Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

Rate constants for the reactions of OH radicals and Cl atoms with Di‐n‐Propyl ether and Di‐n‐Butyl ether and their deuterated analogs

Using relative rate methods, rate constants for the gas‐phase reactions of OH radicals and Cl atoms with di‐n‐propyl ether, di‐n‐propyl ether‐d₁₄, di‐n‐butyl ether and di‐n‐butyl ether‐d₁₈ have been measured at 296 ± 2 K and atmospheric pressure of air. The rate constants obtained (in cm³ molecule⁻¹ s⁻¹ units) were: OH radical reactions, di‐n‐propyl ether, (2.18 ± 0.17) × 10⁻¹¹; di‐n‐propyl ether‐d₁₄, (1.13 ± 0.06) × 10⁻¹¹; di‐n‐butyl ether, (3.30 ± 0.25) × 10⁻¹¹; and di‐n‐butyl ether‐d₁₈, (1.49 ± 0.12) × 10⁻¹¹; Cl atom reactions, di‐n‐propyl ether, (3.83 ± 0.05) × 10⁻¹⁰; di‐n‐propyl ether‐d₁₄, (2.84 ± 0.31) × 10⁻¹⁰; di‐n‐butyl ether, (5.15 ± 0.05) × 10⁻¹⁰; and di‐n‐butyl ether‐d₁₈, (4.03 ± 0.06) × 10⁻¹⁰. The rate constants for the di‐n‐propyl ether and di‐n‐butyl ether reactions are in agreement with literature data, and the deuterium isotope effects are consistent with H‐atom abstraction being the rate‐determining steps for both the OH radical and Cl atom reactions. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 425–431, 1999     

Synthesis and characterization of new poly(ether amide)s based on a new cardo monomer

A new cardo diamine monomer 3, 3‐bis‐[4‐{2′trifluoromethyl 4′‐(4″‐aminophenyl) phenoxy} phenyl]‐2‐phenyl‐2, 3‐dihydro‐isoindole‐1‐one ( 4 ) has been synthesized from potentially cheap phenolphthalein as the starting material. This diamine was used for the synthesis of a new poly(ether amide) and two co‐poly(ether amide)s using 4, 4′‐diaminodiphenyl ether (ODA) as co‐monomer by direct solution polycondensation with 5‐t‐butyl iso‐phthalic acid. These new polymers showed inherent viscosities of 0.48–0.62 dL g^?1. The resulting poly(ether amide) and co‐poly(ether amide)s were readily soluble in polar aprotic solvents like NMP, DMF, DMAc, DMSO, and pyridine. The polymers have been fully characterized by ¹H and ¹³C NMR, FTIR spectroscopy, and elemental analysis. These polymers showed glass transition temperatures in the range of 267–310°C. Thermogravimetric analysis indicated high thermal stability of these polymers at 5 and 10% weight loss temperature in air above 357°C and 419°C, respectively. The poly(ether amide) films cast from DMAc were flexible with tensile strength up to 91 MPa, elongations at break up to 11%, and modulus of elasticity up to 1.82 GPa. X‐ray diffraction measurements indicate the amorphous nature of the poly(ether amide)s. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of sulfonated poly(imidoaryl ether sulfone) membranes for polymer electrolyte membrane fuel cells

New sulfonated poly(imidoaryl ether sulfone) copolymers derived from sulfonated 4,4′‐dichlorodiphenyl sulfone, 4,4′‐dichlorodiphenyl sulfone, and imidoaryl biphenol were evaluated as polymer electrolyte membranes for direct methanol fuel cells. The sulfonated membranes were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, and proton nuclear magnetic resonance spectra. The state of water in the membranes was measured with differential scanning calorimetry, and the existence of free water and bound water was discussed in terms of the sulfonation level. The 10 wt % weight loss temperatures of these copolymers were above 470 °C, indicating excellent thermooxidative stability to meet the severe criteria of harsh fuel‐cell conditions. The proton conductivities of the membranes ranged from 3.8 × 10^?2 to 5 × 10^?2 S/cm at 90 °C, depending on the degree of sulfonation. The sulfonated membranes maintained the original proton conductivity even after a boiling water test, and this indicated the excellent hydrolytic stability of the membranes. The methanol permeabilities ranged from 1.65 × 10^?8 to 5.14 × 10^?8 cm²/s and were lower than those of other conventional sulfonated ionomer membranes, particularly commercial perfluorinated sulfonated ionomer (Nafion). The properties of proton and methanol transport were discussed with respect to the state of water in the membranes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5620–5631, 2005     

