with the detection limit of 9.4 nmol L⁻ (3σ).     

Potentiometric and spectroscopic study of copper(II) complexes with glycyl-glycyl-l-histidyl-l-alanine in aqueous solution

The complex formation between copper(II) and the tetrapeptide glycyl-glycyl-l-histidyl-l-alanine ([H₃L]²⁺) has been studied in aqueous solution at t = 25°C and I = 0.1 mol dm⁻³ by potentiometric, visible spectrophotometric and circular dichroism measurements. All the experimental techniques show that the complex [CuLH₋₂]⁻ is predominant over a wide pH range, while the monodentate [CuLH]²⁺ is formed in the acidic region and a further deprotonated [CuLH₋₃]²⁻ species exists at pH higher than 10. The formation constants of the three above complexes are reported and a structure is proposed on the basis of spectroscopic results. The structure of [CuLH₋₂]⁻ species very probably involves four nitrogen donors in the plane, excluding coordination by the l-alanine residue, while it seems likely that [CuLH₋₃]²⁻ is formed by simple dissociation of the N-1 pyrrole hydrogen.     

Anilinepropylsilica xerogel used as a selective Cu (II) adsorbent in aqueous solution

The metal ion adsorption properties of the microporous hybrid anilinepropylsilica xerogel were studied using divalent copper, zinc, and cadmium ions in aqueous solutions in concentrations ranging from 10(-4) up to 5x10(-3) moll(-1). At low concentrations the surface of the solid phase presents selectivity for Cu (II), even in competitive conditions. This preferential sorption ability for copper in relation to zinc and cadmium ions was interpreted by considering the xerogel morphology.     

On Mn(Hg)/Mn(II) equilibria and reactions in aqueous solution

The title subject has been studied through galvanostatic single-pulse and chronopotentiometric measurements on the Mn(Hg)/Mn(II) electrode and equilibrium measurements on the same and the Ag/AgCl electrode, all in x MMnCl₂+(0.5?x)M MgCl₂ solutions of pH 4.3–4.9 at 25°C. The Mn(Hg)/Mn(II) reactions are found to occur in two consecutive steps, an unsymmetric (α_c near 0.8) ion-transfer step Mn(Hg)/Mn(I) and an essentially symmetric (α_c near 0.5) electron-transfer step Mn(I)/Mn(II). Besides charge transfer, no sluggishness other than diffusion is observed, but the dispersed precipitate Mn₂Hg₅ of saturated amalgam serves as an ageing-dependent source of anodic reactant Mn(Hg). Quantitative kinetic and thermodynamic data are presented and discussed. Comparisons are made to corresponding reactions for the succeeding elements iron, cobalt, nickel, copper, and zinc.     

Hydrothermal single-crystal growth in the systems Ag/Hg/X/O (X = VV, AsV): crystal structures of (Ag3Hg)VO4, (Ag2Hg2)3(VO4)4, and (Ag2Hg2)2(HgO2)(AsO4)2 with the unusual tetrahedral cluster cations (Ag3Hg)3+ and (Ag2Hg2)4+ and crystal structure of AgHgVO4

Single crystals of (Ag3Hg)VO4 (I), (Ag2Hg2)3(VO4)4 (II), AgHgVO4 (III), and (Ag2Hg2)2(HgO2)(AsO4)2 (IV) were grown under hydrothermal conditions (250 degrees C, 5 d) from starting mixtures of elementary mercury, silver nitrate, ammonium vanadate, and disodium hydrogenarsenate, respectively. All crystal structures were determined from X-ray diffraction data, and their chemical compositions were confirmed by electron microprobe analysis. I crystallizes in the tillmannsite structure, whereas II-IV adopt new structure types: (I) I4, Z = 2, a = 7.7095(2) A, c = 4.6714(2) A, 730 structure factors, 24 parameters, R[F2 > 2sigma(F2)] = 0.0365; (II) I42d, Z = 4, a = 12.6295(13) A, c = 12.566(3) A, 1524 structure factors, 55 parameters, R[F2 > 2sigma(F2)] = 0.0508; (III) C2, Z = 4, a = 9.9407(18) A, b = 5.5730(8) A, c = 7.1210(19) A, beta = 94.561(10) degrees , 1129 structure factors, 48 parameters, R[F2 > 2sigma(F2)] = 0.0358; (IV) P31c, Z = 2, a = 6.0261(9) A, c = 21.577(4) A, 1362 structure factors, 52 parameters, R[F2 > 2sigma(F2)] = 0.0477. The most striking structural features of I, II, and IV are the formation of tetrahedral cluster cations (Ag3Hg)3+ and (Ag2Hg2)4+, respectively, built of statistically distributed Ag and Hg atoms with a metal-metal distance of about 2.72 A. The electronic structure of these clusters can formally be considered as two-electron-four-center bonding. The crystal structure of III differs from the protrusive structure types insofar as silver and mercury are located on distinct crystallographic sites without a notable metal-metal interaction >3.55 A. All crystal structures are completed by tetrahedral oxo anions XO4(3-) (X = VV, AsV) and for IV additionally by a mercurate group, HgO2(2-).     

