Sol-gel reaction in acrylic polymer emulsions: the effect of particle surface charge

Acrylic polymer-silica hybrid emulsions were synthesized from both anionic and cationic polymer emulsions by simple post-addition of tetraethoxysilane as a silica precursor. Solvent resistance of the films from the hybrid emulsions and the zeta-potential of the hybrid emulsions suggested the different forms of silica components in each hybrid emulsion. Thermal gravimetric analysis, 29Si NMR measurements, and transmission electron microscope observations revealed that the hybrid emulsion from the anionic polymer emulsion was a mixture of anionic polymer particles and homogeneously dissolved silicate oligomer-polymer. On the contrary, the hybrid emulsion from cationic polymer emulsion consisted of polymer core-silica shell particles. The electrostatic interaction between the cationic polymer particle surface and the silicate would be responsible for the accumulation of the silicate onto the particle surface, leading to the silica shell layer formation. The sol-gel condensation reaction of silicate in the acidic emulsion phase was revealed to be controllable by the surface charge of the coexisting particles.     

The influence of alumina passivation on nano-Al/Teflon reactions

The reaction kinetics of aluminum (Al) and polytetrafluoroethylene (PTFE or Teflon) were recently examined using nanoparticles of both Al and Teflon. Results showed a unique pre-ignition reaction (PIR) associated with the nano-Al/Teflon mixture that was not significant in the micron-Al/Teflon mixture. The PIR is caused by fluorination of the alumina (Al₂O₃) shell passivating the Al particles and reduces the onset temperature of Al ignition for nano compared with micron particle mixtures. Because the alumina shell was found to play a key role in the reaction mechanism, this communication extends our understanding of the interaction between alumina and Teflon by examining the influence of alumina particle size, and therefore surface area, on the fluorination reaction with Teflon. Differential scanning calorimetry analysis show that reaction kinetics vary dramatically as the alumina particle size is reduced from 50 to 15 nm diameter. Specifically, for 15 nm diameter alumina, the first exotherm (corresponding to the PIR) exhibits three times more heat of reaction than for the 30, 40, or 50 nm alumina particles. These results show how particle size and specific surface area affect the Al–Teflon reaction mechanism.     

High immobilization of antibacterial moieties onto monodisperse microspheres by dispersion polymerization using bicationic viologen surfmer

In order to achieve monodisperse particles with high content of antibacterial groups covalently bonded on surface, a bicationic viologen,N-hexyl-N’-(4-vinylbenzyl)-4,4’-bipyridinium bromide chloride(HW) was devised as a surfmer in dispersion polymerization of styrene(St) using a mixture of methanol(or ethylene glycol) and water as media.Effects of content of HW,its addition profile and composition of reaction media on particles size and incorporation of HW moieties were mainly investigated.The attachment of silver and gold nanoparticles on particle surface under UV irradiation ascertained the surface-bonded HW segments.SEM,TEM observations and XPS,zata potential measurements indicated that increase of initial HW contents and addition of HW(when polymerization had been performed for 3 h) led to grown particles and enhanced immobilization of HW moieties.Using a mixture of ethylene glycol and water as reaction media, small particles(520-142 nm) with highly attached HW moieties were prepared.Furthermore,antibacterial efficacy of the resultant particles against S.aureus was assayed,and particles with more HW moieties anchored on surface demonstrated greater efficiency of antibacterial activity.     

