Localisation and quantification of potential binding sites for compatibilisers on soft‐ and hardwood in wood–plastic composite systems

Chemical force microscopy (CFM) was used to characterise the surface of pine and beefwood with atomic force microscopy (AFM) tips coated with different compatibilisers. With the resulting force images, potential binding sites for compatibilisers, used in wood–plastic composites (WPC) to enhance adhesion between two relatively incompatible phases, were localised and quantified. Tips were coated with two commercially available polymers namely ethylene vinyl alcohol (EVOH) and polyethylene‐grafted maleic anhydride (PE‐g‐MA). It could be observed that the interaction forces between the EVOH coated tip and the wood surface was highly species sensitive, whereas adhesive forces measured between the PE‐g‐MA coated tip and the wood surface were comparable for both wood species. The force maps show that wood species differ in the distribution of functional groups, and the force histograms show that the frequency distribution of the adhesive forces varied for the two wood species. The adhesive force maps clearly show a difference between wood/compatibiliser systems, and the differences can be related to the chemical composition of the wood species. The results confirm that not all compatibilisers are equally suitable for all wood species and these results were confirmed by mechanical tensile tests of WPC systems in a related study. Copyright © 2016 John Wiley & Sons, Ltd.     

Chemical force spectroscopy in heterogeneous systems: intermolecular interactions involving epoxy polymer,mixed monolayers,and polar solvents

We used chemical force microscopy (CFM) to study adhesive forces between surfaces of epoxy resin and self-assembled monolayers (SAMs) capable of hydrogen bonding to different extents. The influence of the liquid medium in which the experiments were carried out was also examined systematically. The molecular character of the tip, polymer, and liquid all influenced the adhesion. Complementary macroscopic contact angle measurements were used to assist in the quantitative interpretation of the CFM data. A direct correlation between surface free energy and adhesion forces was observed in mixed alcohol-water solvents. An increase in surface energy from 2 to 50 mJ/m(2) resulted in an increase in adhesion from 4-8 nN to 150-300 nN for tips with radii of 50-150 nm. The interfacial surface energy for identical nonpolar surface groups of SAMs was found not to exceed 2 mJ/m(2). An analysis of adhesion data suggests that the solvent was fully excluded from the zone of contact between functional groups on the tip and sample. With a nonpolar SAM, the force of adhesion increased monotonically in mixed solvents of higher water content; whereas, with a polar SAM (one having a hydrogen bonding component), higher water content led to decreased adhesion. The intermolecular force components theory was used for the interpretation of adhesion force measurements in polar solvents. Competition between hydrogen bonding within the solvent and hydrogen bonding of surface groups and the solvent was shown to provide the main contribution to adhesion forces. We demonstrate how the trends in the magnitude of the adhesion forces for chemically heterogeneous systems (solvents and surfaces) measured with CFM can be quantitatively rationalized using the surface tension components approach. For epoxy polymer, inelastic deformations also contributed heavily to measured adhesion forces.     

Chemical force titrations of antigen- and antibody-modified poly(methylmethacrylate)

Poly(methylmethacrylate) (PMMA) is a versatile polymer that displays desirable properties for development of cheap and disposable microfluidic devices for sensing biomolecular interactions. Atomic force microscopy (AFM) and chemical force titrations were used to determine the efficacy of surface modifications made to accommodate protein-substrate linkage. AFM images show the effects on surface morphology of carboxylated-, amine-, hCG antigen- and anti-hCG antibody-modified PMMA substrates. Confocal microscopy was used to determine the fluorescent intensity of labeled antibody species on the PMMA substrate, confirming the success of surface antigen/antibody immobilization. Surface pK(1/2) value for carboxylic acid and amine species grafted on PMMA were determined. When carboxylic acid or amine-terminated tips were titrated against PMMA samples terminated with the hCG antigen and anti-hCG antibody, peaks appeared in the force titration curve consistent with the pI range of the antigen or antibody species. Strong adhesive forces were present at pH values above 7.0 when the antigen was present on the PMMA substrate, and these were attributed to hydrophobic interactions between the antigen and the alkane "linker" chain attaching the amine or carboxylate group to the AFM tip. Such hydrophobic interactions were not observed with the carboxylic acid or amine/antibody combinations suggesting that the surface-linked antibody was more resistant to denaturation under higher pH. The results demonstrated the feasibility of using AFM approaches for interrogating protein grafting strategies in the fabrication of PMMA-based microsystems.     

