Polymer blends filled with carbon black: structure and electrical properties

Morphology and electrical conductivity of polymer blends based on polypropylene, polyethylene, polyoxymethylene, polyamide 12, co‐polymer ABS filled with carbon black (CB) were studied. When filler is introduced in polymer blend, three cases of filler spatial distribution can be obtained. CB can be distributed randomly within polymer matrix, can be situated in one of the polymer components or can be localized on the boundary of the polymer components. The existence of different cases of filled blends structure is defined by following reasons: thermodynamic factors (relationship between interface surface tensions of polymer‐filler γ_pf and polymer‐polymer surface tension γ_pp); kinetic factors (relationship between viscosities of polymer components); processing factors (methods of the filler introduction in the complex polymer matrix, which can enhance or depress the influence of thermodynamic and kinetic factors).     

Polymer blends

Small angle neutron scattering may be used to provide information on the thermodynamic basis of polymer-polymer miscibility via the temperature and concentration dependences of the observed interaction parameters. The kinetics of the phase separation process may also be followed and this in turn gives further information about the blend compatibility as well as providing tests of current theories of spinodal decomposition in binary mixtures.     

Polymer blends: From molecular structure through morphology to controlled bulk properties

It is shown how the morphology and the bulk physico-mechanical properties of polymer blends and alloys may be tailored, by using proper physical and processing conditions for homogeneous systems, and molecular engineering of the interfaces for heterophase ones. That approach, which has been substantiated by a physical study of the miscibility situations at molecular level, has been applied successfully to commodity and engineering polymer-polymer blends, but also to polymer-filler and polymer-liquid heterophase systems.     

Polymer blends—V: The effects of solid phase dispersants on the properties of ternary incompatible blends

The effects of two solid phase dispersants have been examined in a ternary blend of polyethylene, polypropylene and polystyrene. A styrene-butadiene block copolymer (SBS) is particularly effective in improving the balance of mechanical performance of the polyblend but it markedly sensitises the blend to thermal and photo-oxidation. An ethylene-propylene-diene terpolymer (EPDM) is rather less effective but is also not so powerful a photo-activator.     

Aminoalkylferrocenyldichlorophosphanes: facile synthesis of versatile chiral starting materials

A series of racemic and optically pure aminoalkylferrocenyldichlorophosphanes has been prepared by reaction of phosphorus trichloride with the corresponding lithiated aminoalkylferrocene precursors. Crystal structures of racemic 1-dichlorophosphanyl-2-N,N-dimethylaminomethylferrocene, racemic 1-dichlorophosphanyl-2-N,N-dimethylaminomethyl-3-triphenylsilylferrocene and (S)-N,N-dimethyl-1-[(R)-2-(dichlorophosphanyl)ferrocenyl]ethylamine reveal short intramolecular N[dot dot dot]P distances, which are suggestive of weak N --> P dative bonds. The aminoalkylferrocenyldichlorophosphanes can be used for the preparation of the corresponding primary phosphanes, one of which was characterised by X-ray crystallography. Optically pure (R)-N,N-dimethyl-1-[(S)-2-(phosphanyl)ferrocenyl]ethylamine can easily be lithiated twice to give the first enantiomerically pure lithium-phosphorus closo cluster compound, which was also structurally characterised.     

Anhydride-functionalized fullerene: a versatile precursor for fullerene-based materials

Soluble phthalic anhydride-functionalized fullerene was generated via simple pyrolysis of the corresponding di-t-butyl phthalate precursor at 200 °C for 120 min. This non-chemical method for generating electrophilic fullerene may be advantageous for the preparation of various fullerene-containing materials. The utility of the resulting fullerene anhydride was demonstrated by solution coupling reaction with PEG-amine, surface reaction with amine-functionalized glass, and hydrolysis reaction to form amphiphilic fullerene.     

Advanced energetic materials: novel strategies and versatile applications

Novel efficient synthetic strategies, including green methodologies, to basic and perspective high-energy density compounds, bearing active oxygen sources (C-, N- and O-nitro groups and N-oxide fragments) and high-enthalpy polynitrogen heterocycles, are briefly overviewed. Recently developed synthetic approaches to nitro group-free hypergolic ionic liquids (HILs) and strained 1,5-diaza- bicyclo[3.1.0]hexane derivatives capable of ultrafast ignition upon mixing with an oxidizer, and to high-energy liquid hydrocarbons with strained cyclopropane fragments are also considered. Physicochemical properties, energetic performances and potential applications of energetic compounds and composites as key components of explosives, powders and solid or liquid rocket propellants are critically discussed with a focus on original reports published in the period 2016–2021.     

Polymer blends containing liquid crystal polymers

Polymer blends can be either composed of mixtures of flexible components, of a stiff chain and a flexible macromolecule, or of two stiff-chain polymers. All three cases may be dealt with in terms of the Flory lattice model. Special attention is paid to the influence of liquid crystalline order on the miscibility of the two polymers. For isotropic mixtures all three cases may be described in terms of the usual Flory–Huggins approximation. If a nematic phase is formed the miscibility of blends of rigid rods with flexible macromolecules (molecular composites) is strongly reduced because of entropic reasons. Highly ordered mixture of two stiff-chain polymers in melt can be described in terms of the regular solution theory leading to the same miscibility criterion as is valid for two flexible polymers. All deductions are compared to recent experimental work.     

