Effects of polydepsipeptide side‐chain groups on the temperature sensitivity of triblock copolymers composed of polydepsipeptides and poly(ethylene glycol)

To develop new types of biodegradable polymers possessing predictable responses to changes in temperature, ABA‐type and BAB‐type triblock copolymers composed of various polydepsipeptides (PDP) and poly(ethylene glycol) (PEG) (PDP‐PEG‐PDP and PEG‐PDP‐PEG) were synthesized. The specific focus of this study was on the effect of the different side‐chain groups of various amino acids on the temperature‐responsive behavior of the triblock copolymers. An ABA‐type triblock copolymer containing the less hydrophobic glycine (PGG‐PEG‐PGG) did not exhibit any temperature‐responsive behavior; however, ABA‐type triblock copolymers containing the hydrophobic α‐amino acids, L ‐leucine and L ‐phenylalanine (PGL‐PEG‐PGL or PGF‐PEG‐PGF), did exhibit temperature‐responsive behavior. The cloud point of PGF‐PEG‐PGF was 10 °C lower than that of PGL‐PEG‐PGL. It can be possible to control temperature‐sensitivity by changing not only PDP segment length but also kind of α‐amino acid in PDP segment. Moreover, BAB‐type triblock copolymer containing L ‐leucine (PEG‐PGL‐PEG) showed temperature‐responsive sol‐gel transition. Because polydepsipeptides are biodegradable polymers, the information obtained in this study is useful to design biodegradable injectable polymers having controllable temperature‐sensitivity for biomedical use.© 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3892–3903, 2009     

Microporous Molecular Materials from Dipeptides Containing Non‐proteinogenic Residues

Dipeptides with two hydrophobic side chains have proved to be an exceptional source of microporous organic materials, but since previous structures were limited to the incorporation of only proteinogenic residues, their full potential as adsorbents has remained unexplored. Single‐crystal XRD data for ten new compounds with non‐proteinogenic L ‐2‐aminobutanoic acid and/or L ‐2‐amino‐pentanoic acid are presented. The gas‐phase accessibility of their crystal pores, with cross‐sections of 2.3 to 5.1 Å, was monitored by CO₂ and CH₄ adsorption isotherms. Included CO₂ was also detected spectroscopically by 2D MAS NMR. An extensive conformational analysis reveals that the use of linear rather than branched side chains (such as L ‐valine and L ‐isoleucine) affords peptides with a greater degree of conformational freedom and yields more‐flexible channel surfaces that may easily adapt to a series of potential guest molecules.     

Oligoethylene‐end‐capped polylactides

Oligoethylene‐end‐capped polylactides were synthesized through the ring‐opening polymerization of L ‐lactide with alcohol‐terminated oligoethylenes as macroinitiators. The polymerization of L ‐lactide was carried out in bulk at 130 °C in the presence of stannous octoate and primary alcohols with four different molecular weights: 350, 425, 550, and 700 g/mol. The end‐capped copolymers that formed had a number‐average molecular weight of approximately 40,000 (weight‐average molecular weight/number‐average molecular weight = 1.7) according to gel permeation chromatography and were highly crystalline in comparison with the similarly formed homopolymer of L ‐lactide. The copolymer structure was characterized by Fourier transform infrared, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and differential scanning calorimetry analysis. This work focused on developing more crystallizable and hydrolytically stable polylactide derivatives that could potentially be used as compatibilizers in polylactide–polyolefin blends or as nucleating agents for poly(L ‐lactide) or other polyesters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5257–5266, 2005     

Target‐Specific Capture of Environmentally Relevant Gaseous Aldehydes and Carboxylic Acids with Functional Nanoparticles

Aldehyde and carboxylic acid volatile organic compounds (VOCs) present significant environmental concern due to their prevalence in the atmosphere. We developed biodegradable functional nanoparticles comprised of poly(d,l ‐lactic acid)‐poly(ethylene glycol)‐poly(ethyleneimine) (PDLLA‐PEG‐PEI) block co‐polymers that capture these VOCs by chemical reaction. Polymeric nanoparticles (NPs) preparation involved nanoprecipitation and surface functionalization with branched PEI. The PDLLA‐PEG‐PEI NPs were characterized by using TGA, IR, ¹H NMR, elemental analysis, and TEM. The materials feature 1°, 2°, and 3° amines on their surface, capable of capturing aldehydes and carboxylic acids from gaseous mixtures. Aldehydes were captured by a condensation reaction forming imines, whereas carboxylic acids were captured by acid/base reaction. These materials reacted selectively with target contaminants obviating off‐target binding when challenged by other VOCs with orthogonal reactivity. The NPs outperformed conventional activated carbon sorbents.     

