细胞膜仿生修饰树枝状聚酰胺-胺的研究

利用2-丙烯酰氧基乙基磷酸胆碱的双键与树枝状聚酰胺-胺表面的氨基进行Michael加成反应,实现树枝状聚酰胺-胺表面的磷酸胆碱仿生修饰,修饰过程用FTIR、1H-NMR进行了表征.体外细胞活性测定和细胞形貌观察证实磷酸胆碱仿生修饰有效地改善了聚酰胺-胺树枝状聚合物的生物相容性;修饰后的聚酰胺-胺树枝状聚合物表面剩余的氨基仍然可以有效的与DNA复合,有可能作为一种潜在的基因载体得到广泛应用.     

Two-dimensional densely packed DNA nanostructure derived from DNA complexation with a low-generation poly(amidoamine) dendrimer

One of the keys for using deoxyribonucleic acid (DNA) as a nanomaterial relies on how the individual DNA chain can be aligned and how a multitude of DNA chains can be packed into ordered nanostructures. Here we present a simple method for constructing a 2-D densely packed DNA nanostructure using the electrostatic complex of DNA with a poly(amidoamine) (PAMAM) dendrimer of generation two. Ordered DNA arrays are formed by drop-casting an aqueous solution containing positively overcharged complexes onto mica followed by a prolonged incubation. During the incubation, the complexes tend to adsorb onto the negatively charged mica surface through electrostatic attraction. The rodlike complexes organize to form ordered arrays to increase the surface density of the adsorbed complexes and hence the attractive free energy of adsorption. The densely packed nanostructure obtained here is distinguished from the previously reported spheroid or toroid structure derived from DNA complexations with the higher-generation dendrimers.     

Structural analysis of poly(amidoamine) dendrimer immobilized in crosslinked poly(ethylene glycol)

Polymeric membranes comprised of poly(amidoamine) (PAMAM) dendrimer immobilized in a poly(ethylene glycol) (PEG) network exhibit an excellent CO₂ separation selectivity over H₂. The CO₂ permeability increases with PAMAM dendrimer concentration in the polymeric membrane and becomes 500 times greater than H₂ permeability when the dendrimer content was 50 wt % at ambient conditions (5 kPa of CO₂ partial pressure). However, the detailed morphology of the membrane has not been discussed. The immiscibility of PAMAM dendrimer and PEG matrix results in phase separation, which takes place in a couple of microns scale. Especially, laser scanning confocal microscope captures a 3D morphology of the polymeric blend. The obtained 3D reconstructions demonstrate a bicontinuous structure of PAMAM dendrimer‐rich and PEG‐rich phases, which indicates the presence of PAMAM dendrimer channel penetrating the polymeric membrane, and CO₂ will preferentially pass through the dendrimer channel. In addition, Fourier transform of the 3D reconstructions indicates the presence of a periodic structure. An average size of the dendrimer domain calculated is 2–4 μm in proportion to PAMAM dendrimer concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Shape‐Persistent and Adaptive Multivalency: Rigid Transgeden (TGD) and Flexible PAMAM Dendrimers for Heparin Binding

This study investigates transgeden (TGD) dendrimers (polyamidoamine (PAMAM)‐type dendrimers modified with rigid polyphenylenevinylene (PPV) cores) and compares their heparin‐binding ability with commercially available PAMAM dendrimers. Although the peripheral ligands are near‐identical between the two dendrimer families, their heparin binding is very different. At low generation (G1), TGD outperforms PAMAM, but at higher generation (G2 and G3), the PAMAMs are better. Heparin binding also depends strongly on the dendrimer/heparin ratio. We explain these effects using multiscale modelling. TGD dendrimers exhibit “shape‐persistent multivalency”; the rigidity means that small clusters of surface amines are locally well optimised for target binding, but it prevents the overall nanoscale structure from rearranging to maximise its contacts with a single heparin chain. Conversely, PAMAM dendrimers exhibit “adaptive multivalency”; the flexibility means individual surface ligands are not so well optimised locally to bind heparin chains, but the nanostructure can adapt more easily and maximise its binding contacts. As such, this study exemplifies important new paradigms in multivalent biomolecular recognition.     

