The Strained Sesquiterpene β‐Caryophyllene as a Probe for the Solvent‐Assisted Epoxidation Mechanism

In our attempt to synthesize β‐caryophyllene oxide in food‐compatible conditions, we observed the uncatalyzed and highly selective epoxidation of β‐caryophyllene, a strained bicyclic sesquiterpene, in ethanol with aqueous H₂O₂ under radical‐suppressing conditions without the addition of a catalyst. The unusual reactivity of β‐caryophyllene allowed us to use it as a probe for the mechanism of the solvent‐assisted epoxidation in a wide range of organic solvents. A kinetic study was performed to investigate the epoxidation mechanism; an excellent correlation was found between the observed epoxidation rates in different solvents and the Abraham’s hydrogen bond formation parameters of these solvents. By means of computational analysis, it was found that the main role of the solvent consists of the stabilization of the elongated O?O bond of H₂O₂ in the transition state through hydrogen‐bond donation to the leaving OH moiety of H₂O₂. α‐Humulene was found to possess similar reactivity as β‐caryophyllene whereas isocaryophyllene—the unstrained isomer of β‐caryophyllene—was unreactive.     

Selective Propene Epoxidation on Immobilized Au6–10 Clusters: The Effect of Hydrogen and Water on Activity and Selectivity

Epoxidation made easy : Subnanometer gold clusters immobilized on amorphous alumina result in a highly active and selective catalyst for propene epoxidation. The highest selectivity is found for gas mixtures involving oxygen and water, thus avoiding the use of hydrogen. Ab initio DFT calculations are used to identify key reaction intermediates and reaction pathways. The results confirm the high catalyst activity owing to the formation of propene oxide metallacycles. Al green, Au yellow, O red, and C gray.

     

Dinuclear Ru–Aqua Complexes for Selective Epoxidation Catalysis Based on Supramolecular Substrate Orientation Effects

Ru–aqua complex {[Ru^II(trpy)(H₂O)]₂(μ‐pyr‐dc)}⁺ is a powerful epoxidation catalyst for a wide range of linear and cyclic alkenes. High turnover numbers (TNs), up to 17000, and turnover frequencies (TOF), up to 24120 h^?1 (6.7 s^?1), have been obtained using PhIO as oxidant. This species presents an outstanding stereospecificity for both cis and trans olefins towards the formation of their corresponding cis and trans epoxides. In addition, it shows different reactivity to cis and trans olefins due to a substrate orientation supramolecular effect transmitted by its ligand scaffold. This effect together with the impressive reaction rates are rationalized using electrochemical techniques and DFT calculations.     

On the Size Evolution of Monolayer‐Protected Gold Clusters during Ligand Place‐Exchange Reactions: The Effect of Solvents

Ligand place‐exchange (LPE) reactions are extensively applied for the post‐functionalization of monolayer‐protected gold clusters (MPCs) by using excessive incoming ligands to displace initial ones. However, the modified MPCs are often enlarged or degraded; this results in ill‐defined size‐dependent properties. The growth of MPCs essentially involves an unprotected surface that is subsequently has gold atoms added or is fused with other gold cores owing to collision. Reported herein is a guideline for the selection of solvents to suppress unwanted MPC growth. Favorable solvents are those with significant affinity to gold or with low solubility for desorbed ligands because these properties retard LPE reactions and minimize the time available for unprotected gold cores. This finding provides a general and convenient approach to regulate the size of functionalized MPCs.     

Activation of Hydrogen Peroxide by Ionic Liquids: Mechanistic Studies and Application in the Epoxidation of Olefins

Imidazolium‐based ionic liquids that contain perrhenate anions are very efficient reaction media for the epoxidation of olefins with H₂O₂ as an oxidant, thus affording cyclooctene in almost quantitative yields. The mechanism of this reaction does not follow the usual pathway through peroxo complexes, as is the case with long‐known molecular transition‐metal catalysts. By using in situ Raman, FTIR, and NMR spectroscopy and DFT calculations, we have shown that the formation of hydrogen bonds between the oxidant and perrhenate activates the oxidant, thereby leading to the transfer of an oxygen atom onto the olefin demonstrating the special features of an ionic liquid as a reaction environment. The influence of the imidazolium cation and the oxidant (aqueous H₂O₂, urea hydrogen peroxide, and tert‐butyl hydrogen peroxide) on the efficiency of the epoxidation of cis‐cyclooctene were examined. Other olefinic substrates were also used in this study and they exhibited good yields of the corresponding epoxides. This report shows the potential of using simple complexes or salts for the activation of hydrogen peroxide, owing to the interactions between the solvent medium and the active complex.     

