Germania nanoparticles and nanocrystals at room temperature in water and aqueous lysine sols

Facile synthesis of nanometer-sized germania crystals and amorphous germania nanoparticles (ca. 1 nm) is investigated through hydrolysis of germanium tetraethoxide and subsequent condensation of germania in both pure water and aqueous lysine solutions. Germanium tetraethoxide rapidly hydrolyzes in pure water, leading to solvated germanate species at lower germania concentrations and the onset of nanometer-sized germania crystals at room temperature with increasing germania content. In the presence of the basic amino acid L-lysine, amorphous germania nanoparticles (ca. 1 nm) spontaneously form with increasing germania content and coexist with nanometer-sized germania crystals at higher germania concentrations. Lysine and germania concentration both influence crystallite size and morphology (i.e., polyhedral, cubic). The facile, room-temperature crystallization of germania in the presence and absence of lysine is striking. The fact that the crystal morphology shows no signs of nanoparticle aggregative assembly, as has been observed in the formation of other oxide crystals, suggests that crystal growth takes place by addition of dissolved species rather than nanoparticles, and could have implications for other oxide systems.     

Green synthesis of water-dispersible silver nanoparticles at room temperature using green carambola (star fruit) extract

Journal of Sol-Gel Science and Technology - Silver nanoparticles (AgNPs) dispersible in water were synthesized at room temperature in the presence of carambola fruit extract at different pH. The...     

Ring stain effect at room temperature in silver nanoparticles yields high electrical conductivity

We demonstrate that metallic rings formed spontaneously at room temperature via evaporation of aqueous drops containing silver nanoparticles (20-30 nm in diameter) exhibit high electrical conductivity (up to 15% of that for bulk silver). The mechanism underlying this self-assembly phenomena is the "ring stain effect", where self-pinning is combined with capillary flow to form a ring consisting of close-packed metallic nanoparticles along the perimeter of a drying droplet. Our macroscopic and microscopic (applying conductive atomic force microscopy) transport measurements show that the conductivity of the ring, which has a metallic brightness, is orders of magnitude larger than that of corresponding aggregates developed without the ring formation, where high conductivity is known to appear only after annealing at high temperature.     

Facile synthesis of PbTe nanoparticles and thin films in alkaline aqueous solution at room temperature

A novel, simple, and cost-effective route to PbTe nanoparticles and films is reported in this paper. The PbTe nanoparticles and films are fabricated by a chemical bath method, at room temperature and ambient pressure, using conventional chemicals as starting materials. The average grain size of the nanoparticles collected at the bottom of the bath is ∼25 nm. The film deposited on glass substrate is dense, smooth, and uniform with silver gray metallic luster. The film exhibits p-type conduction and has a moderate Seebeck coefficient value (∼147 μV K⁻¹) and low electrical conductivity (∼0.017 S cm⁻¹). The formation mechanism of the PbTe nanoparticles and films is proposed.     

A novel one step synthesis of silver nanoparticles using room temperature ionic liquid and their biocidal activity

This article reports the synthesis of silver Nan particles (SNPs) using 1-(dodecyl) 2 amino-pyridinium bromide ionic liquid. This is a new one phase method for the synthesis of uniform monodispersed crystalline silver nanoparticles in a water-ionic liquid system. In this work, the functionalized room temperature IL acts as stabilizing agent and solvent. Hydrazine hydrate acts as reducing agent. To the best of our knowledge, there is no report of the synthesis of metal nanoparticles using this ionic liquid. The synthesis of silver nanoparticles is very primarily studied by UV-Visible spectroscopic analysis. The TEM and particle size distribution was used to study morphology and size of the particles. The charge on synthesized SNPs was determined by Zeta potential. The silver nanoparticles have been known to have inhibitory and bactericidal effect. The investigation of antibacterial activities of ionic liquid stabilized silver nanoparticles was performed by measurement of the minimum inhibitory concentration.     