Chemical Force Microscopy Study of Adhesion and Friction between Surfaces Functionalized with Self-Assembled Monolayers and Immersed in Solvents

Adhesive and frictional forces between surfaces modified with self-assembled monolayers (SAMs) and immersed in solvents were measured with chemical force microscopy as functions of surface functionality and solvent. Si/SiO2 substrates were modified with SAMs of alkylsiloxanes (SiCl3(CH2)n-X), and gold-coated AFM tips were modified with SAMs of alkylthiolates (HS-(CH2)n-X). SAMs of alkylsiloxanes terminated in a methyl or oxidized vinyl group; SAMs of alkanethiolates terminated in a methyl or carboxyl group. Adhesive and frictional forces were measured in hexadecane, ethanol, 1,2-propanediol, 1,3-propanediol, and water. The work of adhesion (W) was calculated with the Johnson-Kendall-Roberts theory of adhesive contact. The JKR values agreed well with values derived from the Fowkes-van Oss-Chaudhury-Good surface tension model and from contact angle results. Calculated values of W for all combinations of contacting surfaces and solvents spanned two orders of magnitude. W correlated with the surface tension of the solvent for hydrophobic/hydrophobic interactions; hydrophilic/hydrophilic and hydrophobic/hydrophilic interactions were more complex. Friction forces were fit to a modified form of Amonton's law. For any solvent, friction coefficients were largest for the hydrophilic/hydrophilic contacting surfaces. The friction coefficient for any contacting pair was largest in hexadecane. In polar solvents, friction coefficients scaled with solvent polarity only for hydrophobic/hydrophobic contacting pairs. Copyright 1999 Academic Press.     

Sequential electrochemical oxidation and site-selective growth of nanoparticles onto AFM probes

In this work, we reported an approach for the site-selective growth of nanoparticle onto the tip apex of an atomic force microscopy (AFM) probe. The silicon AFM probe was first coated with a self-assembled monolayer (SAM) of octadecyltrichlorosilane (OTS) through a chemical vapor deposition (CVD) method. Subsequently, COOH groups were selectively generated at the tip apex of silicon AFM probes by applying an appropriate bias voltage between the tip and a flat gold electrode. The transformation of methyl to carboxylic groups at the tip apex of the AFM probe was investigated through measuring the capillary force before and after electrochemical oxidation. To prepare the nanoparticle terminated AFM probe, the oxidized AFM probe was then immersed in an aqueous solution containing positive metal ions, for example, Ag+, to bind positive metal ions to the oxidized area (COOH terminated area), followed by chemical reduction with aqueous NaBH 4 and further development (if desired) to give a metal nanoparticle-modified AFM probe. The formation of a metal nanoparticle at the tip apex of the AFM probe was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA).     

Au nanolayers deposited on polyethyleneterephtalate and polytetrafluorethylene degraded by plasma discharge

Polyethyleneterephtalate (PET) and polytetrafluorethylene (PTFE) foils were modified by plasma discharge. The effect of plasma modification on polymer surface wettability and on properties of gold coatings were studied as a function of time from plasma exposure (aging time) and polymer substrate temperature. Thickness, sheet resistance, and surface topology of gold layers were studied. Aging of the plasma‐exposed samples is accompanied by increase in contact angle, which is explained by rearrangement of the polymer segments in the polymer surface monolayer, and a decrease in the concentration of polar groups. The aging also leads to a decline in surface roughness R_a measured by atomic force microscopy (AFM). Under deposition conditions, comparable thicknesses of deposited Au layers were prepared on pristine PET and plasma‐treated PET and PTFE samples. The thinnest Au layers were evaporated onto pristine PTFE. The sheet resistance decreases with increasing thickness of Au layer. Plasma treatment leads to an increase of PTFE surface roughness, which becomes even more pronounced after Au deposition. A higher roughness shows that the PET samples are deposited with the Au layer at temperatures above the glassy transition temperature T_g. Copyright © 2006 John Wiley & Sons, Ltd.     

