The use of phospholipid modified column for the determination of lipophilic properties in high performance liquid chromatography

A new chromatographic stationary phase obtained by coating a reversed phase amide column with phosphatidylcholine based liposomes solution to yield a phospholipid modified column (PLM). The modification is achieved by the dynamic coating method which recycles the coating solution through the column in a closed loop for a period of 24 h. The chromatographic properties of the new column have changed significantly as compared to the original amide column due to the phospholipid coating. A good correlation was observed between n-octanol/water logP values and the logarithm of the retention factor obtained on the PLM column for a large number of solutes. In addition the PLM column was characterized using the linear solvation energy relationship (LSER). The values of the LSER system constants for the PLM column were calculated and were found to be very close to those of the n-octanol/water extraction system thus suggesting that the PLM column can be used for the estimation of n-octanol/water partition coefficient and serve as a possible alternative to the shake-flask method for lipophilicity determination. In addition, the results suggest that the PLM column can provide an alternative to other phospholipid-based column such as the IAM and the DPC columns.     

On-chip electrochromatography using sol-gel immobilized stationary phase with UV absorbance detection

A chromatography column on a chip was fabricated by immobilizing reversed-phase stationary phase particles (5 microm, C4) using sol-gel technology. Channels were fabricated in quartz using photolithography and wet etching. Localization of the stationary phase was achieved by immobilizing the stationary phase at the desired location in the separation channel prior to bonding of the cover plate. Cross channel design was employed for gated injection. An optical fiber setup was developed for carrying out on-chip UV absorbance detection. The effective optical path length was theoretically determined for the trapezoidal shaped channel and the result was shown to match closely with the experimentally determined value. The effect of applied voltage on velocity was evaluated using thiourea as an unretained marker. Separation performance of the stationary phase was demonstrated by separation of three peptides (Trp-Ala, Leu-Trp and Trp-Trp) under isocratic chromatographic conditions.     

Characterization of dynamically prepared phospholipid-modified reversed-phase columns.

We have modified a reversed-phase (RP8) column by passing through it an aqueous solution of phosphatidylcholine-based liposomes. The phospholipids from the liposomes adsorb onto the octyl chain of the stationary phase, thus altering the nature of the stationary phase and of the chromatographic interactions. The properties of the phospholipid-modified column were investigated using solutes belonging to several chemical classes. We found that the retention factors of negatively and positively charged solutes decreased as the amount of phospholipid in the column was increased. For the solutes studied here the extent of the decrease was smaller for the positive solutes. With neutral solutes, the retention factors of some (benzenediols) increased markedly while with others (ketones) the retention factors decreased. The selectivities between the various solutes on the phospholipid-modified column were different than on the original reversed-phase column. The retention behavior of the solutes can be explained in terms of (1) effective shielding of the hydrophobic part of the stationary phase by the polar head groups of the phospholipids and (2) hydrogen bond formation between the solutes and the carbonyl oxygens as well as the non-ester phosphate oxygens in the polar head groups of the phospholipids.     

Synthesis of an adsorbed reversed-phase packing material for the separation of proteins and peptides

We have described the preparation and chromatographic evaluation of an adsorbed hydrophobic stationary phase suitable for reversed-phase chromatography of proteins and peptides. The synthetic procedure involves three steps: the adsorption of a polyamine to the silica surface; crosslinking of the adsorbed polyamine layer with a bis-phenyl difunctional epoxide; and the benzoylation of the remaining accessible amino groups. Performance of this chromatographic material compared favorably with SynChropak RP-8 silica (SynChrom, Linden, IN, U.S.A.) and was stable to 40% formic acid. Good separations were obtained between the components of sample mixtures containing proteins or the cyanogen bromide fragments of sperm whale myoglobin. However, in both cases, the adsorbed hydrophobic stationary phase was less retentive. Furthermore, this medium exhibited slightly different selectivity. Whereas the heme which was present in the cyanogen bromide digest of myoglobin desorbed as the second peak from the RP-8 column, it eluted last from the adsorbed stationary phase. Comparable performance, acid stability and alternate selectivity suggest that this material is an interesting alternative to organosilane reversed-phase coatings.     

