High‐Yield Fabrication of PLGA Non‐Spherical Microarchitectures by Emulsion‐Solvent Evaporation Method

Recently, it has been recognized the shape of particles plays an essential role in the design of materials with unique properties. In this study, PLGA non‐spherical microarchitectures, rods and fibers, were fabricated successfully in high yield by single emulsion‐solvent evaporation method in the presence of sodium tripolyphosphate. The assay of PVA residue was carried out and the hydrogen bonds formation was verified as well. The presented data show that viscosity and coagulation agent have a synergistic effect on forming the rod‐ and fiber‐like microarchitectures in the shear response and the formation mechanisms were proposed accordingly.

     

聚酰胺酸贮存稳定性

在不同溶剂中合成了一系列均苯二酐（PMDA）、联苯四酸二酐（BPDA）、二苯硫醚二酐（TDPA）、三苯二醚二酐（HQDPA）型和二苯醚二酐（ODPA）型聚酰胺酸（PAA）,由PMDA和二氨基二苯甲烷（MDA）或3,3′－二甲基－4,4′－二氨基二苯甲烷（DMMDA）在N－甲基吡咯烷酮（NMP）中合成的PAA在室温下呈凝胶态,而其它PAA在室温下均为透明溶液,考察了贮存湿温度、凝胶态、添加分子筛等条件对PAA贮存稳定性的影响,发现PAA凝胶的贮存稳定性优于PAA溶液,在PAA溶液中加入4A分子筛时,有利于其它贮存期的延长。     

Rational Fabrication of Anti‐Freezing,Non‐Drying Tough Organohydrogels by One‐Pot Solvent Displacement

Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti‐freezing, non‐drying CPA‐based organohydrogels with long‐term stability by partially displacing water molecules within the pre‐fabricated hydrogels. CPA‐based Ca‐alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA‐based organohydrogels remain unfrozen and mechanically flexible even up to ?70 °C and are stable under ambient conditions or even vacuum.     

Rational Fabrication of Anti‐Freezing,Non‐Drying Tough Organohydrogels by One‐Pot Solvent Displacement

Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti‐freezing, non‐drying CPA‐based organohydrogels with long‐term stability by partially displacing water molecules within the pre‐fabricated hydrogels. CPA‐based Ca‐alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA‐based organohydrogels remain unfrozen and mechanically flexible even up to −70 °C and are stable under ambient conditions or even vacuum.     

原位红外光谱法研究电纺聚酰胺酸纳米纤维膜热亚胺化过程

以均苯二酐和二苯醚二胺为原料合成聚酰胺酸溶液,通过静电纺丝法制得聚酰胺酸纳米纤维膜.利用原位红外技术研究亚胺化进程,并以优化的条件制得聚酰亚胺纳米纤维膜.研究结果表明,当升温速率为2℃/min时,在350℃可实现100%亚胺化;升温速率过快,纳米纤维膜的亚胺化程度较低;采用快速-慢速相结合的升温方法,则可以有效地提高亚胺化效率.     

苯胺链段为侧基的聚酰胺酸的合成及性质

采用三元共聚法制备了苯胺齐聚物为侧链的接枝型聚酰胺酸. 通过红外光谱、核磁共振谱及高效凝胶渗透色谱等技术对聚合物结构进行了表征. 该材料亚胺化后具有十分优异的热稳定性. 紫外-可见光谱和电化学测试结果表明, 该聚合物具有独特的光谱性质和可逆的电化学活性. 聚酰胺酸/ITO电致变色电极具有颜色变化明显, 响应速度较快, 着色效率高等优点, 是一种综合性能较好的电致变色聚合物材料.     

硫醚双酐聚酰胺酸的合成及其热稳定性

合成了硫醚二酐和4-硝基-4'-[N,N-二(2-氨乙基)氨基]偶氮苯(二胺单体)及对应的硫醚聚酰胺酸,并对其结构进行表征.由于该发色团分子的一端有可以进一步聚合的氨基,它与硫醚酐所形成的聚酰胺酸在普通有机溶剂中具有良好的可溶性,NLO发色团和聚酰亚胺骨架的分解温度t_d分别为362℃和491℃,显现出了特殊的热稳定性.目前,这些聚合物在高敏感非线性光学材料方面显示着广泛的应用前景.     

Preparation of Micron‐Sized Monodisperse Poly(ionic liquid) Particles

Micron‐sized monodisperse poly(ionic liquid) (PIL) particles, poly([2‐(methacryloyloxy)ethyl]trimethylammonium bis(trifluoromethanesulfonyl)amide), were prepared by dispersion polymerization at 70 °C in methanol with poly(vinylpyrrolidone) as a stabilizer. The obtained particle size could be controlled by addition of ethanol to the methanol medium while maintaining narrow monodispersity. The PIL particles exhibit unique properties; they can be observed by scanning electron microscopy without platinum coating, which is generally used to avoid an electron charge. Moreover, the solubility of the PIL particles can be easily changed by changing the counter anion, similar to the process for ionic liquids.     

