Current advances in molecularly imprinted polymers and their release mechanisms in drug delivery systems

Molecularly imprinted polymer (MIP) has gained wide interest among researchers due to its unique molecular recognition of the template that is suitable as a drug carrier. Therefore, the preparation and formulation of the MIP are significant to suit the needs of the intended use. Due to its significance in drug delivery, this review aims to highlight various methods in the preparation of MIP, the composition for both controlled and stimuli-responsive drug delivery systems, and the release mechanism of the drugs. In drug delivery systems, MIP should have a sustained release performance as well as flexibility in surface modification for targeted delivery via a range of stimuli-responses, including  external stimuli (magnetic, light) and internal stimuli (pH, temperature, redox, biological). The properties of sustained release and targeted delivery of the MIP can improve the drug's therapeutic efficacy as well as the breakthrough for the tumor targeting application.     

Novel drug delivery device using silicone: controlled release of insoluble drugs or two kinds of water-soluble drugs

Drug release mechanism from silicone carrier differs depending on physicochemical properties of the drug. So far, there have been few reports on controlled release of insoluble drug and on simultaneous release of two kinds of water-soluble drugs. The purposes of this study are to establish methods for (1). continuous release of insoluble drug, and (2). release of two kinds of water-soluble drugs from silicone carrier. Polystyrene beads (PSTB) and proteins such as interferon (IFN) and human serum albumin (HSA) were used as model drugs. PSTB was released from silicone only when citric acid (CA) and sodium bicarbonate (SB) existed as additives. The release patterns of IFN and HSA were almost same in the case of matrix and covered-rod formulations, but double-layered formulation released them in different patterns. As far as we are aware, this is the first report on the release of insoluble drug from silicone and the controlled release of two kinds of water-soluble drugs.     

Mesoporous silica nanoparticles for 19F magnetic resonance imaging,fluorescence imaging,and drug delivery

Multifunctional mesoporous silica nanoparticles (MSNs) are good candidates for multimodal applications in drug delivery, bioimaging, and cell targeting. In particular, controlled release of drugs from MSN pores constitutes one of the superior features of MSNs. In this study, a novel drug delivery carrier based on MSNs, which encapsulated highly sensitive ¹⁹F magnetic resonance imaging (MRI) contrast agents inside MSNs, was developed. The nanoparticles were labeled with fluorescent dyes and functionalized with small molecule-based ligands for active targeting. This drug delivery system facilitated the monitoring of the biodistribution of the drug carrier by dual modal imaging (NIR/¹⁹F MRI). Furthermore, we demonstrated targeted drug delivery and cellular imaging by the conjugation of nanoparticles with folic acid. An anticancer drug (doxorubicin, DOX) was loaded in the pores of folate-functionalized MSNs for intracellular drug delivery. The release rates of DOX from the nanoparticles increased under acidic conditions, and were favorable for controlled drug release to cancer cells. Our results suggested that MSNs may serve as promising ¹⁹F MRI-traceable drug carriers for application in cancer therapy and bio-imaging.     

Novel Carboxymethyl Chitosan Microspheres for Controlled Delivery of Chelerythrine

Novel carboxymethyl chitosan (O-CMCS) microspheres containing an anti-tumor drug chelerythrine (CHE) have been successfully prepared by an emulsion crosslinking method using glutaraldehyde. The optimized microsphere formulation was characterized for particle size, shape, morphology, crystallinity and in vitro drug release. Results for mean particle size, drug loading content, entrapment efficiency and in vitro drug release of chelerythrine loaded microspheres were found to be 12.18 μm, 4.08%, 54.78% and 35.30% at pH 7.4 in 20 h, respectively. The optimized microspheres had an imperfect crystalline lattice and a spherical, rough morphology and the CHE release from O-CMCS microspheres followed the Higuchi matrix model. All these results suggested that O-CMCS microspheres are a promising carrier system for controlled drug delivery.     