Immobilized artificial membrane liquid chromatography: proposed guidelines for technical optimization of retention measurements

The objectives of this study were to establish guidelines for the proper measurement of capacity factors (log k(IAMw) on immobilized artificial membrane (IAM) stationary phases. In this context, some aspects related to the extrapolation of log(kIAMw) values, the stability and properties of IAM.PC.DD2 stationary phases and the column-to-column variability are discussed. No significant difference was observed when using either acetonitrile or methanol for the linear extrapolation of log k(IAM) values. However, methanol seems more appropriate when working with ionized compounds. Plotting isocratic capacity factors against the percentage (v/v) of co-solvent instead of the mole fraction leads to more reliable log k(AMW) values. Furthermore, our results with a YMC ODS-AQ and an IAM.PC.DD2 HPLC column indicate that only small differences arise between extrapolated capacity factors when using the (w(w))pH or the (s(w))pH operational scale and correcting or not the ionic strength for dilution caused by the co-solvent. The use of the (s(w))pH scale is recommended when working with ionized compounds in order to avoid parabolic relationships during linear extrapolation. The pH-dependent retention of three ionizable drugs on an IAM.PC.DD2 phase showed that secondary interactions with the charged moieties of the chromatographic surface affect the retention of ionized compounds around physiological pH. Finally, it was shown that column ageing occurs also with IAM.PC.DD2 stationary phases and that it depends on the column as well as on the investigated analyte. The intra-batch variability for IAM.PC.DD2 phases was small, whereas a marked and solute-dependent batch-to-batch variability was apparent.     

Evaluation and application of liquid chromatographic columns coated with 'intelligent' ligands. II. Phospholipid column

The stationary phases of octadecylsilica (ODS) coated with phospholipid have been developed as a model of artificial lipid membranes for liquid chromatographic columns. An ODS column coated with phospholipid can be readily prepared by recycling a solution containing L-alpha-dipalmitoyl-phosphatidylcholine (DPPC) through an ODS column in a closed loop. DPPC becomes absorbed on the ODS surfaces by hydrophobic interaction between the acyl group of DPPC and the octadecyl group of the ODS surfaces. The DPPC column was usable when a mobile phase containing 30% (v/v) acetonitrile was delivered without detachment of the DPPC from the ODS surfaces. The retention behavior of ionic solutes on the DPPC column suggested that the retention was based on both ionic and electrostatic interactions between the solutes and the stationary phase. The retention factors on the DPPC column correlated well with the partition coefficients in liposome systems for alpha-adrenoceptor agonists and beta-blockers, indicating that the partition of solutes between the coated phase and buffer was similar to that in the liposome/water system. The DPPC column can be used in screening studies to predict the binding properties of drugs onto lipid membranes.     

Investigation of lipophilicity of anticancer-active thioquinoline derivatives

The lipophilicity of a series of anticancer propargylthioquinoline derivatives has been investigated using chromatographic and computational methods. The parameters of relative lipophilicity (R(MO) and logk0) of the tested compounds were determined experimentally both by reversed-phase thin layer (RP-TLC), and high-performance liquid chromatographic methods (RP-HPLC, LiChrospher RP18 column), with mixtures of acetonitrile and water as mobile phases. Their phospholipophilicity (logk(0IAM)) was determined using immobilized artificial membrane HPLC (IAM. PC DD2 Regis column). Mobile phase acetonitrile concentrations were in the ranges 50-90% (RP-TLC), 55-90% (RP-HPLC) and 35-60% (IAM-HPLC). The R(M), logk and logk(IAM) values of the compounds investigated were linearly dependent on acetonitrile concentration. The analysis led to the calculation of R(MO), logk0 and logk(0IAM) parameter values for each of the tested compounds. Their partition coefficients (logP) were also calculated with the Pallas and CAChe programs. The obtained results indicated that, among experimental methods, both RP-TLC and RP-HPLC gave similar results, and these methods enable the determination of lipophilicity of derivatives of thioquinolines. Using the IAM-HPLC technique a simple method of estimation of phospholipoplilicity was described. The CAChe program might better predict calculated lipophilicity logP values, and therefore is a useful tool for the early stage of design of new propargyl thioquinolines.     

