Dramatic solvent effect on the volume of the Diels-Alder reaction between tetracyanoethylene and cyclopentadiene

The partial molar volumes (V) and the enthalpies of dissolution (Δ_dis H) for tetracyanoethylene, cyclopentadiene, and their Diels—Alder adduct were determined at 25°C. Eleven solvents of the π- and n-donor type were used. The use of alkylbenzenes as solvents for tetracyanoethylene induces pronounced changes in the enthalpy of dissolution (up to 26 kJ mol⁻¹) and in the partial molar volume (up to 11 cm³ mol⁻¹), whereas these parameters for the adduct change slightly. TheV and Δ_dis H values for cyclopentadiene virtually do not depend on the nature of the solvent. In the case of tetracyanoethylene and the adduct in n-donor solvents, considerable variations of theV and Δ_dis H values are observed; they are not linear functions of the change in the partial molar volume of the adduct. Therefore, the reaction volumes in acetonitrile (−40.69) and ethyl acetate (−45.56) differ sharply from those ino-xylene (−24.28) and mesitylene (−21.76 cm³ mol⁻¹). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1046–1050, June, 2000.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Kinetics and mechanism of thermal polymerization of hexafluoropropylene under high pressures

The basic kinetic parameters of thermal polymerization of hexafluoropropylene, namely, general rate constants, degree of polymerization, and their temperature and pressure dependences in the range of 230–290 °C and 2–12 kbar (200–1200 MPa) were determined. The activation energy (E _act = 132±4 kJ mol⁻¹) and activation volume (ΔV ₀ ^≠ = −27±1 cm³ mol⁻¹) were calculated. The activation energy of thermal initiation of polymerization was estimated. The reaction scheme based on the assumption about a biradical mechanism of polymerization initiation was proposed.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butylpyridinium tetrafluoroborate (BPBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _p,m [J K⁻¹ mol⁻¹]=181.43+51.297X −4.7816X ²−1.9734X ³+8.1048X ⁴+11.108X ⁵ [X=(T−135)/55] for the solid phase (80–190 K), C _p,m [J K⁻¹ mol⁻¹]= 349.96+25.106X+9.1320X ²+19.368X ³+2.23X ⁴−8.8201X ⁵ [X=(T−225)/27] for the glass state (198–252 K), and C _p,m[J K⁻¹ mol⁻¹]= 402.40+21.982X−3.0304X ²+3.6514X ³+3.4585X ⁴ [X=(T−338)/52] for the liquid phase (286–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BPBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BPBF₄ was observed at 194.09 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g=2.157 kJ mol⁻¹ and ΔS _g=11.12 J K⁻¹ mol⁻¹, respectively. The result showed that the melting point of the BPBF₄ is 279.79 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 8.453 kJ mol⁻¹ and ΔS _m=30.21 J K⁻¹ mol⁻¹. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BPBF₄ was determined to be Δ_c H _m⁰ = −5451±3 kJ mol⁻¹. The standard molar enthalpy of formation of BPBF₄ was evaluated to be Δ_f H _m⁰ = −1356.3±0.8 kJ mol⁻¹ at T=298.150±0.001 K.     

Influence of pressure in the 0.1–100 MPa interval on the first dissociation constant of arsenous acid in water solutions at 298.15 K

The influence of pressure on the dissociation of arsenous acid H₃AsO₃ was studied at 298.15 K by the potentiometric method. In the pressure interval from 0.1 to 100 MPa the values of logK ₁^o = −9.32 + 0.00246P. The change in the molar volume of the reaction of the dissociation of H₃AsO₃ from the first step (ΔV ₁^o = −15.4 ± 1 cm³/mol) and the partial molar volume of its dissociation product, H₂AsO₃⁻ (V ^o = 32.1 ± 1 cm³/mol) were determined.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Thermochemical studies on the thioproline

The combustion energy of thioproline was determined by the precision rotating-bomb calorimeter at 298.15 K to be Δ_c U= –2469.30±1.44 kJ mol^–1. From the results and other auxiliary quantities, the standard molar enthalpy of combustion and the standard molar enthalpy of formation of thioproline were calculated to be Δ_c H _m ^θC₄H₇NO₂S, (s), 298.15 K= –2469.92±1.44 kJ mol^–1 and Δ_f H _m ^θC₄H₇NO₂S, (s), 298.15K= –401.33±1.54 kJ mol^–1.     