Role of emulsifier on the particle size and polymer particle size distribution using multiwavelength spectroscopy measurements

Latex emulsions depend strongly on the polymer composition, and particle size distribution, which in turn, is a function of the preparation of the latex and on the formulation and composition variables. This study reports measurements of particle size and particle size distribution of latex emulsions as function of the reaction time and the type and concentration of emulsifier by using the multiwavelength spectroscopy technique. Results show changes in the particle size of latex emulsions with the reaction time, obtaining larger particles and broader distributions with increasing of Tween 80 ratio. The steric stabilization provides the sole nonionic emulsifier is not enough to protect the polymer particle, causing the flocculation among the interactive particles, resulting in unstable latex. However, latex emulsions prepared with Tween 80 ratio <70 wt.% can stabilize efficiently the nucleated particles, probably due to the effects provided by both, the electrostatic and steric stabilization mechanisms. The same effect is shown in the curves of conversion (%) as a function of reaction time, resulting in slower polymerization rate for Tween 80 ratio >70 wt.%. On the other hand, smaller polymer particles, in all range of emulsifier mixture, have been obtained to higher emulsifier concentration.     

纳米级功能聚苯乙烯粒子组成研究

以聚过氧化物 (PPX)为引发剂和乳化剂制备纳米级聚苯乙烯粒子 .采用溶解溶胀法、红外光谱 (IR)、差示扫描量热分析 (DSC)、薄层色谱分离 (TLC)等测试手段对所制备聚苯乙烯 (PS)粒子的化学组成及其结构进行了研究 .结果发现PS纳米粒子主要由含有一定量未分解过氧化基团的PS PPX交联大分子组成 ,为进一步制备具有特殊性能的核 /壳结构高聚物奠定了基础 .     

Sol–gel nanocoating on commercial TiO<Subscript>2</Subscript> nanopowder using ultrasound

The surface of commercial titania particles was coated by a layer of silica by a two-step process which involved a power ultrasound initiated sol–gel reaction. In the first step of this solution process, aminosilane, i.e. organosilane with amino functional group, was used to modify the surface of pristine nanoparticles. Subsequent silica nanocoating was initiated and sustained under power ultrasound agitation in a mixture of surface modified particles and epoxysilane. As a result, a homogenous coverage of silica on the nanoparticles’ surface, with thickness controllable from one to several nanometers, was obtained. Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and particle surface zeta potential measurements were employed to follow steps in the process and to confirm the reaction mechanism.     

Factors affecting broadband acoustic emission measurements of a heterogeneous reaction

Broadband acoustic emission signals were obtained by attaching a piezoelectric transducer, sensitive up to 750 kHz, to the external wall of a 1 L jacketed glass reactor. Measurements were acquired of itaconic acid particles mixing in toluene; the total area of the acoustic emission signal from 55-500 kHz increased when the particle concentration, particle size or stir rate were increased. Signals at frequencies above 200 kHz were less sensitive to changes in particle size than those at lower frequencies. From calculation of the area of the signal in the range 55-200 kHz as a percentage of the signal area over the range 55-500 kHz, for mixtures of different size ranges of itaconic acid, it was possible to obtain an estimate of the mean particle size of a mixture. The heterogeneous esterification reaction of itaconic acid and 1-butanol was monitored non-invasively. A decrease in the overall acoustic signal area between 60 and 500 kHz was observed as the reaction progressed. Particle size and concentration information were contained in the amplitude of the acoustic emission signal, while the emission frequency yielded information on changes in the mean particle size.     

纳米镍在硝基苯加氢中催化性能的研究

纳米镍在硝基苯加氢中催化性能的研究左东华，张志琨，崔作林（青岛化工学院纳米材料研究所，青岛２６６０４２）关键词纳米镍，催化加氢，硝基苯．硝基化合物加氢还原是化工生产中的一个重要化工单元反应，现今工业生产中大多采用Ｒａｎｅｙ－Ｎｉ作为催化剂。但由于在Ｒ...     

Gold nanoparticle formation during bromoaurate reduction by amino acids

The synthesis and characterization of water-soluble dispersions of gold nanoparticles by the reduction of a potassium tetrabromoaurate precursor solution using the amino acids L-tyrosine, glycyl-L-tyrosine, and L-arginine using alkaline synthesis conditions are reported. The particle sizes determined by small-angle X-ray scattering (SAXS) and high-resolution transmission electron microscopy (HRTEM) measurements are found to be inversely proportional to the rate of particle formation, which was determined by time-resolved UV-visible spectrophotometry measurements, and vary very slowly at intermediate gold concentrations and rapidly at the extremes. Dispersions produced with a mixture of the two amino acids glycyl-L-tyrosine and L-tyrosine showed particle sizes and particle size distributions which were directly proportional to the ratio of the two L-amino acids, thus offering the possibility for control over the properties of the gold nanoparticle dispersions.     