Ring‐opening polymerization of benzylated 1,6‐anhydro‐β‐D‐lactose and specific biological activities of sulfated (1→6)‐α‐D‐lactopyranans

A new anhydro disaccharide monomer, 1,6‐anhydro‐2,3‐di‐o‐benzyl‐4‐o‐(2′,3′,4′,6′‐tetra‐o‐benzyl‐β‐D ‐galactopyranosyl)‐β‐D ‐glucopyranose (benzylated 1,6‐anhydro lactose (LSHBE)), was synthesized from D ‐lactose to investigate the polymerizability and biological activities of the resulting branched polysaccharides. The ring‐opening polymerization of LSHBE was carried out with phosphorus pentafluoride as a catalyst under high vacuum to give a stereoregular benzylated (1 → 6)‐α‐D ‐lactopyranan. The molecular weights of poly(LSHBE)s increased with an increase in the amount of CH₂Cl₂ solvent, and polymerization temperatures were affected in both molecular weights and yields of the polymers. The copolymerization of LSHBE with benzylated 1,6‐anhydro‐β‐D ‐glucopyranose (LGTBE) gave the corresponding copolysacchrides having different proportions of lactose and glucose units in good yields. After debenzylation to recover hydroxyl groups and then sulfation, sulfated homopoly(lactose)s and copoly(lactose and glucose)s were obtained. Sulfated homopoly(lactose)s had moderate anti‐HIV (EC₅₀ = 5.9 and 1.3 μg/mL) and blood anticoagulant activities (AA = 18 and 13 unit/mg), respectively. Sulfated copoly(lactose and glucose) having 15 mol % lactose units gave high anti‐HIV and blood anticoagulant activities of 0.3 μg/mL and 54 unit/mg, respectively. These biological results suggest that the distance between branched units on the main chain plays an important role in the anti‐HIV and blood anticoagulant activities. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 913–924, 2009     

Controlled synthesis of amphiphilic biodegradable polylactide‐grafted dextran copolymers

The whole controlled synthesis of novel amphiphilic polylactide (PLA)‐grafted dextran copolymers was achieved. The control of the architecture of such biodegradable and potentially biocompatible copolymers has required a three‐step synthesis based on the “grafting from” concept. The first step consisted of the partial silylation of the dextran hydroxyl groups. This protection step was followed by the ring‐opening polymerization of D ,L ‐lactide initiated from the remaining OH functions of the partially silylated polysaccharide. The third step involved the silylether group deprotection under very mild conditions. Based on previous studies, in which the control of the first step was achieved, this study is focused on the last two steps. Experimental conditions were investigated to ensure a controlled polymerization of D ,L ‐lactide, in terms of grafting efficiency, graft length, and transesterification limitation. After polymerization, the final step was studied in order to avoid degradation of both polysaccharide backbone and polyester grafts. The chemical stability of dextran backbone was checked throughout each step of the synthesis. PLA‐grafted dextrans and PLA‐grafted (silylated dextrans) were proved to adopt a core‐shell conformation in various solvents. Furthermore, preliminary experiments on the potential use of these amphiphilic grafted copolymers as liquid/liquid interface stabilizers were performed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2577–2588, 2004     

Synthesis of Branched Ribo‐Polysaccharides with Defined Structures by Ring‐Opening Polymerization of 1,4‐Anhydro Ribo‐Disaccharide Monomer