树状大分子PAMAM(1G)-FCD的合成及荧光性能

合成了外围由小分子2-芴醛修饰的树状大分子PAMAM(1G)-FCD, 用IR, 1H NMR, MALDI-TOF-MS等手段表征了其结构, 并对其荧光性能及Sn2+对该性能的影响进行了研究, 结果表明, Sn2+能使化合物荧光显著增强. 紫外光谱表明, 随着PAMAM(1G)-FCD溶液中Sn2+浓度的增加, 体系在360 nm处出现了新的吸收峰, 表明二者之间存在化学反应. 故该树状分子有望作为难得的蓝光区荧光材料及金属-树状大分子杂化材料.     

EPR characterization of gadolinium(III)-containing-PAMAM-dendrimers in the absence and in the presence of paramagnetic probes

Gd(III)-containing dendrimers are promising contrast agents for magnetic resonance imaging (MRI). An important issue in the effectiveness and toxicity of a Gd(III) based MRI contrast agent is knowledge of the relative locations and concentrations of Gd(III) in dendrimer drug delivery hosts. In order to provide experimental information on this issue, we have investigated the electron paramagnetic resonance (EPR) of a stable Gd(III) complex with diethylenetriaminepentaacetic acid (DTPA) in various polyammidoamine (PAMAM) dendrimers as a function of dendrimer generation (G2, G4, and G6), dendrimer core (ethylenediamine = EDA, and cystamine = cys), and dendrimer surface functionality (NH(2), 5-oxo-3-pyrrolidinecarboxylic acid methyl ester = pyr, and tris(hydroxymethyl) methylamine = tris). The dendrimer systems were investigated in the presence and absence of paramagnetic probes, that is, Cu(II) and nitroxide radicals (4-(trimethylammonium and dodecyl-dimethylammonium) 2,2,6,6-tetramethylpiperidine 1-oxyl bromide = CAT1 and CAT12, respectively). The analysis of the EPR spectra revealed anisotropic locations of Gd-DTPA inside the dendrimer. Computer analysis of the EPR spectra of the probes identified the interactions of the Gd-dendrimers with ions and organic molecules. The interaction between the probes and the dendrimer internal and external surface depends on the type of core, the composition of the external surface and the generation of the dendrimer. The negatively charged Gd-DTPA complex attracts the positively charged species and this provokes spin-spin interactions between Gd and the probes, which increases with a decrease in generation, mainly from G6 to G4, and with an increase in both the Gd-dendrimer concentration and the probe concentration. The cys core increases the internal volume and decreases the packing of the branches.     

Synthesis and characterization of tri(ethylene oxide)-attached poly(amidoamine) dendrimer layers on gold

This paper describes the synthesis of a tri(ethylene oxide)-attached fourth-generation poly(amidoamine) dendrimer (EO3-dendrimer) and the characterization of its layers on gold. NMR analysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry revealed that about 61 amine groups of a G4 PAMAM dendrimer were covalently conjugated with tri(ethylene oxide) units, accounting for a 95% modification level. Layers of the EO3-dendrimer were formed on gold, and the resulting surface was characterized by infrared reflection absorption spectroscopy, ellipsometry, and contact angle goniometry. The EO3-dendrimer resulted in more hydrophilic and less compact layers with no substantial deformation of the molecule during layer formation by virtue of the EO3 units, compared to a PAMAM dendrimer. Interestingly, the specific binding of avidin to the biotinylated layers of the EO3-dendrimer approached a surface density of 5.2 +/- 0.2 ngmm-2, showing about 92% of full surface coverage. The layers of the EO3-dendrimer were found to be more resistant to nonspecific adsorption of proteins than PAMAM dendrimer layers when bovine serum albumin and serum proteins were tested.     

Interaction forces between poly(amidoamine) (PAMAM) dendrimers adsorbed on gold surfaces

Interaction forces between two gold surfaces with adsorbed poly(amidoamine) (PAMAM) dendrimers (generations G3.0 and G5.0) have been investigated using colloidal probe atomic force microscopy (AFM). In the absence of dendrimers or at their low concentrations, an attractive force derived from the van der Waals interaction was observed. On the other hand, this attractive interaction changed to repulsion with increasing dendrimer concentration. The origin of the repulsion can be attributed to either an electric double layer interaction or a steric effect of the adsorbed dendrimers, depending on the concentration of dendrimer. The steric hindrance was also influenced by the generation of the dendrimer; the force-detectable distance in the presence of PAMAM G5.0 dendrimer was slightly longer than that in the presence of G3.0 dendrimer. In order to estimate the occupied area of each dendrimer adsorbed on gold, quartz crystal microbalance (QCM) measurement was also carried out.     