TG/DTA/MS of Poly(Methyl Methacrylate), The Effect of Particle Size

Thermogravimetric analysis in conjunction with evolved gas analysis are discussed for powder PMMA, particle diameter of 0.1 mm. Furthermore, differential thermal analysis measurements were performed in both pure nitrogen and oxidative environment. These measurements are conducted to assess major differences associated with particle size. The results indicated for powder PMMA, in pure nitrogen the degradation can be described as three-step reactions, while in oxidative environment it is two-step reactions. Furthermore the reaction in both environments are mainly endothermic. This in contrast to results reported for industrial-grade PMMA with relatively larger particle size of 0.5 mm. This revised version was published online in July 2006 with corrections to the Cover Date.     

Photoinitiated dispersion polymerization of methyl methacrylate: A quick approach to prepare polymer microspheres with narrow size distribution

Photoinitiated dispersion polymerization of methyl methacrylate was carried out in a mixture of ethanol and water as dispersion medium in the presence of poly(N‐vinylpyrrolidone) (PVP) as the steric stabilizer and Darocur 1173 as photoinitiator. 93.7% of conversion was achieved within 30 min of UV irradiation at room temperature, and microspheres with 0.94 μm number–average diameter and 1.04 polydispersity index (PDI) were obtained. X‐ray photoelectron spectroscope (XPS) analysis revealed that only parts of surface of the microspheres were covered by PVP. The particle size decreased from 2.34 to 0.98 μm as the concentration of PVP stabilizer increased from 2 to 15%. Extra stabilizer (higher than 15%) has no effect on the particle size and distribution. Increasing medium polarity or decreasing monomer and photoinitiator concentration resulted in a decrease in the particle size. Solvency of reaction medium toward stabilizer, which affects the adsorption of stabilizer on the particle surface, was shown to be crucial for controlling particle size and uniformity because of the high reaction rate in photoinitiated dispersion polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1329–1338, 2008     

Effect of Poly(Vinyl Alcohol) on the Size,Shape, and Rate of Silver Nanoparticles Formation

The kinetics of cetyltrimethylammonium bromide (CTAB) stabilized silver nanoparticles have been studied spectrophotometrically at 425 nm (λ_max of silver sol) in the absence and presence of water soluble polymer (poly(vinyl alcohol); PVA). Transmission electron microscopy (TEM), ultraviolet-visible spectroscopy, and viscosity measurements were used to determine the size, shape, and the size distribution of the silver nanoparticles. The reaction follows the same behavior with respect to [CTAB], [tri-sodium citrate], and [Ag⁺] in both the media indicating the silver nonoparticles were formed through the same reaction path. The sigmoid nature of the kinetic curves suggests an autocatalytic path in the growth of nanoparticles. The reaction rate is increased by increasing [CTAB]. The presence of PVA inhibits nucleation and retards the rate of particle growth, absorbance and size of the particles. Polymer-surfactant interactions were analyzed based on the viscosity of the reaction mixture.     

Influence of octadecyl dihydrogen phosphate on the formation of active super-fine calcium carbonate

A carbonation process for the synthesis of active super-fine calcium carbonate particles from Ca(OH)(2) slurry at room temperature using a CO(2)-N(2) gas mixture was investigated. Industrial octadecyl dihydrogen phosphate (A) was added as a size-controlling additive and modifier in different reaction periods according to the pH of the medium. Analysis of the reaction products led to the conclusion that the addition of A in the digestion period could inhibit the crystal growth of calcium carbonate, while the addition of A at pH 7 of the medium could modify the surface character of the calcium carbonate particle, which was found to exhibit hydrophobic properties. From transmission electron microscopy (TEM), the hydrophobic property was attributed to the deposition of calcium alkyl phosphates, produced in the reaction mixture, onto the surface of calcium carbonate particle. IR spectra and TGA analysis of the obtained products indicated that A was bound onto the crystalline CaCO(3).     