非液晶偶氮苯聚酰胺酸的合成与光响应研究

为了研究和更多了解此类化合物的性质, 本文将3,3′, 4,4′-联苯二酸酐、4,4′-二氨基偶氮苯和4,4′-二氨基二苯醚进行聚合反应, 制备了一系列不同偶氮含量的偶氮非液晶聚合物, 并对其性质进行了表征.     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

高度单分散聚乙烯基倍半硅氧烷球形纳米粒子的制备及性能

在水溶液中, 以乙烯基三乙氧基硅烷(VTES)为前驱体, 氨水(NH₃ · H₂O)为催化剂, 在表面活性剂十二烷基苯磺酸钠(SDBS)存在下, 通过溶胶-凝胶法成功合成了具有不同粒径、 高度单分散的聚乙烯基倍半硅氧烷(PVSQ)球形纳米粒子. 研究结果表明, 催化剂NH₃ · H₂O与表面活性剂SDBS的用量对PVSQ的粒径和粒径分布影响很大, 而前驱体VTES的用量对PVSQ的粒径无明显影响. 通过场发射扫描电子显微镜(FESEM)、 傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)及热重(TG)分析对产物的形貌、 粒径和粒径分布、 结构及热性能进行了表征.     

聚酰胺酸结构及其亚胺化的红外光谱分析

利用变温透射红外光谱方法,通过跟踪聚酰胺酸（PAA）的亚胺化过程,对由均苯四酸二酐和4,4′-二氨基二苯醚合成的聚酰胺酸及经过加热亚胺化后生成的聚酰亚胺(PI)的红外吸收光谱进行分析,对聚酰胺酸和聚酰亚胺的红外谱峰进行合理的归属,发现聚酰胺酸在亚胺化过程中有-COO-和-NH+2存在,-COO-中羰基的对称与反对称伸缩振动分别位于1607和1406 cm-1,NH+2的伸缩振动则有3200、3133、2938、2880、2820和2610 cm-1等多个精细谱带。 并根据对-COO-和-NH+2谱峰的归属,提出聚酰胺酸生成聚酰亚胺的机理为聚酰胺酸中COOH的H+转移到聚酰胺酸中的NH上,形成NH+2,然后脱水环化生成聚酰亚胺。     

采用流变学方法研究聚酰胺酸6FDA-TFDB溶液的降解行为

合成了一种聚酰胺酸6FDA-TFDB溶液,利用流变仪研究其在不同影响因素(如:温度、升温速率、溶剂含水量等)下的流变行为,发现聚酰胺酸溶液的降解在高温区和低温区存在不同的行为.通过Andrade公式获得不同条件下聚酰胺酸溶液的黏流活化能,并比较其差异,同时对溶剂水含量在不同温度区域下对聚酰胺酸降解速率的影响也进行了深入的分析,从而建立一种半定量比较不同条件下聚酰胺酸溶液降解速率的方法.     

Synthesis of Highly pH‐Responsive Glucose Poly(orthoester)

pH‐Responsive polymers have great potential in biomedical applications, including the selective delivery of preloaded drugs to tissues with low pH values. These polymers usually contain acid‐labile linkages such as esters and acetals/ketals. However, these linkages are only mildly pH‐responsive with relatively long half‐lives (t_1/2). Orthoester linkages are more acid‐labile, but current methods suffer from synthetic challenges and are limited to the availability of monomers. To address these limitations, a sugar poly(orthoester) was synthesized as a highly pH‐responsive polymer. The synthesis was achieved by using 2,3,4‐tri‐O‐acetyl‐α‐D ‐glucopyranosyl bromide as a difunctional AB monomer and tetra‐n‐butylammonium iodide (TBAI) as an effective promoter. Under optimal conditions, polymers with molecular weights of 6.9 kDa were synthesized in a polycondensation manner. The synthesized glucose poly(orthoester), wherein all sugar units were connected through orthoester linkages, was highly pH‐responsive with a half‐life of 0.9, 0.6, and 0.2 hours at pH 6, 5, and 4, respectively.     

