蠕虫状孔道介孔SiO2的合成及其固定化漆酶的活性

以聚环氧乙烷-聚环氧丙烷-聚环氧乙烷三嵌段共聚物(P123)与离子型助表面活性剂{十六烷基三甲基溴化铵(CTAB)、十二烷基硫酸钠(SDS)或N-肉豆蔻酰-D-丙氨酸(C14-D-A)}为结构导向剂,合成了蠕虫状孔道的介孔SiO2,并在P123/C14-D-A/TMAPS(N-三甲氧基硅丙基-N,N,N-三甲基氯化铵)合成反应体系中,研究了扩孔剂聚乙二醇(PEG)-400的不同添加量对蠕虫状孔道的扩孔效果.合成的产物分别用X-射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和N2吸附进行表征.此外,利用溶剂萃取法对扩孔后的蠕虫状介孔SiO2进行处理,得到不同孔径的季铵盐官能团化介孔SiO2,分别用于漆酶的固定化;并对固定化酶的稳定性、所需的最佳pH值以及降解2,4-DCP的重复利用性进行了研究.通过比较研究发现,介孔SiO2孔径与漆酶分子直径的匹配性是影响固定化漆酶比活及降解2,4-DCP效率的重要因素.     

SBA-15介孔分子筛表面的磺酸基改性及其催化性能

 采用后合成方法，将含有巯基的化合物3－巯丙基三甲氧基硅烷（MPTMS）键合在大孔径、厚孔壁的新型纯硅介孔分子筛SBA－15表面上，经氧化和酸化后得到含有强酸性的磺酸基团的固体酸催化剂SBA－15－SO3H．用X射线衍射、红外光谱、固体核磁共振及热失重等方法对改性前后的SBA－15样品进行了表征．结果表明，改性后SBA－15分子筛的结构未发生变化，MPTMS键合于分子筛的表面，改性后的分子筛具有质子酸中心．SBA－15－SO3H催化剂对十八碳烯酸与甲醇的酯化反应具有较高的活性，催化剂上的磺酸基团在反应过程中具有较好的稳定性．     

对环氧化反应具有高催化活性的钛硅介孔分子筛的制备

 使用短链二元羧酸（包括草酸、戊二酸、柠檬酸和酒石酸）为模板剂，采用溶胶－凝胶法合成了具有大比表面积，孔径在3～7nm的钛硅介孔分子筛．EDX和紫外可见漫反射光谱的研究结果表明，所合成的钛硅介孔分子筛中钛的分布均匀，钛物种以孤立态四面体构型为主．本方法所合成的钛硅介孔分子筛对环己烯环氧化反应具有很高的催化活性和选择性．     

苯基磺酸官能化中孔硅基材料的制备及催化性能研究

通过溶胶-凝胶法制得了苯基聚硅氧烷, 进一步磺化制备了苯基磺酸官能化的中孔硅基催化材料, 并通过BET, SEM和固体核磁技术对其进行了表征. BET结果表明, 该催化剂比表面积为722 m²/g, 平均孔径为9.06 nm, 孔容0.59 mL/g. ¹³C CPMAS NMR和²⁹Si CPMAS NMR表征显示磺酸基键合于苯环间位, 苯基以共价方式进入无机-有机杂化硅基材料的内部结构. 该固体酸的活性中心磺酸基在表面呈均匀分布, 在芳族羧酸和取代酚的直接酯化反应中表现出优异的催化性能.     

介孔SiO2负载的纳米金及其催化应用

金（Au）的催化作用已成为催化领域的前沿研究课题。本文综述了近年来采用不同方法制备介孔二氧化硅(MCM-41, MCM-48, SBA-15)负载的纳米Au催化剂以及在CO低温氧化、环己烯加氢和环己烷氧化等反应中的催化作用。讨论了影响纳米Au催化剂活性的相关因素, 包括载体的种类、表面性质、Au纳米颗粒的尺寸、分散度以及稳定性等。最后对各种制备纳米Au的方法进行了总结。     

