Polypeptide multilayer films on colloidal particles: an in situ electro-optical study

The buildup of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on beta-FeOOH colloidal particles was investigated by means of electro-optics and electrophoresis. The films were built at different (acidic) pH in the absence of salt. We found that the thickness of the film grows linearly when the fully charged PLL (at pH 5.5) is combined with almost fully charged PGA (at pH 6.5), with a thickness of about 2 nm per single layer. When the fully charged PLL is combined with weakly charged PGA (at pH 4.5), the film thickness increases exponentially with the number of deposited layers. The thickness of the exponentially growing film increases to 300 nm after deposition of 16 layers. The exponential film growth is attributed to the ability of the PLL to diffuse "in" and "out" of the film bulk at each deposition step. The variation in the electrical polarizability of the film-coated particles was also monitored as a function of the number of adsorbed layers. The result reveals that the PLL chains, which can diffuse into the film bulk, have no measurable contribution to the electro-optical effect of the films terminated with PLL. It is only due to the polarization of counterions of the PLL adsorbed on the film surface.     

Multilayers consisting of oriented charged α-helical polypeptides

Polyelectrolyte Multilayers (PEMs) consisting of cationic α-helical poly(L-lysine) (PLL) and optionally anionic poly(vinysulfate) (PVS) (i) or α-helical poly(L-glutamic acid) (PLG) (ii) were deposited at substrates texturized by parallel nanoscopic surface grooves, respectively. Using dichroic Attenuated Total Reflexion Fourier Transform Infrared (ATR-FTIR) spectroscopy the consecutive deposition, conformation and macromolecular order of stiff polyelectrolytes within PEMs were studied. From the dichroic ratios of the Amide I and Amide II bands order parameters S ⩾ 0.6 (S = 1 for high, S = 0 for low order) were obtained suggesting a significant alignment of charged α-helical polypeptides in PEMs. For the PEM consisting of PLL/PVS the deposited amount as well as the order parameter S significantly depended on the molecular weight (contour length) of PLL. Furthermore, the related opening angle γ of a model cone consisting of α-helical PLL rods was proven to be a function of both contour length and width of the confining surface grooves. AFM pictures on PEM-PLL/PVS showed anisotropically oriented worm-like structures As a second system PEMs of PLL and PLG, both in the α-helical conformation, are introduced. A high order parameter of both spectroscopically indistinguishable polypeptides was found. A model of aligned rod/coil (i) and rod/rod (ii) structures was proposed. Finally, multilayers of stiff conductive polymers like polyaniline (PANI) alternating with poly(acrylic acid) (PAC) are introduced. Preliminary results on their deposition and alignment are given.     

Reinvestigation on the buildup mechanism of alternate multilayers consisting of poly(L-glutamic acid) and poly(L-, D-, and DL-lysines)

The buildup mechanism of polypeptide multilayers prepared by the layer-by-layer deposition of a polyanion (poly(L-glutamic acid) (PGA)) and polycations (poly(L-lysine) (PLL), poly(D-lysine) (PDL), and copoly(DL-lysine)(PDLL)) was reinvestigated by using in situ ATR-IR spectroscopy. A difference spectral technique applied to analyze the spectra indicated that the deposition of both the PGA and PLL (PDL) layers accompanies the formation of secondary structures consisting mainly of the antiparallel pleated sheet (the beta-sheet) structure, and that the formation of the beta-sheet structure cannot always be explained in terms of polyanion/polycation complex formation or charge compensation between the polyanion and polycations, although it has been considered as a major process in the multilayer buildup process. Instead, the present paper proposes the following mechanism. During the deposition of the polyelectrolyte, a small amount of the beta-sheet structures are produced at the interface as a result of charge compensation between a polyelectrolyte and an oppositely charged polyelectrolyte in the multilayer. The beta-sheets act as nuclei from which further propagation of the structure takes place at the solution/multilayer interfaces. The driving force of the buildup process in the new mechanism is a kinetically favorable insolubilization of each polyelectrolyte in solution at the interfaces.     