Exploiting styrene-maleic acid copolymer grafting chromatographic stationary phase materials for separation of membrane lipids

High performance liquid chromatography-mass spectrometry is one of the most commonly used strategies for lipid analysis. The development of versatile chromatographic stationary phases to meet the increasing demands for separation of complex lipids is very important. Styrene-maleic acid(SMA) copolymer is an amphiphilic polymer, which has been proven to have the ability to solubilize lipid molecules of various structures. In this study, styrene-maleic anhydride copolymer coated silica was first pr...     

Characterization of a mixed-mode reversed-phase/cation-exchange stationary phase prepared by thermal immobilization of poly(dimethylsiloxane) onto the surface of silica

A novel stationary phase prepared by the thermal immobilization of poly(dimethylsiloxane) onto the surface of silica (PDMS–SiO₂) has been described, evaluated and compared with 229 commercially available RP-LC stationary phases using the Tanaka column classification protocol. The phase exhibited many unique chromatographic properties and, based on the phases in the database, was most similar to the fluoroalkylated phases (aside from the obvious lack of fluoro selectivity imposed by the C–F dipole). The phase exhibited classic reversed-phase behaviour in acid mobile phase conditions and mixed-mode reversed-phase/cation-exchange retention behaviour in neutral mobile phase conditions. The phase exhibited acceptable stability at both low and intermediate pH, conditions which should impart optimum chromatographic selectivity to the phase. Retention of basic analytes was shown to occur by a “three site model” as proposed by Neue. This new PDMS–SiO₂ stationary phase is extremely interesting in that the dominancy of its hydrophobic and ion-exchange interactions can be controlled by the influence of mobile phase pH, buffer type and concentration. The PDMS–SiO₂ stationary phase may provide a complementary tool to reversed-phase and HILIC stationary phases. The present results highlight the fact that the type of buffer, its concentration and pH can not only affect peak shape but also retention, selectivity and hence chromatographic resolution. Therefore, in method development and optimization strategies it is suggested that more emphasis should be given to the evaluation of these mobile phase operating parameters especially when basic solutes are involved.     

Void volume markers in reversed-phase and biomimetic liquid chromatography

A comparative investigation of 15 void volume marker candidates was carried out on two reversed-phase (RP), two immobilized artificial membrane (IAM) and two immobilized protein columns, namely Human Serum Albumin (HSA) and α₁-acid-glycoprotein (AGP), using different mobile phases in respect to pH and buffer composition. Pycnometric analysis of the 6 chromatographic columns was also employed for reasons of comparison. The results revealed the possible overestimation of stationary phase void volume if a general void volume marker is used under different chromatographic conditions. In particular, overestimation of the investigated columns’ void volumes was a common phenomenon when using acidic eluents or High Purity Water (HPW) as mobile phase. For this purpose, a classification of the recommended chemicals according to the column type or the pH of the mobile phase is suggested for the accurate determination of retention factors.     

Preparation and evaluation of rigid porous polyacrylamide-based strong cation-exchange monolithic columns for capillary electrochromatography

A CEC monolithic column with strong cation-exchange (SCX) stationary phase based on hydrophilic monomers was prepared by in situ polymerization of acrylamide, methylenebisacrylamide, and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a complete organic binary porogenic solvent consisting of DMSO and dodecanol. The sulfonic groups provided by the monomer AMPS on the surface of the stationary phase generate an EOF from anode to cathode, and serve as an SCX stationary phase at the same time. The monolithic stationary phase exhibited normal-phase chromatographic behavior for neutral analytes. For charged analytes, electrostatic interaction/repulsion with the monolith was observed. The strong SCX monolithic column has been successfully employed in the electrochromatographic separation of basic drugs, peptides, and alkaloids extracted from natural products.     

