Electronic structure of oligoaniline doped by inorganic and organic acids

The electronic structure of doped‐oligoaniline with various dopants is investigated by means of DFT method. After doping by hydrochloric acid (HCl) and camphorsulfonic acid (HCSA), the alternation of bond‐lengths is decreased and the co‐planarity of adjacent aromatic rings is increased. The π‐conjugating effect is increased in the electronic nature of Ph‐N system because the electrons can be delocalized along the backbone of oligoaniline where the hydrogen bonds as a bridge transfer the electrons. The electronic structure of polaron and bipolaron conformation and their relative stability is discussed, indicating that the preferable conformation is dependant on various dopants. The calculation results reveal that there is a relatively stronger interaction between the organic dopant of HCSA and N atoms of PANI, and more charge transfer between PANI and HCSA is a reason for the fact that the conductivity of HCSA‐doped PANI is higher than that of HCl‐doped PANI. The doping mechanism is proposed based on the calculation results. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Polyaniline doped with different sulfonic acids by in situ doping polymerization

Doped polyaniline (PANI) was synthesized by an “in situ doping polymerization” method in the presence of different sulfonic acids, such as methanesulfonic acid (MSA), p‐methylbenzene sulfonic acid (MBSA), β‐naphthalenesulfonic acid (β‐NSA), α‐naphthalenesulfonic acid (α‐NSA), 1,5‐naphthalenedisulfonic acid (1,5‐NSA), and 2,4‐dinitronaphol‐7‐sulfonate acid (NONSA). Morphology, solubility in m‐cresol, and electrical properties of the doped PANI were measured with the variation of the molecular structure of the selected sulfonic acids. Granular morphology was obtained when the sulfonic acids without a naphthalene ring, such as MSA and MBSA, were used. Regular tubular morphology was obtained only when β‐NSA was used. The tubular morphology can be modified by changing the substitutes, the number, and location of sulfo‐group(SOH) on the naphthalene ring. These results indicated that naphthalene ring in the selected sulfonic acids plays an important role in forming the tubular morphology of the doped PANI by the “in situ doping polymerization” method. All resulting PANI salts were soluble in m‐cresol, with the solubility depending on the molecular structure of the selected dopants. Room‐temperature conductivity for the doped PANI ranges from 10⁻¹ to 10⁰S/cm. Temperature dependence of conductivity shows a semiconductor behavior, and it can be expressed by one dimenson Variable Range Hopping (VRH) model. 1 © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1277–1284, 1999     

Structural effects of dopants and polymerization methodologies on the solid‐state ordering and morphology of polyaniline

The solid‐state three‐dimensional ordering of polyaniline–dopant complexes was investigated with four structurally different sulfonic acid dopants. The doped materials were produced in three different ways: polyaniline emeraldine base doped with sulfonic acid (aqueous route), in situ polymerization at the organic–water solvent interface (interfacial route), and in situ polymerization in organic and aqueous solvent mixtures (bilayer route). p‐Toluenesulfonic acid (PTSA), 5‐sulfosalicilic acid (SSA), camphorsulfonic acid (CSA), and dodecylbenzene sulfonic acid (DBSA) were employed as dopants. The conductivity of the aqueous‐route samples showed 10 and 100 times higher conductivity than the interfacial and bilayer routes, respectively. WXRD studies suggested that the crystallinity of the doped samples was dependent on both the structure of the dopants and the polymerization techniques. DBSA increases the polyaniline interplanar distance and produced highly crystalline materials via the aqueous and bilayer routes but failed with the interfacial route because of poor solubility in water. CSA, PTSA, and SSA produced highly crystalline samples by the interfacial route but failed with the aqueous (except for CSA) and bilayer routes. SEM analysis revealed that the doped materials of the interfacial route had excellent continuous morphology and uniform submicrometer‐size particle distributions in comparison with those of the aqueous and bilayer routes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1321–1331, 2005     

Electrical properties and EMI shielding behavior of highly thermally stable polyaniline/colloidal graphite composites