Multiple-mRNA-controlled and heat-driven drug release from gold nanocages in targeted chemo-photothermal therapy for tumors

Multifunctional drug delivery systems enabling effective drug delivery and comprehensive treatment are critical to successful cancer treatment. Overcoming nonspecific release and off-target effects remains challenging in precise drug delivery. Here, we design triple-interlocked drug delivery systems to perform specific cancer cell recognition, controlled drug release and effective comprehensive therapy. Gold nanocages (AuNCs) comprise a novel class of nanostructures possessing hollow interiors and porous walls. AuNCs are employed as a drug carrier and photothermal transducer due to their unique structure and photothermal properties. A smart triple-interlocked I-type DNA nanostructure is modified on the surface of the AuNCs, and molecules of the anticancer drug doxorubicin (DOX) are loaded as molecular cargo and blocked. The triple-interlocked nanostructure can be unlocked by binding with three types of tumor-related mRNAs, which act as “keys” to the triple locks, sequentially, which leads to precise drug release. Additionally, fluorescence-imaging-oriented chemical–photothermal synergistic treatment is achieved under illumination with infrared light. This drug delivery system, which combines the advantages of AuNCs and interlocked I-type DNA, successfully demonstrates effective and precise imaging, drug release and photothermal therapy. This multifunctional triple-interlocked drug delivery system could be used as a potential carrier for effective cancer-targeting comprehensive chemotherapy and photothermal therapy treatments.

Schematic illustration of the multiple-mRNA-controlled and heat-driven drug release from gold nanocages.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

A green chemistry approach towards synthesizing hydrogel for sustained ocular delivery of brinzolamide: In vitro and ex vivo evaluation

Brinzolamide is a carbonic anhydrase inhibitor used in the eye drop form for the treatment of glaucoma. It requires frequent dosing to attain therapeutic concentration. Therefore, this study aimed to prepare sustained ocular drug delivery of brinzolamide. The objective of the study was to prepare a hydrogel loaded with a nanostructured lipid carrier (NLC) of brinzolamide. The hydrogel was prepared by a green synthesis approach using genipin as a natural crosslinking agent and polymers such as carboxymethyl chitosan and poloxamer 407. The melt emulsification-ultra sonication method was used to prepare a nanostructured lipid carrier of brinzolamide, which was loaded into a hydrogel using a swelling and loading method. The NLC formulation has shown small particle sizes of 111.20 ?± ?2.15 ?nm, polydispersity index of 0.280 ?± ?0.005 and % entrapment efficiency of 82.16% ?± ?0.14%. The NLC-loaded hydrogels of brinzolamide formulations were studied for swelling properties and showed temperature and pH-responsive swelling behavior. The optimized hydrogel formulation has been studied for in vitro drug release and showed drug release for a longer duration (24 ?h) than marketed eye drops (8 ?h). In an ex vivo study, hydrogel formulations showed transcorneal permeability 4.54 times greater than marketed eye drops. The hydrogel formulation of brinzolamide produced by the green synthesis method has shown sustained-release properties with no sign of ocular irritation. Hence, the hydrogel of brinzolamide-loaded NLC would be the potential drug delivery approach in the near future for sustained ocular drug delivery in glaucoma management.     

Isosorbide‐based polysebacates as polymeric components for development of in situ forming implants

In situ forming implants (ISFIs) appear to be a convenient drug delivery system, alternative to conventional preformed implants and microparticles for parenteral drug delivery applications. It has been shown that they offer several advantages including easy and minimally invasive application, potential for local/site‐specific drug delivery that allows reduction of side effects associated with systemic administration of drug. A few ISFI formulations based on poly(α‐hydroxy acids), solidifying by solid phase separation, are currently commercially available. In this work, polyesters based on sebacic acid, isosorbide, and optionally 1,2‐propanediol were synthesized and characterized. Poly(isosorbide sebacate‐co‐1,2‐propylene sebacate) (PISEBPG) was chosen as an essential constituent of new ISFI formulations dedicated to controlled release of doxycycline hyclate (DOXY). Basic characteristics of new ISFI formulations were investigated. In particular, the influence of addition of a relatively hydrophobic cosolvent (triacetin, TA) to a more hydrophilic 1‐methyl‐2‐pyrrolidone (NMP) as well as the presence of calcium carbonate (CAC) on the morphology of resulted depots and DOXY release profile was evaluated. Scanning electron microscopy (SEM) analysis revealed that the presence of TA resulted in more porous morphology of the depots. DOXY has been releasing continuously from depots in vitro within 12 weeks depending on the composition. The release profile of the PISEBPG‐based formulation containing CAC indicates that it could be useful where short‐term (up to 14 d), rapid release of the antibiotic is required, while formulation without CAC, where after 21 days about 50% of the drug loaded may still be available for release, may be better for the long‐term delivery of DOXY.     

