A model for cation adsorption to clays and membranes

A cation adsorption model is presented and its recent applications are discussed. The model combines electrostatic equations with specific binding, and considers neutral and positively charged complexes between the negative surface sites and organic cations in a closed system. Extensions in the model account for dye aggregation in solution, and for the formation of solution complexes of inorganic cations, such as [M⁺⁺ Cl^–]⁺. The amounts of 45Ca²⁺ adsorbed to vesicles extracted from the plasma membranes of melon root cells could be adequately simulated and predicted. The binding coefficients determined for Ca²⁺, Na⁺, and Mg²⁺ are in the range of values previously deduced for binding to phospholipid components. Model calculations were applied to the test of hypotheses on the effect of salt stress on the growth of roots. The adsorption of monovalent organic cations to montmorillonite is characterized by binding coefficients that are at least six orders of magnitude larger than those of Na⁺, Mg²⁺, Ca²⁺, and Cd²⁺, or those of CdCl⁺ or CaCl⁺. Monovalent organic cations were found to adsorb 140–200% of the cation exchange capacity of the clay and to cause charge reversal. Deductions from adsorption results of acriflavin are consistent with those drawn from the application of other experimental methods. Preliminary results on the adsorption of divalent organic cations are presented. Agro-environmental applications of organo-clays are discussed.     

Comparison of Ca2+ and Mg2+ binding to calmodulin. An enthalpy,entropy, and gibbs free energy analysis

A consistent set of G _B , H _B , and S _B parameters have been determined from ion specific electrode, calorimetric, and spectrophotometric studies for the binding of Ca²⁺ and Mg²⁺ to bovine calmodulin at pH=7.0 and an ionic strength I of 0.113M. A non-linear least squares analysis of calcium specific ion electrode data yields, on a molar basis, four calcium dissociation constants: 10^–7 for the first site, 10^–5 for the fourth site, and two constants between these values. Both calorimetric experiments and an indicator method provide evidence that Mg²⁺ binds to calmodulin, probably at the same sites as Ca²⁺, but with affinities about 100 times smaller: 4×10^–5 for the first site and 2×10^–3 for the fourth. Calorimetric titrations on Ca²⁺ binding to calmodulin in three buffers are consistent with 0.46 protons released upon binding at all four sites and yield an average H _B per site of 5.6 and 7.9 kJ-mol^–1 for Ca²⁺ and Mg²⁺, respectively. The entropy of the system increases by 524 and 361 J-K^–1-mol^–1 when Ca²⁺ and Mg²⁺, respectively, bind to four sites on calmodulin, i.e., the selectivity of calmodulin for Ca²⁺ is primarily derived from entropy effects. Further analysis based on elimination of the entropy term for the metal ions demonstrates that calmodulin bound to Ca²⁺ has a larger entropy than the unbound calmodulin; the opposite is true for calmodulin bound to Mg²⁺. These analyses are consistent with the hypothesis that Ca²⁺ forms tight complexes at all sites on calmodulin and that release of waters of hydration upon binding is the source of the increase of entropy in the system.     

新型吸附剂的合成、表征及其对Ni(II)的吸附研究

利用滴加法合成了球形含Ni^2＋交联壳聚糖, 并通过胺化引入大量活性氨基, 再经除镍制成对重金属镍离子具有较好吸附能力的新型吸附剂[P-C-CTS(Ni)]. 通过Ni^2＋吸附容量的测定, IR及XPS分析, 验证了合成技术路线的正确性. 通过研究pH值对吸附量的影响, 初步讨论了无柠檬酸根(Cit)配位体存在时, 吸附剂对Ni(II)的吸附为螯合作用. 通过Cit存在条件下(c_Ni＝c_Cit＝0.852 mmol•L^－1), 吸附剂对Ni(II)离子和Cit的吸附量随pH值的变化, 结合相应pH值下金属镍的形态分布, 探讨了其对Ni(II)的吸附机理, 研究认为不仅仅是简单的螯合作用, 其吸附机理和吸附量与溶液中金属离子的存在形式有关, 引入静电吸附原理解释了吸附剂对Ni(II)的吸附现象.     