流动注射分析法测定固定化酶的催化活力

本文介绍了脲酶的固定方法以及用流动注射分析法测定固定化酶的催化活力，测得脲的平均转化率为９５．０％。     

Silica Nanotube Reactors for Catalytic Polymerization of Styrene and Olefins

Summary: Silica nanotube reactor (SNTR) has been designed and used as a novel catalytic polymerization reactor device to synthesize syndiotactic polystyrene (sPS), and polyethylene with Cp*Ti(OCH₃)₃ and rac-Et(indenyl)₂ZrCl₂ metallocene catalysts in conjunction with methylaluminoxane (MAO). The highly crystalline sPS molecules polymerized within the SNTR form nano-scale polymeric fibrils of 30–50 nm in diameter that further intertwine to fill the nanopore. The polymer molecular weight of sPS has been found to increase significantly in the SNTR. A simplified mathematical reaction model for the SNTR suggests that hindered chain transfer reactions in the nanopores filled with rigid polymeric nanofibrils might have caused the extended polymer chain length. The morphological characteristics of polymeric nanofibrils and the effect of SNTR's geometric confinement on the polymer properties are also discussed. It is also demonstrated that the liberated SNTR can be a novel ‘See-Through’ tool for visual observation when it is analyzed by transmission electron microscopy.     

Cu－HMS分子筛的合成条件及其催化性能

 以十二胺（DDA）为模板剂，正硅酸乙酯（TEOS）为硅源，在中性介质中于室温条件下合成了含Cu的中孔杂原子分子筛Cu－HMS．在85℃及常压下，以异丙苯氧化（O2为氧化剂）为探针反应考察了Cu源、Cu／Si摩尔比、DDA／TEOS摩尔比和晶化时间等合成条件对分子筛催化氧化性能的影响．实验结果发现，在Cu／Si摩尔比为0．02～0．03，DDA／TEOS摩尔比为0．1～0．3，晶化时间为1h以上，Cu源为Cu（NO3）2的条件下得到的Cu－HMS分子筛催化活性最高．用XRD，29SiMASNMR，FT－IR，低温N2吸附和原子发射光谱（ICP）等手段对催化活性最高的分子筛样品的结构及表面性质进行了表征，证明该分子筛具有典型的HMS结构，同时发现Cu元素已进入分子筛骨架结构．     

Preparation of Metal Ion-Planted Mesoporous Silica by Template Ion-Exchange Method and Its Catalytic Activity for Asymmetric Oxidation of Sulfide

For the preparation of metal ion-planted MCM-41 we have developed a template ion-exchange method, in which the template ions of as-synthesized MCM-41 are exchanged for the metal ions in aqueous media. The cations of Al, Ti, Cr, Mn, Zn, and Zr could be incorporated with high dispersion, while those of Fe, Co, Ni, Cu, Ga, Pd, and Pt formed small particles on the outside of the MCM-41 particles. Investigation on the time course of the template ion-exchange process suggested that the exchange proceeded first between the template ion and a proton and subsequently between the proton and a metal cation. Among the resulting metal ion-planted MCM-41s, Mn-MCM-41 showed excellent activity for the epoxidation of aromatic olefins. Trans-stilbene oxide was obtained in 93% yield from stilbene in MeCN–DMF solution at 328 K for 96 h. Ti-MCM-41 was the most suitable catalyst for the oxidation of sulfide with H₂O₂. It should be noted that the oxidation proceeded asymmetrically on Ti-MCM-41 in the presence of optically active tartaric acid in a CH₂Cl₂ solution. The chemical yield and optical yield of sulfoxide reached 54 and 30% ee, respectively.     

A Family of Multiply Bonded Dimolybdenum Boraamidinates with the Formal Mo−Mo Bond Orders of 3, 4, 4.5, and 5

A boraamidinato ligand [PhB(N‐2,6‐ⁱPr₂C₆H₃)₂]^2? was employed to stabilize a new family of multiply bonded dimolybdenum complexes [MoCl(μ‐κ²‐PhB(N‐2,6‐ⁱPr₂C₆H₃)₂)]₂ ( 4 ) and [Mo(μ‐κ²‐PhB(N‐2,6‐ⁱPr₂C₆H₃)₂)]₂^n? (n=0 ( 5 ), 1 ( 6 ), 2 ( 7 )), with the respective formal Mo?Mo bond orders of 3, 4, 4.5, and 5. Each metal center in 5 – 7 is two‐coordinate with respect to the ligands. Of particular interest is the quadruply bonded dimolybdenum complex 5 , featuring an unprecedented angular conformation. The bent Mo₂N₄ core of 5 distorts toward planarity upon reduction. As a result, compound 7 features a planar Mo₂N₄ core, while that of 6 is still bent but less significantly than that of 5 . Additionally, the Mo?Mo bond lengths of 4 – 7 systematically decrease as the valency of the central Mo₂ units decreases. Complex 7 features the shortest Mo?Mo bond length (2.0106(5) Å) yet reported.     