Pore assembled multilayers of charged polypeptides in microporous membranes for ion separation

In this study, highly permeable ion-selective membranes are prepared via immobilization of polyelectrolyte multilayer networks within the inner pore structure of a microporous (pore size = 0.2 microm) support. Electrostatic layer-by-layer assembly is achieved through alternate adsorption of cationic and anionic polyelectrolytes under convective flow conditions. To initiate pore assembly, the first layer consists of covalently bound charged polypeptides (poly(L-glutamic acid) (PLGA) or poly(L-lysine) (PLL)) establishing a charged support for subsequent adsorption. Nonstoichiometric immobilization of charged multilayers within a confined pore geometry leads to an enhanced volume density of ionizable groups in the membrane phase. This overall increase in the effective charge density allows for Donnan exclusion of ionic species (especially divalent co-ions) using microporous materials characterized by permeability values that exceed conventional membrane processes. Multilayer assemblies are fabricated using both PLGA/PLL and synthetic polyelectrolytes (poly(styrenesulfonate)/poly(allylamine)) in an attempt to compare the level of adsorption and separation properties of the resulting materials. The role of salt concentration in the carrier solvent on overall polyelectrolyte adsorption was examined to determine its effect on both solute (Cl-, SO4(2-), As(V)) and water transport. Constriction of the pore size induced by multilayer propagation was monitored through permeability measurements and dextran rejection studies at each stage of the deposition process.     

Selective Interaction Between Proteins and the Outermost Surface of Polyelectrolyte Multilayers: Influence of the Polyanion Type,pH and Salt

Protein adsorption was studied by in-situ ATR-FT-IR spectroscopy of consecutively deposited polyelectrolyte multilayer systems terminated either with poly(ethyleneimine) (PEI) or polyanions, such as poly-(acrylic acid) (PAC), poly(maleic acid-co-propylene) (PMA-P) or poly(vinyl sulfate) (PVS). The influence of the polyanion type, pH and ionic strength was investigated. Negatively charged human serum albumin (HSA) was strongly repelled by multilayers terminated with weak polyanions (PAC, PMA-P), whereas moderate attraction was observed for those terminated with the strong polyanion PVS. Changing the pH from 7.4 to 5 resulted in enhanced HSA adsorption onto PAC-terminated multilayers. An increase in ionic strength diminished the attractive HSA adsorption onto PEI-terminated multilayers. For the PEI/PAC system, the biomedically relevant adsorption of human fibrinogen (FGN) is determined via its isoelectric point in accordance with three other proteins.     

Formation of polyelectrolyte multilayer architectures with embedded DMPC studied in situ by neutron reflectometry

The coupling of lipid molecules to polymer components in a planar biomimetic model membrane made of a lipid bilayer (dimyristoylphosphatidylcholine) supported by polyelectrolyte multilayers is studied. The polyelectrolyte support was prepared by layer-by-layer deposition of positively charged poly(allylamine hydrochloride) (PAH) and negatively charged poly(sodium 4-styrenesulfonate) (PSS). Two polymer sample terminations were considered: positively charged (PAH-terminated) and negatively charged (PSS-terminated). Neutron reflectometry studies showed that, whereas positively charged samples did not favor the deposition of lipid, negatively charged samples allowed the deposition of a lipid bilayer with a thickness of approximately 5 nm. In the latter case, formation of polyelectrolyte layers after the deposition of the lipid layer was also possible.     