Synthesis and Properties of a Novel Cycloaliphatic Epoxide

The novel cycloaliphatic epoxide 3,4‐epoxycyclohexylmethyl‐2′,3′‐epoxycyclohexyl ether ( II ) containing an unsymmetrical epoxycyclohexyl moiety linked via an ether bond, and its precursor 3‐cyclohexene‐1‐methyl‐2′‐cyclohexene ether ( I ) were synthesized. Their structure was confirmed by means of elemental analysis, FT‐IR and ¹H NMR spectroscopy. Compared with commercial epoxide ERL‐4221, the newly synthesized epoxide II shows a higher epoxy value (0.85 eq/g) and lower viscosity (86 mpa·s/25°C). The cured product, based on epoxide II and curing agent hexahydro‐4‐methylphthalic anhydride (HMPA), showed higher glass transition temperature (162°C), higher storage modulus at the glass transition region (2.95 GPa), higher crosslinking density (1.60×10^–3 mol/cm³) and a lower coefficient of thermal expansion (6.22×10^–5/°C).     

Spectrophotometric determination of lithium ion with the chromogenic crown ether, 2″,4″-dinitro-6″-trifluoromethylphenyl-4′-aminobenzo-14-crown-4

A spectrophotometric method of determining alkali metal ions with a chromogenice crown ether reagent was found to be more selective and sensitive than an ion-pairing method based on the same size of crown ether cavity. It is shown that in the ion-pairing method, the sensitivity toward lithium ion was 5.685 × 10^?4 absorbance/mg l^?1, with sodium interfering at 300 mg l^?1. The chromogenic crown ether, 2″,4″-dinitro-6″-trifluoromeethylphenyl-4′-aminobenzo-14-crown-4, was much superior to benzo-14-crown-4. The sensitivity of the chromogenic crown ether was 1.69 × 10^?3 absorbance/mg l^?1. This represents a three-fold increase in sensitivity and less reagent is needed (2 × 10^?4 M for the chromogenic method versus 1.4 × 10^?3 M for ion-pairing). Interference from sodium decreased to 3000 mg l^?1. The reagent was used to determine lithium ion in treated blood serum samples in both a batch and flow injection method and results were compared with data obtained with atomic absorption; excellent agreement was obtained in all cases.     

Determination of lipoic acid, Trolox methyl ether and tocopherols in human plasma by liquid-chromatography and ion-trap tandem mass spectrometry

A method for the simultaneous determination of lipoic acid and/or Trolox methyl ether, along with α‐, γ‐ and δ‐tocopherol was developed using liquid chromatography–tandem mass spectrometry with negative electrospray ionization (HPLC‐ESI‐MS/MS) in an ion‐trap mass spectrometer. Detection and quantification were accomplished by a multiple reaction monitoring method, using specific transitions from precursor ion to product ion for each analyte. Chromatographic separation was achieved in a 12 min run using a C₁₈‐bonded phase and methanol–aqueous ammonium acetate elution gradient. Linear correlations of the chromatographic peak area (r.u. × s^?1) to the injected amount (ng) gave the slope values (r.u. × s^?1 × ng^?1) 2.34 × 10⁴ for α‐tocopherol, 5.05 × 10⁴ for γ‐tocopherol, 1.27 × 10⁵ for δ‐tocopherol, 8.86 × 10⁵ for lipoic acid and 1.23 × 10⁵ for Trolox methyl ether. The lower limit of quantification ranged between 0.02 and 1.22 ng for Trolox methyl ether and lipoic acid. MS³ experiments of γ‐ and δ‐tocopherol suggest ion‐radical reactions and dependence of the tocopherol fragmentation pattern on the phenolic ring methylation degree. The method is shown to be applicable to measurement of these metabolites in human serum after extraction. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and structural characterization of novel,fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties

The synthesis and structural characterization of a series of novel, fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties are described. The monomers, 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a – 2d ), were conveniently and efficiently synthesized from phenols and phthalic anhydride in two steps via 2‐(4′‐hydroxybenzoyl)benzoic acids, which were first obtained by the Friedel–Crafts reaction in good yields and with high stereoselectivity and were then converted into 2a – 2d by fusion with hydrazine. All the polymers were prepared by nucleophilic aromatic substitution (S_NAr) polycondensation between the compounds perfluorobiphenyl and 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a ‐ 2d ). The resulting fluorinated polymers were readily soluble in common organic solvents (e.g., CHCl₃, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, N‐methylpyrrolidone, etc.) at room temperature. Their weight‐average molecular weights and the polydispersities ranged from (7.96–18.25) × 10³ to 1.31–2.71, respectively. Their glass‐transition temperatures varied from 213 to 263 °C. They were all stable up to 390 °C both in air and in argon. The 5% weight‐loss temperatures of these polymers in air and argon ranged from 393–487 to 437–509 °C, respectively. Wide‐angle X‐ray diffraction studies indicated they were all amorphous and could be attributed to the presence of kink nonplanar moiety, phenyl phthalazinone along the polymer backbone. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 925–932, 2004     

Macrocycles. XXVIII. Cyclic poly(benzonitrile ether)s derived from bisphenol A

Bisphenol A was polycondensed with 2,6‐dichlorobenzonitrile, 2,6‐difluorobenzonitrile, 2,4‐difluorobenzonitrile, and 3,5‐difluorobenzonitrile in sulfolane. With 2,6‐and 2,4‐difluorobenzonitrile, quantitative conversions were achieved, and matrix‐assisted laser desorption/time‐of‐flight mass spectra revealed a nearly quantitative formation of cyclic oligoethers and polyethers. Furthermore, O,O′‐bistrimethylsilyl bisphenol A was polycondensed with the aforementioned dihalobenzonitriles in dry N‐methylpyrrolidone (promoted by potassium carbonate). Both the temperature and time were optimized. Only with 2,6‐difluorobenzonitrile were nearly quantitative conversions achieved, and this resulted in high molecular weights and high cycle contents. Size exclusion chromatography elution curves exhibited a tendency toward a bimodal character when larger fractions of cycles were present. Calibration with polystyrene standards indicated number‐average molecular weights of up to 10⁵ Da and weight‐average molecular weights of up to 2.3 × 10⁵ Da. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3838–3846, 2003     

Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Rate constants for the gas‐phase reactions of Cl atoms with a series of ethers

The laser photolysis–resonance fluorescence technique has been used to determine the absolute rate coefficient for the Cl atom reaction with a series of ethers, at room temperature (298 ± 2) K and in the pressure range 15–60 Torr. The rate coefficients obtained (in units of cm³ molecule⁻¹ s⁻¹) are dimethyl ether (1.3 ± 0.2) × 10⁻¹⁰, diethyl ether (2.5 ± 0.3) × 10⁻¹⁰, di‐n‐propyl ether (3.6 ± 0.4) × 10⁻¹⁰, di‐n‐butyl ether (4.5 ± 0.5) × 10⁻¹⁰, di‐isopropyl ether (1.6 ± 0.2) × 10⁻¹⁰, methyl tert‐butyl ether (1.4 ± 0.2) × 10⁻¹⁰, and ethyl tert‐butyl ether (1.5 ± 0.2) × 10⁻¹⁰. The results are discussed in terms of structure–reactivity relationship. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 105–110, 2000     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