Ring‐opening polymerization of a new 1,4‐anhydro‐disaccharide monomer, 1,4‐anhydro‐2‐O‐benzyl‐3‐O‐(2,3,4,6‐tetra‐O‐benzyl‐β‐D ‐galactopyranosyl)‐α‐D ‐ribopyranose, which was prepared by the glycosylation of 1,4‐anhydro‐2‐O‐benzyl‐α‐D ‐ribopyranose with 2,3,4,6‐tetra‐O‐acetyl‐1‐O‐trichloroacetimidoyl‐α‐D ‐galactopyranose, was performed for the first time with boron trifluoride etherate to give stereoregular branched ribofuranans having high molecular weights of M̄_n = 43.0×10³ and positive specific rotation of [α]_D²⁵ = +25.1 deg·dm^–1· g^–1·cm³. The repalcement of the benzyl group by a hydroxyl group gave stereoregular 1,5‐α‐D ‐ribofuranans having a β‐D ‐galactopyranose branch in every repeating unit. The copolymerization of the ribo‐disaccharide monomer with 1,4‐anhydro‐2,3‐di‐O‐benzyl‐α‐D ‐ribopyranose was also carried out to afford stereoregular 1,5‐α‐D ‐ribofuranans having randomly distributed galactopyranose branches on the main chain.     

A new class of biodegradable hydrogels stereocomplexed by enantiomeric oligo(lactide) side chains of poly(HEMA‐g‐OLA)s

Two enantiomeric amphiphilic graft copolymers consisting of water soluble poly(2‐hydroxyethyl methacrylate) (HEMA) and biodegradable oligo(L ‐lactide) (OLLA) or oligo(D ‐lactide) (ODLA) were synthesized by free radical copolymerization. HEMA‐OL(D)LA macromonomers were synthesized by ring opening polymerization of L ‐ or D ‐lactide. Both HEMA‐OLA macromonomers and graft copolymers were characterized by NMR spectroscopy and gel permeation chromatography. Graft copolymers and their stereocomplexes were analyzed by wide angle X‐ray diffraction and differential scanning calorimetry (DSC). Due to the formation of stereocomplex crosslinks between poly(HEMA) main chains, amphiphilic, biodegradable hydrogels prepared by blending of two enantiomeric poly(HEMA‐g‐OLLA) and poly(HEMA‐g‐ODLA) degraded more slowly in phosphate buffered saline than individual optically pure poly‐(HEMA‐g‐OL(D)LA).     

RGD peptide grafted biodegradable amphiphilic triblock copolymer poly(glutamic acid)‐b‐poly(L‐lactide)‐b‐poly(glutamic acid): Synthesis and self‐assembly

A novel amphiphilic biodegradable triblock copolymer (PGL‐PLA‐PGL) with polylactide (PLA) as hydrophobic middle block and poly(glutamic acid) (PGL) as hydrophilic lateral blocks was successfully synthesized by ring‐opening polymerization (ROP) of L ‐lactide (LA) and N‐carboxy anhydride (NCA) consecutively and by subsequent catalytic hydrogenation. The results of cell experiment of PGL‐PLA‐PGL suggested that PGL could improve biocompatibility of polyester obviously. The copolymer could form micelles of spindly shape easily in aqueous solution. The pendant carboxyl groups of the triblock copolymer were further activated with N‐hydroxysuccinimide and combined with a cell‐adhesive peptide GRGDSY. Incorporation of the oligopeptide further enhanced the hydrophilicity and led to formation of spherical micelles. PGL‐PLA‐PGL showed better cell adhesion and spreading ability than pure PLA and the GRGDSY‐containing copolymer exhibited even further improvement in cell adhesion and spreading ability, indicating that the copolymer could find a promising application in drug delivery or tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3218–3230, 2007     

Structural optimization of highly branched thermally responsive polymers as a means of controlling transition temperature

Highly branched “smart” polymers have emerged as a unique class of polymers with wide‐ranging applications. Poly(N‐isopropylacrylamide) (pNIPAAm) is at the forefront of stimuli‐responsive polymers; however, few transition temperature‐modification methods of linear pNIPAAm have been explored in highly branched systems. In this study, the three primary techniques of transition temperature modification of linear pNIPAAm are investigated for their efficacy on highly branched polymers. Of these techniques, cosolvent‐mediated tacticity control demonstrates an effect opposite of that which is expected. Temperature transition control via end‐group modification shows a marked decrease in efficacy in highly branched systems, despite highly branched systems having more end groups per polymer. Copolymerization with hydrophilic comonomers exhibits varying changes in efficacy compared to linear analogs, lending insights into the specific effects on the structured water surrounding the copolymer. While copolymerization proved to be most versatile in changing the transition temperature, all of the techniques showed interesting secondary effects. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The Formation of Biodegradable Polymeric Micelles from Newly Synthesized Poly(aspartic acid)‐block‐Polylactide AB‐Type Diblock Copolymers