Fabrication of interdigitated micropatterns of self-assembled polymer nanofilms containing cell-adhesive materials

Micropatterns of different biomaterials with micro- and nanoscale features and defined spatial arrangement on a single substrate are useful tools for studying cellular-level interactions, and recent reports have highlighted the strong influence of scaffold compliance in determining cell behavior. In this paper, a simple yet versatile and precise patterning technique for the fabrication of interdigitated micropatterns of nanocomposite multilayer coatings on a single substrate is demonstrated through a combination of lithography and layer-by-layer (LbL) assembly processes, termed polymer surface micromachining (PSM). The first nanofilm pattern is constructed using lithography, followed by LbL multilayer assembly and lift-off, and the process is repeated with optical alignment to obtain interdigitated patterns on the same substrate. Thus, the method is analogous to surface micromachining, except that the deposition materials are polymers and biological materials that are used to produce multilayer nanocomposite structures. A key feature of the multilayers is the capability to tune properties such as stiffness by appropriate selection of materials, deposition conditions, and postdeposition treatments. Two- and four-component systems on glass coverslips are presented to demonstrate the versatility of the approach to construct precisely defined, homogeneous nanofilm patterns. In addition, an example of a complex system used as a testbed for in vitro cell adhesion and growth is provided: micropatterns of poly(sodium 4-styrenesulfonate)/poly-L-lysine hydrobromide (PSS/PLL) and secreted phospholipase A(2)/poly(ethyleneimine) (sPLA(2)/PEI) multilayers. The interdigitated square nanofilm array patterns were obtained on a single coverslip with poly(diallyldimethylammonium chloride) (PDDA) as a cell-repellent background. Cell culture experiments show that cortical neurons respond and bind specifically to the sPLA(2) micropatterns in competition with PLL micropatterns. The fabrication and the initial biological results on the nanofilm micropatterns support the usefulness of this technique for use in studies aimed at elucidating important biological structure-function relationships, but the applicability of the fabrication method is much broader and may impact electronics, photonics, and chemical microsystems.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Preparation and Enantiospecific Binding of Chiral Polyelectrolyte Multilayers: An In-Situ ATR-FTIR Study

Summary: Two chiral polyelectrolyte multilayers (PEM) composed of poly(L-lysine) (PLL) and poly(vinylsulfate) (PVS) as well as poly(ethyleneimine-maltose) (PEI-m) and poly(vinylsulfate) and a nonchiral PEM composed of poly(ethyleneimine) (PEI) and poly(vinylsulfate) were deposited on a silica surface using the layer by layer method. For both PEM enantiospecific interaction towards one enantiomer of either L-/D- glutamic acid (L-/D-GLU) or L-/D-ascorbic acid (L-/D-ASC), respectively, was checked under variation of the concentration. Both deposition and enantiospecific interaction were studied by attenuated total reflection Fourier transform (ATR-FTIR) spectroscopy. Preliminary results show a significant enantiospecific preference of D- GLU over L-GLU at PEM of PLL/PVS and of D-ASC over L-ASC at PEM of PEI-m/PVS and no such preference for nonchiral PEM of PEI/PVS. PEM of PLL/PVS shows higher enantiospecifity with increasing L-/D-GLU concentration.     

Release of a dye from hydrogen-bonded and electrostatically assembled polymer films triggered by adsorption of a polyelectrolyte

The absorption of dyes within hydrogen-bonded and electrostatically assembled multilayers and subsequent release of the dyes from the films were studied in situ using FTIR-ATR. Multilayers were composed of poly(methacrylic acid), PMAA, and poly(ethylene oxide), PEO (hydrogen-bonded multilayers), or of PMAA and 22% quarternized copolymer of N-ethyl-4-vinylpyridium bromide and 4-vinylpyridine, Q22 (electrostatically stabilized multilayers). After multilayer deposition, the solution pH was changed to produce excess charge within the films. Dyes with charge opposite to the excess charge of the film (Rhodamine 6G for hydrogen-bonded films or Bromophenol Blue for electrostatically assembled multilayers) were then allowed to absorb within multilayers. In both systems, the dyes were uniformly included within the films. The top layers largely affected the loading capacity of the multilayers, suggesting weaker binding of the dyes with the top layers. Dye release into a 0.01 M phosphate buffer was significantly smaller as compared to release in the presence of 0.05-0.5 mg/mL solutions of adsorbing polymers whose charge was the same as the excess charge within the films. We found that with the PMAA/PEO films, dye release did not depend on the concentration of polymer in solution, but was largely controlled by the amount of charge accumulated within the adsorbing polymer layer on the top of the film. For electrostatically stabilized PMAA/Q22 systems, dye release increased with increasing concentration of Q22 in solution, suggesting a significant contribution of the competition of solution species in the release mechanism. Our findings contribute to the understanding of interactions of small molecules with polymer multilayers and might have ramifications for novel applications of multilayer films as new materials for the controlled delivery of chemicals.     