A Computational Study of the Olefin Epoxidation Mechanism Catalyzed by Cyclopentadienyloxidomolybdenum(VI) Complexes

A DFT analysis of the epoxidation of C₂H₄ by H₂O₂ and MeOOH (as models of tert‐butylhydroperoxide, TBHP) catalyzed by [Cp*MoO₂Cl] ( 1 ) in CHCl₃ and by [Cp*MoO₂(H₂O)]⁺ in water is presented (Cp*=pentamethylcyclopentadienyl). The calculations were performed both in the gas phase and in solution with the use of the conductor‐like polarizable continuum model (CPCM). A low‐energy pathway has been identified, which starts with the activation of ROOH (R=H or Me) to form a hydro/alkylperoxido derivative, [Cp*MoO(OH)(OOR)Cl] or [Cp*MoO(OH)(OOR)]⁺ with barriers of 24.9 (26.5) and 28.7 (29.2) kcal mol^?1 for H₂O₂ (MeOOH), respectively, in solution. The latter barrier, however, is reduced to only 1.0 (1.6) kcal mol^?1 when one additional water molecule is explicitly included in the calculations. The hydro/alkylperoxido ligand in these intermediates is η²‐coordinated, with a significant interaction between the Mo center and the O^β atom. The subsequent step is a nucleophilic attack of the ethylene molecule on the activated O^α atom, requiring 13.9 (17.8) and 16.1 (17.7) kcal mol^?1 in solution, respectively. The corresponding transformation, catalyzed by the peroxido complex [Cp*MoO(O₂)Cl] in CHCl₃, requires higher barriers for both steps (ROOH activation: 34.3 (35.2) kcal mol^?1; O atom transfer: 28.5 (30.3) kcal mol^?1), which is attributed to both greater steric crowding and to the greater electron density on the metal atom.     

Ligand Design for Site‐Selective Metal Coordination: Synthesis of Transition‐Metal Complexes with η6‐Coordination of the Central Ring of Anthracene

A polycyclic aromatic ligand for site‐selective metal coordination was designed by using DFT calculations. The computational prediction was confirmed by experiments: 2,3,6,7‐tetramethoxy‐9,10‐dimethylanthracene initially reacts with [(C₅H₅)Ru(MeCN)₃]BF₄ to give the kinetic product with a [(C₅H₅)Ru]⁺ fragment coordinated at the terminal ring, which is then transformed into the thermodynamic product with coordination through the central ring. These isomeric complexes have markedly different UV/Vis spectra, which was explained by analysis of the frontier orbitals. At the same time, the calculations suggest that electrostatic interactions are mainly responsible for the site selectivity of the coordination.     

Nanosheet‐Enhanced Enantioselectivity in the Vanadium‐Catalyzed Asymmetric Epoxidation of Allylic Alcohols

The use of suitable chiral ligands is an efficient means of producing highly enantioselective transition‐metal catalysts. Herein, we report a facile, economic, and effective strategy for the design of chiral ligands that demonstrate enhanced enantioselectivity and catalytic efficacy. Our simple strategy employs naturally occurring or synthetic inorganic nanosheets as huge and rigid planar substituents for, but not limited to, naturally available α‐amino‐acid ligands; these ligands were successfully used in the vanadium‐catalyzed asymmetric epoxidation of allylic alcohols. The crucial role of the inorganic nanosheets as planar substituents in improving the enantioselectivity of the reaction was clearly revealed by relating the observed enantiomeric excess with the distribution of the catalytic centers and the accessibility of the substrate molecules to the catalytic sites. DFT calculations indicated that the LDH layer improved the enantioselectivity by influencing the formation and stability of the catalytic transition states, both in terms of steric resistance and H‐bonding interactions.     