Synthesis of formyl-thienylpyrroles: versatile building blocks for NLO materials

Several formyl-substituted 1-alkyl(aryl)-2-(2′-thienyl)pyrroles 3-7 were synthesized by functionalization of the pyrrole or thiophene ring of thienylpyrroles 2 using different methods: Vilsmeier formylation or metalation followed by reaction with DMF.     

DNA meets synthetic polymers--highly versatile hybrid materials

The combination of synthetic polymers and DNA has provided biologists, chemists and materials scientists with a fascinating new hybrid material. The challenges in preparing these molecular chimeras were overcome by different synthetic strategies that rely on coupling the nucleic acid moiety and the organic polymer in solution or on solid supports. The morphologies and functions of the bioorganic block copolymers can be controlled by the nature of the synthetic polymer segment as well as by the sequence composition and length of the DNA. Recent developments have expanded the scope and applications of these hybrid materials in a number of different areas including biology and medicine, as well as bio- and nanotechnology. Their usage ranges from gene delivery through to DNA detection to programmable nano-containers for DNA-templated organic reactions.     

Synthesis and properties of new functionalized guanidinium based ionic liquids as non-toxic versatile organic materials

Functionalized guanidinium ionic liquids as a new class of versatile organic materials have been developed. Guanidinium salts containing olefinic functionalities have been prepared and completely characterized. In order to illustrate the versatility of olefinic units, they were brominated and some bromine-containing ionic liquids have been obtained. Relevant physico-chemical properties of the new synthesized salts were evaluated including their melting points, glass transition temperatures, miscibilities, densities, surface tensions and contact angles with glass and Teflon surfaces. Additionally toxicity studies were performed using the human colon carcinoma CaCo-2 cell line. Several new functionalized guanidinium based ILs showed high densities, low contact angles with Teflon, low surface tensions as well as a non-toxic behaviour.     

Polymer channel chips as versatile tools in microchemistry.

The paper describes the fabrication and chemical applications of polymer microchannel chips, with special reference to in situ observations of the chemical/physical processes occurring in polystyrene microchannel chips, including those in microchannel-microelectrode/microheater chips. On the basis of absorption/fluorescence microspectroscopy and microelectrochemistry techniques, we show some characteristic features of liquid/liquid extraction, electrochemical responses, and photochemical/electrochemical/thermal synthetic reactions in microchannel chips.     

Benzoxazine-bismaleimide blends: Curing and thermal properties

A blend of bisphenol A based benzoxazine (Bz-A) and a bismaleimide (2,2-bis[4(4-maleimidophenoxy) phenyl] propane (BMI), was thermally polymerised in varying proportions and their cure and thermal characteristics were investigated. The differential scanning calorimetric analysis, supplemented by rheology confirmed a lowering of the cure temperature of BMI in the blend implying catalysis of the maleimide polymerisation by benzoxazine. FTIR studies provided evidences for the H-bonding between carbonyl group of BMI and -OH group of polybenzoxazine in the cured matrix. The cured matrix manifested a dual phase behaviour in SEM and DMTA with the minor phase constituted by polybenzoxazine dispersed in an interpenetrating polymer network (IPN) of polybenzoxazine and cured BMI. The IPN possessed improved thermal stability over the constituent polybenzoxazine. A benzoxazine monomer possessing allyl functional groups, 2,2′-bis(8-allyl-3-phenyl-3,4-dihydro-2H-1,3-benzoxazinyl) propane (Bz-allyl) was reactively blended with the same bismaleimide in varying stoichiometric ratios (Bz-allyl/BMI), where the curing involved mainly Alder-ene reaction between allyl- and maleimides groups and ring-opening polymerisation of benzoxazine. The rheological analysis showed the absence of catalytic polymerisation of BMI in this case. The overall processing temperature was lowered in the blend owing to the co-reaction of the two systems to form a single-phase matrix. The cured resins of both Bz-A/BMI and Bz-allyl/BMI blends exhibited better thermal stability than the respective polybenzoxazines. The T_g of the IPN was significantly improved over that of polybenzoxazine (Bz-A). However, the co-reaction resulted in a marginal decrease in the T_g of the system in comparison to the polybenzoxazine (Bz-allyl).     