介孔Cr-MSU-1的合成、表征及催化性能

以Na2SiO3为硅源, 非离子型表面活性剂脂肪醇聚氧乙烯醚A(EO)9为模板剂合成了介孔Cr-MSU-1, 并通过XRD、HRTEM、N2吸附-脱附、FT-IR和DR UV-Vis等手段对其进行了表征. 结果表明, Cr进入了介孔MSU-1骨架中, 并大部分以四配位的Cr(VI)形式存在. 将Cr-MSU-1作为催化剂用于CO2氧化乙烷脱氢反应, 表现出了良好的催化活性, 650 ℃下乙烷的转化率和乙烯的选择性分别为31.7%和96.1%.     

Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate from Mesoporous Ordered Silica Particles

Summary: Mesoporous silica was used as substrate for the grafting of alkyl halides initiators. The control over the surface‐initiated polymerization of styrene and MMA, in terms of molar mass and molar mass distribution, was successfully achieved using an ATRP mechanism. The occurrence of the polymerization inside the mesopores was confirmed by thermogravimetric analysis.

Transmission electron microscopy and schematic representation of mesoporous silica functionalized by the anchored iniator (left) and the grafted polymer (right).     

Mesoporous Silica Layer: Preparation and Opportunity

Periodic mesoporous silicas, which were prepared from silica‐surfactant mesostructured materials, have been investigated for a wide range of application due to their very large surface area, high porosity, pore size uniformity and variation, periodic pore arrangement and possible pore surface modification, after the pioneering papers on the formation of mesoporous silicas (MCM‐41 and FSM‐16). Morphosyntheses from such macroscopic morphologies as bulk monolith and film to nanoscopic ones, nanoparticles and their stable suspension, make mesoporous materials more attractive for applications and detailed characterization. Mesoporous silicas have been studied initially for such applications as adsorbent and catalyst, and more recently, optical, electronic, and bio‐related applications have been investigated. This review summarizes the studies on mesoporous silica film to highlight the present status and future of the preparation, characterization and application of the mesoporous silica film.     

负载纳米银复合微球制备及其催化性能

以具有温度和pH双重敏感性能的N-异丙基丙烯酰胺(NIPAM)共聚丙烯酸(AA) P(NIPAM-co-AA)高分子微凝胶为模板, 以乙醇为还原剂, 原位还原得到负载纳米银的微米尺度Ag/P(NIPAM-co-AA)复合微凝胶材料. 通过扫描电子显微镜(SEM)、X射线衍射(XRD)仪和紫外-可见(UV-Vis)分光光度计等对复合材料的形貌、组成和催化性能进行表征. 研究结果表明, Ag/P(NIPAM-co-AA)复合微球具有均一的表面结构, 微凝胶的限域作用显著提高了纳米银的分散性和稳定性. 另外, Ag/P(NIPAM-co-AA)复合微球对对硝基苯酚(4-NP)的还原具有较好的催化活性, 且其催化活性与微凝胶网络结构的溶胀、收缩行为有一定关系, 即模板微凝胶的温敏特性可以实现对对硝基苯酚催化反应活性的调控作用.     

Addition Polymerization of Cyclopentadiene in the Presence of Catalytic Systems Based on Pd(0) Complexes and Organic Cocatalysts

Russian Journal of Applied Chemistry - Addition polymerization of cycloalkenes (cyclopentene, cyclopentadiene, cyclooctene, cyclooctadiene) in the presence of a new type of catalytic...     