Magnetic Relaxation in Single‐Electron Single‐Ion Cerium(III) Magnets: Insights from Ab Initio Calculations

Detailed ab initio calculations were performed on two structurally different cerium(III) single‐molecule magnets (SMMs) to probe the origin of magnetic anisotropy and to understand the mechanism of magnetic relaxations. The complexes [Ce^III{Zn^II(L)}₂(MeOH)]BPh₄ ( 1 ) and [Li(dme)₃][Ce^III(cot′′)₂] ( 1 ; L=N,N,O,O‐tetradentate Schiff base ligand; 2 ; DME=dimethoxyethane, COT′′=1,4‐bis(trimethylsilyl)cyclooctatetraenyldianion), which are reported to be zero‐field and field‐induced SMMs with effective barrier heights of 21.2 and 30 K respectively, were chosen as examples. CASSCF+RASSI/SINGLE_ANISO calculations unequivocally suggest that m_J|±5/2〉 and |±1/2〉 are the ground states for complexes 1 and 2 , respectively. The origin of these differences is rooted back to the nature of the ligand field and the symmetry around the cerium(III) ions. Ab initio magnetisation blockade barriers constructed for complexes 1 and 2 expose a contrasting energy‐level pattern with significant quantum tunnelling of magnetisation between the ground state Kramers doublet in complex 2 . Calculations performed on several model complexes stress the need for a suitable ligand environment and high symmetry around the cerium(III) ions to obtain a large effective barrier.     

Univalent Gallium Complexes of Simple and ansa‐Arene Ligands: Effects on the Polymerization of Isobutylene

Using [Ga(C₆H₅F)₂]⁺[Al(OR^F)₄]^?( 1 ) (R^F=C(CF₃)₃) as starting material, we isolated bis‐ and tris‐η⁶‐coordinated gallium(I) arene complex salts of p‐xylene (1,4‐Me₂C₆H₄), hexamethylbenzene (C₆Me₆), diphenylethane (PhC₂H₄Ph), and m‐terphenyl (1,3‐Ph₂C₆H₄): [Ga(1,4‐Me₂C₆H₄)_2.5]⁺ ( 2⁺ ), [Ga(C₆Me₆)₂]⁺ ( 3⁺ ), [Ga(PhC₂H₄Ph)]⁺ ( 4⁺ ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺ ( 5²⁺ ). 4⁺ is the first structurally characterized ansa‐like bent sandwich chelate of univalent gallium and 5²⁺ the first binuclear gallium(I) complex without a Ga?Ga bond. Beyond confirming the structural findings by multinuclear NMR spectroscopic investigations and density functional calculations (RI‐BP86/SV(P) level), [Ga(PhC₂H₄Ph)]⁺[Al(OR^F)₄]^?( 4 ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺{[Al(OR^F)₄] ^?}₂ ( 5 ), featuring ansa‐arene ligands, were tested as catalysts for the synthesis of highly reactive polyisobutylene (HR‐PIB). In comparison to the recently published 1 and the [Ga(1,3,5‐Me₃C₆H₃)₂]⁺[Al(OR^F)₄]^? salt ( 6 ) (1,3,5‐Me₃C₆H₃=mesitylene), 4 and 5 gave slightly reduced reactivities. This allowed for favorably increased polymerization temperatures of up to +15 °C, while yielding HR‐PIB with high contents of terminal olefinic double bonds (α‐contents=84–93 %), low molecular weights (M_n=1000–3000 g mol^?1) and good monomer conversions (up to 83 % in two hours). While the chelate complexes delivered more favorable results than 1 and 6 , the reaction kinetics resembled and thus concurred with the recently proposed coordinative polymerization mechanism.     

A Density Functional Theory Investigation of the Cobalt‐Mediated η5‐Pentadienyl/Alkyne [5+2] Cycloaddition Reaction: Mechanistic Insight and Substituent Effects