Polymer materials based on ethylene copolymers with substituted norbornene

The copolymers of ethylene with 5-ethylidene-2-norbornene containing 10–65% of the cyclic comonomer have been prepared with the use of three ansa-metallocene catalysts, namely, Et[Ind]₂ZrCl₂-methylaluminoxane, Et[IndH₄]₂ZrCl₂-methylaluminoxane, and Me₂Si[Ind]₂ZrCl₂-methylaluminoxane. Side groups >C=CH-CH₃ capable of participation in the ozonolysis reaction have been incorporated into polymer chains via the copolymerization of ethylene with the cyclic comonomer. As evidenced by DSC, and X-ray diffraction, and very cold neutron scattering measurements of the supramolecular structure of the copolymers, the enrichment of the copolymer with the cyclic comonomer causes transformation of the ethylene-5-ethylidene-2-norbornene copolymer from the semicrystalline state to the amorphous state. This effect is accompanied by an increase in the density and optical transparency of the material and a rise in its glass transition temperature. Among the copolymers under study, the highest T _g (83°C) is exhibited by the copolymer synthesized with the Et[Ind]₂ZrCl₂-methylaluminoxane catalyst and containing 30 mol % 5-ethylidene-2-norbornene.     

Polymer colloids in photonic materials

Exciting materials known as photonic band-gap materials have come upon the materials science scene and are being studied by many research groups around the world. These new materials operate on light in a way very analogous to the way semiconductors operate on electrons to produce very fast electronic switching and computing circuits. It is imagined that the successful fabrication of these materials will lead to computing machines operating on light and yielding the ultimate speeds in information processing, as electrons typically move only at about one tenth to one half the speed of light. Such devices will require much less heat dissipation and may lead to further miniaturization of computing circuits. New applications in diverse chemical and biochemical sensing are also emerging from these photonic materials. Separation and filtration materials and diverse mesoporous materials and composites are also being developed that rely on such photonic arrays and assemblies as fabrication templates. Polymer colloids in the size range of tens of nm to tens of microns are key components in such new materials and processes. A major limitation in the production of such new materials and devices is that fabrication of such arrays and assemblies is extremely slow and unsuitable for practical manufacturing. Crystallization of charged colloidal suspensions, annealing of core–shell particle arrays, epitaxial growth of crystals from two–dimensional templates, and annealing of thermoreversible gel particle arrays are being explored to ameliorate these limitations. To cite this article: J. Texter, C. R. Chimie 6 (2003).     

Silicone-based polymer blends: Enhancing properties through compatibilization

Polymer blending is a cost-effective way to control the properties of soft materials, but the propensity for blends to macrophase separate motivates the development of efficient compatibilization strategies. Across this broad area, compatibilization is particularly important for polysiloxanes, which exhibit strong repulsive interactions with most organic polymers. This review analyzes state-of-the-art polysiloxane compatibilization strategies for silicone–organic polymer blends. Emphasis is placed on chemical innovation in the design of compatibilization agents that may expedite the commercialization of new silicone–organic materials. We anticipate that hybrid silicone blends will continue to play an important role in fundamental and applied materials science across industry and academia.     

Polymer blends based on the β-modification of polypropylene

iPP/sPP, iPP/rPP, iPP/PVDF and iPP/PA-6 blends, and their β-nucleated forms were prepared in the present study. The components of iPP/sPP and iPP/rPP blends are compatible in the molten state. The phase structure of the melt of iPP/PVDF and iPP/PA-6 blends is heterogeneous. The melting and crystallisation characteristics as well as the structure and polymorphic composition of these blends were studied by polarised light microscopy (PLM) and differential scanning calorimetry (DSC). When semicrystalline polymers are added to iPP, the most important factor of the formation a blend with β-crystalline phase is the α-nucleation effect of the second polymer. In the case of polymers with an α-nucleating effect, the temperature range of their crystallisation should be lower than that of β-iPP. β-nucleated iPP/PVDF and iPP/PA-6 blends are extreme examples showing that completely β-iPP matrix can not form even in the presence of a highly effective β-nucleant, because of the strong α-nucleating ability and higher crystallisation temperature range of PVDF and PA-6. We found that the β-crystallisation tendency of random propylene copolymers can be enhanced by adding an iPP homopolymer.     

Hydroxydialkylamino cruciforms: amphoteric materials with unique photophysical properties

Two amphoteric cruciforms 6 and 7 (XF; 4,4'-[(1E,1'E)-(2,5-bis{[4-(dibutylamino)phenyl]ethynyl}-1,4-phenylene)bis(ethene-2,1-diyl)]diphenol, 4,4'-[{2,5-bis[(E)-4-(dibutylamino)styryl]-1,4-phenylene}bis(ethyne-2,1-diyl)]diphenol) were prepared by a Horner reaction followed by a Sonogashira coupling and subsequent deprotection. The XFs display significant changes in absorption and emission when exposed to trifluoroacetic acid, tetrabutylammonium hydroxide, and metal triflates. The substitution pattern of 6 and 7 leads to spatial separation of the frontier molecular orbitals, which allows the HOMO or LUMO of the XF to be addressed independently by acidic or basic agents. XF 6, which has hydroxyl groups on the styryl axis, displays changes in emission color upon exposure to ten amines in eight different solvents. The change in fluorescence upon the addition of amines was analyzed by linear discriminant analysis. These XFs may have potential in sensor applications for metal cations and amines.     

Polymer materials of medical purpose and materials for dentistry

A wide range of polymer materials for medical purposes based on polysiloxane developed at the State Research Institute of Building Structures is presented. The properties of compositions cured by both end hydroxyl groups and the reaction of hydroxylation are considered and examples of their applications are presented.