SiO2–poly(amidoamine) dendrimer inorganic/organic hybrids

SiO₂–poly(amidoamine) (PAMAM) dendrimer hybrids were synthesized via (1) a Michael addition reaction between the dendrimer and 3‐(trimethoxysilyl) propyl acrylate, (2) the dissolution of the formed compound in methanol, and (3) the mixing of the latter solution with a methanol solution of partly hydrolyzed tetraethylorthosilicate (TEOS) and its casting on a glass substrate. ¹H NMR indicated that in the first step, 77% of the secondary amines were converted into tertiary amines when the fourth‐generation dendrimer was employed and 46% were converted when the second‐generation dendrimer was used. The final SiO₂–PAMAM dendrimer hybrids were obtained via the hydrolysis and condensation of the compound obtained via the Michael addition and the methanol solution of partly hydrolyzed TEOS. The compartmentalized structure of the hybrids due to the compartments of the dendrimers could be controlled by changing the dendrimer and the amount of TEOS. Scanning electron microscopy and transmission electron microscopy micrographs provided information about the structure of the hybrids. Like the PAMAM dendrimer, the SiO₂–PAMAM dendrimer hybrids exhibited a high metal ion complexing capacity because of the presence of the compartments of the dendrimer; they can be, however, much more easily handled, and, as demonstrated by thermogravimetric experiments, have much higher thermal resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1443–1449, 2000     

Direct force measurements between adlayers consisting of poly(amidoamine) dendrimers with primary amino groups or quaternary ammonium groups

Adsorption of poly(amidoamine) generation 3 (PAMAM G3) dendrimer with surface amino groups or PAMAM G0 dendrimer with quaternary ammonium groups (C8qbG0) onto glass has been studied by colloidal probe atomic force microscopy. The adlayer-adlayer interactions for these adsorbates are quite different despite the fact that they are almost equal in the hydrodynamic radius. In aqueous PAMAM G3 dendrimer solutions the electrostatic repulsion is predominant. The conformation of the adsorbed layer is flat and the protrusion of the individual dendrimers is negligible. On the other hand, C8qbG0 behaves as a surfactant and the layered structure of C8qbG0 is expected to be a patchy bilayer. Dispersion stability of silica suspensions with the adsorption of these dendrimers can be correlated with the force data obtained.     

Visual observation of avidin-biotin affinity by fluorescent G4.5 poly(amidoamine) dendrimer

An air-treated G4.5 poly(amidoamine) (PAMAM) dendrimer displayed the enhanced fluorescence enough to be utilized as a fluorescence marker to visualize avidin-biotin affinity: On a fluorescence microscopic image, the avidin labeled by a fluorescent G4.5 PAMAM dendrimer was observed to be selectively bound on the biotin pattern that was prepared by amide-bonding of biotin on a carboxylic acid-terminated self-assembled monolayer and in turn by UV-irradiation with a photomask on the monolayer.     

Study on elution behavior of poly(amidoamine) dendrimers and their interaction with bovine serum albumin in asymmetrical flow field-flow fractionation

Polyamidoamine (PAMAM) dendrimers have an amine surface and an ethylenediamine core and are of great interest in various applications such as in drug delivery. Physiochemical properties of PAMAM dendrimers vary with pH. At neutral to basic pH, PAMAM dendrimers are either weakly charged or uncharged and tend to adsorb on to the neutral packing material, making chromatographic separation of the dendrimers difficult. Asymmetrical flow field-flow fractionation (AsFlFFF) was tested as an alternative to the chromatographic techniques for separation of the PAMAM dendrimers. AsFlFFF provided generation-based separation of the dendrimers even at neutral and basic pH. The elution time increased gradually as the generation number (and thus the size) increased. Separation of impurities such as generational or missing-arm impurities and aggregates from the main population was also achieved. Electrostatic and hydrophobic interactions (e.g., repulsive elecrostatic interaction among the dendrimer molecules or attractive hydrophobic interaction between the dendrimer molecules and the membrane) may result in an inaccurate size measurement. Careful optimization of experimental conditions such as the flow rate, pH, and the salt concentration may be required to minimize the interactions with the membrane. AsFlFFF was also tested for a study on the interaction between the PAMAM dendrimers and proteins. AsFlFFF was able to show the growth in the size of bovine serum albumin (BSA) when BSA is mixed with increasing amounts of PAMAM dendrimers. Results suggest that, with proper optimization, AsFlFFF could become a useful tool for separation and characterization of large charged molecules such as PAMAM dendrimers.     

