Supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts for ethylene polymerization

Silica-supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts show good activity in ethylene polymerization. For maximum productivity with the indenyl chromium catalyst, the silica must be dried, with higher dehydration temperatures giving a significant increase in polymerization activity. Less deactivation on thermal aging of the supported bis(indenyl)–chromium catalyst allows ethylene polymerization to proceed for many hours, which provides polyethylenes of low residual chromium content. In contrast to the behavior of supported chromocene catalysts, the indenyl–and fluorenyl–chromium catalysts require a higher hydrogen/ethylene ratio to achieve a specific polymer melt index. Nevertheless, highly saturated polyethylenes are produced with these new catalysts. This result indicates that chain transfer to hydrogen remains the major chain transfer reaction. Addition of cyclopentadiene to a supported indenyl–chromium catalyst provided a catalyst with a much higher transfer response to hydrogen. This result suggests that ligand exchange occurred, producing a supported chromocene catalyst. These overall results are consistent with an active-site model which comprises a supported divalent chromium center attached to an indenyl or fluorenyl ligand during the polymerization process. Polymerization is believed to occur by a coordinated anionic mechanism of the type previously discussed for a supported chromocene catalyst.     

Ethylene/1‐hexene copolymerization with tetramethyldisiloxane‐bridged bis(indenyl) metallocenes

Ethylene/1‐hexene copolymerizations with disiloxane‐bridged metallocenes, rac‐ and meso‐1,1,3,3‐tetramethyldisiloxanediyl‐bis(1‐indenyl)zirconium dichloride (rac‐ 1 , meso‐ 1 ) activated by modified methylaluminoxane were performed to investigate the influence of conformational dynamics on comonomer selectivity. Although ¹H NOESY (nuclear Overhauser and exchange spectroscopy) analysis indicated that the most stable conformation for the meso isomer in solution was that in which both indenes project over the metal coordination site, this isomer showed higher 1‐hexene selectivity in copolymerization (r_e = 140 ± 30, r_h = 0.024 ± 0.004) than the rac isomer with only one indene over the coordination site (r_e = 240 ± 20, r_h = 0.005 ± 0.001). The meso isomer showed high 1‐hexene selectivity, a high product of reactivity ratios (r_er_h = 3.3 ± 0.5) and produced copolymers that could be separated into fractions with different ethylene content suggesting that the active species exhibited multisite behavior and populated conformations with different comonomer selectivities during the copolymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3323–3331, 2004     

二茚基稀土胺化物催化丙烯腈聚合

用二茚基稀土胺化物Ind2LnN(i-Pr)2(Ln=Y,Yb)作为单组分催化剂催化丙烯腈聚合,研究了催化剂用量、单体浓度及聚合温度对标题化合物的催化活性和所得聚丙烯腈的分子量的影响。提高聚合发应温度可明显提高催化活性,当聚合温度达50℃,单体浓度为5.1mol     

The ansa‐zirconocene [bis(η5‐cyclopentadienyl)phenylphosphine]dichloridozirconium(IV)

In the title compound, [Zr(C₁₆H₁₃P)Cl₂], the geometry at the metal atom is distorted tetrahedral; the Cl—Zr—Cl angle is 101.490 (16)° and the cyclopentadienyl (Cp) centroids subtend an angle of 122.63 (3)° at the Zr atom. The P atom lies 0.474 (3) and 0.496 (3) Å out of the planes of the Cp rings. The C—P—C angle of 91.42 (7)° reflects the pincer effect of the two Cp rings. Three C—H...Cl, one C—H...P, one C—H...π and one Cl...P interaction link the molecules to form thick layers parallel to the bc plane.     

1,1‐Organoboration of bis(trimethylstannyl)ethyne with trimethylsilyl‐ and dimethylsilyl‐dialkylboryl‐substituted alkenes: organometallic‐substituted allenes

The reactions of bis(trimethylstannyl)ethyne, Me₃Sn–C?C–SnMe₃ ( 4 ), with trimethylsilyl‐ or dimethylsilyl‐dialkylboryl‐substituted alkenes 1 – 3 afford organometallic‐substituted allenes 5 , 6 and 8 , 9 in high yield. In the case of (E)‐2‐trimethylsilyl‐3‐diethylboryl‐2‐pentene ( 1) , a butadiene derivative 7 could be detected as an intermediate prior to rearrangement into the allene. All reactions were monitored by ²⁹Si and ¹¹⁹Sn NMR, and the products were characterized by an extensive NMR data set (¹H, ¹¹B, ¹³C, ²⁹Si, ¹¹⁹Sn NMR). Copyright © 2003 John Wiley & Sons, Ltd.     