Electrospun nanofibers for drug delivery applications: Methods and mechanism

Electrospinning procedures such as blend electrospinning, coaxial electrospinning, and emulsion electrospinning have been used for the fabrication of electrospun nanofibers (ENFs) for biomedical applications. These ENFs are attracted great interest especially in drug delivery applications due to their small size, high surface area-to-volume, and porosity. The aim of this review is to focus on the controlled release mechanism among the different electrospinning methods, and the selectivity of hydrophilic, water-soluble polymers as a carrier for drug. The mechanism for the drug delivery depends mainly on the method of drug loading, polymeric interactions, and the nature of polymer swelling, erosion, or degradation. This review compressed on the literature survey about the fabrication of nanofibers by different electrospinning methods, factors affecting the nanofiber morphologies, selectivity of polymeric blends for successful controlled release behavior, and the mechanism involved in the drug release steps.     

Film‐ and ointment‐based delivery systems for the transdermal delivery of TNP‐470

Pathological angiogenesis, the process of new blood vessel formation, is responsible for a broad range of neovascular‐related systemic diseases. One of the first antiangiogenic compounds tested in clinical trials against cancer was TNP‐470. Despite promising activity the injectable drug showed poor plasma stability and caused adverse side effects in high doses lead to termination of the trials. In our current work, we introduce the development of a transdermal delivery systems for controlled release of TNP‐470. Such formulation can potentially reduce toxicity due to controlled continuous dosing and improve stability by avoiding gastrointestinal first pass metabolism. Although transdermal delivery is a very challenging route for drug administration due to the low permeability of the skin, here we present a successful development of two different drug delivery systems, film and ointment for dermal application of TNP‐470. Chitosan film had high loading capacity of up to 50% w/w of TNP‐470 compared with 10% maximum loading in hydrocarbon ointment. A detailed step‐by‐step development of TNP‐470 films, from the initial solvent screening to final optimized formulation, is presented. Ex vivo skin permeation studies demonstrated a superior release of the drug from the film formulation compared with the ointment. Furthermore, histological test of the skin confirmed ointment safety showing no evidence of skin tissues damage. Our results present novel, promising, controlled release drug delivery systems with improved stability, efficacy, and safety profile of TNP‐470 via transdermal route.     

Exploring the Interplay between Drug Release and Targeting of Lipid-Like Polymer Nanoparticles Loaded with Doxorubicin

Targeted delivery of doxorubicin still poses a challenge with regards to the quantities reaching the target site as well as the specificity of the uptake. In the present approach, two colloidal nanocarrier systems, NanoCore-6.4 and NanoCore-7.4, loaded with doxorubicin and characterized by different drug release behaviors were evaluated in vitro and in vivo. The nanoparticles utilize a specific surface design to modulate the lipid corona by attracting blood-borne apolipoproteins involved in the endogenous transport of chylomicrons across the blood–brain barrier. When applying this strategy, the fine balance between drug release and carrier accumulation is responsible for targeted delivery. Drug release experiments in an aqueous medium resulted in a difference in drug release of approximately 20%, while a 10% difference was found in human serum. This difference affected the partitioning of doxorubicin in human blood and was reflected by the outcome of the pharmacokinetic study in rats. For the fast-releasing formulation NanoCore-6.4, the AUC_0→1h was significantly lower (2999.1 ng × h/mL) than the one of NanoCore-7.4 (3589.5 ng × h/mL). A compartmental analysis using the physiologically-based nanocarrier biopharmaceutics model indicated a significant difference in the release behavior and targeting capability. A fraction of approximately 7.310–7.615% of NanoCore-7.4 was available for drug targeting, while for NanoCore-6.4 only 5.740–6.057% of the injected doxorubicin was accumulated. Although the targeting capabilities indicate bioequivalent behavior, they provide evidence for the quality-by-design approach followed in formulation development.     