Shape-controllable synthesis of dendritic silver nanostructures at room temperature

In this communication, we demonstrated a simple chemical approach for preparing dendritic silver nanostructures by mixing AgNO₃ aqueous and o-phenylenediamine in the presence of NaCl solutions at room temperature. o-Phenylenediamine was found to act as a stabilizer as well as a reduction agent. Asformed silver dendrites were examined by scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, and Fourier transform infrared spectroscopy techniques. We found that the concentration of NaCl strongly influenced the shape of silver structures. The forming AgCl serve as efficient etchant and also produces single-crystal seeds. The possible formation mechanism is also discussed.     

Reversible photoswitching of ferromagnetic FePt nanoparticles at room temperature

There has been a great interest in developing photoswitchable magnetic materials because of their possible applications for future high-density information storage media. In fact, however, the examples reported so far did not show ferromagnetic behavior at room temperature. From the viewpoint of their practical application to magnetic recording systems, the ability to fix their magnetic moments such that they still exhibit room-temperature ferromagnetism is an absolute requirement. Here, we have designed reversible photoswitchable ferromagnetic FePt nanoparticles whose surfaces were coated with azobenzene-derivatized ligands. On the surfaces of core particles, reversible photoisomerization of azobenzene in the solid state was realized by using spacer ligands that provide sufficient free volume. These photoisomerizations brought about changes in the electrostatic field around the core-FePt nanoparticles. As a result, we have succeeded in controlling the magnetic properties of these ferromagnetic composite nanoparticles by alternating the photoillumination in the solid state at room temperature.     

Oriented attachment-based assembly of dendritic silver nanostructures at room temperature

How particles aggregate into an interesting dendritic structure has been the object of research for many years because of its importance in understanding physical processes involved and in designing novel materials. In this work, we for the first time describe an oriented attachment-based assembly mechanism for formation of different types of dendritic silver nanostructures at room temperature. It is found that the concentration of both AgNO(3) and p-aminoazobenzene (PA) molecules has a significant effect on the formation and growth of these novel nanostructures. Characterization by transmission electron microscopy (TEM) clearly shows that the dendritic silver nanostructures can be obtained through the preferential oriented growth along a crystallographically special direction. Interestingly, we observe that the oriented attachment at room temperature can also take place between relatively large single-crystalline silver particles with a diameter range from 20 to 60 nm, which may provide a new possibility for the design of novel metal nanostructures by using large metal nanoparticles as building blocks at room temperature. Moreover, a surface-enhanced Raman scattering (SERS) technique is used to investigate the role of PA molecules during the growth of the dendritic silver nanostructures.     

Biosynthesis, purification and characterization of silver nanoparticles using Escherichia coli

The application of nanoscale materials and structures, usually ranging from 1 to 100 nanometers (nm), is an emerging area of nanoscience and nanotechnology. Nanomaterials may provide solutions to technological and environmental challenges in the areas of solar energy conversion, catalysis, medicine, and water-treatment. The development of techniques for the controlled synthesis of nanoparticles of well-defined size, shape and composition, to be used in the biomedical field and areas such as optics and electronics, has become a big challenge. Development of reliable and eco-friendly processes for synthesis of metallic nanoparticles is an important step in the field of application of nanotechnology. One of the options to achieve this objective is to use ‘natural factories’ such as biological systems. This study reports the optimal conditions for maximum synthesis of silver nanoparticles (AgNPs) through reduction of Ag⁺ ions by the culture supernatant of Escherichia coli. The synthesized silver nanoparticles were purified by using sucrose density gradient centrifugation. The purified sample was further characterized by UV–vis spectra, fluorescence spectroscopy and TEM. The purified solution yielded the maximum absorbance peak at 420 nm and the TEM characterization showed a uniform distribution of nanoparticles, with an average size of 50 nm. X-ray diffraction (XRD) spectrum of the silver nanoparticles exhibited 2θ values corresponding to the silver nanocrystal. The size-distribution of nanoparticles was determined using a particle-size analyzer and the average particle size was found to be 50 nm. This study also demonstrates that particle size could be controlled by varying the parameters such as temperature, pH and concentration of AgNO₃.     