Summary: A poly(aspartic acid)‐block‐polylactide (PAsp‐block‐PLA) diblock copolymer was synthesized through the polymerization of β‐benzyl‐L ‐aspartate‐N‐carboxyanhydride [Asp(OBzl)‐NCA] with amino‐terminating polylactide (NH₂‐PLA) as a macroinitiator. The chain length of the PAsp segment could be easily controlled by changing the monomer/initiator ratio. Dynamic light scattering measurements of PAsp‐block‐PLA aqueous solutions revealed the formation of polymeric micelles. Changes in the micelles as a function of pH were investigated.

The structure and formation of micelles of the poly(aspartic acid)‐block‐polylactide (PAsp‐block‐PLA) diblock copolymers synthesized here.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers

The gel to sol transition of aqueous solutions of di‐ and triblock copolymers consisting of poly(ethylene oxide) and biodegradable polyesters was studied as a function of temperature. The molecular weight and the chemical composition of the biodegradable blocks, (poly(l ‐lactic acid), poly(dl ‐lactic acid), poly(dl ‐lactic acid‐co‐caprolactone), and poly(dl ‐lactic acid‐co‐glycolic acid)) were varied to investigate the effects of chain packing and relative hydrophobicity on the gel to sol transition. The block copolymers studied formed micelles at lower concentrations in water, while the concentrated solutions experienced a gel to sol transition as the temperature increased. Further increase in temperature resulted in the precipitation of polymers. With increasing molecular weight and chain packing tendency of hydrophobic biodegradable block, the gel to sol transition occurred at lower concentrations and the transition temperature ranged from 0°C to over 90°C in a relatively narrow concentration range. The results obtained in this study confirm the relationship between gelation properties and polymer structure, as well as provide more information for these polymers in drug delivery applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 751–760, 1999     

Ultra‐Tuning of the Rare‐Earth fcu‐MOF Aperture Size for Selective Molecular Exclusion of Branched Paraffins

Using isoreticular chemistry allows the design and construction of a new rare‐earth metal (RE) fcu ‐MOF with a suitable aperture size for practical steric adsorptive separations. The judicious choice of a relatively short organic building block, namely fumarate, to bridge the 12‐connected RE hexanuclear clusters has afforded the contraction of the well‐defined RE‐ fcu ‐MOF triangular window aperture, the sole access to the two interconnected octahedral and tetrahedral cages. The newly constructed RE (Y³⁺ and Tb³⁺) fcu ‐MOF analogues display unprecedented total exclusion of branched paraffins from normal paraffins. The resultant window aperture size of about 4.7 Å, regarded as a sorbate‐size cut‐off, enabled a complete sieving of branched paraffins from normal paraffins. The results are supported by collective single gas and mixed gas/vapor adsorption and calorimetric studies.     

Synthesis of β‐1,4‐Linked Galactan Side‐Chains of Rhamnogalacturonan I

The synthesis of linear‐ and (1→6)‐branched β‐(1→4)‐d ‐galactans, side‐chains of the pectic polysaccharide rhamnogalacturonan I is described. The strategy relies on iterative couplings of n‐pentenyl disaccharides followed by a late stage glycosylation of a common hexasaccharide core. Reaction with a covalent linker and immobilization on N‐hydroxysuccinimide (NHS)‐modified glass surfaces allows the generation of carbohydrate microarrays. The glycan arrays enable the study of protein–carbohydrate interactions in a high‐throughput fashion, demonstrated herein with binding studies of mAbs and a CBM.     

Carboxylate‐Assisted Iridium‐Catalyzed C−H Amination of Arenes with Biologically Relevant Alkyl Azides

An iridium‐catalyzed C?H amination of arenes with a wide substrate scope is reported. Benzamides with electron‐donating and ‐withdrawing groups and linear, branched, and cyclic alkyl azides are all applicable. Cesium carboxylate is crucial for both reactivity and regioselectivity of the reactions. Many biologically relevant molecules, such as amino acid, peptide, steroid, sugar, and thymidine derivatives can be introduced to arenes with high yields and 100 % chiral retention.     