Homopolymer and block copolymer brushes on gold by living anionic surface‐initiated polymerization in a polar solvent

Living anionic surface‐initiated polymerization on flat gold substrates has been conducted to create uniform homopolymer and diblock copolymer brushes. A 1,1‐diphenylethylene (DPE) self‐assembled monolayer was used as the immobilized precursor initiator. n‐BuLi was used to activate the DPE in tetrahydrofuran at –78 °C to initiate the polymerization of different monomers (styrene, isoprene, ethylene oxide, and methyl methacrylate). Poly(styrene) (PS) and poly(ethylene oxide) (PEO) in particular were first investigated as grafted homopolymers, followed by their copolymers, including poly(isoprene)‐b‐poly(methylmethacrylate) (PI‐b‐PMMA). A combined approach of spectroscopic (Fourier transform infrared spectroscopy, surface plasmon spectroscopy, ellipsometry, X‐ray photoelectron spectroscopy) and microscopic (atomic force microscopy) surface analysis was used to investigate the formation of the polymer brushes in polar solvent media. The chemical nature of the outermost layer of these brushes was studied by water contact angle measurements. The effect of the experimental conditions (solvent, temperature, initiator concentration) on the surface properties of the polymer brushes was also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 769–782, 2006     

Preparation and characterization of nonfouling polymer brushes on poly(ethylene terephthalate) film surfaces

In this study, a surface grafting of nonfouling poly(ethylene glycol) methyl ether acrylate (PEGMA) on poly(ethylene terephthalate) (PET) was carried out via surface-initiated atom-transfer radical polymerization (SI-ATRP) to improve hemocompatibility of polymer based biomaterials. To do this, the coupling agent with hydroxyl groups for the ATRP initiator was first anchored on the surface of PET films using photochemical method, and then these hydroxyl groups were esterified by bromoisobutyryl bromide, from which PET with various main chain lengths of PEGMA was prepared. The structures and properties of modified PET surfaces were investigated using water contact angle (WAC), ATR-FTIR, X-ray photoelectron spectroscopy (XPS) and Atomic force microscopy (AFM). The molecular weights of the free polymer from solution were determined by gel permeation chromatography (GPC). These results indicated that grafting of PEGMA on PET film is a simple way to change its surface properties. The protein adsorption resistance on the surfaces of PET was primarily evaluated by an enzyme-linked immunosorbent assay (ELISA). The result demonstrated that the protein adsorption could be well suppressed by poly(PEGMA) brush structure on the surface of PET. This work provides a new approach for polymers to enhance their biocompatibility.     

Quantitative determination of surface energy using atomic force microscopy: the case of hydrophobic/hydrophobic contact and hydrophilic/hydrophilic contact

Atomic force microscopy (AFM) has been used to determine the surface energy of chemically modified surfaces at a local scale. In order to achieve this aim, it was necessary to graft both the AFM tip and the substrate with the same chemical functional groups. Two different organothiols terminated either by hydrophilic or hydrophobic chemical functionalities were used. Grafting process classically reported shows that after UV/ozone treatment for 30 min, the tip is coated by thermal deposition with 4‐5‐nm‐thick titanium layer followed by a 30‐nm‐thick gold layer. Finally, the tip is grafted by organothiols. The thickness of the layer deposited on the tip is of the same order of magnitude as the tip radius. To avoid the use of Ti and to decrease the thickness of the gold layer, we have developed a new way of grafting by using organic molecules like (3‐mercaptopropyl)triethoxysilane (MPS) as a linkage agent. Then this way of grafting was checked. Finally, AFM force‐distance curves, between grafted tips and chemically modified surface, were carried out in contact mode. Calibration of the various parts of the apparatus and especially of the cantilever (spring constant and tip radius) is of major importance to reach quantitative data. Finally, by applying a suitable theory of contact, we were able to determine the surface energy of our system. Copyright © 2005 John Wiley & Sons, Ltd.     