A hybrid approach has been adopted by using a combination of colloidal graphite (CG) as a conducting filler, 5‐lithium sulfoisophthalic (LiSIPA) acid as a dopant, and polyaniline (PANI) as a matrix to prepare LiSIPA doped PANI–CG composites. The thermal stability (～300°C) and electrical conductivity (67.4 S/cm at 17.4% CG content) have been improved significantly as compared to PANI doped with conventional inorganic dopants like HCl or H₂SO₄ (130–150°C). The maximum shielding effectiveness value was found to be ?39.7 dB. X‐ray diffraction and infrared spectroscopy showed a systematic shifting of the characteristic peaks and bands with increase in the amount of CG, which indicates significant interaction exists between CG and PANI. The UV–Vis spectra showed the characteristic bands of PANI, with a shift to shorter wavelength with increase in the CG content. The interaction mechanism between doped PANI and CG in the resultant composites has been proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

Microtubules of polyaniline doped with HCl and HBF4

Microtubules of polyaniline (PANI) doped with HCl, HBF₄, and β-naphthalene sulfonic acid (NSA) were synthesized by an improved in situ doping polymerization method. Ultraviolet-visible spectra, scanning electron microscopy, ESR, and X-ray diffraction characterized the molecular structure of the resulting PANI microtubules. These microtubules had a diameter of 1 ∼ 10 μm and a conductivity at room temperature of 0.2 ∼ 3.5 S/cm, depending on the molecular structure and concentration of the dopant. The degree of crystallinity of the PANI microtubules was enhanced by increasing the molecular size of the dopant; that is, the order PANI-NSA > PANI-HBF₄ > PANI-HCl was observed in the crystallinity of the microtubules. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4605–4609, 1999     

The role of molecular recognition in charge transport properties of doped polyaniline

Molecular recognition plays a significant role in the counterion-induced processibility, morphological features, and physical properties of doped polyaniline (PANI). The interaction of the counterion and solvent controls the chain conformation and, as a result, the formation of extended and localized electronic states; hence, it holds the key for tuning a wide range of electrical and optical properties of doped PANI. The combined effects of counterion, solvent, and processing conditions tune the metal-insulator transition, temperature dependence of conductivity, magnetoresistance, and so forth in doped PANI. The typical examples are shown in the case of PANI doped by camphor sulfonic acid, 2-acrylamido-2-methyl-1-propane sulfonic acid, and dodecylbenzoyl sulfonic acid.     

The effects of dopant acids on structure and properties of poly(o‐methoxyaniline)

Poly(o‐methoxyaniline) (POMA) was chemically synthesized using ammonium persulfate (APS) as oxidant. Methane sulfonic acid (MSA), hydrochloric acid (HCl), and p‐toluene sulfonic acid (pTSA) were used as dopants, under the same reaction conditions. For comparison, undoped POMA was also synthesized. The polymer samples were characterized by Fourier transform infrared spectroscopy (FTIR), four‐probe conductivity measurement, scanning electron microscopy (SEM), electron spin resonance (ESR), gel permeation chromatography (GPC), and determination of specific surface area. The antioxidant activities of POMA were assessed via reaction with 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) free radical, and the anti‐microbial activities were determined as minimum bactericidal concentrations against E. coli 25422 and S. aureus 6838. When doped with relatively strong acids, high yield (above 84%) was achieved, compared to the relatively low yield (45%) when no dopant was present. The conductivity decreased in the order POMA‐pTSA > POMA‐HCl > POMA‐MSA > undoped POMA. A polaron conduction mechanism was supported by FTIR and ESR spectra. The morphology of the polymers was found to be effectively controlled by dopants. All POMA polymers showed strong free radical scavenging ability, which was highly correlated with the specific surface areas of the polymer particles. All the tested samples showed activity against S. aureus 6838, but not at the concentrations tested against E. coli 25422. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

不同质子酸掺杂对银/聚苯胺纳米复合材料结构和导电性的影响

利用紫外光作为辅助条件,在反胶束体系中采用一步双原位法合成了硝酸(HNO3)、对甲基苯磺酸(TSA)和5-磺基水杨酸(SSA)掺杂的银/聚苯胺(Ag/PANI)纳米复合材料.通过对复合材料进行红外光谱(FTIR)、紫外光谱(UV-Vis)、扫描电镜(SEM)、X射线衍射(XRD)和导电性能的测试,研究了不同质子酸对Ag/PANI纳米复合材料结构、形貌和导电性能的影响.测试结果表明,3种酸掺杂制备的Ag/PANI纳米复合材料均为聚苯胺包覆银粒子的核-壳结构.不同的质子酸掺杂会对Ag/PANI纳米复合材料的电性能有重要影响.在3种酸掺杂的复合材料中,TSA掺杂的复合材料的电导率最佳,为215.14 S·cm-1.     