八肋游仆虫中心蛋白N-端半分子与Tb3+，Ca2+的结合

用分子生物学方法表达、纯化了游仆虫中心蛋白及N-端半分子，用铽荧光探针法、离子竞争法研究了pH 7.4，0.01 mol· L^-1 Hepes条件下中心蛋白与铽、钙的结合性质。结果表明中心蛋白有4个铽结合部位，其中2个为高亲合结合部位、2个为低亲合结合部位。具有2个低亲合结合部位的中心蛋白半分子与铽结合的条件常数是(2.13±0.10)×10⁵ L·mol^-1，与钙结合的条件常数是(7.52±0.02)×10² L·mol^-1。     

Highly efficient adsorption of Cr(VI) from aqueous solution by Fe3+ impregnated biochar

Biochar (BC) has been widely used as a low-cost adsorbent for the removal of contaminants from water and soil. However, the adsorption ability of BC towards heavy metal oxyanions (e.g., Cr(VI)) is relatively low due to the negatively charged surface of BC. In this study, pristine BC was impregnated with Fe³⁺ to improve its Cr(VI) adsorption capability. Fe³⁺-impregnated BC (Fe³⁺-BC) was successfully synthesized by a simple impregnation method and used for the removal of Cr(VI) from aqueous solution. Various factors affecting the adsorption, such as impregnation ratio, pH, adsorbent dosage, contact time, temperature, and the presence of humic acid, were investigated in detail. Results showed that Fe³⁺-BC had strong adsorption ability to Cr(VI) with a maximum adsorption capacity of 197.80 mg/g, which were not only significantly higher than that of the pristine BC, but also were superior to many previously reported adsorbents. It was favorable for Cr(VI) adsorption under the condition of acidic and high temperature. The adsorption data obeyed Sips and Langmuir isotherms and the kinetic data were well described by the pseudo-first-order kinetic model. The results herein revealed that the Fe³⁺-impregnated BC had a good potential as a highly efficient material for adsorption of Cr(VI) from aqueous solution.     

Quantum Chemical Calculations on the Structure and Adsorption Properties of NO and N2O on Ag+ and Cu+ Ion-Exchanged Zeolites

Ab initio cluster quantum chemical calculations at the Hartree–Fock (HF/Lanl2dz) and correlated second-order Moller–Plesset perturbation theory (MP2/Lanl2dz) levels were performed for NO and N₂O interactions with Ag⁺ and Cu⁺ ion-exchanged zeolites. The interaction energies were estimated in a conventional way and also corrected for basis set superposition errors. It was shown that the highly dispersed Ag⁺ counterions establish twofold coordination to the lattice oxygens on the zeolite surface, similar to the case of Cu⁺ ions. However, both NO and N₂O bind relatively strongly to the Cu active sites of Cu⁺ ion-exchanged zeolites than those of the Ag⁺ site of the Ag⁺ ion-exchanged zeolites. Based on the results of these calculations, the two different forms of adsorption for these molecules on the catalyst surface, the nature of their binding and characteristics of the adsorption properties have been discussed. Finally, some comparisons with the results obtained by a variety of density functional theory calculations on target systems have been presented.     

Translocation of Ca2+ across lipid bilayer membrane due to defects induced by teleocidin

The effect of defects in a dipalmitoylphosphatidylcholine (DPPC) membrane on Ca²⁺ permeability across the membrane was studied. Addition of teleocidin to a suspension of DPPC vesicles encapsulating Quin 2 increased the fluorescence intensity of Quin 2. Change of fluorescence intensity was significant below the phase-transition temperature of the membrane, and increased according to the kind of divalent metal ions in the medium in the order of Mg²⁺2+2+. It was confirmed that DPPC vesicles did not change the vesicular structure upon binding teleocidin to the membrane. Therefore, the fluorescence increase below the phase-transition temperature was ascribed to the influx of divalent cations into DPPC vesicles through cracks formed in the membrane upon distribution of teleocidin. By contrast, 12-0-tetradecanoylphorbol-13-acetate (TPA) did not change the fluorescence intensity of Quin 2 significantly. It should be noted that teleocidin, which located at the membrane surface, yielded more significant defects across the lipid membrane than TPA, which was incorporated into the hydrophobic core of the membrane.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

The effect of metallic cations on the electrophoretic properties of a pretreatedHevea latex