Perturbation of nanoscale structure of polypeptide multilayer thin films

Multilayer thin films formed by sequential deposition of oppositely charged polypeptides on a charged surface are known from previous studies to comprise a mixture of types of secondary structure. Here, study of the perturbation of polypeptide film structure by deposition of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate) (PSS) on the film surface has revealed differences in behavior attributable to physical properties of the peptides. The methods of analysis were circular dichroism spectroscopy (CD), ultraviolet spectroscopy (UVS), and quartz crystal microbalance (QCM). Films made of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) with an average charge per monomer of about 1 were substantially more susceptible to perturbation of structure than films made of designed polypeptides with an average charge per monomer of about 0.5, despite preparation under identical conditions. PLL-PLGA films showed loss or gain of material and change in secondary structure content on perturbation, whether made of high molecular mass (ca. 90 kDa) or low molecular mass (ca. 14 kDa) polymers. By contrast, films made of very low molecular mass (ca. 3.5 kDa) designed polypeptides showed little change in secondary structure content. The data suggest that the penetrability of PSS or PAH into a film and therefore film density can depend substantially on the polypeptides of which it is made and the character of intermolecular interactions.     

Influence of the molecular architecture on the adsorption onto solid surfaces: comb-like polymers

The processes of adsorption of grafted copolymers onto negatively charged surfaces were studied using a dissipative quartz crystal microbalance (D-QCM) and ellipsometry. The control parameters in the study of the adsorption are the existence or absence on the molecular architecture of grafted polyethyleneglycol (PEG) chains with different lengths and the chemical nature of the main chain, poly(allylamine) (PAH) or poly(L-lysine) (PLL). It was found out that the adsorption kinetics of the polymers showed a complex behavior. The total adsorbed amount depends on the architecture of the polymer chains (length of the PEG chains), on the polymer concentration and on the chemical nature of the main chain. The comparison of the thicknesses of the adsorbed layers obtained from D-QCM and from ellipsometry allowed calculation of the water content of the layers that is intimately related to the grafting length. The analysis of D-QCM results also provides information about the shear modulus of the layers, whose values have been found to be typical of a rubber-like polymer system. It is shown that the adsorption of polymers with a charged backbone is not driven exclusively by the electrostatic interactions, but the entropic contributions as a result of the trapping of water in the layer structure are of fundamental importance.     

Layer‐by‐layer assembly of weak‐strong copolymer polyelectrolytes: A route to morphological control of thin films

Multilayer films were assembled from a strong polyelectrolyte (poly(diallyldimethylammonium chloride), PDADMAC) and a copolymer containing both strongly charged styrene sulfonate moieties and weakly charged maleic acid moieties (poly(4‐styrenesulfonic acid‐co‐maleic acid), PSSMA). Growth of PSSMA/PDADMAC multilayers was linear, as characterized by UV‐vis spectroscopy and quartz crystal microgravimetry. The influence of both the pH of the PSSMA adsorption solutions and the ratio of SS:MA in the PSSMA on multilayer properties was investigated. Fourier transform infrared spectroscopy results showed that the ionization of carboxylic acid groups in PSSMA/PDADMAC multilayers did not vary significantly with changes in the PSSMA assembly pH. However, the multilayers showed different thicknesses, surface morphologies, and stability to post‐assembly pH treatment. We also demonstrate that PSSMA/PDADMAC multilayers are significantly more stable than PSSMA/PAH multilayers after post‐assembly pH treatment (i.e. the films remain intact when exposed to pH extremes). In addition, the surface morphology of two films (PSSMA 1:1 assembled at pH 5.8, post‐treated at pH 2 and PSSMA 3:1 assembled at pH 5.8, post‐treated at pH 11) changed significantly when the films were exposed to solutions of different pH and, in the former case, this change in film morphology was reversible. The porous morphology after treatment at pH 2 could be reversed to give a significantly smoother film after subsequent exposure to water for 24 h. Our results demonstrate that by the rational choice of the assembly pH of PSSMA, stable and pH‐responsive films can be obtained via the sequential assembly of PSSMA and PDADMAC. These films have potential in controlled release applications where film stability and pH‐responsive behavior are essential. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4341‐4351, 2007     