Ferrocene‐substituted bis(ethynyl)anthracene compounds as anticancer agents

Three compounds ( 1 – 3 ) were synthesized, where ethynylferrocene is substituted at different positions of anthracene and anthraquinone, and their biological properties were investigated. Compounds 1 – 3 were characterized using NMR and mass spectroscopies and confirmed by their single‐crystal X‐ray structure. They were also characterized from electronic and photophysical properties. All three crystal structures were optimized using density functional theory calculations. The presence of C–H???π interactions in 1 – 3 leads to the formation of two‐ and three‐dimensional networks. The bioactivity of 1 – 3 was expressed by molecular docking with various cancerous proteins, which participated in progression of cancer. Compound 2 displayed the best interaction with cancer‐related Aurora A protein in terms of both binding energy (?10.61 kcal mol^?1) as well as inhibition constant (16.74 nM). The molecular docking result also coincides with cytotoxicity on cancer cell lines (A375, HeLa) and DNA/protein binding affinity.     

Poly(4‐vinylpyridine)‐supported cationic bis(cyclopentadienyl)zirconocene catalyst: Development of a new simple method to prepare polymer‐supported cationic zirconocene and its application to ethylene polymerization

Bis(cyclopentadienyl)zirconocene dimethyl (Cp₂ZrMe₂) combined with triphenylcarbenium tetrakis(pentafluorophenyl)borate ([Ph₃C][B(C₆F₅)₄]) was brought into contact with a suspension of 2% cross‐linked poly(4‐vinylpyridine) to give a new type of polymer‐supported cationic zirconocene catalyst. The resulting polymer‐supported catalyst system combined with Al(i‐Bu₃) showed markedly high activity for ethylene polymerization in even a non‐polar solvent like hexane at 25–60°C and [Al]/[Zr] molar ratio 40–200. By the analysis of Zr content of the hexane solution, it was found that no Zr was detected in the solution, i. e. no leaching of the cationic catalyst into the hexane medium. The catalytic activity was found to increase with an increase of polymerization temperature and showed the highest at [Al]/[Zr] = 100. The molecular weight, crystalline melting temperature, crystallinity, and bulk density of polyethylene formed were higher than those of the polymer obtained from the homogeneous system.     

Mono- and bisphenoxy derivatives of bis(indenyl)zirconium(IV)

A series of (C₉H₇)₂Zr(OAr)Cl and (C₉H₇)₂Zr(OAr)₂ complexes, where Ar = C₆H₅, p-ClC₆H₄, α-C₁₀H₇, or β-C₁₀H₇, have been synthesised by the reaction of bis(indenyl)zirconium(IV)-dichloride with an appropriate phenol in a 1:1 and 1:2 molar ratio in refluxing benzene in the presence of triethylamine. These complexes have been characterised by elemental analyses, conductance measurements and spectral (IR, ¹H NMR and electronic) studies.     

Mono- and bisphenoxy derivatives of bis(indenyl) titanium(IV)

A series of (C₉H₇)₂Ti(OAr)Cl and (C₉H₇)₂Ti(OAr)₂ complexes whereAr=C₆H₅,p-ClC₆H₄, α-C₁₀H₇ or β-C₁₀H₇, have been synthesised by the reaction of bis(indenyl) titanium(IV) dichloride with an appropriate phenol in a 1:1 and 1:2 molar ratio in refluxing benzene in the presence of triethylamine. The new derivatives have been characterized on the basis of their elemental analyses, conductance measurements and spectral (IR,¹H-NMR and electronic) studies.     

Nitro‐substituted iron(II) tridentate bis(imino)pyridine complexes as high‐temperature catalysts for the production of α‐olefins

