Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

High dielectric performance of tactic polynorbornene derivatives synthesized by ring‐opening metathesis polymerization

Functional polynorbornenes (PNBEs) containing pyrrolidine moiety and bis(trifluoromethyl)biphenyl side group were synthesized via ring‐opening metathesis polymerization (ROMP), and the microstructure of polymer chain was characterized by NMR spectroscopy. Poly(N‐3,5‐bis(trifluoromethyl)biphenyl‐norbornene‐pyrrolidine) (PTNP) and poly(N‐phenyl‐norbornene‐pyrrolidine) (PPNP) are supposed to have practically trans double bonds and adopt isotactic syn conformation, whereas poly(N‐3,5‐bis(trifluoromethyl)biphenyl‐norbornene‐dicarboximide) (PTNDI) has both trans and cis double bonds and atactic microstructure. PTNP, PTNDI, and PPNP have much different dielectric constants of 20, 7, and 3, respectively, which is attributed to both the polar 3,5‐bis(trifluoromethyl)biphenyl group and the stereoregular chain structure. The existence of rigid pyrrolidine moiety has a positive contribution to form the tactic polymer chain during ROMP. Polymers are highly thermal stable up to ～300 °C. Having good dielectric properties and thermal stability, these functional PNBEs are expected as the potential dielectric material in thin film capacitors. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Optical and dielectric properties of new azobenzene copolyethers embedded in polymer matrices

A new group of photochromic azobenzene copolyethers was synthesized. Their photochomic and dielectric properties were studied in poly(vinyl alcohol) and poly(methyl methacrylate) matrices.     

Vinyl addition polymerization of norbornene with cationic (allyl)Ni catalysts: Mechanistic insights and characterization of first insertion products

Several cationic (allyl)Ni(II) complexes were synthesized and shown to be highly active for (2,3)‐vinyl addition polymerization of norbornene to yield polymers with low molecular weight distributions (MWDs) ranging from 1.4–1.9. In all cases slow initiation was followed by rapid propagation which prevents molecular weight control of the poly(norbornene). One of the intermediates in the polymerization process has been identified and characterized by NMR spectroscopy as the first insertion product resulting from the insertion of norbornene into the Ni? C allyl bond in cis‐exo fashion. This insertion product was synthesized independently and NMR studies showed that the first insertion of norbornene into the Ni? C allyl bond is a reversible process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2560–2573, 2009     

Dielectric properties of oligomers. VI. End-group effects in vinyl acetate and methyl methacrylate oligomers

Dielectric properties of vinyl acetate and methyl methacrylate oligomers having chemically different end groups were compared. Dielectric measurements were carried out over the frequency range between 23 and 3 MHz and the temperature range between +50 and ?50°C. The static dielectric constants of these oligomers are between 10 and 20. The relaxations were analyzed with the Havriliak–Negami equation. The dielectric properties depend on the chain end groups on the oligomers. The distribution of relaxation times of the vinyl acetate oligomers was wider than that of poly(vinyl acetate). It was concluded that two cooperative motions, that of the principal chain and that of the chain and that of the chain end group, take part in the dielectric relaxation of these short chain molecules.     

Ethylene‐Norbornene Terpolymerization with 5‐Vinyl‐2‐norbornene Using Single‐Site Catalysts

The incorporation of 5‐vinyl‐2‐norbornene (VNB) into ethylene‐norbornene copolymer was investigated with catalysts [Ph₂C(Fluo)(Cp)]ZrCl₂ ( 1 ), rac‐[Et(Ind)₂]ZrCl₂ ( 2 ), and [Me₂Si(Me₄Cp)^tBuN]TiCl₂ ( 3 ) in the presence of MAO by terpolymerizing different amounts of 5‐vinyl‐2‐norbornene with constant amounts of ethylene and norbornene at 60°C. The highest cycloolefin incorporations and highest activity in terpolymerizations were achieved with 1 . The distribution of the monomers in the terpolymer chain was determined by NMR spectroscopy. As confirmed by XRD and DSC analysis, catalysts 1 and 3 produced amorphous terpolymer, whereas 2 yielded terpolymer with crystalline fragments of long ethylene sequences. When compared with poly‐(ethylene‐co‐norbornene), VNB increased both the glass transition temperatures and molar masses of terpolymers produced with the constrained geometry catalyst whereas decreased those for the metallocenes.     