Chitosan nanoparticles of 5-fluorouracil for ophthalmic delivery: characterization, in-vitro and in-vivo study

The aim of this investigation was to develop 5-fluorouracil (5-FU) loaded chitosan nanoparticles (CH-DNPs) for ophthalmic delivery. CH-DNPs were fabricated by ionotropic gelation mechanism using chitosan (CH) and a polyanion (TPP). The nanoparticles were smooth and spherical, confirmed by scanning electron microscopy (SEM) and atomic force microscope (AFM). CH/TPP mass ratio and TPP significantly changed the particles size morphology and encapsulation efficiency. The nanoparticles size ranged from approximately 114 to 192 nm and had a positive zeta potential (30±4 mV). The encapsulation efficiency, loading capacity and recovery of DNPs were 8.12-34.32%, 3.14-15.24% and 24.22 to 67% respectively. Physical characterization was done by Fourier transform infrared (FT-IR) and X-ray diffraction (XRD). No interaction was observed in between drug and polymer and crystallinity of drug was not changed in drug loaded nanoparticles. In-vitro release study of DNPs showed diffusion controlled release. Bioavailability study of batch CS9 was studied in rabbit eye and compare to 5-FU solution. 5-FU level was significantly higher in aqueous humor of rabbit eye. Ocular tolerance was studied in the eye of New Zealand rabbits and tested formulation was non-irritant with no sign of inflammation.     

Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A

A novel copolymer P(CS–Ma–DMAEMA) was synthesized with chitosan (CS), maleic anhydride (Ma) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) by grafting and copolymerization. The copolymer obtained was analyzed by FT-IR, ¹H NMR and UV, and the molecular weight and polydispersity were determined by gel permeation chromatography (GPC). The average size and distribution of copolymer micelles were determined by dynamic light scattering (DLS). Their aqueous solution properties and controlled coenzyme A delivery were also studied. It was found that the copolymer had temperature sensitivity and pH sensitivity. The factors affecting release behavior, such as concentration, pH and temperature were discussed in this paper. The higher concentration of the copolymer aqueous solution absorbed more coenzyme A than the lower one. The increasing temperature accelerated the drug release from the copolymer. The pH of the copolymer solution had significant impact on the release of coenzyme A. The results suggested that the novel copolymer could be used as drug delivery carrier.     

Synthesis and characterization of a pH responsive and mucoadhesive drug delivery system for the controlled release application of anti-cancerous drug

In this work a novel pH sensitive composite, polyacrylamide grafted succinyl chitosan intercalated bentonite (AAm-g-NB/SC) was prepared as a drug carrier system for the controlled delivery of paclitaxel. Characterization of the drug delivery system was carried out using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal analysis etc. The equilibrium swelling behaviour of the composite was studied and the result showed a maximum at pH 7.4. The in vitro drug release study of paclitaxel indicated that about 15.6% of drug release was found to be occurred at pH 1.2 within 16 h, whereas about 82.5% of drug release was occurred at the intestinal pH condition of 7.4. In vitro biocompatibility study was performed and the result showed good biocompatibility of the composite in the concentration range 6.25–100 µg/mL. The cytotoxicity assay was carried out in cancerous cell line of Human colorectal Adenocarcinoma. Mucous glycoprotein assay study showed that the drug delivery system having good apparent adhering property towards mucin. The investigation indicated that paclitaxel, an anticancer drug can be successfully entrapped in the AAm-g-NB/SC composite for the controlled and targeted delivery for colorectal cancer therapy.     

Model-Based Nanoengineered Pharmacokinetics of Iron-Doped Copper Oxide for Nanomedical Applications

The progress in nanomedicine (NM) using nanoparticles (NPs) is mainly based on drug carriers for the delivery of classical chemotherapeutics. As low NM delivery rates limit therapeutic efficacy, an entirely different approach was investigated. A homologous series of engineered CuO NPs was designed for dual purposes (carrier and drug) with a direct chemical composition–biological functionality relationship. Model-based dissolution kinetics of CuO NPs in the cellular interior at post-exposure conditions were controlled through Fe-doping for intra/extra cellular Cu²⁺ and biological outcome. Through controlled ion release and reactions taking place in the cellular interior, tumors could be treated selectively, in vitro and in vivo. Locally administered NPs enabled tumor cells apoptosis and stimulated systemic anti-cancer immune responses. We clearly show therapeutic effects without tumor cells relapse post-treatment with 6 % Fe-doped CuO NPs combined with myeloid-derived suppressor cell silencing.     