Effects of fused benzene rings on tautomerizations and inversions of benzo, azabenzo, and oxabenzocycloheptatrienes at theoretical levels

Biologically important bicyclic species, including 6H-, 6H-6-aza-, and 6-oxabenzocycloheptatrienes (in which the benzene moiety is fused meta with respect to the tetrahedral constituents: –CH₂–, –NH–, and –O–, respectively), show strong shifts of tautomerizations in favor of the corresponding tricyclic benzonorcaradienes (with ΔH values of −11.49, −14.55, and −19.20 kcal mol⁻¹, respectively), at B3LYP/6-311++G**//B3LYP/6-31G*, and MP2/6-311++G**//MP2/6-31G* levels, and at 298 K. In contrast, such shifts are strongly disfavored by the isomeric bicyclic species in which the benzene moieties are fused ortho or para with respect to –CH₂–, –NH–, and –O–, respectively. Hence for species with ortho benzene rings including 5H-, 5H-5-aza- and 5-oxabenzocycloheptatrienes, tautomerization ΔH values are 30.76, 31.89, and 25.27 kcal mol⁻¹, respectively, while for species with para fused benzene moieties including 7H-, 7H-7-aza-, and 7-oxabenzocycloheptatrienes, tautomerization ΔH values are 24.12, 26.00, and 19.55 kcal mol⁻¹, respectively. NICS calculations are successfully used to rationalize these results. The calculated energy barriers for inversion of the seven-membered rings of bicyclic species predict a dynamic nature for all the structures except for the virtually planar 6H-6-aza- and 6-oxabenzocycloheptatrienes. Finally, our theoretical data are compared to the experimental results where available. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Thermophysical Investigations of the Polymorphous Phases of Calcium Carbonate

1. Results of thermodynamic and kinetic investigations for the different crystalline calcium carbonate phases and their phase transition data are reported and summarized (vaterite: V; aragonite: A; calcite: C). A→C: T _tr=455±10°C, Δ_tr H=403±8 J mol^–1 at T _tr, V→C: T _tr=320–460°C, depending on the way of preparation,Δ_tr H=–3.2±0.1 kJ mol^–1 at T _tr,Δ_tr H=–3.4±0.9 kJ mol^–1 at 40°C, S _V ^Θ= 93.6±0.5 J (K mol)^–1, A→C: E _A=370±10 kJ mol^–1; XRD only, V→C: E _A=250±10 kJ mol^–1; thermally activated, iso- and non-isothermal, XRD 2. Preliminary results on the preparation and investigation of inhibitor-free non-crystalline calcium carbonate (NCC) are presented. NCC→C: T _tr=276±10°C,Δ_tr H=–15.0±3 kJ mol^–1 at T _tr, T _tr – transition temperature, Δ_tr H – transition enthalpy, S ^Θ – standard entropy, E _A – activation energy. 3. Biologically formed internal shell of Sepia officinalis seems to be composed of ca 96% aragonite and 4% non-crystalline calcium carbonate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Standard molar enthalpies of formation and sublimation of <Emphasis Type="Italic">N</Emphasis>-phenylphthalimide

The standard (p ⁰=0.1 MPa) molar enthalpy of formation, Δ_f H ⁰ _m, for crystalline N-phenylphthalimide was derived from its standard molar enthalpy of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as –206.0±3.4 kJ mol^–1. The standard molar enthalpy of sublimation, Δ^g _cr H ⁰ _m , at T=298.15 K, was derived, from high temperature Calvet microcalorimetry, as 121.3±1.0 kJ mol^–1. The derived standard molar enthalpy of formation, in the gaseous state, is analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluoroborate (BMIPF₆) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature (X) by polynomial equations, C _P,m (J K⁻¹ mol⁻¹) = 204.75 + 81.421X − 23.828 X ² + 12.044X ³ + 2.5442X ⁴ [X = (T − 132.5)/52.5] for the solid phase (80–185 K), C _P,m (J K⁻¹ mol⁻¹) = 368.99 + 2.4199X + 1.0027X ² + 0.43395X ³ [X = (T − 230)/35] for the glass state (195 − 265 K), and C _P,m (J K⁻¹ mol⁻¹) = 415.01 + 21.992X − 0.24656X ² + 0.57770X ³ [X = (T − 337.5)/52.5] for the liquid phase (285–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BMIPF₆ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BMIPF₆ was measured to be 190.41 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g = 2.853 kJ mol⁻¹ and ΔS _g = 14.98 J K⁻¹ mol⁻¹, respectively. The results showed that the milting point of the BMIPF₆ is 281.83 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 20.67 kJ mol⁻¹ and ΔS _m = 73.34 J K⁻¹ mol⁻¹.     

Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K

The temperature dependence of the molar heat capacity (C⁰ _p) of hydrofullerene C₆₀H₃₆ between 5 and 340 K was determined by adiabatic vacuum calorimetry with an error of about 0.2%. The experimental data were used for the calculation of the thermodynamic functions of the compound in the range 0 to340 K. It was found that at T=298.15 K and p=101.325 kPa C⁰ _p (298.15)=690.0 J K⁻¹ mol⁻¹,H^o(298.15)−H^o(0)= 84.94 kJ mol⁻¹,S^o(298.15)=506.8 J K⁻¹ mol⁻¹, G^o(298.15)−H^o(0)= −66.17 kJ mol⁻¹. The standard entropy of formation of hydrofullerene C₆₀H₃₆ and the entropy of reaction of its formation by hydrogenation of fullerene C₆₀ with hydrogen were estimated and at T=298.15 K they were Δ_fS^o= −2188.4 J K⁻¹ mol⁻¹ and Δ_rS^o= −2270.5 J K⁻¹mol⁻¹, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymorphism of paracetamol

The thermodynamic relationship between crystal modifications of paracetamol was studied by alternative methods. Temperature dependence of saturated vapor pressure for polymorphic modifications of the drug paracetamol (acetaminophen) was mea sured and thermodynamic functions of the sublimation process calculated. Solution calorimetry was carried out for the two modifications in the same solvent. Thermodynamic parameters for sublimation for form I (monoclinic) were found: ΔG _sub²⁹⁸=60.0 kJ mol⁻¹; ΔH _sub²⁹⁸=117.9±0.7 kJ mol⁻¹; ΔS _sub²⁹⁸=190±2 J mol⁻¹ K⁻¹. For the orthorhombic modification (form II), the saturated vapor pressure could only be studied at 391 K. Phase transition enthalpy at 298 K, ΔH _tr²⁹⁸(I→II)=2.0±0.4 kJ mol⁻¹, was derived as the difference between the solution enthalpies of the noted polymorphs in the same solution (methanol). Based on ΔH _tr²⁹⁸ (I→II), differences between temperature dependencies of heat capacities of both modifications and the vapor pressure value of form II at 391 K, the temperature dependence of saturated vapor pressure and thermodynamic sublimation parameters for modification II were also estimated (ΔG _sub²⁹⁸=56.1 kJ mol⁻¹; ΔH _sub²⁹⁸=115.9±0.9 kJ mol⁻¹; ΔS _sub²⁹⁸=200±3 J mol⁻¹ K⁻¹). The results indicate that the modifications are monotropically related, which is in contrast to findings recently reported found by classical thermochemical methods.     

Crystal structure and solid–solid phase transition of the complex (C<Subscript>11</Subscript>H<Subscript>18</Subscript>NO)<Subscript>2</Subscript>CuCl<Subscript>4</Subscript>(s)

The complex (C₁₁H₁₈NO)₂CuCl₄(s) was synthesized. Chemical analysis, elemental analysis, and X-ray crystallography were used to characterize the structure and composition of the complex. Low-temperature heat-capacities of the compound were measured by an adiabatic calorimeter in the temperature range from 77 to 400 K. A phase transition of the compound took place in the region of 297–368 K. Experimental molar heat-capacities were fitted to two polynomial equations of heat-capacities as a function of the reduced temperature by least square method. The peak temperature, molar enthalpy, and entropy of phase transition of the compound were calculated to be T _trs = 354.214 ± 0.298 K, Δ_trs H _m = 76.327 ± 0.328 kJ mol⁻¹, and Δ_trs S _m = 51.340 ± 0.164 J K⁻¹ mol⁻¹.     