Growth and structure of surface-initiated poly(n-alkylnorbornene) films

We report the surface-initiated growth of poly(alkylnorbornene) films via ring-opening metathesis polymerization (ROMP). The films are grown by exposure of a vinyl-terminated self-assembled monolayer (SAM) on gold to Grubbs first-generation catalyst and the subsequent exposure to an alkylnorbornene monomer. We investigate the influence of alkyl side chains on the structure, barrier, surface properties, and the growth kinetics of surface-initiated ROMP-type poly(norbornene) films. Rate constants for film growth are estimated for the comparison of monomer reactivity. The rate constant for film growth decreases by 3 orders of magnitude from norbornene to decylnorbornene, indicating a strong effect of chain length on initiation and/or propagation rates. Reflectance-absorption infrared spectroscopy is used to show the molecular level packing within the poly(alkylnorbornene) films is disrupted by the alkyl side chains. Tapping-mode atomic force microscopy is used to show that norbornene, butylnorbornene, and hexylnorbornene polymerize from the surface to form dense coatings, whereas decylnorbornene polymerizes to form isolated polymer clusters. The methyl terminus of the alkyl side chains increases the hydrophobicity of the poly(alkylnorbornene) films (thetaA(H2O) = 109-114 degrees) beyond that of a typical poly(norbornene) film (thetaA(H2O) approximately 106 degrees). The additional hydrophobicity throughout the film correlates with superior resistances against redox probes (Rf approximately 105 Omega.cm2) for poly(hexylnorbornene) when compared to polynorbornene (Rf approximately 104 Omega.cm2). The resistance of the poly(decylnorbornene) film (Rf approximately 102 Omega.cm2) is consistent with its nonuniform, cluster-like morphology.     

Synthesis of a norbornene monomer having cyclic carbonate moiety based on CO2 fixation and its transition metal‐catalyzed polymerizations

A norbornene monomer bearing cyclic carbonate moiety ( NB‐CC ) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon dioxide under atmospheric pressure, which was efficiently catalyzed by lithium bromide. NB‐CC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene), of which side chain inherited the cyclic carbonate moiety from the monomer without any deterioration. The same ROMP system was applicable to the copolymerization of NB‐CC and 5‐butyl‐2‐norbornene ( BNB ), which afforded the corresponding copolymer with a composition ratio same as a feed ratio. In addition, by using a catalytic system consisted of palladium (II) acetate/tricyclohexylphosphine/triphenylcarbenium tetrakis(pentafluorophenyl)borate, the copolymerization of NB‐CC and BNC proceeded successfully in a vinyl addition polymerization mode to give the corresponding poly(norbornene) having CC moiety in the side chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3896–3902, 2010     

Effects of plasticizers on novel electromechanical actuations with different poly(vinyl chloride) gels

Four different plasticizers were applied to make different poly(vinyl chloride) (PVC) gels, poly(vinyl chloride)‐bis(2‐ethylhexyl)phthalate (PVC‐DOP), poly(vinyl chloride)‐di‐n‐butylphthalate, poly(vinyl chloride)‐bis(2‐ethylhexyl)adipate, and poly(vinyl chloride)‐tris(2‐ethylhexyl)trimellitate. In our previous work, we reported that PVC‐DOP gel exhibits novel and reversible deformations of creeping and jointlike bending induced by direct current electric fields. In this article, we scrutinize the effects of plasticizers on electromechanical actuations, that is, reversible creeping and bending actuation with four of the different aforementioned gels. We measured the relative creeping distance, creeping area, creeping velocity, current observed, and bending angle as a function of applied electric fields for different PVC gels and found significant differences among them. To explain these variations, we compared the utility of plasticizers on the basis of the properties of different PVC gels, such as plasticizer‐retention ability, bending modulus, elongation at break, and the dielectric constant. The mentioned properties of the PVC gels played vital roles on their electromechanical actuations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2119–2127, 2003     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Dielectric,ultrasonic and x-ray diffraction studies on poly(vinyl chloride)-chlororubber-20 blends