Multilayers of charged polypeptides as studied by in situ ellipsometry and quartz crystal microbalance with dissipation

The buildup of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on silica and titanium surfaces, with and without an initial layer of polyethyleneimine (PEI), was investigated and characterized by means of in situ ellipsometry and quartz crystal microbalance with dissipation. A two-regime buildup was found in all systems, where the length of the first slow-growing regime is dependent on the structure of the initial layers. In the second fast-growing regime, the film thickness grows linearly while the mass increases more than linearly (close to exponentially) with the number of deposited layers. The film refractive indices as well as the water contents indicate that the film density changes as the multilayer film builds up. The change in film density was proposed to be due to polypeptides diffusing into the multilayer film as they attach. Furthermore, the use of PEI as the initial layer was found to induce a difference in the thickness increments for PGA and PLL.     

Interaction and adhesion properties of polyelectrolyte multilayers

The growth, morphology, and interaction/adhesion properties of supported poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) and DNA/PAH multilayers were investigated by means of surface plasmon resonance spectroscopy, atomic force microscope (AFM) imaging, and AFM-related force measurements. Multilayers were assembled on a prelayer of poly(ethylenimine) (PEI) both with and without drying. SPR results showed a linear growth of the assembly in the case of PSS/PAH multilayers and nonlinear growth for DNA/PAH multilayers. Measurements of forces acting between a bare glass sphere and a multilayer-coated surface indicated repulsive or attractive forces, depending on surface charge, which suggests that, on approach, electrostatic forces dominate. On separation, we observed large pull-off forces in the case of positively charged multilayers and weak pull-off forces in the case negatively charged multilayers. Multiple adhesions and plateau regions observed on separation were interpreted in terms of a bridging of multiple polymer chains between the glass particle and the multilayer and a stretching of the polyelectrolyte loops. The dependence of the pull-off force on the number of deposited layers shows regular oscillations.     

Modeling the growth processes of polyelectrolyte multilayers using a quartz crystal resonator

The layer-by-layer buildup of chitosan/hyaluronan (CH/HA) and poly(l-lysine)/hyaluronan (PLL/HA) multilayers was followed on a quartz crystal resonator (QCR) in different ionic strengths and at different temperatures. These polyelectrolytes were chosen to demonstrate the method whereby useful information is retrieved from acoustically thick polymer layers during their buildup. Surface acoustic impedance recorded in these measurements gives a single or double spiral when plotted in the complex plane. The shape of this spiral depends on the viscoelasticity of the layer material and regularity of the growth process. The polymer layer is assumed to consist of one or two zones. A mathematical model was devised to represent the separation of the layer to two zones with different viscoelastic properties. Viscoelastic quantities of the layer material and the mode and parameters of the growth process were acquired by fitting a spiral to the experimental data. In all the cases the growth process was mainly exponential as a function of deposition cycles, the growth exponent being between 0.250 and 0.275.     