A new series of nitro‐substituted bis(imino)pyridine ligands {2,6‐bis[1‐(2‐methyl‐4‐nitrophenylimino)ethyl]pyridine, 2,6‐bis[1‐(4‐nitrophenylimino)ethyl]pyridine, (1‐{6‐[1‐(4‐nitro‐phenylimino)‐ethyl]‐pyridin‐2‐yl}‐ethylidene)‐(2,4,6‐trimethyl‐phenyl)‐amine, and 2,6‐bis[1‐(2‐methyl‐3‐nitrophenylimino)ethyl]pyridine} and their corresponding Fe(II) complexes [{p‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐ Me? p‐NO₂}FeCl₂ ( 10 ), L₂FeCl₂ ( 11 ), {m‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? m‐NO₂}FeCl₂ ( 12 ), and {p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Mes}FeCl₂ ( 14 )] were synthesized. According to X‐ray analysis, there were shortenings of the axial Fe? N bond lengths (up to 0.014 Å) in para‐nitro‐substituted complex 10 and (up to 0.015 Å) in meta‐nitro‐substituted complex 12 versus the Fe(II) complex without nitro groups [{o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me}FeCl₂ ( 1 )]. Complexes 10 , 12 , and 14 afforded very active catalysts for the production of α‐olefins and were more temperature‐stable and had longer lifetimes than parent non‐nitro‐substituted Fe(II) complex 1 . The reaction between FeCl₂ and a sterically less hindered ligand [p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Ph? p‐NO₂] resulted in the formation of octahedral complex 11 . A para‐dialkylamino‐substituted bis(imino)pyridine ligand [p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂] and the corresponding Fe(II) complex [{p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂}FeCl₂ ( 16 )] were synthesized to evaluate the effect of enhanced electron donation of the ligand on the catalytic performance. According to X‐ray analysis, there was a shortening (up to 0.043 Å) of the axial Fe? N bond lengths in para‐diethylamino‐substituted complex 16 in comparison with parent Fe(II) complex 1 . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2615–2635, 2006     

Ligand-induced haptotropic rearrangements in bis(indenyl)zirconium sandwich complexes

Addition of principally sigma-donating ligands such as THF, chelating diethers, or 1,2-bis(dimethyl)phosphinoethane to eta(9),eta(5)-bis(indenyl)zirconium sandwich complexes, (eta(9)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))Zr (R = alkyl or silyl), induces haptotropic rearrangement to afford (eta(6)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))ZrL adducts. Examples where L = THF and DME have been characterized by X-ray diffraction and revealed significant buckling of the eta(6) benzo ring, consistent with reduction of the arene, and highlight the importance of the zirconium(IV) canonical form. For the THF-induced haptotropic rearrangements, the thermodynamic driving force for ring migration has been measured as a function of indenyl substituent and demonstrates silylated sandwiches favor THF coordination and the eta(6),eta(5) bonding motif over their alkylated counterparts. In the case of chelating diethers, measurement of the corresponding equilibrium constants establish more stable eta(6),eta(5) adducts with five- over four-membered chelates and with smaller oxygen and carbon backbone substituents. Kinetic studies on both THF and DME addition to (eta(9)-C(9)H(5)-1,3-(SiMe(3))(2))(eta(5)-C(9)H(5)-1,3-(SiMe(3))(2))Zr established a first-order dependence on the incoming ligand, consistent with a mechanism involving direct attack of the incoming nucleophile on the eta(9),eta(5) sandwich. These results further highlight the ability of the indenyl ligand to smoothly adjust hapticity to meet the electronic requirements of the metal center.     

Synthesis and characterization of a silyl substituted bis(indenyl) zirconium dichloride and comparison of its olefin polymerization behavior to a siloxy substituted analogue

The synthesis and characterization of rac‐[ethylenebis(1‐(tert‐butyldimethylsilyl)‐3‐indenyl)]zirconium dichloride ( 3 ) is reported. The silyl substituted 3 /MAO was compared to its siloxy substituted analogue ( 4 ) in ethylene homo‐ and in ethylene‐1‐hexene copolymerizations to elucidate the effect of the heteroatom on polymerization performance. The influence of monomer and cocatalyst concentration and the polymerization temperature was investigated. The oxygen between the indenyl ligand and the bulky tert‐butyldimethylsilyl group in the siloxy substituted 4 /MAO was found to have a positive influence on polymerization activity and copolymerization performance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 127–133, 2001     

Peroxide‐controlled degradation of poly(propylene): rheological behaviour and process modelling

The control of the molecular weight distribution of poly(propylene) resins by peroxide degradation is widely used in polymer industry. It allows to adjust the viscosity of these resins to the level required for processing applications. The purpose of this work was to characterise the influence of peroxide degradation on the rheological behaviour of an homopolymer PP and a block copolymer PP/PE, and to use these results to obtain a predictive model of the degradation in a twin‐screw extruder. By coupling a thermomechanical model of the twin‐screw extrusion process, a kinetic model of the considered reactions and the rheological behaviour, it was possible to calculate the changes in molecular weight along the extruder, during the peroxide‐controlled degradation.     