High-ammonia latex concentrate prepared from doubly-centrifuged fieldHevea latex was exhaustively dialysed to remove any residual water-soluble non-rubber constituents. The electrophoretic mobilities of the dialysed latex in the presence of various metallic cations were investigated as a function of electrolyte concentration. The mobility decreased with increasing concentration of the cations Na⁺, Ba²⁺, Mg²⁺ and Ca²⁺ in a manner consistent with the effect of simple electrolyte on compression of the electric double layer. Anomalous behaviour was noted for the divalent ion copper, in that it reversed the charge of the latex particles at a concentration even lower than that of uranyl ions. Multivalent cations (lanthanum, cerium and thorium) had a profound influence on the latex particles where very low charge reversal concentrations were observed. It is believed that strong adsorption of hydrolysed species from the metallic ions was responsible for reversing the charge of the originally negative latex particles. These experiments indicated that the efficiency with which the cations reversed the charge of the latex particle surface was in the order: lanthanum > cerium > copper > thorium > uranyl > calcium > magnesium > barium > sodium. The number of cation binding sites on the latex particle surface and the chemical free energies of cation adsorption were calculated. It was found that the interaction of the latex particle with the hydrolysable metallic cations was much more stronger than that with the simple divalent cations and that this intercation was comparable to that of biological surfaces.     

Hydrogen bond interactions at the TiO2 surface: Their contribution to the pH dependent photo-catalytic degradation of p-nitrophenol

We have obtained pK_a values of p-nitrophenol–TiO₂ by measuring the adsorption equilibrium constants of p-nitrophenol (PNP) on the TiO₂ surface at different pH values. These values have been obtained from Langmuir isotherms and from a plot of 1/rate vs. 1/[PNP]_o obtained during TiO₂ catalyzed solar light photo-degradation of PNP. Two limit equilibrium constants are readily obtained depending on the solution pH: at pH 5 at which the TiO₂ surface is mainly positively charged and at pH 8 when it is negatively charged. With these and other adsorption equilibrium constants and the PNP pK_a value in solution, thermodynamic cycles are established in order to obtain the PNP pK_a when it is adsorbed on positively charged, neutral and negatively charged TiO₂ surfaces. From these pK_a values useful information on the PNP–TiO₂ interaction is readily obtained. For instance, the PNP nitro group interacts with the TiO₂ surface via a hydrogen bond, arising from the complex of water molecules with the Ti⁴⁺ ions on its surface. The weaker the hydrogen bond donor, the stronger the oxygen nitro group basicity. Therefore, pK_a changes on the phenolic hydroxyl group result from these interactions. Linear free energy correlations, maximum PNP adsorption capacity values (Q_L) and FTIR ATR, spectrum support this proposal. A k_obs vs. pH degradation profile of p-nitrophenol is also provided.     

Electrochemiluminescence immunosensor for ultrasensitive detection of biomarker using Ru(bpy)3-encapsulated silica nanosphere labels

Here, we describe a new approach for electrochemiluminescence (ECL) assay with Ru(bpy)₃²⁺-encapsulated silica nanoparticle (SiO₂@Ru) as labels. A water-in-oil (W/O) microemulsion method was employed for one-pot synthesis of SiO₂@Ru nanoparticles. The as-synthesized SiO₂@Ru nanoparticles have a narrow size distribution, which allows reproducible loading of Ru(bpy)₃²⁺ inside the silica shell and of α-fetoprotein antibody (anti-AFP), a model antibody, on the silica surface with glutaraldehyde as linkage. The silica shell effectively prevents leakage of Ru(bpy)₃²⁺ into the aqueous solution due to strong electrostatic interaction between the positively charged Ru(bpy)₃²⁺ and the negatively charged surface of silica. The porous structure of silica shell allowed the ion to move easily through the pore to exchange energy/electrons with the entrapped Ru(bpy)₃²⁺. The as-synthesized SiO₂@Ru can be used as a label for ultrasensitive detection of biomarkers through a sandwiched immunoassay process. The calibration range of AFP concentration was 0.05-30 ng mL⁻¹ with linear relation from 0.05 to 20 ng mL⁻¹ and a detection limit of 0.035 ng mL⁻¹ at 3σ. The resulting immunosensors possess high sensitivity and good analytical performance.     

铜转运蛋白C端金属结合域与Ag+及Hg2+的相互作用

铜转运蛋白(CTR1)不仅参与铜的细胞摄取,而且在其它重金属离子的摄取过程中也发挥重要作用. 本文采用紫外-可见(UV-Vis)光谱,核磁共振(NMR)和质谱(MS)的方法,研究了人源CTR1 (hCTR1)的C端金属结合域(C8)与Ag⁺和Hg²⁺的相互作用. 研究表明,Ag⁺和Hg²⁺都能与C8结合,但二者与C8的结合机制明显不同. 每个C8分子可以结合两个Ag⁺离子,但一个Hg²⁺却可以与两个C8形成桥联. 此外,Ag⁺离子与C8的配位是一个中等速度的交换过程,而Hg²⁺离子则为快速交换过程. C8的半胱氨酸残基是两种离子的重要结合位点,同时组氨酸残基也参与两种金属离子的配位,其中Ag⁺优先结合组氨酸,而Hg²⁺则对半胱氨酸的结合具有显著的优势. 虽然HCH基序对C8 与金属配位至关重要,一些远端的其它氨基酸也可以参与C8 与银离子的配位,这可能与CTR1 在摄取Ag⁺过程中的金属转移机制相关. 这些结果为理解hCTR1 蛋白摄取重金属离子的作用机制提供了必要的信息.     