Poly(vinyl chloride)-chlororubber-20 blends have been studied for compatibility by dielectric, ultrasonic and X-ray diffraction techniques. It has been found by both ultrasonic and dielectric techniques that poly(vinyl chloride) forms compatible blends with chlororubber-20 over a wide range of composition. X-ray diffraction studies indicate polymer-polymer interaction and reduction in the crystallinity of poly(vinyl chloride) by the incorporation of chlororubber-20. These results agree with earlier observations and have been explained in terms of the molecular and morphological behaviour of the blends.     

Poly(vinyl methyl ether) hydrogels at temperatures below the freezing point of water—molecular interactions and states of water

Water interacting with a polymer reveals a number of properties very different to bulk water. These interactions lead to the redistribution of hydrogen bonds in water. It results in modification of thermodynamic properties of water and the molecular dynamics of water. That kind of water is particularly well observable at temperatures below the freezing point of water, when the bulk water crystallizes. In this work, we determine the amount of water bound to the polymer and of the so-called pre-melting water in poly(vinyl methyl ether) hydrogels with the use of Raman spectroscopy, dielectric spectroscopy, and calorimetry. This analysis allows us to compare various physical properties of the bulk and the pre-melting water. We also postulate the molecular mechanism responsible for the pre-melting of part of water in poly(vinyl methyl ether) hydrogels. We suggest that above ?60 °C, the first segmental motions of the polymer chain are activated, which trigger the process of the pre-melting.     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

聚卤乙烯单体性质及构型对链柔性和极性的影响

基于旋转异构态模型和生成矩阵统计方法,推导了极性取代基高分子链均方回转半径和均方偶极矩改进的计算公式,应用于研究聚卤乙烯链构象和构型依赖的性质,包括均方回转半径和偶极矩特征比与构象能、链规整程度和温度的关系.发现构型规整的聚卤乙烯链特征比、温度系数和构象能依赖性质均呈现较大的差异,尤其是间同和全同构型链.如聚卤乙烯间同链偶极矩特征比随主要相互作用Eη变化比例在-0.62～0.05(J/mol)-1之间.相反,构型不规整的聚卤乙烯链的无扰尺寸则比较接近.聚氟乙烯、聚氯乙烯和聚溴乙烯无规链均方偶极矩特征比分别为0.80、0.69和0.59,均方偶极矩温度系数为-0.07×10-3～-0.53×10-3 K-1,与实验结果符合.研究结果表明聚卤乙烯单体性质和构型对其链柔性和链极性的影响是显著的.     

General properties of secondary relaxations in polymers as determined by the thermally stimulated current method

The method of thermally stimulated current (TSC) has been used to study the low-temperature dielectric β relaxations of several polymers including especially poly(vinyl chloride), poly(vinyl acetate), polyamide 6, 6,6,poly(t-butyl acrylate), poly(methyl methacrylate), poly(ethyl methacrylate), poly(phenyl methacrylate), and poly(t-butyl methacrylate). The distribution characteristics of the relaxation processes have been determined from the corresponding TSC peaks by a fractional polarization technique which consists of applying the electric field in several discrete steps during a slow cooling. Several common features have been found in all the polymers investigated: the β peaks are characterized by a distribution of relaxation times resulting from a distribution in activation energy and this distribution is quasisymmetrical and continuous. These facts are in agreement with the hypothesis of a relaxation involving local motions of small polar groups undergoing various interactions with the environment. Some discrepancy remains, however, between our calculated values of the mean activation energy and those obtained from the dielectric loss.     