Zirconium complexes bearing bis(phenoxy‐imine) ligands with bulky o‐bis(aryl)methyl‐substituted aniline groups: synthesis,characterization and ethylene polymerization behavior

A series of bis(phenoxy‐imine) zirconium complexes bearing bulky o‐bis(aryl)methyl‐substituted aryl groups on the aniline moiety have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as a single chiral C₂‐symmetric isomer in the solution. X‐ray crystallographic analysis of the resulting biszwitterionic‐type adduct complex C1 · 2HCl reveals that the phenoxy‐imine groups function as a monodentate phenoxy ligand and the oxygen atoms are oriented trans to each other at the central metal atom. Using modified methylaluminoxane (MMAO) as co‐catalyst, C1 · 2HCl, C2–C6 exclusively produce linear aluminium‐terminated polyethylenes (Al‐PEs) with high activity (up to 16.89 × 10⁶ g PE (mol Zr h)^?1, suggesting that chain transfer to aluminum is the predominant termination mechanism. It is noteworthy that the introduction of an excessively bulky o‐bis(aryl)methyl substituent adjacent to the imine‐N produces low molecular‐weight Al‐PEs (M_v 1.6–10.1 × 10³) due to the enhanced rate of chain transfer to alkylaluminium groups during polymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylene and propylene polymerization with bis(indenyl)zirconium/Mao catalytic systems modified by sterically demanding alcohols

Ethylene and propylene polymerization using Ind₂ZrCl₂ and Ind₂Zr(CH₃)₂/MAO catalytic systems modified by the sterically demanding bridged alicyclic alcohols, adamantan‐1‐ol, adamantan‐2‐ol, 2‐methyladamantan‐2‐ol, and fenchyl alcohol, was investigated. Lower alcohols like isopropanol completely deactivate the system, whereas in the case of catalysts modified by these voluminous alcohols only a slight decrease in the catalytic activity proportional to alcohol/metallocene molar ratio was observed. The addition of the modifiers gives rise to polymers with higher molecular weights than the nonmodified systems, but no structural changes in the polyethylenes were observed. The addition of the sterically demanding alcohols to the reaction medium changes the regioregularity of polypropylenes, but does not significantly influence their stereoregularity, at 30 °C. Propylene–ethylene copolymers containing up to 8.6% of ethylene units derived from 1,3‐insertion and significant amount of rr‐centered pentads were obtained by single‐monomer polymerization of propylene with Ind₂ZrCl₂/MMAO/adamantan‐1‐ol, at 70 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4248–4259, 2005     

Structural and rheological properties of hydrophobically modified alkali‐soluble emulsion solutions

Scattering and rheological experiments were carried out on hydrophobically modified alkali‐soluble emulsion solutions at pH ～ 7.3 as a function of the polymer concentration. The light scattering experiments revealed the existence of a liquidlike order for concentrations below approximately 0.1 × 10^?2g cm^?3 corresponding approximately to the close packing of microgels particles. Above this concentration, the zero‐shear viscosity rose sharply, whereas the ordering disappeared progressively. The results are discussed within the framework of gelation models of associating polymers. Diffusing wave spectroscopy experiments provided estimates of the high‐frequency modulus. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1985–1994, 2002     

Hydrogen‐bonded layered structures in two bis(tert‐butyldimethylsilyloxy)‐substituted cyclic diol derivatives

2,6‐Bis(tert‐butyldimethylsilyloxy)‐9‐oxabicyclo[3.3.1]nonane‐3,7‐diol, C₂₀H₄₂O₅Si₂, (I), and 4,8‐bis(tert‐butyldimethylsilyloxy)‐2,6‐dioxatricyclo[3.3.1^3,7]decane‐1,3‐diol, C₂₀H₄₀O₆Si₂, (II), form layered structures that differ in the way the molecules are connected within each layer. The endocyclic O atom common to both structures plays an active role in the hydrogen‐bonding network, whereas the second oxygen bridge in (II) does not participate in any interaction. This work reports the first structural analysis of two bis(tert‐butyldimethylsilyloxy)‐substituted cyclic diol derivatives and provides insight into the influence of small changes in the molecular structure on the supramolecular aggregation. The unbalanced hydrogen‐bond acceptor/donor ratio, greater in (II) than in (I), does not result in the inclusion of water molecules in the structure.     

Vinyl polymerization of norbornene by bis(nitro‐substituted‐salicylaldiminate)nickel(II)/methylaluminoxane catalysts

The polymerization of norbornene has been investigated in the presence of different bis(salicylaldiminate)nickel(II) precursors activated by methylaluminoxane. These systems are highly active in affording nonstereoregular vinyl‐type polynorbornenes (PNBs) with high molecular weights. The productivity of the catalytic systems is strongly enhanced (up to 35,000 kg of PNB/mol of Ni × h) when electron‐withdrawing nitro groups are introduced on the phenol moiety. On the contrary, the presence of bulky alkyl groups on the N‐aryl moiety of the ligand does not substantially affect the activity or characteristics of the resulting PNBs. The catalytic performances are also markedly influenced by the reaction parameters, such as the nature of the solvent, the reaction time, and the monomer/Ni and Al/Ni molar ratios. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1514–1521, 2006