Synthesis and characterization of polypyrrole nanofibers with different dopants

Nanostructures of polypyrrole (PPy) were synthesized in the presence of different dopants including hydrochloric acid (HCl), ferric chloride (FeCl₃), p‐toluene sulfonic acid (p‐TSA), camphor sulfonic acid (CSA), and polystyrene sulfonic acid (PSSA), using a simple interfacial oxidative polymerization method. The method is a reliable non‐template approach with relatively simple instrumentation, ease of synthesis, and economic viability for synthesizing PPy nanostructures. Morphology of synthesized PPy structures was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which indicate the formation of one‐dimensional (1D) nanofibers with average diameter of 75–180 nm. Energy dispersive spectrum (EDS) of the PPy nanofibers indicates the attachment of the dopants to the PPy backbone; the fact is further confirmed by the Fourier transform infrared (FTIR) spectra of PPy nanostructures. Thermal stabilities of the nanostructures explored using thermal gravimetric analysis (TGA) follow the order PPy‐p‐TSA > CSA > HCl > FeCl₃ > PSSA. It is noticed that the electrical conductivity (EC) of PPy nanostructures depends upon the nature of dopant (PPy‐p‐TSA > CSA > HCl > FeCl₃ > PSSA), PPy‐p‐TSA nanofibers showing the highest EC of 6 × 10^?2 Scm^?1. Copyright © 2009 John Wiley & Sons, Ltd.     

二磺酸掺杂高热稳定性导电聚苯胺的合成及性能

以有机二磺酸作为掺杂剂合成了具有高热稳定性的二磺酸掺杂导电聚苯胺。研究了反应时间、温度、酸/苯胺摩尔比等因素对产率、产物的导电率与分子量的影响。利用微波加热的方法测试有机二磺酸掺杂聚苯胺的热稳定性能，结果表明：有机二磺酸掺杂的导电聚苯胺在微波场中升温速率快，并且具有良好的反复升温性能。     

不同磺酸掺杂聚苯胺的制备及在超级电容器中的应用

以MnO₂为氧化剂,采用乳液聚合法,用三种不同的磺酸型表面活性剂制备掺杂聚苯胺(PANI)。通过扫描电子显微镜(SEM)、傅里叶变换红外(FTIR)光谱以及X射线衍射(XRD)等手段对其结构及形貌进行表征;用所得的掺杂聚苯胺制作电极,组装成对称扣式超级电容器,用循环伏安法(CV)、电化学阻抗(EIS)和恒电流充放电技术进行电化学性能研究。结果表明,磺酸表面活性剂的引入有利于PANI纳米纤维的形成和分散,掺杂Nafion的PANI纤维直径在30-40 nm之间,纤维交织成多孔的疏松结构;当放电电流为0.1 A·g^-1时,以PANI-Nafion、PANI-SDS(十二烷基磺酸钠)、PANI-SDBS(十二烷基苯磺酸钠)为电极材料的超级电容器比容量分别为385.3、359.7、401.6 F·g^-1,均高于未掺杂PANI的比容量(235.8 F·g^-1);其中, PANINafion的循环稳定性最好, 1000次循环后其比容量保持率高达70.7%。     

Sonochemical synthetic methods to produce functionalized conducting copolymers

Polyaniline (PANI) is one of the most investigated intrinsically conducting polymers. Copolymerization of aniline with aniline derivatives was considered one of the most effective and promising ways of improving the properties of PANI. In this work, firstly ethyl 3‐aminobenzoate and butyl 3‐aminobenzoate were synthesized from 3‐aminobenzoic acid by direct esterification. Then the copolymerization of 3‐amino benzoic acid, ethyl 3‐aminobenzoate, and butyl 3‐aminobenzoate with aniline was carried out by sonochemical polymerization in aqueous hydrochloric acid using ammonium persulfate (APS) as an initiator. The effects of variation in the molar ratio of the two monomers on chain structure, conductivity, and the redox properties of the copolymer are discussed. The prepared polymers are characterized by ¹H NMR spectroscopy, X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT‐IR). Thermal behavior of the prepared copolymers was studied by differential scanning calorimetry. The copolymers were doped with HCl and their conductivity was measured. Copyright © 2009 John Wiley & Sons, Ltd.     

