Zn$_{1 - x}$Mg$_{x}$ O Homojunction-Based Ultraviolet Photodetector

Zn$_{1 - {x}}$ Mg$_{x}$ O p-n photodiodes were fabricated on (0001) sapphire substrates using a pulsed laser deposition technique with different Mg contents. Ti–Au and Ni–Au metals deposited using vacuum evaporation were used as n-type and p-type contacts, respectively. The X-ray diffraction analysis showed the Zn$_{1 - {x}}$Mg$_{x}$O double layers have a single phase hexagonal wurtzite structure. The optical bandgap of Zn$_{1 - {x}}$Mg$_{x}$O films has been tuned from 3.27 to 4.26 eV by increasing the Mg content ${x} =0.0$ to ${x}=0.34$. Correspondingly, the cutoff wavelength of the resultant detectors varies from 380 to 284 nm. Zn$_{1 - {x}}$Mg$_{x}$O p-n photodiodes with different Mg contents exhibit very good performance, with a very low dark current (${≪}$ 20 pA) at the bias voltage of 10 V. The ultraviolet to visible rejection ratio is more than three orders of magnitude.      

Impacts of $hbox{N}_{2}$ and $hbox{NH}_{3}$ Plasma Surface Treatments on High-Performance LTPS-TFT With High-$kappa$ Gate Dielectric

Low-temperature polycrystalline-silicon thin-film transistors (LTPS-TFTs) with high- $kappa$ gate dielectrics and plasma surface treatments are demonstrated for the first time. Significant field-effect mobility $mu_{rm FE}$ improvements of $sim$86.0% and 112.5% are observed for LTPS-TFTs with $hbox{HfO}_{2}$ gate dielectric after $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments, respectively. In addition, the $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments can also reduce surface roughness scattering to enhance the field-effect mobility $mu_{rm FE}$ at high gate bias voltage $V_{G}$, resulting in 217.0% and 219.6% improvements in driving current, respectively. As a result, high-performance LTPS-TFT with low threshold voltage $V_{rm TH} sim hbox{0.33} hbox{V}$, excellent subthreshold swing S.S. $sim$0.156 V/decade, and high field-effect mobility $mu_{rm FE} sim hbox{62.02} hbox{cm}^{2}/hbox{V} cdot hbox{s}$ would be suitable for the application of system-on-panel.      

Eigendecomposition of Images Correlated on $S^{1}$, $S^{2}$, and $SO(3)$ Using Spectral Theory

Eigendecomposition represents one computationally efficient approach for dealing with object detection and pose estimation, as well as other vision-based problems, and has been applied to sets of correlated images for this purpose. The major drawback in using eigendecomposition is the off line computational expense incurred by computing the desired subspace. This off line expense increases drastically as the number of correlated images becomes large (which is the case when doing fully general 3-D pose estimation). Previous work has shown that for data correlated on S ¹ , Fourier analysis can help reduce the computational burden of this off line expense. This paper presents a method for extending this technique to data correlated on S ² as well as SO(3) by sampling the sphere appropriately. An algorithm is then developed for reducing the off line computational burden associated with computing the eigenspace by exploiting the spectral information of this spherical data set using spherical harmonics and Wigner-D functions. Experimental results are presented to compare the proposed algorithm to the true eigendecomposition, as well as assess the computational savings.     

Chalcogenide As$_{2}$S$_{3}$ Suspended Core Fiber for Mid-IR Wavelength Conversion Based on Degenerate Four-Wave Mixing

A chalcogenide optical fiber of special design is proposed to convert a short-wavelength infrared radiation (around 2 $mu$m) up to a second transparency window of atmospheric air (around 4.5 $mu$ m) by degenerate four-wave mixing. The fiber supports a small core surrounded by three large air holes. The zero-dispersion wavelength is shifted down to 2 $mu$m in this fiber by properly tailoring the fiber core. We demonstrate by solving the nonlinear SchrÖdinger equation that efficient wavelength-conversion can be obtained by pumping the fiber with a Tm : SiO$_{2}$ pulsed fiber laser.      