温度敏感型树枝状大分子衍生物的合成及药物控制释放

通过加入偶联剂活化末端羧基基团进行酰胺化反应, 将得到的带有羧基末端基团的温敏性聚N-异丙基丙烯酰胺接枝到整代的树枝状大分子聚酰胺-胺(PAMAM)上, 制备了树枝状大分子衍生物PAMAM-g-PNIPAm, 通过FTIR和¹H NMR表征其结构, 通过GPC和¹H NMR测定其分子量, 从而验证了接枝产物的形成; 通过紫外-可见分光光度计测定其在不同pH值缓冲液中的低临界溶胀/溶解温度(LCST)值, 发现产物的LCST值受缓冲液pH值的影响很大, 接枝前后的LCST值也发生了变化. 选用难溶性药物吲哚美辛作为模型药物, 考察了树枝状大分子及其温度敏感性衍生物PAMAM-g-PNIPAm作为载体对药物的包载、增溶和不同温度环境下的释放行为. 结果表明, 树枝状大分子衍生物对吲哚美辛具有增溶和控制释放的性能, 在难溶性药物的控制释放领域具有广阔的应用前景.     

Progress in natural polymer engineered biomaterials for transdermal drug delivery systems

The route of a specific drug carrier system is always a significant platform of development that combines the principles of biomedical technology, nanotechnology, and pharmaceutical drug design. Transdermal (TD) drug delivery involves the release of the drug via the stratum corneum of the tissue membrane into the sustained release by diffusion across the epidermal layer. This method (often known as topical drug delivery) has increased noteworthy research enthusiasm in the course of recent decades due to its relatively simpler and non-invasive administration. Over the past few decades, considerable advancement was achieved in TD delivery and a number of drugs are now successfully reported. In this review, we focus on the progress regarding applications of important biopolymers described for the TD drug release applications and related aspects. Three mostly reported plant and animal-derived polymers (such as natural rubber, chitosan, and cellulose for the development of TD carrier system) were extensively analyzed. The general principle of TD drug delivery, advantages, and limitations of the works reported were also discussed.     

Synthesis of Polynucleotide Modified Gold Nanoparticles as a High Potent Anti‐Cancer Drug Carrier

Gold nanoparticles have been developed for the photoacoustic imaging, delivery of genes and laser induced photothermal therapy. In this study, we have developed oligonucleotide conjugated gold nanoparticles as the carrier for simultaneous DNA and anti‐cancer nucleoside delivery. The polynucleotidenanoparticle complex presented higher capacity in carrying 5‐FU anti‐cancer compounds than the original gold particles. The hydrodynamic size of the gold nanoparticles increased from 25 to 35 nm with an increase in the negative surface charge from ?9.58 to 21.66 mV after polynucleotide conjugation and drug loading. A positive association between environmental pH and drug release was observed in PBS, which implied their potential use in the controlled localized drug release in the lower GI tract. The MTT assay revealed dose dependent cytotoxicity to colon cancer cell line than free compounds. These results suggest the potential use of this new polynucleotide‐gold nanoparticles complex as the environmental controlled anti‐cancer nanocapsule, especially suitable for per oral colon cancer chemotherapy.     

Polymer Micro‐ and Nanocapsules as Biological Carriers with Multifunctional Properties

The design and development of multifunctional polymer capsules with controlled chemical composition and physical properties has been the focus of academic and industrial research in recent years. Especially in the biomedical field, the formulation of novel polymer‐based encapsulation systems for the early‐stage disease diagnostic and effective delivery of bioactive agents represent one of the most rapidly advancing areas of science. The stimuli‐responsive release of cargo molecules from the carrier gains remarkable attention for in vitro and in vivo delivery of contrast agents, genes, and pharmaceutics. In this Review, the current status and the challenges of different polymer‐based micro‐ and nanocapsule formulations are considered, emphasizing on their potential biological application as carriers for specific drug targeting and controlled release upon applying of external stimulus.