Carbon nanotube poroshell silica as a novel stationary phase for fast HPLC analysis of monoclonal antibodies

A new carbon nanotube porous silica poroshell stationary phase was developed. The chromatographic support was coated with ultrashort single-wall carbon nanotubes (SWCNTs) in a noncovalent way. It was demonstrated that the porous amino silica surface of the 300 NH₂ poroshell column stabilized with 1-methyl-2-pyrrolidinone efficiently and stably adsorbed SWCNTs onto the chromatographic support. It was shown that this novel poroshell carbon nanotube (CNT) stationary phase was very useful for the HPLC separation of a series of monoclonal antibodies (mAbs) in a short analysis time (<3 min). The high-performance liquid chromatography (HPLC) method was validated and was successfully tested for the fast quantitative and qualitative control of chemotherapeutic bags fabricated in a hospital pharmacy.     

Copper(II) complexes of lipophilic aminoglycoside derivatives for the amino acid enantiomeric separation by ligand-exchange liquid chromatography

In this paper, a new class of ligand-exchange chiral stationary phase (LE-CSP) based on the copper complexes of lipophilic aminoglycoside derivatives was reported. Different stationary phases were developed by coating reversed-phase liquid chromatography supports with three neamine derivatives carrying a lipophilic octadecyl chain at the 4', 5 and 6 positions, respectively. The enantioselective ability of these LE neamine-based CSPs was evaluated and the 4'-derivative coated column was found to be the most interesting one for the amino acid resolution. The effects of the variation of several chromatographic parameters on the enantioseparation were evaluated in order to identify the analysis optimal conditions.     

Chracterization of polyaniline using chromatographic studies

Summary The use of polyaniline as a chromatographic stationary phase has been examined. In the course of this work the column packing material was prepared by coating silica particles with polyaniline chloride. The aniline monomer was polymerised directly on the surface of the silica particles using a chemical method and was characterised using elemental analysis. A series of standard test compounds were employed for chromatographic characterization. The studies revealed information on the practical utility as well as the molecular interactions that took place on the stationary phase.     

High-performance liquid chromatographic stationary phases based on silica coated by in situ polymerization of a methacryloyl beta-cyclodextrin monomer: synthesis, characterization, and chromatographic evaluation

Porous silica beads have been coated with a 2-hydroxy-3-methacryloyloxypropyl beta-cyclodextrin polymer by in situ free-radical polymerization in water. This system has been developed for use as a stationary phase in high-performance liquid chromatography. In the conditions used, the coating efficiency is controlled by the initial concentration of the monomer. The polymer coating has been quantitated by thermogravimetric analysis. The stationary phases have also been characterized by means of the nitrogen adsorption/desorption method, energy dispersion X-ray analysis, and scanning electron microscopy to investigate the changes in the porosity, as well as in the surface properties generated by the coating process. Finally, the chromatographic evaluation has been made under normal- and reversed-phase elution conditions.     

Characterization of immobilized artificial membrane (IAM) and XTerra columns by means of chromatographic models

Immobilized artificial membranes (IAMs) prepared from phosphatidylcholine analogs are used as stationary phases in liquid chromatography systems to model drug partitioning between an aqueous phase (mobile phase) and a cell membrane (IAM column). Two different chromatographic models, which describe retention as a function of solute and column-mobile phase properties, have been applied to characterization of an IAM and two reversed phase C18 columns (Waters XTerra MSC18 and XTerra RP18) with acetonitrile-water mobile phases. The comparison of the results shows that the phosphatidylcholine group makes IAM column more polar than both XTerra columns, specially in terms of hydrogen-bond acceptor ability. XTerra RP18 is slightly more polar than XTerra MSC18 because of the presence of the embedded carbamate polar group.     