Experimental Demonstration of Deeply-Etched SiO$_{2}$ Ridge Optical Waveguides and Devices

Deeply-etched ${hbox{SiO}}_{2}$ optical ridge waveguides are fabricated and characterized. A detailed discussion of the fabrication process (especially for the deep etching process) is presented. The measured propagation losses for the fabricated waveguides with different core widths range from $0.33sim {hbox {0.81}}~{hbox {dB}}/{hbox {mm}}$. The loss is mainly caused by the scattering due to the sidewall roughness. The losses in bending sections are also characterized, which show the possibility of realizing a small bending radius (several tens of microns). 1 $,times {rm N}$ ( ${rm N}=2$, 4, 8) multimode interference couplers based on the deeply-etched ${hbox{SiO}}_{2}$ ridge waveguide are also fabricated and show fairly good performances.      

Spectroscopy and Diode-Pumped Laser Experiments of LiLuF$_{bf 4}$:Tm$^{{bf 3}+}$ Crystals

In this work we report on the 2-${mbi mu}$m laser emission of LiLuF ${_{bf 4}}$ crystals doped with Thulium trivalent ions (Tm:LLF) at different doping density up to 16%. We will present our results regarding growth, absorption and emission spectroscopy, Judd–Ofelt analysis and room temperature diode pumping laser experiments as a function of the dopant density. The best result is 56% of slope efficiency, with a maximum output power of 280 mW. The emission wavelength ranges between 1985 and 2038 nm, exploiting the vibronic emission of Tm in LLF.      

A Comparative NBTI Study of $hbox{HfO}_{2}$, $hbox{HfSiO}_{x}$, and SiON p-MOSFETs Using UF-OTF $I_{rm DLIN}$ Technique

The time, temperature, and oxide-field dependence of negative-bias temperature instability is studied in $hbox{HfO}_{2}/hbox{TiN}$, $ hbox{HfSiO}_{x}/hbox{TiN}$, and SiON/poly-Si p-MOSFETs using ultrafast on-the-fly $I_{rm DLIN}$ technique capable of providing measured degradation from very short (approximately microseconds) to long stress time. Similar to rapid thermal nitrided oxide (RTNO) SiON, $hbox{HfO}_{2}$ devices show very high temperature-independent degradation at short (submilliseconds) stress time, not observed for plasma nitrided oxide (PNO) SiON and $hbox{HfSiO}_{x}$ devices. $hbox{HfSiO}_{x}$ shows lower overall degradation, higher long-time power-law exponent, field acceleration, and temperature activation as compared to $hbox{HfO}_{2}$, which are similar to the differences between PNO and RTNO SiON devices, respectively. The difference between $ hbox{HfSiO}_{x}$ and $hbox{HfO}_{2}$ can be attributed to differences in N density in the $hbox{SiO}_{2}$ IL of these devices.      

Fabrication and Characterization of Coplanar Waveguides on Silicon Using a Combination of SiO $_{2}$ and SRO $_{20}$

In this work, the use of silicon rich oxide (SRO) and chemical vapor deposition SiO$_{2}$ double layers as passivation films of coplanar waveguides (CPW) on high resistivity silicon (HR-Si) with an ${hbox{N}}^{+}$ backside is studied. The microwave performance of the fabricated CPWs is evaluated by computing the attenuation loss of the devices in the 0.045–50 GHz frequency range. Experimental results show that the ${hbox{N}}^{+}$ layer can be used without affecting CPW performance. Also, using a combined dielectric layer (SRO$_{20}$ /SiO$_{2}$ ), the attenuation losses are reduced compared to single dielectric layers.      

2 MHz AO $Q$ -switched ${rm TEM}_{00}$ Grazing Incidence Laser With 3 at.% Neodymium Doped Nd:YVO$_{4}$

We present a detailed experimental and theoretical study of the ultrahigh repetition rate AO $Q$ -switched ${rm TEM}_{00}$ grazing incidence laser. Up to 2.1 MHz $Q$-switching with ${rm TEM}_{00}$ output of 8.6 W and 2.2 MHz $Q$ -switching with multimode output of 10 W were achieved by using an acousto-optics $Q$ -switched grazing-incidence laser with optimum grazing-incidence angle and cavity configuration. The crystal was 3 at.% neodymium doped Nd:YVO$_{4}$ slab. The pulse duration at 2 MHz repetition rate was about 31 ns. The instabilities of pulse energy at 2 MHz repetition rate were less than ${pm}6.7hbox{%}$ with ${rm TEM}_{00}$ operation and ${pm}3.3hbox{%}$ with multimode operation respectively. The modeling of high repetition rate $Q$-switched operation is presented based on the rate equation, and with the solution of the modeling, higher pump power, smaller section area of laser mode, and larger stimulated emission cross section of the gain medium are beneficial to the $Q$-switched operation with ultrahigh repetition rate, which is in consistent with the experimental results.      