介孔硅铝酸盐的合成及其在傅克反应中的催化性能

采用溶胶凝胶法合成了一系列有序性好且酸性较强的介孔硅铝酸盐材料。利用X射线粉末衍射(XRD)、透射电镜(TEM)、²⁷Al核磁共振(²⁷Al NMR)、氨气程序升温脱附(HN₃-TPD)及吡啶吸附红外光谱(Py-FT-IR)对制备的介孔硅铝酸盐材料的结构和性能进行表征,并考察了材料在苯甲醚和苯甲醇的傅克烷基化反应中的催化活性。实验结果表明：合成过程中,表面活性剂的用量、硅铝物质的量的比会影响材料结构的有序性,醋酸用量对材料结构有序性影响很小;进一步研究结果表明,n_Si / n_Al比会影响材料的酸催化活性,当n_Si / n_Al=10时材料的酸催化活性最高。氨气程序升温脱附和吡啶吸附红外光谱表明n_Si / n_Al=10的材料含有最多的B酸酸量。     

介孔分子筛SBA-15中α-胰凝乳蛋白酶组装及催化活性研究

介孔分子筛由于规则孔道或笼的存在 ,使其具有择形催化作用、高比表面积和强吸附性能 ,其孔道中可组装多种物质而改变其理化性能 .Thomas等 [1] 在介孔 Si O2 上接枝金属茂复合物 .白妮 [2 ] 和张雪峥 [3 ] 等分别将脂溶性金属酞菁衍生物和杂多酸封装在介孔分子筛中 ,得到的组装体催化性能优良 .近年来由于不断合成出 MCM- 41 [4 ] 和 SBA- 1 5 [5] 等孔径较大的介孔分子筛 ,使在介孔材料孔道中组装生物大分子成为可能 .Yen等 [6] 将细胞色素 c组装到孔道中 ,并使酶的稳定性得到提高 ,而α-胰凝乳蛋白酶 (Mr=2 5 0 0 0 ,分子动力学直径…     

介孔硅铝酸盐的合成及其在傅克反应中的催化性能

采用溶胶凝胶法合成了一系列有序性好且酸性较强的介孔硅铝酸盐材料。利用X射线粉末衍射(XRD)、透射电镜(TEM)、27Al核磁共振(27Al NMR)、氨气程序升温脱附(HN3-TPD)及吡啶吸附红外光谱(Py-FT-IR)对制备的介孔硅铝酸盐材料的结构和性能进行表征,并考察了材料在苯甲醚和苯甲醇的傅克烷基化反应中的催化活性。实验结果表明:合成过程中,表面活性剂的用量、硅铝物质的量之比会影响材料结构的有序性,醋酸用量对材料结构有序性影响很小;进一步研究结果表明,nSi/nAl比会影响材料的酸催化活性,当nSi/nAl=10时材料的酸催化活性最高。氨气程序升温脱附和吡啶吸附红外光谱表明nSi/nAl=10的材料含有最多的B酸酸量。     

Synthesis, Characterization and Catalytic Activity of Sn-SBA-15 Mesoporous Molecular Sieves

Our recent reports on the synthesis of Sn-incorporated mesoporous SBA-15 materials have been reviewed. The preparation of the samples with different Si/Sn ratios followed two procedures, the first is the post-synthesis modification of SBA-15 by impregnation with Sn chloride or acetate, and the second is the direct method in which Sn chloride was introduced in to Si precursor along with amphiphilic triblock copolymer, while varying the ratio of the synthesis gel. Detailed characterization of the Sn-SBA-15 samples by a variety of techniques shows how the synthesis procedures influence the properties of the samples that reflect on the differences in (a) the structural features, (b) morphology and textural properties, such as the pore characteristics, (c) the possible location of Sn⁴⁺ ions in the meso silica structure and their reducibility, (d) the nature of the Sn species and their the coordination sphere and (e) the acid–base characteristics. We developed a possible model for the localization of Sn species in SBA-15 pore structure for different conditions of preparation. This report includes our investigations on the catalytic properties of these Sn-SBA-15 samples in 3 industrially important reactions, viz., trans-esterification of diethyl malonate, synthesis of nopol by Prins condensation of β-pinene with para-formaldehyde and the epoxidation of norbornene. In each of this reaction, while demonstrating the catalytic role of Sn species, we show that the requirement of the type and the environment of Sn species are different for these reactions.