The formation mechanism of Mo-methylidene species over Mo/HBeta catalysts for heterogeneous olefin metathesis: A density functional theory study

Density Functional Theory (DFT) calculations were performed to optimize the Mo active sites in HBeta zeolite catalysts as well as to locate the reaction pathways to form the Mo-methylidene species. Two different Mo active sites, i.e., the oxidized Mo^VIO₂ and its reduced form Mo^VO(OH), were developed and incorporated into HBeta zeolites by replacing a pair of Brønsted acidic sites. The Mo-methylidene species were found to be produced through two elementary reaction steps, and the Mo-oxametallacyclobutanes were identified as the intermediates. The activation barriers of the decompositions of the oxametallacyclobutane intermediates (Step 2) were estimated to be higher than those of the ethene addition on the Mo active sites (Step 1). The oxidation states of the Mo centers exerted marked influences on the stabilities of the intermediates as well as on the activation barriers and reaction heats of Steps 1 and 2, which were elucidated by the electronic properties of the O_b-ligands directly bonded to the Mo centers. Both free energy barriers and reaction heats have indicated that the whole processes of generating the Mo-methylidene species were preferred over the Mo(VI) rather than Mo(V) active site. Accordingly, the Mo(VI) active site was more efficient in catalyzing the formation of Mo-methylidene species in the heterogeneous Mo/HBeta catalytic systems.     

Density functional theory study of the platinum-catalyzed cyclopropanation reaction with olefin

A computational study of the platinum-catalyzed cyclopropanation reaction with olefin is presented. The model system is formed by an ethylene molecule and the active catalytic species, which forms from a CH2 fragment and the Cl2Pt(PH3)2 complex. The results show that the active catalytic species is not a metal-carbene of the type (PH3)2Cl2Pt=CH2 but two carbenoid complexes which can exist in almost two degenerate forms, namely (PH3)2Pt(CH2Cl)Cl (carbenoid A) and (PH3)Pt(CH2PH3)Cl2 (carbenoid B). The reaction proceeds through three pathways: methylene transfer, carbometalation for carbenoid A, and the reaction of a monophosphinic species for carbenoids (A and B). The most favored reaction channel is methylene transfer pathway for (PH3)Pt(CH2PH3)Cl2 (carbenoid B) species with a barrier of 31.32 kcal/mol in gas phase. The effects of dichloromethane, THF, and benzene solvent are investigated with PCM method. For carbenoid A, both methylene transfer and carbometalation pathway barriers to reaction become remarkably lower with the increasing polarity of solvent (from 43.25 and 52.50 kcal/mol for no solvent to 25.36 and 38.53 kcal/mol in the presence of the dichloromethane). In contrast, the reaction barriers for carbenoid B via the methylene transfer path hoist 6.30 kcal/mol, whereas the barriers do not change significantly for the reaction path of a monophosphinic species for carbenoids (A and B).     

Understanding the dehydrogenation mechanism over iron nanoparticles catalysts based on density functional theory

The conversion of chemical feedstock materials into high value-added products accompanied with dehydrogenation is of great value in the chemical industry.However,the catalytic dehydrogenation reaction is inhibited by a limited number of expensive noble metal catalysts and lacks understanding of dehydrogenation mechanism.Here,we report the use of heterogeneous non-noble metal iron nanoparticles(NPs) incorporated mesoporous nitrogen-doped carbon to investigate the dehydrogenation mechanism based on experiment observation and density functional theory(DFT) method.Fe NPs catalyst displays excellent performance in the dehydrogenation of 1,2,3,4-tetrahydroquinoline(THQ)with 100% selectivity and 100% conversion for 10-12 h at room temperature.The calculated adsorption energy implies that THQ prefers to adsorb on Fe NPs as compared with absence of Fe NPs.What is more,the energy barrier of transition state is relatively low,illustrating the dehydrogenation is feasible.This work provides an atomic scale mechanism guidance for the catalytic dehydrogenation reaction and points out the direction for the design of new catalysts.     