Study on the thermodynamic properties of cholesterol

The standard molar enthalpy of combustion of cholesterol was measured at constant volume. According to value of Δ_r U _m^θ(−14358.4±20.65 kJ mol⁻¹), Δ_r H _m^θ(−14385.7 kJ mol⁻¹) of combustion reaction and Δ_f H _m^θ(2812.9 kJ mol⁻¹) of cholesterol were obtained from the reaction equation. The enthalpy of combustion reaction of cholesterol was also estimated by the average bond enthalpies. By design of a thermo-chemical recycle, the enthalpy of combustion of cholesterol were calculated between 283.15∼373.15 K. Besides, molar enthalpy and entropy of fusion of cholesterol was obtained by DSC technique.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Volumetric Properties of Ethylammonium Nitrate + <Emphasis Type="Italic">γ</Emphasis>-Butyrolactone Binary Systems: Solvation Phenomena from Density and Raman Spectroscopy

The densities of binary mixtures of ethylammonium nitrate (EAN) ionic liquid (IL) and γ-butyrolactone (BL) have been measured over the entire range of concentrations at 293.15, 298.15, 303.15, 308.15, 313.15 and 318.15 K and under ambient pressure. Experimental densities were used to calculate excess molar volumes V_m^EV_{m}^{\mathrm{E}}, isobaric and excess isobaric expansion coefficients α and α ^E. The excess molar volumes have both negative and positive values, while the excess isobaric expansion coefficients are negative over the entire composition range. The V_m^EV_{m}^{\mathrm{E}} values have been fitted to the Redlich-Kister polynomial equation, and other volumetric properties such as the partial molar volumes V _mi , the excess partial molar volume V^E_miV^{\mathrm{E}}_{mi} and the partial molar volumes at infinite dilution V^￥_miV^{\infty}_{mi} were calculated. The results have been interpreted in terms of dipole-dipole interactions, hydrogen bonds formation and structural factors of these mixtures. The FT-Raman spectroscopy study of the intensity variations of some characteristic bands such as the C=O stretching band at 1763 cm⁻¹, C–O symmetric stretching band at 932 cm⁻¹ and C–C stretching band at 872 cm⁻¹ of BL has been undertaken. The solvation phenomenon is evidenced by the modifications of these band intensities due to the presence of the IL ions. Moreover, the Raman spectroscopy corroborates the volumetric study. The average number of BL molecules in the primary solvation shell of the ethylammonium cation lies between 3 and 4 depending on the temperature.     

Charge-transfer interactions between nucleophilic compounds and chromatographic packings containing chemically bonded Cu(II) complexes

Summary Results are presented of studies of packings containing copper (II) acetylacetonate (acac), hexafluoroacetylacetonate (hfac), and chloride, chemically bonded via β-dik-etonate groups. The retention parameters retention factor (k) specific retention volume (V _g), and molecular retention index (M _e) were measured and used to calculate the thermodynamic parameters free energy of adsorption (ΔG _a) heat of adsorption (−ΔH _a), and entropy of adsorption (ΔS _a). These parameters enable, characterization of specific interactions between aromatic and cyclic hydrocarbons, ethers and thioethers and metal complexes chemically bonded, to a silica surface.     

Preparation and characterization of anion-cation surfactants modified montmorillonite

The low-temperature molar heat capacities of CoPc and CoTMPP were measured by temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 223 to 413 K for the first time. No phase transition or thermal anomaly was observed in the experimental temperature range for CoPc. However, a structural change was found to be nonreversible for CoTMPP in the temperature range of 368–403 K, which was further validated by the results of IR and XRD. The molar enthalpy ΔH _m and entropy ΔS _m of phase transition of the CoTMPP were determined to be 3.301 kJ mol⁻¹ and 8.596 J K⁻¹ mol⁻¹, respectively. The thermodynamic parameters of CoPc and CoTMPP such as entropy and enthalpy relative to reference temperature 298.15 K were derived based on the above molar heat capacity data. Moreover, the thermal stability of these two compounds was further investigated through TG measurements. Three steps of mass loss were observed in the TG curve for CoPc and five steps for CoTMPP.