Solid‐state amidization and imidization reactions in vapor‐deposited poly(amic acid)

The condensation polymerization of 4,4′‐oxydianiline with pyromellitic dianhydride for the formation of poly(amic acid) and the subsequent imidization for the formation of polyimides were investigated for films prepared with vapor‐deposition polymerization techniques. Fourier transform infrared spectroscopy, thermal analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry of films at different temperatures indicated that additional solid‐state polymerization occurred before imidization. The experiments revealed that, upon vapor deposition, poly(amic acid) oligomers formed that had a number‐average molecular weight of about 1500 Da. Between 100–130 °C, these chains underwent an additional condensation reaction and formed slightly higher molecular weight oligomers. Calorimetry measurements showed that this reaction was exothermic [enthalpy of reaction (ΔH) ～ ?30 J/g] and had an activation energy of about 120 kJ/mol. The experimental ΔH values were compared with results from ab initio molecular modeling calculations to estimate the number of amide groups formed. At higher temperatures (150–300 °C), the imidization of amide linkages occurred as an endothermic reaction (ΔH ～ +120 J/g) with an activation energy of about 130 kJ/mol. The solid‐state kinetics depended on the reaction conversion as well as the processing conditions used to deposit the films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5999–6010, 2004     

A Supramolecular Approach on Using Poly(fluorenylstyrene)‐block‐poly(2‐vinylpyridine):PCBM Composite Thin Films for Non‐Volatile Memory Device Applications

Supramolecular composite thin films of poly[4‐(9,9‐dihexylfloren‐2‐yl)styrene]‐block ‐poly(2‐vinylpyridine) (P(St‐Fl)‐b‐P2VP):[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) were prepared for write‐once‐read‐many times (WORM) non‐volatile memory devices. The optical absorption and photoluminescence results indicated the formation of charge transfer complexation between the P2VP block and PCBM, which led to the varied PCBM aggregated size and memory characteristics. The ITO/PCBM:(P(St‐Fl)‐b‐P2VP)/Al device exhibited the WORM characteristic with low threshold voltage (−1.6 to −3.2 V) and high ON/OFF ratio (10³ to 10⁵) by tuning the PCBM content. The switching behavior could be explained by the charge injection dominated thermionic emission in the OFF state and field‐induced charge transfer in the ON state. The present study provides a novel approach system for tuning polymer memory device characteristics through the supramolecular materials approach.

     

Fabrication of Poly(L‐lactide)‐block‐Poly(ethylene glycol)‐block‐Poly(L‐lactide) Triblock Copolymer Thin Films with Nanochannels: An AFM Study

This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm²) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.

     

PEG‐Modified Macroporous Poly(Glycidyl Methacrylate) and Poly(2‐Hydroxyethyl Methacrylate) Microspheres to Reduce Non‐Specific Protein Adsorption

To minimize non‐specific protein adsorption on macroporous poly(glycidyl methacrylate) and poly(2‐hydroxyethyl methacrylate) microspheres containing amino and/or carboxyl groups, the microspheres are coated with α,ω‐bis‐carboxy poly(ethylene glycol) and amino‐terminated poly(ethylene glycol‐co‐propylene glycol) or α‐methoxy‐ω‐amino poly(ethylene glycol). Adsorption of bovine serum albumin (BSA), γ‐globulin, ¹²⁵I‐BSA, pepsin, and chymotrypsin on neat and PEGylated microspheres is determined by UV–VIS spectroscopy of supernatants and eluates or by measurement of radioactivity in an ionization chamber. Neat and PEGylated microspheres adsorb 0.8–70% and 0.02–44% of protein, respectively.

     

Macroporous Oxide Platforms Templated by Non‐Close‐Packed Spherical Copolymer Aggregates

Exclusive organic templating of macroporous oxide films is reported by using non‐close and lose packing of spherical copolymer aggregates, in combination with facile control of condensation degree/density of inorganic oxide frameworks. Unique macroporous oxide films, mainly titania showing highly porous, crystalline, and versatile properties, can be fabricated with continuous design from unusual 3‐D net‐shape to tunable spherical macrostructures, which expands the preparation of other inorganic oxide films (silica, alumina, and zirconia) and possibly adapts the use of other assembled organic polymers. The macroporous structures are helpful for effective accommodation of bulky biomoleculeshigh and diffusivity of organic molecules (useful for photocatalysts). Unusual structural variation, expansion of spherical voids, is also observed, being useful for fine tuning of optical property.     

Synthesis and Characterization of Stereo Multiblock Poly(lactic acid)s with Different Block Lengths by Melt Polycondensation of Poly(L‐lactic acid)/Poly(D‐lactic acid) Blends

Stereo multiblock PLAs with different block lengths are synthesized by melt polycondensation of low‐molecular‐weight poly(L ‐lactic acid)/poly(D ‐lactic acid) blends with a wide variety of $\overline {M} _{{\rm w}} $ in the range of 1.1–5.2 × 10³ g · mol^–1. The average block length (ν_av) of the stereo multiblock PLAs increases with increasing $\overline {M} _{{\rm w}} $ of the blend and with the reaction temperature, whereas $\overline {M} _{{\rm w}} $ and PDI of the stereo multiblock PLAs increases with increasing $\overline {M} _{{\rm w}} $ of the blend, the reaction time, and the temperature. Stereo multiblock PLAs with ν_av > 7 are crystallizable to form stereocomplex crystallites, and the crystallinity and melting temperature of the stereo multiblock PLAs increases with increasing ν_av and $\overline {M} _{{\rm w}} $ of the stereo multiblock PLAs.