聚苯胺/石墨烯涂覆型阴离子交换固定相的制备及表征

该文以聚苯胺/石墨烯复合材料为涂覆材料,制备了一种涂覆型阴离子交换固定相。首先以苯胺和石墨烯为原料制备聚苯胺/石墨烯复合材料,并通过物理吸附涂覆在聚苯乙烯-二乙烯苯微球表面;然后以聚苯胺中的氮原子为反应位点,通过季铵化制备一系列具有不同交换容量的涂覆型阴离子交换固定相。通过扫描电镜(SEM)、傅里叶红外光谱(FT-IR)和元素分析(EA)对该涂覆型阴离子交换固定相进行表征,结果表明聚苯胺/石墨烯成功地涂覆在微球表面且发生了季铵化。通过分离常规阴离子和有机酸,对自制阴离子交换色谱柱的色谱性能进行评价。结果显示,8次季铵化的聚苯胺/石墨烯涂覆聚苯乙烯-二乙烯苯阴离子交换色谱柱对常规阴离子和有机酸呈现良好的分离效果。     

十二烷基键合氧化锆固定相的制备与性能评价

以自制5μm球形氧化锆为基质，制备了十二烷基键合氧化锆HPLC固定相，考察了正烷基取代苯、稠环芳烃、苯胺及吡啶衍生物、苯酚和硝基苯酚异构体等不同性质化合物在固定相上的保留行为，并与十二烷基键合硅胶固定相进行了比较。结果表明：中性和碱性化合物在固定相上主要为反相色谱保留机理；酸性化合物在固定相上以反相色谱保留机理为主，但是氧化锆表面的Lewis酸性中心对溶质也存在一定程度吸附作用，导致色谱峰拖尾。     

Development of a new C14 monolithic silica column containing embedded polar groups for pressurized capillary electrochromatography

Monolithic columns have been prepared with a novel bonded silica stationary phase, tetradecylamine bonded silica (TDAS), and used in pressurized capillary electrochromatography (pCEC). The monolithic silica column matrix was prepared by a sol-gel process and then chemically modified with the spacer (3-glycidoxypropyl)trimethoxysilane and tetradecylamine. The introduced embedded polar amine groups dominated the charge on the surface of the monolithic stationary phase and generated an EOF from cathode to anode under acidic conditions. The tetradecyl hydrophobic chains in TDAS provide chromatographic interactions. The chromatographic characteristics of the prepared monolithic column were studied. Some aromatic compounds including alkylbenzenes, aromatic hydrocarbons, phenols, and anilines were successfully separated on the TDAS monolithic column in pCEC mode. As expected, the TDAS monolithic stationary phases exhibit typical reversed-phase electrochromatographic behavior toward neutral solutes due to the introduced tetradecyl groups. Hydrophobic as well as electrophoretic migration processes within the monoliths were observed in the separation of basic anilines. Symmetrical peaks can be obtained for anilines because the embedded polar amine groups on the surface can effectively shield the adsorption of positively charged analytes onto the stationary phase.     

Multi-modal applicability of a reversed-phase/weak-anion exchange material in reversed-phase,anion-exchange,ion-exclusion,hydrophilic interaction and hydrophobic interaction chromatography modes

We recently introduced a mixed-mode reversed-phase/weak anion-exchange type separation material based on silica particles which consisted of a hydrophobic alkyl strand with polar embedded groups (thioether and amide functionalities) and a terminal weak anion-exchange-type quinuclidine moiety. This stationary phase was designed to separate molecules by lipophilicity and charge differences and was mainly devised for peptide separations with hydroorganic reversed-phase type elution conditions. Herein, we demonstrate the extraordinary flexibility of this RP/WAX phase, in particular for peptide separations, by illustrating its applicability in various chromatographic modes. The column packed with this material can, depending on the solute character and employed elution conditions, exploit attractive or repulsive electrostatic interactions, and/or hydrophobic or hydrophilic interactions as retention and selectivity increments. As a consequence, the column can be operated in a reversed-phase mode (neutral compounds), anion-exchange mode (acidic compounds), ion-exclusion chromatography mode (cationic solutes), hydrophilic interaction chromatography mode (polar compounds), and hydrophobic interaction chromatography mode (e.g., hydrophobic peptides). Mixed-modes of these chromatographic retention principles may be materialized as well. This allows an exceptionally flexible adjustment of retention and selectivity by tuning experimental conditions. The distinct separation mechanisms will be outlined by selected examples of peptide separations in the different modes.