Quantitative FT-IRRAS spectroscopic studies of the interaction of avidin with biotin on functionalized quartz surfaces

The interaction of avidin with biotin was studied on functionalized quartz surfaces terminated with 3-aminopropyltrimethoxysilane (3-APTMS), 2,2'-(ethylenedioxy)bis(ethylenediamine) (DADOO), and fourth-generation amine-terminated polyamidoamine (G4-NH2 PAMAM) dendrimers with the use of Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS). In particular, the molecular recognition ability of these surfaces was quantified through FT-IRRAS in combination with the use of an alkyne dicobalt hexacarbonyl probe coupled with avidin. The degree of nonspecific adsorption of avidin was determined by exposure of the amine-terminated and/or biotinylated surfaces to solutions of biotin-saturated avidin. The results indicate that the biotinylated 3-APTMS layer exhibits a very low specific binding capacity for avidin (on the order of 0.15 pmol of avidin/cm2) and substantial nonspecific adsorption. Both the binding capacity and the specificity were greatly improved when the 3-APTMS layer on quartz was modified through serial chemisorption of glutaraldehyde (GA), DADOO, and/or G4-NH2 PAMAM dendrimer layers. Among these layers, the biotinylated G4-NH2 PAMAM dendrimer layer exhibited the highest capacity for avidin binding (2.02 pmol of avidin/cm2) with a specificity of approximately 90%. This effect can be attributed to the efficient packing/ordering of the binding dendrimer layer, leading to a more dense and better organized layer of biotin headgroups on the subsequent biotinylated surface.     

Preparation, characterization, resistance to protein adsorption, and specific avidin-biotin binding of poly(amidoamine) dendrimers functionalized with oligo(ethylene glycol) on gold

Protein-resistant films derived from the fifth-generation poly(amidoamine) dendrimers (PAMAM G5) functionalized with oligo(ethylene glycol) (OEG) derivatives consisting of various ethylene glycol units (EG(n), n = 3, 4, and 6) were prepared on the self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) on gold substrates. The resulting films were characterized by ellipsometry, contact angle goniometry, and X-ray photoelectron spectroscopy (XPS). About 35% of the peripheral amines of the dendrimers were reacted with N-hydroxysuccinimide-terminated EG(n) derivatives (NHS-EG(n)). The dendrimer films showed improved stability over octadecanethiolate SAMs on gold in hot solvents, attributed to the formation of multiple amide bonds per PAMAM unit with underlying NHS-activated MUA monolayer. The EG(n)-attached PAMAM surfaces with n = 3 reduced the adsorption of fibrinogen to approximately 20% monolayer, whereas 2-3% for n = 4 or 6. The dendrimer films with various densities of EG(n) molecules on PAMAM surfaces were prepared by immersion of the NHS-terminated MUA-functionalized gold substrates in ethanolic solutions containing PAMAM and NHS-EG(n) of various mole ratios. The density (r) of the EG(n) molecules on the PAMAM surfaces is consistent with the mole ratio (r') of NHS-EG(n)/free amine of PAMAM in solutions. The resistance to protein adsorption of the resulting surfaces is correlated with the surface density and the length of the EG chains. At their respective r, the EG(n)-modified dendrimer films resisted approximately 95% adsorption of fibrinogen on gold surfaces. Finally, the specific binding of avidin to the approximately 5% and approximately 40% biotinylated EG3 dendrimers (surface density of biotin with respect to the total number of terminal amino groups on PAMAM G5) gave rise to about 50% and 100% surface coverage by avidin, respectively.     

Preparation and characterization of novel physically cross-linked hydrogels composed of poly(vinyl alcohol) and amine-terminated polyamidoamine dendrimer