Exploring odd-even effects of simple oligomer-like DRCNnT series: a study based on density functional theory/time-dependent density functional theory calculations

Odd-even effects of short-circuit current density and power conversion efficiency (PCE) are an interesting phenomenon in some organic solar cells. Although some explanations have been given, why they behave in such a way is still an open question. In the present work, we investigate a set of acceptor-donor-acceptor simple oligomer-like small molecules, named the DRCNnT (n = 5-9) series, to give an insight into this phenomenon because the solar cells based on them have high PCE (up to 10.08%) and show strong odd-even effects in experiments. By modeling the DRCNnT series and using density functional theory, we have studied the ground-state electronic structures of the DRCNnT (n = 5-9) series in condensed phase. The calculated results reproduce the experimental trends well. Furthermore, we find that the exciton-binding energies of the DRCNnT series may be one of the key parameters to explain this phenomenon because they also show odd-even effects. In addition, by studying the effects of alkyl branch and terminal group on odd-even effects of dipole moment, we find that eliminating one or two alkyl branches does not break the odd-even effects of dipole moments, but eliminating one or two terminal groups does. Finally, we conclude that removing one alkyl branch close to the terminal group of DRCN5T can decrease highest occupied molecular orbital (HOMO) energy (thus increasing open circuit voltage) and increase dipole moment (thus enhancing charge separation and short-circuit current). This could be a new and simple method to increase the PCE of DRCN5T-based solar cells.     

The surprisingly beneficial effect of soft donors on the performance of early transition metal olefin polymerisation catalysts

Group 4 metal complexes containing phenoxy-amide ligands bearing soft pendant donors are shown to give more highly active ethylene polymerisation catalysts than counterparts containing hard donors or systems without a pendant donor.     

Exploring the binding of serotonin to the 5-HT3 receptor by density functional theory

The 5-HT3 receptor is a typical ligand-gated ion channel of the Cys-loop superfamily, which is activated by binding of serotonin (5-HT). Models of the binding site of this protein reveal potential interactions between 5-HT and Tyr143, Tyr153, and Tyr234. Here we describe a series of ab initio calculations, based on density functional theory, to assess the effects of mutating these tyrosine residues on the binding of 5-HT. A series of mutations to these tyrosines, previously studied experimentally, were tested, and the binding energies compared with the available experimental data. Our results show that Tyr153 could form a hydrogen bond with the tertiary amine of 5-HT, and that mutation in this location revealed binding energies broadly in line with experimentally determined EC50s. Tyr143 could also form a hydrogen bond, but as EC50s do not relate to binding energies, it is unlikely that such a bond is formed here. Tyr234 is quite distinct in that it may interact with 5-HT via a mixed hydrogen bond/cation-pi interaction.     

Screening performance of methane activation over atomically dispersed metal catalysts on defective boron nitride monolayers:A density functional theory study

Methane(CH_4) controllable activation is the key process for CH_4 upgrading,which is sensitive to the surface oxygen species.The high thermal conductivity and superb thermal stability of the hexagonal boron nitride(h-BN) sheet makes a single transition metal atom doped hexagonal boron nitride monolayer(TM-BN) possible to be a promising material for catalyzing methane partial oxidation.The performances of 24 TM-BNs for CH_4 activation are systematically investigated during the CH_4 oxidation by means of first-principles computation.The calculation results unravel the periodic va riation trends for the stability of TM-BN,the adsorption strength and the kind of O_2 species,and the resulting CH_4 activation performance on TM-BNs.The formed peroxide O_2~(2-)of which the O-O bond could be broken and O-anions are found to be reactive oxygen species for CH_4 activation under the mild conditions.It is found that the redox potential of TM center,including its valence electron number,coordination environment,and the work function of TM-BN,is the underlying reason for the formation of different oxygen species and the resulting activity for CH_4 oxidative dehydrogenation.     