Nucleation and growth of gas barrier aluminium oxide on surfaces of poly(ethylene terephthalate) and polypropylene: effects of the polymer surface properties

The nucleation and initial stages of growth of aluminium oxide deposited on two different polymer surfaces [poly(ethylene terephthalate), (PET) and amorphous polypropylene, (PP)] have been studied by atomic force microscopy (AFM). The permeation of water vapor and oxygen through the films has been measured. The initial stages of the growth of the oxide consisted of separated islands on the polymer surface. Further growth of oxide depends strongly on the surface morphology and chemical nature of the polymer surface. Growth on PET follows a layer‐by‐layer mechanism that maintains the native surface roughness of the polymer substrate. Growth on PP, however, follows an island mode, which leads to an increase in surface roughness. This may be due to a lack of chemical bonding between the polymer and the arriving metal–oxygen particles. The oxide layer on PET grows more densely than on PP, providing superior barrier to gas permeation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3151–3162, 2000     

Measurement of polyamide and polystyrene adhesion with coated-tip atomic force microscopy

This work presents atomic force microscopy (AFM) measurements of adhesion forces between polyamides, polystyrene and AFM tips coated with the same materials. The polymers employed were polyamide 6 (PA6), PA66, PA12 and polystyrene (PS). All adhesion forces between the various unmodified or modified AFM tips and the polymer surfaces were in the range -1.5 to -8 nN. The weakest force was observed for an unmodified AFM tip with a PS surface and the strongest was between a PS-coated tip and PS surface. The results point to both the benefits and drawbacks of coated-tip AFM force-distance measurements. Adhesion forces between the two most dissimilar (PA6-PS and PA66-PS) materials were significantly asymmetric, e.g., the forces were different depending on the relative placement of each polymer on the AFM tip or substrate. Materials with similar chemistry and intermolecular interactions yielded forces in close agreement regardless of placement on tip or substrate. Using experimental forces, we calculated the contact radii via four models: Derjaguin, Muller, and Toporov; Johnson, Kendall, and Roberts; parametric tip-force-distance relation; and a square pyramid-flat surface (SPFS) model developed herein. The SPFS model gave the most reasonable contact tip radius estimate. Hamaker constants calculated from the SPFS model using this radius agreed in both magnitude and trends with experiment and Lifshitz theory.     

Adhesion forces in liquid media: effect of surface topography and wettability

This work was motivated by the unexpected values of adhesion forces measured between an atomic force microscopy tip and the hydrophobic surface of ultra-high-molecular-weight polyethylene. Two types of samples with different roughness but similar wettability were tested. Adhesion forces of similar magnitude were obtained in air and in polar liquids (water and Hank's Balanced Salt Solution, a saline solution) with the rougher sample. In contrast, the adhesion forces measured on the smoother sample in air were much higher than those measured in water or in the aqueous solution. Those experimental results suggested the presence of nanobubbles at the interface between the rough sample and the polar liquids. The existence of the nanobubbles was further confirmed by the images of the interface obtained in noncontact tapping mode. The adhesion forces measured in a nonpolar liquid (hexadecane) were small and of the same order of magnitude for both samples and their values were in good agreement with the predictions of the London-Hamaker approach for the van der Waals interactions. Finally, we correlate the appearance of nanobubbles with surface topography. The conclusion of this work is that adhesion forces measured in aqueous media may be strongly affected by the presence of nanobubbles if the surface presents topographical accidents.     