Poly(vinyl alcohol) (PVA) and polyamidoamine (PAMAM) dendrimers are water-soluble, biocompatible and biodegradable polymers, which have been widely applied in biomedical fields. In this paper, novel physically cross-linked hydrogels composed of PVA and amine-terminated PAMAM dendrimer G6-NH(2) were prepared by cyclic freezing/thawing treatment of aqueous solutions containing PVA and G6-NH(2). The FT-IR analysis and elemental analysis indicated that PAMAM dendrimer G6-NH(2) was successfully introduced into the formed hydrogels, possibly via hydrogen bonds among hydroxyl groups, amide groups and amino groups in PVA and PAMAM dendrimer in the process of freezing-thawing cycle. Compared with physically cross-linked PVA hydrogel, PVA/G6-NH(2) hydrogels show higher swelling ratios and faster re-swelling rate due to the higher hydrophilicity of PAMAM dendrimer G6-NH(2). Higher contents of G6-NH(2) in PVA/G6-NH(2) hydrogels resulted in higher swelling ratios and faster re-swelling rates. With increasing freezing/thawing cyclic times, the swelling ratios and re-swelling rates of PVA/G6-NH(2) hydrogels decreased, which is similar to that of physically cross-linked PVA hydrogel. Combining the special host property of polyamidoamine dendrimer, these novel physically cross-linked hydrogels are expected to have potential use in drug delivery, including improving drug-loading amounts in hydrogels and prolonging drug release time. Swelling ratios of physically cross-linked PVA/G6-NH(2)-50 hydrogels prepared by three, six, nine freezing/thawing cycles. The swelling equilibrium experiments were carried out in distilled water at 25 degrees C.     

Dendritic chelating agents. 1. Cu(II) binding to ethylene diamine core poly(amidoamine) dendrimers in aqueous solutions

This paper describes an investigation of the uptake of Cu(II) by poly(amidoamine) (PAMAM) dendrimers with an ethylenediamine (EDA) core in aqueous solutions. We use bench scale measurements of proton and metal ion binding to assess the effects of (i) metal ion-dendrimer loading, (ii) dendrimer generation/terminal group chemistry, and (iii) solution pH on the extent of binding of Cu(II) in aqueous solutions of EDA core PAMAM dendrimers with primary amine, succinamic acid, glycidol, and acetamide terminal groups. We employ extended X-ray absorption fine structure (EXAFS) spectroscopy to probe the structures of Cu(II) complexes with Gx-NH2 EDA core PAMAM dendrimers in aqueous solutions at pH 7.0. The overall results of the proton and metal ion binding measurements suggest that the uptake of Cu(II) by EDA core PAMAM dendrimers involves both the dendrimer tertiary amine and terminal groups. However, the extents of protonation of these groups control the ability of the dendrimers to bind Cu(II). Analysis of the EXAFS spectra suggests that Cu(II) forms octahedral complexes involving the tertiary amine groups of Gx-NH2 EDA core PAMAM dendrimers at pH 7.0. The central Cu(II) metal ion of each of these complexes appears to be coordinated to 2-4 dendrimer tertiary amine groups located in the equatorial plane and 2 axial water molecules. Finally, we combine the results of our experiments with literature data to formulate and evaluate a phenomenological model of Cu(II) uptake by Gx-NH2 PAMAM dendrimers in aqueous solutions. At low metal ion-dendrimer loadings, the model provides a good fit of the measured extent of binding of Cu(II) in aqueous solutions of G4-NH2 and G5-NH2 PAMAM dendrimers at pH 7.0.     

Cationic poly(amidoamine) dendrimers as additives for capillary electroseparation and detection of proteins

We examine the influence of cationic poly(amidoamine) (PAMAM) dendrimers on capillary electroseparation–UV analysis of proteins. PAMAMs adsorbing to the capillary surface suppressed the wall‐adsorption of proteins; meanwhile, PAMAMs added to the buffer exhibited selectivity toward proteins. Presence of 3×10^?4 g/mL PAMAM generation one (G 1.0) in 30 mM phosphate, at pH 2.6, rendered significant enhancement in separation efficiency; the merged peaks of myoglobin and trypsin inhibitor were separated. Moreover, the protein–dendrimer interactions changed the inherent UV absorbance profiles of proteins. UV–Vis study showed that the absorbance of cytochrome C and transferrin increased at the detection wavelength of 214 nm; their detection sensitivity enhanced by 2.44 and 2.01‐folds, respectively, with addition of 5×10^?4 g/mL PAMAM G 1.0.     