Biosynthesis of silver nanoparticles using citrus sinensis peel extract and its antibacterial activity

Biosynthesis of silver nanoparticles (AgNPs) was achieved by a novel, simple green chemistry procedure using citrus sinensis peel extract as a reducing and a capping agent. The effect of temperature on the synthesis of silver nanoparticles was carried out at room temperature (25°C) and 60°C. The successful formation of silver nanoparticles has been confirmed by UV-vis, FTIR, XRD, EDAX, FESEM and TEM analysis and their antibacterial activity against Escherichia coli, Pseudomonas aeruginosa (gram-negative), and Staphylococcus aureus (gram-positive) has been studied. The results suggest that the synthesized AgNPs act as an effective antibacterial agent.     

Rapid green synthesis of gold nanoparticles using Rosa hybrida petal extract at room temperature

This study reports a green method for the synthesis of gold nanoparticles using the aqueous extract of rose petals. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Gold nanoparticles were characterized with different techniques such as UV-vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering and transmission electron microscopy. Transmission electron microscopy experiments showed that these nanoparticles are formed with various shapes. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary amine group (-NH2), carbonyl group, -OH groups and other stabilizing functional groups. X-ray diffraction pattern showed high purity and face centered cubic structure of gold nanoparticles. Dynamic light scattering technique was used for particle size measurement, and it was found to be about 10nm. The rate of the reaction was high and it was completed within 5 min.     

Heck couplings at room temperature in nanometer aqueous micelles

A nonionic amphiphile such as Triton X-100 or the vitamin E-based PTS, both of which form nanomicelles in water, promotes Heck cross-couplings of non-water-soluble partners at ambient temperatures. These are the first examples of Heck reactions conducted in water (as the only solvent) at room temperature.     

Uncatalysed Knoevenagel condensation in aqueous medium at room temperature

Knoevenagel condensation of various aromatic and heteroaromatic aldehydes with active methylene compounds like malononitrile, ethyl cyanoacetamide, ethyl cyanoacetate, barbituric acids, Meldrum’s acid, dimedone and pyrazolone proceeds smoothly with stirring in an aqueous medium. The reactions occur at room temperature giving excellent yields of the products. The work-up procedure is very simple and the products do not require further purification.     

Preparation and characterization of polyvinyl alcohol-capped CdSe nanoparticles at room temperature

Polyvinyl alcohol (PVA)-capped CdSe nanoparticles were successfully prepared by a one-step solution growth technique at room temperature and ambient pressure. X-ray diffraction, transmission electron microscopy, infrared spectra, and X-ray photoelectron spectra were used to characterize the final product. The as-prepared CdSe nanocrystals were well dispersed and uniform in shape and the diameter of the particles was confined within 8 nm. Ultraviolet-visible absorption spectra were used to study the confined growth process of PVA-capped CdSe nanoparticles. Photoluminescence measurement showed the near band-edge luminescence of the final product.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.     

Biosynthesis of silver, gold and bimetallic nanoparticles using the filamentous fungus Neurospora crassa

The role of nonionic vesicles on the rheological behavior of Pluronic F127 is investigated above the dilute regime and below the cloud point of the nonionic surfactant. F127 is a copolymer possessing sol-gel transition by heating attributed to a phase transition from micellar to cubic. The presence of surfactant vesicles is expected to enhance the compartmentalization of a variety of drugs, independently of their affinity to the solvent. Such entrapment would be suitable for controlled release of the drugs in different applications. We address here a mixed Pluronic-nonionic surfactant system with particular emphasis to the effects of the surfactant on the rheological properties of the Pluronics, and the correlation between these properties and drug release control. The results show that the rheological properties of the mixed system are mainly governed by the behavior of the polymer alone and that the mixed system can be useful to control the percutaneous permeation of a small drug, such as Diclofenac Sodium salt.     

Palladium nanoparticles stabilized by phosphine ligand for aqueous phase room temperature suzuki-Miyaura coupling

Water soluble phosphine ligand triphenylphosphine-3,3′,3″-trisulfonic acid trisodium salt (TPPTS) was used as the stabilizer as well as the activator to the palladium nanoparticles, which showed a high catalytic performance for aqueous phase Suzuki-Miyaura coupling reaction at room temperature.