Real-time monitoring of polymer swelling on the nanometer scale by atomic force microscopy

The swelling of a polymer surface has been monitored in real time on the nanometer scale by atomic force microscopy (AFM). After modification by oxygen plasma treatment, poly(p-phenylene terephthalamide) (PPTA) displays a characteristic nanostructured surface morphology consisting of high-lying features alternating with topographically depressed areas. Selective swelling of the least cross-linked, depressed areas after the adsorption of ambient water or water from saturated humid atmospheres was observed by tapping mode AFM operated in the attractive interaction regime. The swollen areas could be distinguished from the nonswollen ones by local variations in the sample indentation made by the AFM tip when imaging in the tapping mode repulsive interaction regime. Monitoring the swelling of the plasma-treated polymer surface provided a means to reveal the nanometer-scale heterogeneity that this type of treatment creates on the polymer surface, which is something that would not be possible otherwise. Measurement of AFM tip-sample adhesion forces evidenced rapid water adsorption onto the oxygen plasma-treated surface, supporting the idea of water-induced swelling. This high hydrophilicity was interpreted as arising from the incorporation of polar oxygen functionalities, as demonstrated by X-ray photoelectron spectroscopy (XPS).     

Interfacial friction of thin PDMS network films

This study focuses on developing dry, surface‐tethered polymeric lubricant coatings capable of significantly decreasing friction and wear of nano‐ and micrometer scale machines. Vinyl‐terminated polydimethylsiloxane chains are spin‐coated with a crosslinking agent and platinum catalyst onto silicon wafers functionalized with a self‐assembling monolayer containing reactive vinyl groups. Lateral force microscopy (LFM) measurements employing a bead probe are used to quantify the coefficient of friction (COF) and adhesion characteristics of the PDMS‐SAM surface tethered networks. The combined polymer network and SAM layer manifest extremely low friction coefficients, μ = 4 × 10^?3, which is nearly one order of magnitude lower than the friction coefficient of the bare silicon substrate. The lowest friction forces are measured using silicon substrates covered with nanometer thick, peroxide crosslinked PDMS networks; though poorly crosslinked, these networks display COFs as much as ten‐times lower than a solitary SAM coating layer. Micrometer thick end‐linked optimal networks also manifest attractive interfacial friction properties, with COFs approximately three times larger than the thinner, imperfect networks. These observations are discussed in terms of the structure of the polymer networks and the role of adhesion forces on interfacial friction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1773–1787, 2008     

Adsorption and adhesion studies of PdSn‐nanoparticles on protonated amine and carboxylic acid‐terminated surfaces

Electroless plating of acrylonitrile‐butadiene‐styrene‐terpolymers (ABS‐plastics) is used for decorative applications and relies on the immobilization of catalytic palladium‐tin nanoparticles. We used chemical force microscopy to measure the adhesion force of palladium‐tin nanoparticles on a patterned amine and carboxyl‐terminated surface prepared by micro‐contact printing. The kinetics of the adsorption process and the population density of the nanoparticles on amine and carboxyl‐terminated surfaces were monitored by quartz crystal microbalance with dissipation analysis. The surface chemistry was investigated by means of polarization‐modulated infrared reflection absorption spectroscopy and X‐ray photoelectron spectroscopy. Enhanced adhesion and population density of PdSn nanoparticles on protonated amine‐terminated surfaces compared with carboxyl‐terminated surfaces is observed. Copyright © 2016 John Wiley & Sons, Ltd.     

Starch nanocrystals with large chain surface modifications

Nanoscale monocrystalline starch particles were successfully modified using stearic acid chloride and poly(ethylene glycol) methyl ether. Surface modification was confirmed using FTIR, XPS spectroscopy, and contact angle measurements. X-ray diffraction and DSC analysis confirmed that there was no alteration of the starch crystalline structure due to the surface modification. The grafts at the starch surface were also found to crystallize on the surface. TEM showed the individualization of nanoparticles as a result of the reduction of polar and hydrogen bonding forces. These results show our ability to modify the starch nanocrystal surface with plasticizing chains. Modified nanoparticles can find applications as compatibilized polymer additives, surface-active particles, and co-continuous nanocomposite precursors.     