Syntheses of conductive adhesives based on epoxy resin and polyanilines by using N‐tert‐butyl‐5‐methylisoxazolium perchlorate as a thermally latent curing reagent

Conductive composites consisted of epoxy resin and polyanilines (PANIs) doped with dodecylbenzenesulfonic acid ( 1 ), dodecylsulfonic acid (2), di(2‐ethylhexyl)sulfosuccinic acid (3), and HCl were synthesized by use of N‐tert‐butyl‐5‐methylisoxazolium perchlorate (5) under various reaction conditions. It was found that the composites with PANI doped with acid 2 (PANI‐2) prepared by curing with 10 mol % of reagent 5 at 80 °C for 12 h showed high electroconductivity along with the low conducting percolation threshold (3 wt % of PANI‐2). Furthermore, the composite with even ?10 wt % of PANI‐2 exhibited ?10^?1 S/cm of electroconductivity. The UV–vis and IR measurements indicated that the conductive emeraldine salt form of PANI‐2 in the composite was maintained after the curing reaction. The thermal stability was studied by TGA and DSC measurements, and then, the T_d10 and T_g of the composite with 5 and 10 wt % of PANI‐2 were found to be similar to those with the cured epoxy resin itself. In addition, the similar investigation with an oxetane resin instead of the epoxy resin was also carried out. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 718–726, 2006     

Synthesis,characterization, and morphology of p‐toluene sulfonic acid‐doped polyaniline: A material for humidity sensing application

Polyaniline (PANI) doped with p‐toluene sulfonic acid was synthesized by chemical polymerization method using (NH₄)₂S₂O₈ as an oxidizing agent. This is a single step polymerization process for the direct synthesis of the conducting emeraldine salt (ES) phase, without the need of doping, dedoping, and redoping of the polymer. Presence of a free carrier tail at higher wavelength, characteristic of extended coil conformation along with a sharp polaronic peak is observed in the UV–vis spectrum of doped PANI in m‐cresol solvent. FT‐IR studies show the characteristic peaks of ES phase along with a sharp peak at 1120 cm^?1 representing vibration band of the dopant ion. Clumps of small fibers resulting in a sponge‐like structure was observed under scanning electron microscope. Thermal studies revealed a three‐step decomposition pattern. Conductivity is found to increase with an increase in the temperature showing “thermal activation behavior.” Decrease in resistance with increasing humidity is observed in a broad range of humidity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2161–2169, 2005     

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Camphor‐10‐sulfonic acid (HCSA) doped polyaniline (PANI)/poly(ethylene oxide) (PEO) composite nanofibers with different compositions (12 to 52 wt.% of PANI) were synthesized by an electrospinning method and their properties including optical, electrical and sensing were systematically investigated. FT‐IR shows that an increase of IR absorbance ratios of aromatic C? C stretching vibration of benzenoid rings of PANI to C? O? C symmetric vibrational modes of PEO confirmed that the PANI content in nanofiber mats increased proportionally with increase in PANI content in electrospinning solution. The band gap of PANI was determined to be 2.5 eV using UV‐Vis spectroscopy. The electrical conductivities of the nanofibers increased with an increase in the PANI content in the nanofibers. Additionally, the sensitivity toward NH₃ increased as the PANI content increased, but branched nanofibers reduced sensing response. The humidity sensitivity changed from positive to negative as the PANI content increased. The electron transport mechanism was studied by measuring the temperature dependence electrical resistivity. The negative temperature coefficient of resistance revealed a semiconducting behavior for the PANI/PEO nanofibers. The activation energy, calculated by Arrhenius plot, increased as the PANI content decreased. The power law indicated that electrons were being transported in a three dimensional matrix, and the longer hopping distance required more hopping energy for electron transport.     