黄酮类化合物的密度泛函理论研究

在混合密度泛函B3LYP理论下,用6-31G*基函数研究了几种典型黄酮类化合物分子的几何结构、电子结构和分子的静电势,讨论了电子结构和分子活性部位的关系.     

Modulating the reactivity of Ni-containing Pt(111)-skin catalysts by density functional theory calculations

We present here a first principles density functional theory investigation of the reactivity of Pt(111)-skin catalysts, which are varied from surface alloys with Ni to bulk PtxNi 1-x (x=0.25,0.50,0.75) alloys. Molecule (CO, O, and H) adsorption and oxidation of CO+O and H+O reactions were studied and analyzed in detail. Independent of the adsorbates, the interaction between adsorbates and substrates becomes weakened with increase in Ni, due to the downshift of d-band center of surface Pt atoms. Moreover, activation barriers of CO and H oxidation toward atomic oxygen gradually decrease. In term of CO preferential oxidation (PROX) in excess of hydrogen, it turns out that the overall reactivity and selectivity rely on the optimum of various elementary steps involved such as competitive molecular (dissociative) adsorption and oxidation reaction. The present calculations show that Pt3Ni(111) with Pt overlayer is an optimum catalyst for CO PROX in excess of hydrogen.     

Mechanistic aspects of the olefin polymerization with metallocene catalysts

With C₁-, C₂- or C_s-symmetric metallocenes, different intermediates and types of copolymers can be obtained from randomly distributed to alternating structures. Substitution of the Cp-ring in [Me₂C-(tert-Bu Cp)(Flu)]ZrCl₂ yields ethene/norbornene copolymers with an alternating structure, because the rigid norbornene can only be inserted from the open side of the metallocene. By variation of the polymerization parameters, copolymers with glass transition temperatures above 180°C and molecular weights > 100 000 are synthesized. By supporting different metallocenes on a silica/methylaluminoxane (MAO) carrier the deactivation reaction under electron and hydrogen transfer can be suppressed. This is proved for different Al/Zr ratios when trimethylaluminum (TMA) is used as cocatalyst by the lack of methane evolution by metallocenes and by near independence of the polymerization activity on the prereaction time, after reaching maximum activity. Aluminumalkyls and MAO leach Cp₂ZrCl₂ from the carrier, the leached metallocene is only active in polymerization by adding MAO.     

Orbital-corrected orbital-free density functional theory

A new implementation of density functional theory (DFT), namely orbital-corrected orbital-free (OO) DFT, has been developed. With at most two non-self-consistent iterations, OO-DFT accomplishes the accuracy comparable to fully self-consistent Kohn-Sham DFT as demonstrated by its application on the cubic-diamond Si and the face-centered-cubic Ag systems. Our work provides a new impetus to further improve orbital-free DFT method and presents a robust means to significantly lower the cost associated with general applications of linear-scaling Kohn-Sham DFT methods on large systems of thousands of atoms within different chemical bonding environment.     

Pseudospectral time-dependent density functional theory

Time-dependent density functional theory (TDDFT) is implemented within the Tamm-Dancoff approximation (TDA) using a pseudospectral approach to evaluate two-electron repulsion integrals. The pseudospectral approximation uses a split representation with both spectral basis functions and a physical space grid to achieve a reduction in the scaling behavior of electronic structure methods. We demonstrate here that exceptionally sparse grids may be used in the excitation energy calculation, following earlier work employing the pseudospectral approximation for determining correlation energies in wavefunction-based methods with similar conclusions. The pseudospectral TDA-TDDFT method is shown to be up to ten times faster than a conventional algorithm for hybrid functionals without sacrificing chemical accuracy.     

Perspective on density functional theory

Density functional theory (DFT) is an incredible success story. The low computational cost, combined with useful (but not yet chemical) accuracy, has made DFT a standard technique in most branches of chemistry and materials science. Electronic structure problems in a dazzling variety of fields are currently being tackled. However, DFT has many limitations in its present form: too many approximations, failures for strongly correlated systems, too slow for liquids, etc. This perspective reviews some recent progress and ongoing challenges.