Permeation and sorption in polynorbornenes with organosilicon substituents

Gas sorption properties, permeability coefficients, and diffusion coefficients of a series of norbornene polymers are presented. Introduction of the Si(CH₃)₃ group into the polynorbornene (PNB) backbone chain results in significant increases in glass transition temperature, permeability, and diffusion coefficient for a number of gases (H₂, O₂, N₂, CO₂, CH₄, C₂H₆). The transport properties and sorption isotherms for poly(5-trimethylsilyl norbornene) (PTMSNB) are very similar to those for poly(vinyltrimethyl silane) (PVTMS), which contains the same side-chain group but differs from PTMSNB by the structure of its main chain. For another silicon-containing polymer poly[5-(1,1,3,3-tetramethyl-1,3-disilabutyl) norbornene] (PDSNB) having a bulkier side-chain group, the glass-transition temperature is decreased in comparison with that of PNB, presumably owing to self-plasticization. Both silicon-containing norbornene polymers (PTMSNB and PDSNB) have permeability coefficients for “rapid” gases like H₂ or CO₂ of about 10² Barrer. The high values of the Langmuir sorption capacity C′_H for PTMSNB and PVTMS, as well as the high diffusivity and mobility of spin probes in these polymers, were attributed to a large free volume related to the bulky Si(CH₃)₃ groups attached directly to the main chain. © 1993 John Wiley & Sons, Inc.     

Styrene 4‐vinylbenzocyclobutene copolymer for microelectronic applications

Styrene and 4‐vinylbenzocyclobutene (vinyl‐BCB) random copolymers were prepared by free radical polymerization and studied for suitability as a dielectric material for microelectronic applications. The percentage of vinyl‐BCB in the copolymer was varied from 0 to 26 mol % to optimize the physical and mechanical properties of the cured copolymer as well as the cost. Copolymer in which 22 mol % of vinyl‐BCB was incorporated along with styrene produced a thermoset polymer which, after cure, did not show a T_g before decomposition at about 350 °C. The polymeric material has a very low dielectric constant, dissipation factor, and water uptake. The fracture toughness of the copolymer was improved with the addition of 20 wt % of a star‐shaped polystyrene‐block‐polybutadiene. Blends of the poly(styrene‐co‐vinyl‐BCB) with the thermoplastic elastomer provided material that maintained high T_g of the cured copolymer with only a slight decrease in thermal stability. The crosslinked styrenic polymer and toughened blends possess many properties that are desirable for high frequency‐high speed mobile communication applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2799–2806, 2008     

后过渡金属催化降冰片烯加成聚合

综述了后过渡金属催化剂催化降冰片烯加成聚合的研究进展。主要介绍了Ni、Pd、Co三种金属催化剂各自的结构以及其催化降冰片烯聚合的特点,同时也阐述了Ni、Pd催化剂催化降冰片烯聚合的机理。     

Dynamics of water in partially crystallized polymer/water mixtures studied by dielectric spectroscopy

The dielectric relaxation process of water was investigated for polymer/water mixtures containing poly(vinyl methyl ether), poly(ethyleneimine), poly(vinyl alcohol), and poly(vinylpyrrolidone) with a polymer concentration of up to 40 wt % at frequencies between 10 MHz and 10 GHz in subzero temperatures down to -55 degrees C. These polymer/water mixtures have a crystallization temperature TC of water at -10 to -2 degrees C. Below TC, part of the water crystallized and another part of the water, uncrystallized water (UCW), remained in a liquid state with the polymer in an uncrystallized phase. The dielectric relaxation process of UCW was observed, and reliable dielectric relaxation parameters of UCW were obtained at temperatures of -26 to -2 degrees C. At TC, the relaxation strength, relaxation time, and relaxation time distribution change abruptly, and their subsequent changes with decreasing temperature are larger than those above TC. The relaxation strength of UCW decreases, and the relaxation time and dynamic heterogeneity (distribution of relaxation time) increase with decreasing temperature. These large temperature dependences below TC can be explained by the increase in polymer concentration in the uncrystallized phase C(p,UCP) with decreasing temperature. C(p,UCP) is independent of the initial polymer concentration. In contrast to the relaxation times above TC, which vary with the chemical structure of the polymer and its concentration, the relaxation times of UCW are independent of both of them. This indicates that the factor determining whether the water forms ice crystals or stays as UCW is the mobility of the water molecules.