Simple approach to study biomolecule adsorption in polymeric microfluidic channels

Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor^®) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor^® substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor^®, and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and neutral, hydrogel-like film with polyethylene glycol (PEG) characteristics. This simple analytical approach adds to the fundamental understanding of the interaction forces in real, microfluidic systems. This method provides a straightforward and rapid way to screen surface compositions and chemistry, and relate these to their effects on the sensitivity and resistance to non-specific binding of bioassays using them. In an additional set of experiments, the surface area of the channels in this universal microfluidic chip was increased by precision milling of microscale trenches. This modified surface was then coated with APTES and tested for its potential to serve as a unique protein dilution feature.     

A confocal study of mechanism of 5-hydroxytryptamino induced intracellular calcium dynamics in cultured rat stomach fundus smooth muscle cells with a new Ca2+ indicator STDln-AM

A new fluorescent Ca²⁺ indicator STDln-AM for detecting [Ca²⁺], transients in cultured smooth muscle cells is presented. By making a comparison, the difference between STDln and fluo-3 is discussed in detail. Using the new Ca²⁺ indicator, the mechanism of 5-hydroxytryptamino (5-HT) induced intracellular calcium dynamics in stomach fundus smooth muscle cells (SFSMC) of rats is investigated. It is shown that in contrast with fluo-3, STDln is uniformly distributed in the cytosolic compartment but excluded from the nucleus, when it is transfected into cells. This feature makes it a real cytosol Ca²⁺ indicator and can reflect changes of cytosol [Ca²⁺] more accurately than that of fluo-3. In addition, STDln responds to the [Ca²⁺], transients more sensitive and faster than fluo-3. The results also show that, the L-type Ca²⁺ channel inhibitor Mn9202 and the PLC inhibitor Compound 48/80 can significantly inhibit the [Ca²⁺], elevation induced by 5-HT, while the PKC inhibitor D-Sphingosine can enhance the effect of 5-HT. The results suggest that 5-HT acts by the way of 5-HT₂ receptors on SFSMC, then through 5-HT₂ receptors coupled IP₃/Ca²⁺ and GC/PKC double signal transduction pathways to make Ca²⁺ release from intracellular Ca²⁺ stores and Ca²⁺ influx possibly through L-type calcium channels.     

Thermal Study of Surfactant and Anion Adsorption on Clinoptilolite

The mechanism of surfactant adsorption on various forms of clinoptilolite was studied by DTA, TG and DTG analyses. The examined series of surfactant modified clinoptilolite (SMC) was previously prepared by the adsorption of the surface-active oleylamine on Ca²⁺, Na⁺, H⁺ and mechanochemically treated forms of clinoptilolite. The oleylamine was most strongly adsorbed on H⁺-forms of clinoptilolite due to the largest number and strength of adsorption sites. The surfactant adsorption mechanism on H⁺-form of clinoptilolite was studied by recording the series of variously surfactant-loaded samples. The products of sulphate, dihydrogenphosphate and hydrogenchromate adsorption on SMC were analyzed by DTA, TG and DTG in order to investigate the mechanism of anion adsorption.This revised version was published online in November 2005 with corrections to the Cover Date.     

Exploring the Dual Characteristics of CH3OH Adsorption to Metal Atomic Structures on Si (111)-7 × 7 Surface