High-Performance Poly-Silicon TFTs Using a High-$k$ $hbox{PrTiO}_{3}$ Gate Dielectric

In this letter, a polycrystalline-silicon thin-film transistor (poly-Si TFT) with a high- $k$ $hbox{PrTiO}_{3}$ gate dielectric is proposed for the first time. Compared to TFTs with a $hbox{Pr}_{2}hbox{O}_{3}$ gate dielectric, the electrical characteristics of poly-Si TFTs with a $hbox{PrTiO}_{3}$ gate dielectric can be significantly improved, such as lower threshold voltage, smaller subthreshold swing, higher $I_{rm on}/I_{rm off}$ current ratio, and larger field-effect mobility, even without any hydrogenation treatment. These improvements can be attributed to the high gate capacitance density and low grain-boundary trap state. All of these results suggest that the poly-Si TFT with a high- $k$ $hbox{PrTiO}_{3}$ gate dielectric is a good candidate for high-speed and low-power display driving circuit applications in flat-panel displays.      

The Performance of Acoustic-Optical $Q$-switched Mode-Locking 1.34 $mu$m Nd:GdVO$_{4}$ Laser

A diode-end-pumped $Q$ -switched mode-locking $hbox{Nd:GdVO}_{4}$ laser operating at 1.34 $mu{hbox {m}}$ with an acousto-optical (AO) Q-switch in a compact V-type cavity was realized in our experiment for the first time. When the AO Q-switch repetition rate was 10 kHz, the maximum average output power of 750 mW and the pulse energy of 75 $muhbox{J}$ were obtained at the maximum incident pump power of 9 W. The mode-locking modulation depth of about 100% was obtained at certain pump power over the threshold. The mode-locked pulse inside in the $Q$-switched pulse had a repetition rate of 341 MHz, and its average pulsewidth was estimated to be about 350 ps. A developed rate equation model for the $Q$ -switched and mode-locked lasers with an AO Q-switch were proposed by using the hyperbolic secant functional methods. The results of numerical calculations of the rate equations were in good agreement with the experimental results.      

Near-Stoichiometric Ti : LiNbO$_{3}$ Strip Waveguides Fabricated by Standard Ti Diffusion and Post-VTE

We report near-stoichiometric (NS) Ti : LiNbO$_{3}$ waveguides fabricated by indiffusion of 4-, 5-, 6-, 7- $mu{hbox {m}}$-wide 120-nm-thick Ti-strips at 1060 $^{circ}hbox{C}$ for 10 h into a congruent $hbox{LiNbO}_{3}$ (i.e., standard Ti diffusion procedure) and post-vapour-transport-equilibration (VTE) treatment at 1100 $^{circ}hbox{C}$ for 5 h. These waveguides are NS and single-mode at 1.5 $mu{hbox {m}}$, and have a loss of 1.0/0.8 dB/cm for the TM/TE mode. In the width/depth direction of the waveguide, the mode field follows a Gauss/Hermite–Gauss profile, and the Ti profile follows a sum of two error functions/a Gauss function. The post-VTE resulted in increase of diffusion width/depth by 2.0/1.0 $mu{hbox {m}}$. A two-dimensional refractive index profile in the guiding layer is suggested.      

Optimal $ Sigma Delta$ Modulator Architectures for Fractional-$ {N}$ Frequency Synthesis

This paper presents a comparative study of $Sigma Delta$ modulators for use in fractional-$ {N}$ phase-locked loops. It proposes favorable modulator architectures while taking into consideration not only the quantization noise of the modulator but also other loop nonidealities such as the charge pump current mismatch that contributes to the degradation in the synthesized tone's phase noise. The proper choice of the modulator architecture is found to be dependent upon the extent of the nonideality, reference frequency, and loop bandwidth. Three modulator architectures are then proposed for low, medium, and high levels of nonidealities.      