Synthesis of oxalate doped polyaniline and its corrosion protection performance

It is known that dopants present in polyaniline (PANI) play an important role in corrosion protection of mild steel since the dopant ions form a secondary layer with iron. Since oxalate ions form a stable iron oxalate layer on mild steel, a study has been made on the corrosion protection performance of steel by vinyl coating containing oxalate doped PANI in acid and neutral media. Electrochemical impedance spectroscopy (EIS) studies have shown that the oxalate doped PANI is able to protect mild steel in sodium chloride solution since the impedance values are maintained at 10¹⁰ Ω cm² even after 100 days of exposure.     

蒙脱土基氮掺杂多孔碳@聚苯胺复合材料的制备及电化学性能

分别在盐酸和樟脑磺酸-盐酸混酸溶液中,在蒙脱土基新型氮掺杂多孔碳表面原位聚合苯胺,以制备氮掺杂多孔碳@聚苯胺复合电极材料,采用红外光谱(FTIR)、X射线衍射(XRD)和扫描电子显微镜(SEM)表征复合材料的组成和形貌。 盐酸掺杂的复合材料呈短棒状形貌,樟脑磺酸-盐酸掺杂材料形貌呈颗粒状及交联片状,樟脑磺酸-盐酸掺杂的结晶性能优于盐酸掺杂。 电化学测试结果表明,樟脑磺酸-盐酸掺杂的复合材料在0.5 A/g电流密度下的质量比电容为412.5 F/g,比盐酸掺杂的(332.4 F/g)高24.1%,等效串联电阻(R_s)和电荷迁移电阻(R_ct)小;但盐酸掺杂的复合材料在大电流下电容保持率为81.4%,高于混酸掺杂的58.4%。     

One‐step preparation of solution processable conducting polyaniline by inverted emulsion polymerization using didecyl ester of 4‐sulfophthalic acid as multifunctional dopant

A new one‐step method of preparation of solution processable conductive polyaniline (PANI) is reported using didecyl ester of 4‐sulfophthalic acid (DESPA) as multifunctional material. It consists of inversed emulsion polymerization of aniline in water/chloroform mixture with benzoyl peroxide initiator, maleic acid (MA) as a codopant and DESPA as protonating agent, surfactant, and plasticizer. The resulting product combines reasonable conductivity (ca.0.03 S/cm) with solubility in common solvents such as tetrahydrofuran and chloroform. Elemental analysis together with spectroscopic studies show that the protonation level of emulsion polymerized PANI (0.47 per mer involving one ring and one nitrogen) is very close to that predicted for PANI in the oxidation state of emeraldine (0.5). MA is incorporated into the polymer matrix as a co‐dopant in the ratio 1:4 with respect to the DESPA dopant. PANI‐DESPA‐MA three components system shows a highly ordered, layer‐type supramolecular structure, in which planes of regularly π‐stacked PANI chains are separated by a double layer of dopants. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1051–1057, 2008     

Thermomechanical behaviors and dielectric properties of polyaniline‐doped para‐toluene sulfonic acid/epoxy resin composites

Composites based on conductive organic/inorganic fillers dispersed in insulating matrix have been widely investigated because of their widespread applications such as electromagnetic shielding, electrostatic discharge, and sensors. In this context, novel composite materials based on epoxy resin matrix charged with polyaniline (PANI)‐doped para‐toluene sulfonic acid were elaborated. Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscopy were used to check the structure and the morphology of the samples. Viscoelastic behavior and thermal stability of the composites were explored by dynamic mechanical thermal analysis and thermogravimetric analysis. It was shown that the PANI particles exhibited a partial crystalline structure and were homogeneously dispersed in epoxy matrix. Consequently, this structure affected the thermal stability and viscoelastic properties of the composites. Furthermore, the dielectric and electrical properties were investigated up to 1 MHz. Measurements of dielectric properties revealed that with loading fillers in matrix, the dielectric parameters increased to high values at low frequency then decreased at values around 40 and 32 of real and imaginary parts, respectively, at 1 MHz with 15% of PANI content. Copyright © 2011 John Wiley & Sons, Ltd.