Fibre‐forming blends of polypropylene and polyethylene terephthalate

Bicomponent fibres represent of the new ways for the preparation of synthetic fibres with more variable properties. The polypropylene (PP)‐poly(ethylene terephthalate) (PET) fibre‐forming blend is very interesting because of the improvement of dyeability from bath and some mechanical properties of PP fibres. The new polymer additives containing ester groups which can be added as masterbatches during melting and extrusion processes have been developed in the last years. It has been found that rheological properties of the basic polymer (PP) and polymer additives have a significant role in the blend formation and in spinning. In this work, the influence of some non‐reactive low‐molecular compounds on the processing of fibre‐forming PP‐PET blends and on the properties of blend fibres are presented.     

Prospects for resolving chemical structure by atomic force microscopy: a first-principles study

In a recent paper, the chemical structure of a molecule was resolved by means of atomic force microscopy (AFM): using a metal tip terminated in a CO molecule, the authors could image the internal bonding arrangement of a pentacene molecule with remarkable spatial resolution (notably better than with other tip terminations), as verified by their first-principles calculations. Here we further explore with first-principles calculations the mechanisms, applicability, and capabilities of this approach for a wider range of situations, by varying the imaged molecule and the tip beyond the experimental cases. In our simulations, a high atomic resolution is found to be dominated by the electronic structure of the last two atoms on the tip apex which are set perpendicularly to the sample molecule. For example, tips terminated in CH(4) or pentacene itself (both having a C-H apex) yield similar images, while tips terminated in O(2) or CO give quite different images. While using a CO-terminated tip successfully resolves the chemical structure of pentacene and of other extended planar networks based on C(6) rings, this tip fails to resolve the structures of benzene (with its single C(6) ring) or nonplanar C(6) networks, such as C(60) or small-diameter carbon nanotubes. Defects (such as N substitution for a C-H group) were also found to significantly influence the image resolution. Our findings indicate that further application of this approach requires, for each sample, careful selection of a suitable "imaging" molecule as tip termination.     

Chemical imaging of the surface of self-assembled polystyrene-b-poly(methyl methacrylate) diblock copolymer films using apertureless near-field IR microscopy

The nanoscale chemical composition variations of the surfaces of thin films of polystyrene- b-poly(methyl methacrylate) (PS- b-PMMA) diblock copolymers are investigated using apertureless near-field IR microscopy. The scattering of the incident infrared beam from a modulated atomic force microscopy (AFM) tip is probed using homodyne detection and demodulation at the tip oscillation frequency. An increase in the IR attenuation is observed in the PMMA-rich domains with a wavenumber dependence that is consistent with the bulk absorption spectrum. The results indicate that even though a small topography-induced artifact can be observed in the near-field images, the chemical signature of the sample is detected clearly.     

Functionalization of multiwalled carbon nanotube via surface reversible addition fragmentation chain transfer polymerization and as lubricant additives

Polymer‐grafted multiwalled carbon nanotube (MWCNT) hybrid composite which possess a hard backbone of MWCNT and a soft shell of brush‐like polystyrene (PSt) were synthesized. The reversible addition fragmentation chain transfer (RAFT) agents were successfully immobilized onto the surface of MWCNT first, and PSt chains were subsequently grafted from sidewall of MWCNT via RAFT polymerization. Chemical structure of resulting product and the quantities of grafted polymer were determined by Fourier transform infrared, thermal gravimetric analysis, nuclear magnetic resonance, and X‐ray photoelectron spectra. Transmission electron microscopy and field emission scanning electron microscopy images clearly indicate that the nanotubes were coated with a polymer layer. Furthermore, the functionalized MWCNT as additives was added to base lubricant and the tribological property of resultant MWCNT lubricant was investigated with four‐ball machines. The results indicate that the functionalization led to an improvement in the dispersion of MWCNT and as additives it amended the tribological property of base lubricant. The mechanism of the significant improvements on the tribological properties of the functionalized MWCNT as additives was discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3014–3023, 2008