Differences in electrophoretic behavior between linear and branched PEG‐conjugated proteins

The objective of this study was to characterize the differences in electrophoretic behavior between linear and branched PEG‐conjugated proteins. Human growth hormone and alpha‐lactalbumin modified by linear or branched PEGs with molecular weight of 10 kDa were analyzed by SEC, MALDI‐TOF MS, SDS‐PAGE, and microchip CGE (MCGE). Chromatographic and mass spectrometric differences between the linear and branched PEG‐proteins on SEC and MALDI‐TOF MS were small, but their electrophoretic behaviors on SDS‐PAGE and MCGE were significantly different. In particular, MCGE showed significant differences in the peak width and the migration times of linear and branched PEG‐proteins, in which the branched PEG‐proteins exhibited a narrower peak and longer migration time than the linear PEG‐proteins. This phenomenon may explain the longer circulation half‐life for the branched PEG‐proteins observed in previously reported in vivo studies. Consequently, this study indicates that MCGE may be a valuable tool for differentiating linear and branched PEG‐proteins.     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Surface segregation of highly branched polymer additives in linear hosts

Entropy‐driven segregation of various branched and hyperbranched polymeric additives in chemically similar linear polymer hosts is studied using self‐consistent (SCF) mean‐field lattice simulations. The simulations account for the effect of molecular architecture on local configurational entropy in the blends, but ignores the effect of architecture on local density and blend compressibility. Star, dendrimer, and comb‐like additives are all found to be enriched at the surface of chemically identical linear host polymers. The magnitude of their surface excess increases with increased number of chain ends and decreases with increased segmental crowding near the branch point. Provided the number of arms and molecular weight of the branched additives are maintained constant, we find that the simplest branched architecture, the symmetric star, exhibits the strongest preference for the surface of binary polymer blends. We show that a single variable, here termed the “entropic driving force density,” controls the relative surface affinities of branched additives possessing a wide range of architectures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1788–1801, 2008     

Effect of PLGA block molecular weight on gelling temperature of PLGA‐PEG‐PLGA thermoresponsive copolymers

Thermoresponsive, biodegradable polymeric hydrogel networks are used widely in medicinal applications. Poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) (PLGA‐PEG‐PLGA) triblock copolymers exhibit a sol–gel transition upon heating. The effect of PLGA block and PEG chain molecular weights (MWs) on the gelling temperature of polymer aqueous solution (20% w/w) is described. All polymer solutions convert into a hard gel within 2 °C of the gelling temperature. The release properties of the gels were displayed using paracetamol as a representative drug. A linear relation is described between the gelling temperature and PLGA block MW. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 35–39     

Stannous(II) trifluoromethane sulfonate: a versatile catalyst for the controlled ring‐opening polymerization of lactides: Formation of stereoregular surfaces from polylactide “brushes”

A general method for the controlled synthesis of polylactide in solution and from solid supports is presented. The evaluation of stannous(II) trifluoromethane sulfonate [Sn(OTf)₂] and scandium(III) trifluoromethane sulfonate [Sc(OTf)₃] as catalysts for the ring‐opening polymerization (ROP) of L ‐, D ‐, and L ,D ‐lactide is described as a route to polylactide using mild and highly selective conditions. These triflate catalysts must be used in conjunction with a nucleophilic compound such as an alcohol that is the actual initiating species via the active metal alkoxide species. Consistent with this process, ¹H NMR analysis revealed that the α‐chain‐end bears the ester from the initiating alcohol, and upon hydrolysis of the active metal alkoxide chain end, a ω‐hydroxyl chain end was clearly detected. Polymers of predictable molecular weights and narrow polydispersities were obtained in high yields in accordance with a controlled polymerization process. The addition of base either as a solvent or additive significantly enhanced the polymerization rate with minimal loss to the polymerization control. The ROP of lactide isomers from an initiator, HO(CH₂CH₂O)₃(CH₂)₁₁SH, self‐assembled onto a gold surface using Sn(OTf)₂ produced polylactide brushes under living conditions and provides the opportunity to prepare stereoregular or chiral surfaces by polymerization of enantiomerically pure monomers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3529–3538, 2001