Molecular heterogeneity analysis of poly(amidoamine) dendrimer-based mono- and multifunctional nanodevices by capillary electrophoresis

Poly(amidoamine) (PAMAM) dendrimer-based nanodevices are of recent interest in targeted cancer therapy. Characterization of mono- and multifunctional PAMAM-based nanodevices remains a great challenge because of their molecular complexity. In this work, various mono- and multifunctional nanodevices based on PAMAM G5 (generation 5) dendrimer were characterized by UV-Vis spectrometry, (1)H NMR, size exclusion chromatography (SEC), and capillary electrophoresis (CE). CE was extensively utilized to measure the molecular heterogeneity of these PAMAM-based nanodevices. G5-FA (FA denotes folic acid) conjugates (synthesized from amine-terminated G5.NH(2) dendrimer, approach 1) with acetamide and amine termini exhibit bimodal or multi-modal distributions. In contrast, G5-FA and bifunctional G5-FA-MTX (MTX denotes methotrexate) conjugates with hydroxyl termini display a single modal distribution. Multifunctional G5.Ac(n)-FI-FA, G5.Ac(n)-FA-OH-MTX, and G5.Ac(n)-FI-FA-OH-MTX (Ac denotes acetamide; FI denotes fluorescein) nanodevices (synthesized from partially acetylated G5 dendrimer, approach 2) exhibit a monodisperse distribution. It indicates that the molecular distribution of PAMAM conjugates largely depends on the homogeneity of starting materials, the synthetic approaches, and the final functionalization steps. Hydroxylation functionalization of dendrimers masks the dispersity of the final PAMAM nanodevices in both synthetic approaches. The applied CE analysis of mono- and multifunctional PAMAM-based nanodevices provides a powerful tool to evaluate the molecular heterogeneity of complex dendrimer conjugate nanodevices for targeted cancer therapeutics.     

Structure of poly(propyl ether imine) dendrimer from fully atomistic molecular dynamics simulation and by small angle x-ray scattering

We study the structure of carboxylic acid terminated neutral poly(propyl ether imine) (PETIM) dendrimer from generations 1-6 (G1-G6) in a good solvent (water) by fully atomistic molecular dynamics (MD) simulations. We determine as a function of generation the structural properties such as radius of gyration, shape tensor, asphericity, fractal dimension, monomer density distribution, and end-group distribution functions. The sizes obtained from the MD simulations have been validated by small angle x-ray scattering experiment on dendrimer of generations 2-4 (G2-G4). A good agreement between the experimental and theoretical value of radius of gyration has been observed. We find a linear increase in radius of gyration with the generation. In contrast, Rg scales as approximately Nx with the number of monomers. We find two distinct exponents depending on the generations, x=0.47 for G1-G3 and x=0.28 for G3-G6, which reveal their nonspace filling nature. In comparison with the amine terminated poly(amidoamine) (PAMAM) dendrimer, we find that Rg of Gth generation PETIM dendrimer is nearly equal to that of (G+1)th generation of PAMAM dendrimer as observed by Maiti et al. [Macromolecules 38, 979 (2005)]. We find substantial back folding of the outer subgenerations into the interior of the dendrimer. Due to their highly flexible nature of the repeating branch units, the shape of the PETIM dendrimer deviates significantly from the spherical shape and the molecules become more and more spherical as the generation increases. The interior of the dendrimer is quite open with internal cavities available for accommodating guest molecules, suggesting the use of PETIM dendrimer for guest-host applications. We also give a quantitative measure of the number of water molecules present inside the dendrimer.     

PAMAM树形分子与Cd2＋的配位作用研究及CdS/PAMAM纳米复合材料的制备与表征

CdS半导体纳米簇具有独特的光、电性能, 如何制备均匀分散的、能够稳定存在的CdS纳米簇是目前的研究热点之一. 以聚酰胺-胺(PAMAM)树形分子为模板, 原位合成了CdS纳米簇. 首先用UV-Vis分光光度法研究了与树形分子的配位机理, 得出G4.5和G5.0的平均饱和配位数分别为16和34, 并发现在G4.5PAMAM树形分子中Cd^2＋主要与最外层叔胺基配位, 在G5.0PAMAM树形分子中Cd^2＋主要与最外层伯胺基配位. 酯端基的G4.5的模板作用要明显优于胺端基的G5.0. 通过改变Cd^2＋与G4.5树形分子的摩尔比可以得到不同粒径的CdS纳米簇. 溶液的pH值对CdS纳米簇影响很大, pH在7.0左右制备的CdS纳米簇粒径小而均匀, 且溶液稳定性高. 用UV-Vis分光光度计和TEM对CdS纳米簇的大小和形貌进行了表征. 结果表明TEM观测CdS纳米簇的粒径要大于用Brus公式的估算值.