Homo- and copoly(arylene ether ketones) with side hydroxyl groups

The polycondensation of 2-β-oxyethyl-3,3-bis(4-oxyphenyl)phthalimidine with 4,4′-difluorobenzophenone proceeding via the nucleophilic substitution of the activated halogen atom in aryl halide has been studied. Conditions ensuring formation of noncrosslinked high-molecular-mass homo- and copoly(arylene ether ketones) containing side alcoholic hydroxyl groups (4,4′-difluorobenzophenone: a mixture of bisphenols: K₂CO₃: Na₂CO₃ = 1: 1: 1: 0.05) have been established. The polymers have M _w = (20–88.7) × 10³ and show good solubility in organic solvents; their onset temperatures of softening are in the range 195–250°C. Polymer films cast from solution are characterized by a breaking strength of 78–109 MPa.     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Copoly(arylene ether nitrile) and copoly(arylene ether sulfone) ionomers with pendant sulfobenzoyl groups for proton conducting fuel cell membranes

Three series of fully aromatic ionomers with naphthalene moieties and pendant sulfobenzoyl side chains were prepared via K₂CO₃ mediated nucleophilic aromatic substitution reactions. The first series consisted of poly(arylene ether)s prepared by polycondensations of 2,6‐difluoro‐2′‐sulfobenzophenone (DFSBP) and 2,6‐dihydroxynaphthalene or 2,7‐dihydroxynaphthalene (2,7‐DHN). In the second series, copoly(arylene ether nitrile)s with different ion‐exchange capacities (IECs) were prepared by polycondensations of DFSBP, 2,6‐difluorobenzonitrile (DFBN), and 2,7‐DHN. In the third series, bis(4‐fluorophenyl)sulfone was used instead of DFBN to prepare copoly(arylene ether sulfone)s. Thus, all the ionomers had sulfonic acid units placed in stable positions close to the electron withdrawing ketone link of the side chains. Mechanically strong proton‐exchange membranes with IECs between 1.1 and 2.3 meq g⁻¹ were cast from dimethylsulfoxide solutions. High thermal stability was indicted by high degradation temperatures between 266 and 287 °C (1 °C min⁻¹ under air) and high glass transition temperatures between 245 and 306 °C, depending on the IEC. The copolymer membranes reached proton conductivities of 0.3 S cm⁻¹ under fully humidified conditions. At IECs above ∼1.6 meq g⁻¹, the copolymer membranes reached higher proton conductivities than Nafion^® in the range between −20 and 120 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photovoltaic performance enhancement using fluorene‐based copolymers containing pyrene units

A set of novel conjugated polyfluorene co‐ polymers, poly[(9,9′‐didecylfluorene‐2,7‐diyl)‐co‐(4,7′‐di‐2‐thienyl‐ 2′,1′,3′‐benzothiadiazole‐5,5‐diyl)‐co‐(pyrene‐1,6‐diyl)], are synthesized via Pd(II)‐mediated polymerization from 2,7‐bis(4′,4′,5′, 5′‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9′‐di‐n‐decylfluorene, 4, 7‐di(2‐bromothien‐5‐yl)‐2,1,3‐benzothiadiazole, and 1,6‐dibromopyrene with a variety of monomer molar ratios. The field‐effect carrier mobilities and optical, electrochemical, and photovoltaic properties of the copolymers are systematically investigated. The hole mobilities of the copolymers are found to be in the range 7.0 × 10^?5 ? 8.0 × 10^?4 cm² V^?1 s^?1 and the on/off ratios were 8 × 10³ ? 7 × 10⁴. Conventional polymer solar cells (PSCs) with the configuration ITO/PEDOT:PSS/polymer:PC₇₁BM/LiF/Al are fabricated. Under optimized conditions, the polymers display power conversion efficiencies (PCEs) for the PSCs in the range 1.99–3.37% under AM 1.5 illumination (100 mW cm^?2). Among the four copolymers, P2, containing a 2.5 mol % pyrene component incorporated into poly[9,9′‐didecylfluorene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PFDTBT) displays a PCE of 3.37% with a short circuit current of 9.15 mA cm^?2, an open circuit voltage of 0.86 V, and a fill factor of 0.43, under AM 1.5 illumination (100 mW cm^?2). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Kinetics and mechanism of hydrolysis of N‐(2′‐hydroxyphenyl)phthalamic acid (1) and N‐(2′‐methoxyphenyl)phthalamic Acid (2) in a highly alkaline medium