Metal atoms were deposited on an Si (111)-7 × 7 surface, and they were adsorbed with alcohol gases (CH₃OH/C₂H₅OH/C₃H₇OH). Initially, C_nH_2n+1OH adsorption was simply used as an intermediate layer to prevent the chemical reaction between metal and Si atoms. Through scanning tunneling microscopy (STM) and a mass spectrometer, the C_nH_2n+1OH dissociation process is further derived as the construction of a surface quasi-potential with horizontal and vertical directions. With the help of three typical metal depositions, the surface characteristics of CH₃OH adsorption are more clearly presented in this paper. Adjusting the preheating temperature, the difference of thermal stability between CH₃O^– and H⁺ could be obviously derived in Au deposition. After a large amount of H⁺ was separated, the isolation characteristic of CH₃O^– was discussed in the case of Fe deposition. In the process of building a new metal-CH₃O^–-H⁺ model, the dual characteristics of CH₃OH were synthetically verified in Sn deposition. CH₃O^– adsorption is prone to influencing the interaction between the metal deposition and substrate surface in the vertical direction, while H⁺ adsorption determines the horizontal behavior of metal atoms. These investigations lead one to believe that, to a certain extent, the formation of regular metal atomic structures on the Si (111)-7 × 7-CH₃OH surface is promoted, especially according to the dual characteristics and adsorption models we explored.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.     

Adsorption monitoring of phospho-l-serine on hydroxyapatite

The adsorption of the aminoacid phospho-l-serine (PLS) on the surface of hydroxyapatite {Ca₅(PO₄)₃OH, HAP}, was investigated using streaming potential measurements. Solutions saturated with respect to HAP, containing different concentrations of PLS, were brought in contact under carefully controlled flow conditions through plugs made of well dispersed HAP powder. The measurement of PLS adsorption during the equilibration of the solute with the HAP substrate, showed a plateau regime corresponding, according to geometrical considerations, to monolayer surface coverage. The PLS uptake measurements on HAP suggested that it is possible to monitor in situ adsorption during the monolayer surface coverage measuring the streaming potential of HAP. Analysis of the surface potential measurements suggested that during the monolayer surface coverage step, the negatively charged (HL^2?) PLS species were adsorbed. The adsorbed HL^2? was located at the inner Helmholtz plane of the electrical double layer, forming surface complexes with the positively charged ≡CaOH ₂ ⁺ sites on the surface of HAP. The rate constants of adsorption and desorption were calculated from the kinetics of adsorption of PLS on HAP.     

Isomerization ofn-butane on the SO4/ZrO2 catalyst promoted by IV Period metals

The catalytic activity of superacidic systems based on SO₄/ZrO₂ and modified by IV Period metals in isomerization ofn-butane was studied. At low temperatures of the reaction, the introduction of Fe³⁺, Sc³⁺, Co²⁺, or Zn²⁺ ions (1%) increases the yield of isobutane by 1.5 times due to the activation ofn-butane on the sites created by the promoting ions. The addition of Cr³⁺, V⁴⁺, or Mn²⁺ (1%) decreases the catalytic activity because of a decrease in the catalyst acidity, most likely, due to the reduction of surface sulfur species. The influence of the nature of the support and surface additives of SiO₂, TiO₂, and ZrO₂ on the activity and selectivity of the catalytic system inn-butane isomerization was studied. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7 pp. 1276–1280, July, 1999     

Ethylene glycol assisted preparation of Ti-modified polydopamine coated magnetic particles with rough surface for capture of phosphorylated proteins

The reversible protein phosphorylation is very important in regulating almost all aspects of cell life, while the enrichment of phosphorylated proteins still remains a technical challenge. In this work, polydopamine (PDA) modified magnetic particles with rough surface (rPDA@Fe₃O₄) were synthesized by introduction of ethylene glycol in aqueous solution. The PDA coating possessing a wealth of catechol hydroxyl groups could serve as an active medium to immobilize titanium ions through the metal-catechol chelation, which makes the fabrication of titanium ions modified rPDA@Fe₃O₄ particles (Ti⁴⁺-rPDA@Fe₃O₄) simple and very convenient. The spherical Ti⁴⁺-rPDA@Fe₃O₄ particles have a surface area of 37.7 m² g⁻¹ and superparamagnetism with a saturation magnetization value of 38.4 emu g⁻¹. The amount of Ti element in the particle was measured to be 3.93%. And the particles demonstrated good water dispersibility. The particles were used as adsorbents for capture of phosphorylated proteins and they demonstrated affinity and specificity for phosphorylated proteins due to the specific binding sites (Ti⁴⁺). Factors affecting the adsorption of phosphorylated proteins on Ti⁴⁺-rPDA@Fe₃O₄ particles were investigated. The adsorption capacity of Ti⁴⁺-rPDA@Fe₃O₄ particles for κ-casein was 1105.6 mg g⁻¹. Furthermore, the particles were successfully applied to isolate phosphorylated proteins in milk samples, which demonstrated that Ti⁴⁺-rPDA@Fe₃O₄ particles had potential application in selective separation of phosphorylated proteins.