A novel highly selective fluorescent chemosensor for Hg（Ⅱ） in fully aqueous media

A novel fluorescent Hg~(2 ) chemosensor based on dithia-dioxa-monoaza crown ether was synthesized in four steps from inexpensive starting materials.This new sensor exhibited very strong fluorescence response to Hg~(2 ) (F_(Hg~(2 ))/F_(free)>130) and it was highly selective to Hg~(2 ) over the other metal ions by more than 45-fold.     

Rhodamine-based Hg2+-selective chemodosimeter in aqueous solution: fluorescent OFF-ON

[reaction: see text] N-(Rhodamine-6G)lactam-N'-phenylthiourea-ethylenediamine (1) was developed as a fluorescent and colorimetric chemodosimeter in aqueous solution with a broad pH span (5 approximately 10) and high selectivity toward Hg2+ but no significant response toward other competitive cations, such as Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Pb2+, Cd2+, Ca2+, Mg2+, K+, Na+, etc. The Hg2+-promoted ring opening of spirolactam of the rhodamine moiety induced cyclic guanylation of the thiourea moiety, which resulted in the dual chromo- and fluorogenic observation (OFF-ON).     

Potentiometric behaviour of the copper electrode in aqueous copper(II) perchlorate solutions containing sodium chloride

It is demonstrated that the copper metal electrode corrodes in the presence of copper(II) ions in solution. A model based on mass balance can properly describe the experimental results. In the presence of copper(II) ions the copper electrode responds to copper(I), indicating that the electrode potential corresponds to a mixed potential.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Fluorescent coumarinyldithiane as a selective chemodosimeter for mercury(II) ion in aqueous solution

A coumarin-based dithiane (1) was synthesized for the selective detection of Hg²⁺ with respect to dual chromo- and fluorogenic changing events in an aqueous solution by the mercury-promoted transformation of a dithiane group into an aldehyde functional unit. The Hg²⁺-selective response of the chemodosimeter was clearly observed in aqueous buffer as well as in human blood plasma medium.     

On Cu(Hg)/Cu(II) equilibria and reactions in aqueous sulphate solution

Combined thermodynamic and kinetic studies have revealed amalgam properties, solution activities, and diffusion data besides charge-transfer parameters and exchange rates for either step of the Cu(Hg)/Cu(II) electrode in aqueous solutions of xM CuSO₄+(0.5?x) M MgSO₄+H₂SO₄ (to pH about 2.5) at 25°C. The studies allow separation of mean ionic activities into convenient single-ion ones. The kinetic results demonstrate the consecutive two-step mechanism involved. Comparison is made to the solid Cu/Cu(II) electrode, and double-layer effects are discussed.     

Potentiometric investigation mixed ligand complexes of Ni(II) with DL-methionine and Dl-ethionine in aqueous solution

The formation of mixed ligand complexes of Ni(II) with DL-methionine in aqueous solution was investigated. The composition and stability constants of the complexes were determined by the potentiometric method.     

Characterization of ceramic ion-selective membrane-electrodes-I The Ag(2)S electrode

The behaviour of a new type of electrode, made from ceramic Ag(2)S, has been investigated. The electrode response is Nernstian for Ag(+) over the range 10(-6)-2M and for Hg(2+) in the concentration range 10(-6)-10(-2)M, both at constant ionic strength (0.1M). The electrode is Ag(+)-selective, with maximum interference from Hg(2+). It can be used for acid-base potentiometric titration and for potentiometric Ag(+) and Hg(2+) precipitation titrations.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.