A kinetic study on hydrolysis of N‐(2′‐hydroxyphenyl)phthalamic acid ( 1 ), N‐(2′‐methoxyphenyl)phthalamic acid ( 2 ), and N‐(2′‐methoxyphenyl)benzamide ( 3 ) under a highly alkaline medium gives second‐order rate constants, k_OH, for the reactions of HO^? with 1, 2 , and 3 as (4.73 ± 0.36) × 10^?8 at 35°C, (2.42 ± 0.28) × 10^?6 and (5.94 ± 0.23) × 10^?5 M^?1 s^?1 at 65°C, respectively. Similar values of k_OH for 3 , N‐methylbenzanilide, N‐methylbenzamide, and N,N‐dimethylbenzamide despite the difference between pK_a values of aniline and ammonia of ～10 pK units are qualitatively explained. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 1–11, 2009     

Kinetic study of semifluorinated arylene vinylene ether polymers

Fluorinated arylene vinylene ether (FAVE) polymers were prepared from the base‐promoted addition of commercial 2,2‐bis(4‐hydroxyphenyl)hexafluoropropane (6F bisphenol A) to aryl trifluorovinyl ether (TFVE), 2,2′‐bis(4‐trifluorovinyloxybiphenyl)‐1,1,1,3,3,3‐hexafluoropropane. The step‐growth polymerization kinetics by using stoichiometric NaH and catalytic Cs₂CO₃ were investigated by monitoring the ¹⁹F NMR signals of the aryl TFVEs. The nth order kinetic model was used to determine rate constants over a series of programmed temperatures. Polymerization using stoichiometric NaH resulted in second‐order kinetics with an activation energy of 59 kJ/mol. This model kinetic study provided insight into the mechanistic pathways of the FAVE polymer system that has recently shown a lot of interest in many areas of materials science. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of copolymers of poly(ether sulfone ether ketone ketone) and poly(ether ketone diphenyl ketone ether ketone ketone) by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl(BPOBDP), was synthesized via a two‐step synthetic procedure. A series of novel poly(ether sulfone ether ketone ketone)/poly(ether ketone diphenyl ketone ether ketone ketone) copolymers were prepared by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of 4,4′‐diphenoxydiphenylsulfone (DPODPS) and 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers with 10–50 mol% DPODPS are semicrystalline and have remarkably increased T_gs over commercially available PEEK and PEKK. The copolymers with 40–50 mol% DPODPS had not only high T_gs of 170–172°C, but also moderate T_ms of 326–333°C, which are extremely suitable for melt processing. These copolymers have tensile strengths of 96.5–108.1 MPa, Young's moduli of 1.98–3.05 GPa, and elongations at break of 13–26% and exhibit excellent thermal stability and good resistance to acidity, alkali, and common organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

First Electrochemical Report for Simultaneous Determination of Norepinephrine,Tyrosine and Nicotine Using a Nanostructure Based Sensor

A carbon paste electrode was modified with ZnO nanorods and 3‐(4′‐amino‐3′‐hydroxy‐biphenyl‐4‐yl)‐acrylic acid (3,4′AAZCPE) to cause electrocatalysis of norepinephrine oxidation. It has been found that the oxidation of norepinephrine at the surface of modified electrode occurs at a potential of about 180 mV less positive than that of an unmodified carbon paste electrode. Square wave voltammetry (SWV) exhibits linear dynamic range from 1.0×10^?7 to 8.0×10^?5 M and a detection limit of 3.9×10^?8 M for norepinephrine. In addition, this modified electrode was used for simultaneous determination of norepinephrine, tyrosine and nicotine.