Preparation of PEGMA-functionalized latex particles. 1. System styrene/PEGMA

Polymeric particles have been prepared by emulsion polymerization of styrene in presence of poly(ethylene glycol) methacrylate (PEGMA). The influence of the functional monomer concentration on the particle size and particle size distribution was studied. Obtained particles show dramatic change of size with temperature. This thermal sensitivity can be influenced by the amount of the PEGMA grafted onto the particle surface as well as by the presence of crosslinking agents in the reaction mixture. It is assumed that particles have a core-shell structure and the brush-like PEGMA-rich shell layer induces the collapse at elevated temperatures.     

Ozonolysis of mixed oleic acid/n-docosane particles: the roles of phase, morphology, and metastable states

The reaction kinetics of ozone with oleic acid (OA) in submicron particles containing n-docosane has been studied using aerosol CIMS (chemical ionization mass spectrometry) to monitor changes in particle composition. Internally mixed particles with X(OA) > 0.72 were found to exist as supercooled droplets when cooled to room temperature. Partial reaction of the oleic acid was seen to completely inhibit further reaction and was attributed to the formation of a metastable solid rotator phase of the n-docosane at the surface. This reaction-induced phase change is believed to prevent further reaction by slowing ozone diffusion into the particle. When these particles were cooled to 0 degrees C before reaction, they reacted to a further extent and did not demonstrate such an inhibition. This shift in reactivity upon cooling is attributed to the formation of the thermodynamically stable form of n-docosane, the triclinic solid. This transition was accompanied by an increase in the n-docosane density, which led to the development of "cracks" through which ozone can diffuse into the particle. The aerosol with X(OA) < 0.72 consisted of an external mixture of particles containing n-docosane in either the rotator or the triclinic solid phase because of the stochastic nature of the rotator --> triclinic transition. The reactivity of the oleic acid was seen to increase with increasing n-docosane content as a larger fraction of the particles underwent the rotator --> triclinic transition and therefore contained cracks at the surface. These findings demonstrate the importance of transient, metastable phases in determining particle morphology and how such morphological changes can influence rates of reactions in organic aerosols.     

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.     

Metrological effectiveness of an analytical method for volatile organic compounds standard materials using post-column reaction GC/FID system

The metrological effectiveness of an analytical method using the post-column reaction GC/FID system was evaluated. The SI-traceable certified reference material (CRM), the eight ester phthalates mixture standard solution, was used as a sample. We assigned specific value to n-eicosane and it was used as an internal standard. A known quantity of n-eicosane was added to the CRM, and the mixture was measured with the post-column reaction GC/FID system. Six phthalate esters were chromatographically separated and determined. The assigned values by our system are in good agreement with the certified values of the CRM, and the combined uncertainties of the measurements by the present system were better than those of the CRM. Our method is classified as a primary ratio method and the specific values of many organic compounds can be assigned very precisely by using a small number of reference materials. Also, the method can make it possible to avoid the purity determination of raw materials and directly to assign their specific values after the preparation of the standard mixture. Conclusively, this post-column reaction GC/FID system is very effective for the chemical metrology.     