Efficient Frequency Doubling of a Low-Power Femtosecond Er-Fiber Laser in BiB$_{3}$ O$_{6}$

BiB₃O₆ (BIBO) crystal has been used for efficient second-harmonic generation (SHG) of a low-power femtosecond Er-fiber laser-amplifier system operating at 56 MHz. At the maximum input power of 65 mW, an internal conversion efficiency of 23% was achieved for SHG at 782 nm, with a pulse duration of 64 fs. A comparison with beta-BaB₂O₄ reveals superior properties of BIBO for such ultrashort-pulse ultra-broadband SHG.     

Multiwavelength $Q$-switched Laser by Incorporating a LiNbO$_{3}$ Phase Modulator in Fabry–PÉrot Cavity

In this letter, we present a simple and compact laser cavity that can be used for $Q$-switching and multiwavelength oscillation. It is shown that a LiNbO $_{3}$ phase modulator with relatively low driven voltage inserted into a Fabry–PÉrot cavity can act simultaneously as an effective component for suppressing the homogeneous line broadening, switching the $Q$ -value of the laser cavity, and a polarizer. Multiwavelength operation of Yb-doped fiber laser is achieved by phase modulation. $Q$-switching is achieved due to the residual intensity modulation of the phase modulator, and the pulse performance is also impacted by the phase modulation amplitude. Three stable wavelengths with identical wavelength spacing of 3.3 nm and pulsed laser of 0.2 $mu$J per pulse energy at the repetition rate of 55.8 kHz are demonstrated. The full-width at half-maximum pulse duration is of 2 $mu$s, and the polarization extinction ratio is $>$23 dB.      

High-Quality Grouped-Wavelength Conversion and Dynamic Switching Using Multiple-QPM LiNbO $_{3}$ and TLA

We demonstrate dynamic grouped-wavelength conversion using multiple quasi-phase-matched LiNbO$_{3}$ modules and a tunable laser diode array. A high signal-to-noise ratio of larger than 45 dB is obtained for the converted signals. The power penalty of the wavelength converter is confirmed to be less than 0.2 dB.      

Explosively Consolidated Powder-In-Tube MgB$_{2}$ Superconductor Aided by Post-Thermal Treatment

A MgB₂ superconductor was prepared from Mg flakes or powders and B powders using the powder-in-tube technique with explosive consolidation. Compaction of Mg and B powders resulted in a two-phase alloy, due to the relatively low temperature developed during compaction as well as the very short duration of the process. Formation of MgB₂ was obtained after subsequent heat treatment in argon atmosphere at a maximum temperature of 950degC.     

High-Performance $hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ -Channel MOSFETs With High-$kappa$ Gate Dielectrics and $alpha$-Si Passivation

Long and short buried-channel $hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ MOSFETs with and without $alpha$-Si passivation are demonstrated. Devices with $alpha$-Si passivation show much higher transconductance and an effective peak mobility of 3810 $hbox{cm}^{2}/ hbox{V} cdot hbox{s}$. Short-channel MOSFETs with a gate length of 160 nm display a current of 825 $muhbox{A}/muhbox{m}$ at $V_{g} - V_{t} = hbox{1.6} hbox{V}$ and peak transconductance of 715 $muhbox{S}/muhbox{m}$. In addition, the virtual source velocity extracted from the short-channel devices is 1.4–1.7 times higher than that of Si MOSFETs. These results indicate that the high-performance $hbox{In}_{0.7}hbox{Ga}_{0.3} hbox{As}$-channel MOSFETs passivated by an $alpha$ -Si layer are promising candidates for advanced post-Si CMOS applications.      

Compact Variable ${rm TE}$-${rm TM}$ Polarization Splitter Based on Simplified Coherent Coupling in Lithium Niobate

A compact-sized electrically tunable ${rm TE}$- ${rm TM}$ mode splitter composed of a mode converter and an asymmetric Y-branch structure is presented. The asymmetric Y-branch consists of a straight and a bent waveguides to split two polarization modes based on the mode-sorting effect. To shorten the device length, a simplified coherently coupled-bending structure is utilized for the bent waveguide. Experimental results show that the device length is reduced about 52%, extinction ratios of both ${rm TE}$ and ${rm TM}$ modes are higher than 25 dB, yet the applied voltage is not significantly increased.