Poly(L‐lysine)‐Induced Aggregation of Single‐Strand Oligo‐DNA‐Modified Gold Nanoparticles

Single‐strand oligo‐DNA‐modified Au nanoparticles (AuNPs) undergo aggregation in the presence of poly(L ‐lysine) (PLL), which is attributed to the interactions between the oligo‐DNA and PLL. These interactions between the oligo‐DNA and PLL were identified to be electrostatic when the lysine residues of PLL were positively charged and to be hydrogen bonding when the residues were deprotonated. The aggregation was promoted with an increase in the pH value at a pH level lower than the pK_a value of PLL (pK_a≈10.0) due to the gradual deprotonation of the lysine residues and thus suppressed electrostatic interactions between the positively charged lysine residues of PLL and the negatively charged backbone phosphate groups of the oligo‐DNA. At pH levels higher than the pK_a value of PLL, the aggregation was identified to be dominated by the hydrogen bonds between the bases of the oligo‐DNA and the deprotonated lysine residues of PLL. This study prompts the possibility that the spectral, and thus color, change of AuNPs upon aggregation can be used as a probe to follow the interactions between oligo‐DNA and polypeptides.     

Layer‐by‐Layer Assembly for Surface Tethering of Thin‐Hydrogel Films: Design Strategies and Applications

Manipulation and engineering of the surfaces has a key role in improving the materials properties. Anchoring of thin hydrogels on the materials surface is one of the recently developed methods to achieve surfaces with high potential applications. Layer‐by‐layer (LBL) has been used widely as a strong strategy for immobilization of thin hydrogel films on the surface of various organic/inorganic substrates. Electrostatic LBL and covalent LBL are two main strategies used in this regard. In electrostatic LBL, negatively and positively hydrophilic polymers are sequentially assembled to create a multilayer hydrogel which subsequent covalent crosslinking of multilayers improved the stability of the inserted layers. On the other hand, covalent LBL requires hydrophilic polymers bearing reactive telechelic groups. These reactive polymers are prepared by various polymerization techniques or by post‐functionalization of biopolymers. The principles of hydrogel anchoring have described along with representative examples. Besides, the potential applications of the modified surfaces in specific cases have been addressed and overviewed.     

Synthesis and solution properties of poly(methacrylate)s with semipolar structures on the side chains

Poly{2‐(N,N‐dimethylamino)ethyl methacrylate [poly(DMMA)]}, which was prepared by radical polymerization initiated with dimethyl 2,2‐azobis(2‐methylpropionate), was reacted with hydrogen peroxide, diethyl sulfate, and chloroacetic acid to yield poly[N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)amine N‐oxide] [poly(DMANO)], poly[N‐ethyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)ammonium ethyl sulfate] [poly(EDMES)], and poly[N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonioacetate] [poly(DMEAA)] as ion‐containing water‐soluble polymers, respectively. The solution properties of these charged polymers were compared via the reduced viscosities of these three charged polymers in aqueous solutions as a function of the concentration. Poly(EDMES) showed typical polyelectrolyte behavior, and the other two polymers [poly(DMANO) and poly(DMEAA)] exhibited antipolyelectrolyte behavior. Furthermore, the antipolyelectrolyte behavior was different for poly(DMANO) and poly(DMEAA); that is, poly(DMANO) was less dependent on small electrolytes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 129–141, 2005     

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells

Surface modification of poly(ethylene terephthalate) (PET) film was performed by surface hydrolysis and layer-by-layer (LBL) assembly followed a mechanism of electrostatic adsorption of oppositely charged polymers, exemplified with chitosan and chondroitin sulfate (CS). Hydrolysis of PET in concentrated alkaline solution produced a carboxyl-enriched surface. The changes of weight loss and surface chemistry, morphology and wettability were monitored and verified by UV-vis spectroscopy, atomic force microscopy (AFM) and water contact angle. Assembly of positively charged chitosan and negatively charged CS was then conducted in a LBL manner to create multilayers on the hydrolyzed PET film. The process of layer growth and oscillation of surface wettability were monitored by UV-vis spectroscopy and water contact angle measurement, respectively. In vitro cell culture revealed that the adherence of endothelial cells was significantly enhanced on the biomacromolecules-modified PET film with preserved endothelial cell function, in particular on those assembled with larger number of chitosan/CS layers. However, with regard to cell proliferation and viability properties after cultured for 4 days, minor difference was determined between the modified and the unmodified PET films.