Use of ionic liquids in the synthesis of nanocrystals and nanorods of semiconducting metal chalcogenides

We have synthesized nanoparticles of hexagonal CdS in the diameter range 3-13 nm by the reaction of cadmium acetate dihydrate with thioacetamide in imidazolium [BMIM]-based ionic liquids. We have obtained three different particle sizes of CdS by changing the anion of the ionic liquid. Addition of trioctylphosphine oxide (TOPO) to the reaction mixture causes greater monodispersity as well as smaller particle size, while addition of ethylenediamine produces nanorods of 7 nm average diameter. Hexagonal ZnS and cubic PbS nanoparticles with average diameters of 3 and 10 nm, respectively, have been prepared by the reaction of the metal acetates with thioacetamide in [BMIM][BF4]. Hexagonal CdSe nanoparticles with an average diameter 12 nm were obtained by the reaction of cadmium acetate dihydrate with dimethylselenourea in [BMIM][BF4]. In this case also we observe the same effect of the addition of TOPO as in the case of CdS. Addition of ethylenediamine to the reaction mixture gives rise to nanorods. ZnSe nanowires with a cubic structures, possible diameters in the range 70-100 nm by the reaction of zinc acetate dihydrate with dimethylselenourea in [BMIM][MeSO4]. The nanostructures obtained are single crystalline in all the cases. Most of the nanostructures show characteristic UV/Vis absorption and photoluminescence emission spectra. The thermodynamically most stable structures are generally produced in the synthesis carried out in ionic liquids.     

Precipitation polymerization in acetonitrile and 1‐propanol mixture: synthesis of monodisperse poly(styrene‐co‐divinylbenzene) microspheres with clean and smooth surface

Precipitation polymerization of styrene (St)–divinylbenzene (DVB) has been carried out using acetonitrile/1‐propanol mixture as the reaction media and 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monodisperse micron‐sized poly(St‐co‐DVB) microspheres with clean and smooth surface were synthesized in the absence of any stabilizing agent such as surfactants or steric stabilizers. The effects of various polymerization parameters such as 1‐propanol fraction in the reaction media, initiator and total monomer concentration, DVB content, polymerization time and polymerization temperature on the morphology, particle size and size distribution were investigated. It was found that smoothly shaped stable particles were obtained when less than 70 vol% of 1‐propanol was used in the media. The particle size increased with the AIBN concentration, whereas the change of uniformity was less obvious. Monodisperse microspheres were obtained when the total monomers loading ranged from 0.5 to 3 vol%. The particle diameter ranged from 2.73 to 1.87 µm with an increasing DVB content and the uniformity was enhanced. In addition, the yield of microspheres increased with the increasing total monomer, initiator, and DVB concentration and polymerization time. Copyright © 2010 John Wiley & Sons, Ltd.     

Cationic Emulsion Polymerization of Octamethylcyclotetrasiloxane (D4) in Mixtures with Alkoxysilanes

The cationic emulsion polymerization of octamethylcyclotetrasiloxane (D4) in mixtures with methyltriethoxysilane (MTES) and vinyltriethoxysilane (VTES) was studied by FTIR ATR, GC, the development of a toluene insoluble fraction of the polymer and a gravimetric analysis. The polymerization of D4 alone was also conducted for comparison and, additionally, the development of molecular weight of polydimethylsiloxane (PDMS) obtained in that process was studied by GPC. Dodecylbenzenesulphonic acid (DBSA) was used as a surfactant and catalyst. The process was carried out in a “starved feed” mode by adding dropwise the monomer mixture to the aqueous solution of DBSA. FTIR ATR spectra were recorded by the sensor placed in the probe tip of a ReactIR 15^TM apparatus. It was found that the silicone polymer formation proceeded faster when D4 was polymerized in the mixture with alkoxysilanes, especially in the beginning of the process, and that already at the beginning of the process, the partly crosslinked polymer was formed. The induction period of ca. 30 min was observed and the concentration of cyclic siloxanes (D4 and decamethylcyclopentasiloxane—D5) remained at a very low level in the course of the reaction and only traces were detected in the final product. The particle size development in the course of the reaction was also studied and it was found that the particle size distribution was bimodal and was broadening as the reaction proceeded, though this phenomenon was less distinct when D4 was polymerized in the mixtures with alkoxysilanes. The structure of the reaction product was confirmed by ²⁹Si NMR.