Alkyl‐substituted η⁵‐pentadienyl half‐sandwich complexes of cobalt have been reported to undergo [5+2] cycloaddition reactions with alkynes to provide η²,η³‐cycloheptadienyl complexes under kinetic control. DFT studies have been used to elucidate the mechanism of the cyclization reaction as well as that of the subsequent isomerization to the final η⁵‐cycloheptadienyl product. The initial cyclization is a stepwise process of olefin decoordination/alkyne capture, C? C bond formation, olefin arm capture, and a second C? C bond formation; the initial decoordination/capture step is rate‐limiting. Once the η²,η³‐cycloheptadienyl complex has been formed, isomerization to η⁵‐cycloheptadienyl again involves several steps: olefin decoordination, β‐hydride elimination, reinsertion, and olefin coordination; also here the initial decoordination step is rate limiting. Substituents strongly affect the ease of reaction. Pentadienyl substituents in the 1‐ and 5‐positions assist pentadienyl opening and hence accelerate the reaction, while substituents at the 3‐position have a strongly retarding effect on the same step. Substituents at the alkyne (2‐butyne vs. ethyne) result in much faster isomerization due to easier olefin decoordination. Paths involving triplet states do not appear to be competitive.     

First‐Row Transition‐Metal–Diborane and –Borylene Complexes

A combined experimental and quantum chemical study of Group 7 borane, trimetallic triply bridged borylene and boride complexes has been undertaken. Treatment of [{Cp*CoCl}₂] (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with LiBH₄ ? thf at ?78 °C, followed by room‐temperature reaction with three equivalents of [Mn₂(CO)₁₀] yielded a manganese hexahydridodiborate compound [{(OC)₄Mn}(η⁶‐B₂H₆){Mn(CO)₃}₂(μ‐H)] ( 1 ) and a triply bridged borylene complex [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂MnH(CO)₃] ( 2 ). In a similar fashion, [Re₂(CO)₁₀] generated [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂ReH(CO)₃] ( 3 ) and [(μ₃‐BH)(Cp*Co)₂(μ‐CO)₂(μ‐H)Co(CO)₃] ( 4 ) in modest yields. In contrast, [Ru₃(CO)₁₂] under similar reaction conditions yielded a heterometallic semi‐interstitial boride cluster [(Cp*Co)(μ‐H)₃Ru₃(CO)₉B] ( 5 ). The solid‐state X‐ray structure of compound 1 shows a significantly shorter boron–boron bond length. The detailed spectroscopic data of 1 and the unusual structural and bonding features have been described. All the complexes have been characterized by using ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry, and X‐ray diffraction analysis. The DFT computations were used to shed light on the bonding and electronic structures of these new compounds. The study reveals a dominant B?H?Mn, a weak B?B?Mn interaction, and an enhanced B?B bonding in 1 .     

Automated Quantum Mechanical Predictions of Enantioselectivity in a Rhodium-Catalyzed Asymmetric Hydrogenation

A computational toolkit (AARON: An automated reaction optimizer for new catalysts) is described that automates the density functional theory (DFT) based screening of chiral ligands for transition-metal-catalyzed reactions with well-defined reaction mechanisms but multiple stereocontrolling transition states. This is demonstrated for the Rh-catalyzed asymmetric hydrogenation of (E)-β-aryl-N-acetyl enamides, for which a new C₂-symmetric phosphorus ligand is designed.     

Transition States of Binap–Rhodium(I)‐Catalyzed Asymmetric Hydrogenation: Theoretical Studies on the Origin of the Enantioselectivity

By using the hybrid IMOMM(B3LYP:MM3) method, we examined the binap–Rh^I‐catalyzed oxidative‐addition and insertion steps of the asymmetric hydrogenation of the enamide 2‐acetylamino‐3‐phenylacrylic acid. We report a path that is energetically more favorable for the major enantiomer than for the minor enantiomer. This path follows the “lock‐and‐key” motif and leads to the major enantiomeric product via an energetically favorable binap–dihydride–Rh^III–enamide complex. Our theoretical results are consistent with the mechanism that takes place via Rh^III dihydride formation, that is, oxidative addition of H₂ followed by enamide insertion.     

Interactions of Isonitriles with Metal–Boron Bonds: Insertions,Coupling, Ring Formation,and Liberation of Monovalent Boron

Boryl, borylene, and base‐stabilized borylene complexes of manganese and iron undergo a range of different reactions when treated with isonitriles including single, double, and partial isonitrile insertions into metal?boron bonds, ring formation, isonitrile coupling, and the liberation of new monovalent boron species. Two of the resulting cyclic species have also been found to react selectively with anhydrous HCl to form ring‐opened products. The diverse isonitrile‐promoted reactivity of transition‐metal–boron compounds has been explored computationally.